Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D5DA782M0K2J6 Features Item Summary SAW, Duplexer, 1.8x1.4x0.5mm Band13 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions LTE Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.5 mm band Band13 Insertion Loss (typ) 1.9/1.7 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 58/61 dB Operating Temp. Range -20 to +85 RoHS2 Compliance (10 subst.) Yes REACH Compliance (173 subst.) Yes Halogen Free Yes Soldering Reflow 2017.08.14 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the data at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Table 1. Item Tx to ANT Insertion loss Ripple Tx VSWR Ant Input Power Absolute attenuation ANT to Rx Insertion loss Ripple Ant VSWR Rx Absolute attenuation Tx to Rx Isolation Terminating Impedance Specification Min 777 - 787 777 - 787 777 - 787 777 - 787 - 746 - 756 758 - 768 768 - 775 1554 - 1565 1565 - 1607 2331 - 2361 2400 - 2484 3108 - 3148 4900 - 5950 Final Electrical Specification Condition (MHz) 777 - 787 Jun.11, 2015 Typ Max 1.9 2.5 0.8 1.6 1.6 2.0 1.6 2.0 +29dBm Ta=+50deg.C ,50kh,CW 44 51 10 32 1 2.5 41 46 41 46 35 53 40 50 23 28 8 12 - Unit dB (*1) dB dB dB dB dB dB dB dB dB dB 746 - 756 746 - 756 746 - 756 746 - 756 777 - 787 2400 - 2500 787 - 6000 50 40 23 1.7 0.4 1.4 1.5 62 45 28 2.3 1.0 2.0 2.0 - dB (*1) dB dB dB dB 746 - 756 777 - 787 52 56 58 61 - dB dB Tx port Rx port Ant port Operating Temperature Device size (L max. x W max. x H max.) 50 50 50 // 12nH (Q=) Ohm Ohm Ohm -20 to +85 oC 1.8 x 1.4 x 0.5 mm (*1) Specification of insertion loss excludes loss that comes from the test board. Remarks Single-ended Single-ended Single-ended Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Jun.11, 2015 Final Dimensions 0.5max. max <7> <5> <6> <8> index <1> <5> <4> <2> <6> <4> <3> < Side View > <8> <2> <1> < Bottom View > Unit: mm <3> < Top View > <7> Pin Configuration Pin No. Pin name Description 1 Rx Receiver Pin 2 GND Ground Pin 3 Tx Transmitter Pin 4 GND Ground Pin 5 GND Ground Pin 6 ANT Antenna Pin 7 GND Ground Pin 8 GND Ground Pin Figure 1. Dimensions and Pin assignment Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Jun.11, 2015 Final Evaluation Circuit ANT (50ohm) L=12 nH (Q=) 6 RX (50ohm) 1 TX 3 2,4,5,7,8 Recommended foot print pattern Common GND External appearance in Chip carrier :Pad pattern :Resist pattern Figure 2. Recommended foot print pattern Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. Jun.11, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board. Jun.11, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Tx Port Figure 3-3. Electrical Characteristics Jun.11, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Rx Port Figure 3-4. Electrical Characteristics Jun.11, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Ant Port Figure 3-5. Electrical Characteristics Jun.11, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Tx to Ant (Wide span) Ant to Rx (Wide span) Figure 3-6. Electrical Characteristics Jun.11, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 13 Duplexer DATE Part Number D5DA782M0K2J6 Version 2.1igC Jun.11, 2015 Final Ordering Code Ordering Code Packing Reel size Status D5DA782M0K2J6-Z Tape & Reel 3,000 pcs. MP D5DA782M0K2J6-ZA Tape & Reel less than 3,000 pcs. MP D5DA782M0K2J6-Y Tape & Reel 15,000 pcs. MP D5DA782M0K2J6-YA Tape & Reel less than 15,000 pcs. MP D5DA782M0K2J6-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact Taiyo Yuden in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.