Surface Mount Monolithic Amplifier DC-4 GHz Product Features * DC-4 GHz * Single Voltage Supply * Internally matched to 50 Ohm * Unconditionally Stable * Low Performance Variation Over Temperature * Transient protected * Aqueous washable * Protected by US Patent 6,943,629 ERA-5SM+ CASE STYLE: WW107 PRICE: $3.90 ea. QTY. (30) + RoHS compliant in accordance with EU Directive (2002/95/EC) Typical Applications * Cellular/ PCS/ 3G Base Station * CATV, Cable Modem & DBS * Fixed Wireless & WLAN * Microwave Radio & Test Equipment The +Suffix has been added in order to identify RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. General Description ERA-5SM+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot. It is enclosed in an Micro-X package. ERA-5SM+ uses Darlington configuration and is fabricated using InGaP HBT technology. Expected MTBF is 850 years at 85C case temperature. simplified schematic and pin description RF-OUT and DC-IN RF-OUT and DC-IN RF IN GND GND RF IN GROUND Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in "Recommended Application Circuit". GND 2,4 Connections to ground. Use via holes as shown in "Suggested Layout for PCB Design" to reduce ground path inductance for best performance. Mini-Circuits (R) EW ALL N minicircuits.com ISO 9001 ISO 14001 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com RF/IF MICROWAVE COMPONENTS Rev. P M117811 ERA-5SM+ 080516 Page 1 of 4 ERA-5SM+ Monolithic InGaP HBT MMIC Amplifier Electrical Specifications at 25C and 65mA, unless noted Parameter Min. Frequency Range* DC Gain f=0.1GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz 19 16 12 Typ. Max. Units 4 GHz 20.2 19.5 17.6 15.6 14 22 dB .005 .007 .0085 .0105 .013 Cpk >1.5 19 16 Magnitude of Gain Variation versus Temperature (values are negative) f=0.1GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz .0025 .0034 .0043 .0052 .0065 Input Return Loss f=0.1 GHz f=2 GHz f=4 GHz 21 23 21 dB Output Return Loss f=0.1 GHz f=2 GHz f=4 GHz 30 26 17 dB 19 22 dB 16.5 16.5 15.5 18.4 18.4 17 12.5 dBm 19.5 18.5 18 dBm 33 33 30 26 dBm >1.5 dB >1.5 Reverse Isolation f=2 GHz Output Power @1 dB compression f=0.1 GHz f=1 GHz f=2 GHz f=4 GHz Saturated Output Power (at 3dB compression) f=0.1 GHz f=1 GHz f=2 GHz Output IP3 f=0.1 GHz f=1 GHz f=2 GHz f=4 GHz Noise Figure f=0.1GHz f=2 GHz f=4 GHz 3.5 3.5 3.5 Group Delay f=2 GHz 90 30 30 26 4.5 4.5 4.5 Device Operating Voltage 4.5 >1.5 psec 65 Recommended Device Operating Current dB/C mA 4.9 5.3 V Device Voltage Variation vs. Temperature at 65mA -3.2 mV/C Device Voltage Variation vs. Current at 25C 6.9 mV/mA 133 Thermal Resistance, junction-to-case1 *Guaranteed specification DC-4 GHz. Low frequency cut off determined by external coupling capacitors. >1.5 C/W Absolute Maximum Ratings Parameter Ratings Operating Temperature* -45C to 85C Storage Temperature -65C to 150C Operating Current 85mA Power Dissipation 451mW Input Power 13 dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1 Case is defined as ground leads. *Based on typical case temperature rise 10C above ambient. Mini-Circuits (R) EW ALL N minicircuits.com ISO 9001 ISO 14001 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com RF/IF MICROWAVE COMPONENTS Page 2 of 4 ERA-5SM+ Monolithic InGaP HBT MMIC Amplifier Product Marking E5 Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Performance data, graphs, s-parameter data set (.zip file) Case Style: WW107 Plastic micro-x, .085 body diameter, lead finish: tin/silver/nickel Tape & Reel: F4 Suggested Layout for PCB Design: PL-075 Evaluation Board: TB-408-5+ Environmental Ratings: ENV08T2 Recommended Application Circuit Rbias (Required) Vcc R BIAS Vcc "1%" Res. Values (ohms) for Optimum Biasing 7 8 9 10 11 12 13 14 15 16 17 18 19 20 33.2 48.7 63.4 78.7 95.3 110 124 140 158 174 187 205 221 232 Cbypass Cblock IN 4 Ibias 3 RFC (Optional) Vd 1 2 OUT Cblock Test Board includes case, connectors, and components (in bold) soldered to PCB Mini-Circuits (R) EW ALL N minicircuits.com ISO 9001 ISO 14001 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com RF/IF MICROWAVE COMPONENTS Page 3 of 4 ERA-5SM+ Monolithic InGaP HBT MMIC Amplifier ESD Rating Human Body Model (HBM): Class 1B (500 v to < 1,000 v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (< 100 v) in accordance with ANSI/ESD STM 5.2 - 1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C NO. TEST REQUIRED CONDITION STANDARD QUANTITY 1 Visual Inspection Low Power Microscope Magnification 40x MIP-IN-0003 (MCT spec) 45 units 2 Electrical Test Room Temperature SCD (MCL spec) 45 units 3 SAM Analysis Less than 10% growth in term of delamination J-Std-020C (Jedec Standard) 45 units 4 Moisture Sensitivity Level 1 Bake at 125C for 24 hours Soak at 85C/85%RH for 168 hours Reflow 3 cycles at 260C peak J-Std-020C (Jedec Standard) 45 units MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260C Soak 85C/85RH 168 hours Bake at 125C, 24 hours Visual Inspection Electrical Test SAM Analysis Mini-Circuits (R) EW ALL N minicircuits.com ISO 9001 ISO 14001 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com RF/IF MICROWAVE COMPONENTS Page 4 of 4