
Universal AC input / Full range
Built-in active PFC function, PF>0.94
Protections: Short circuit / Overload / Over voltage / Over temperature
Output voltage programmable from 20~110% by 1~5.5VDC external
control signal
Fixed switching frequency at 100KHz
3 years warranty
Cooling by free air convection
Built-in remote ON-OFF control
SPECIFICATION
SPV-150-24
SPV-150-12 SPV-150-48
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
RIPPLE&NOISE(max.) Note.2
OUTPUT VOLTAGE ADJ.RANGE
VOLTAGETOLERANCE Note.3
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE Note.5
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
ENVIRONMENT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
REMOTECONTROL
OUTPUTVOLTAGETRIM
OVERTEMPERATURE
SAFETY STANDARDS
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
PROTECTION
24V12V 48V
6.25A12.5A 3.125A
0~6.25A0~12.5A 0~3.125A
150W150W 150W
150mVp-p150mVp-p 240mVp-p
20~26.4V
10.8~13.2V
41~52.8V
1.0%1.0% 1.0%
0.2%0.3% 0.2%
0.5%0.5% 0.5%
800ms,50ms/230VAC2500ms,50ms/115VACatfullload
16ms/230VAC16ms/115VACatfullload
88~264VAC124~370VDC
47~63Hz
PF>0.94/230VACPF>0.98/115VACatfullload
83%82% 83%
57.6~67.2V
9.6~52.8V
20A/115VAC40A/230VAC
<1mA /240VAC
4~10VDCpoweroff,<0~0.8VDCpoweron
105~150%ratedoutputpower
27.6~32.4V
4.8~26.4V
13.8~16.2V
2.4~13.2V
Protectiontype:Constantcurrentlimiting,recoversautomaticallyafterfaultconditionisremoved
Protectiontype:Shutdowno/pvoltage,re-powerontorecover
80 5 (TSW1:detectonheatsinkofpowertransistor)
Protectiontype:Shutdowno/pvoltage,recoversautomaticallyaftertemperaturegoesdown
UL60950-1, TUVEN60950-1approved
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH
-20~+65 (Refertooutputloadderatingcurve)
20~90%RHnon-condensing
-40~+85 ,10~95%RH
0.03%/ (0~50
10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes
207Khrsmin.MIL-HDBK-217F(25 )
215*115*50mm(L*W*H)
1.1Kg;12pcs/14Kg/0.92CUFT
FileName:SPV-150-SPEC2010-10-18
Features :
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
SPV-150 series
150WSingleOutputwithPFCFunction
FUNCTION
HARMONICCURRENT
EMICONDUCTION&RADIATION
EMSIMMUNITY
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,lightindustrylevel,criteria A
SAFETY
EMC
(Note4)
ACCURRENT (Typ.) 2.5A/115VAC1.25A/230VAC
http://store.iiic.cc/