littelfuse.com© 2019 Littelfuse Revised: 02/08/19
Specifications are subject to change without notice.
Reed Sensors
Firecracker > 59010
59010 Sub-Miniature Firecracker Reed Sensor + 57020 Actuator
Electrical Ratings
Contact Type Normally Open
Switch Type 1
Contact Rating 1VA/Watt - max. 5
Voltage 4
Switching 2
Breakdown 3
Vdc - max.
Vac - max.
Vdc - min.
175
140
200
Current 4
Switching 2
Carry
Adc - max.
Aac - max
Adc - max.
0.35
0.25
0.50
Resistance 5Contact, Initial
Insulation
Ω - max.
Ω - min.
0.550
1012
Capacitance Contact pF - typ. 0.45
Temperature Operating °C -40 to +85
Product Characteristics
Operate Time 6ms - max. 0.35
Release Time 6ms - max. 0.03
Shock 711ms ½ sine G - max. 50
Vibration 710-2000 Hz G - max. 10
Notes:
1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Breakdown Voltage - per MIL-STD-202, Method 301.
4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens.
6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II).
7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.
8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse.
Sensitivity Options (Using 57020 Actuator)
Select Option S T
Switch Type Pull-In AT Range Activate Distance - D
mm (inch)
Average Pull-In AT Range Activate Distance - D
mm (inch)
Average
1Normally Open 6-10 6.3 (.248) 10-15 4.9 (.193)
Note:
1. Pull-In AT Range: These AT values are the bare reed switch AT before modification.
2. The activation distance is average value on the final sensor assembly.
D
Sensor Actuator