LLE205000 - Silicon Storage Technology (SST)

LLE Series

DESCRIPTION

The enhanced series of liquid level sensors incorporates a

photo-transistor trigger which provides a digital output that

denotes the presence or absence of liquid.

The mode of operation is derived from the principle of total

internal reflection. An LED and photo-transistor are housed

within a plastic dome at the head of the device. When no

liquid is present, light from the LED is internally reflected from

the dome to the photo-transistor. When liquid covers the

dome, the effective refractive index at the dome-liquid

boundary changes, allowing some light from the LED to

escape. Thus the amount of light received by the photo-

transistor is reduced and the output switches, indicating the

presence of liquid. This method of liquid level sensing is very

fast, and almost instantaneous for water.

FEATURES

• Solid state technology

• Small size

• Digital output

• Pre-wired

• Electrically robust

TYPICAL APPLICATIONS

• Home appliances

• Spa baths

• Vending machines

• Food and beverage

• Medical

• Compressors

• Machine tools

• Automotive

Liquid level sensors

BENEFITS

• Accurate, repeatable switching point

• Can be mounted in applications where space is limited

• Microprocessor compatible

• Easy to install, saving assembly time

• Reverse polarity, over voltage, short circuit and transient

protection

ORDER GUIDE

Catalogue Listing

Description Standard temperature High temperature

(Type 1) LLE101000 LLE101101

Screw In, M12 Thread, Plastic (Type 2) LLE102000 LLE102101

(Type 3) LLE103000 LLE103101

Push In, Plastic (Type 5) LLE105000 LLE105100

Screw In, ½ in, Metal Nickel plated brass LLE205000 LLE205100

Stainless steel LLE305000 LLE305100

LLE Series

2 www.honeywell.com/sensing

TECHNICAL INFORMATION

SpecificationsSpecifications

Specifications

Operation mode User defined single point on/off switch (Output is high in air)

Repeatability (mm) ± 1

Hysteresis (mm) 2 (dependent on liquid)

Response time Rising liquid level - 50 µs

Falling liquid level - 1 s max (in ethanol)

Response in other liquids dependent on viscosity

Mechanicalechanical

echanicalechanical

echanical

Mounting Type 1 and 2 - mounted from outside; Type 3 and 5 - mounted from inside

Termination 250 mm flying leads (180 mm for metal versions)

Blue 0 V

Red +5 V to +12 V supply

Green Output

Material [Note 1] Polysulphone

Dimensions PlasticPlastic

PlasticPlastic

Plastic MetalMetal

MetalMetal

Metal

LLE101/102/103 SeriesLLE101/102/103 Series

LLE101/102/103 Series LLE205/305 SeriesLLE205/305 Series

LLE205/305 SeriesLLE205/305 Series

LLE205/305 Series

Dome 3,5 mm radius (includes LLE105 Series)

Thread M12x1 ½ in BSPT

Hex 19 mm 24 mm (See mounting drawings on page 3)

EnvirEnvir

Environmentalonmental

onmentalonmental

onmental SS

Standartandar

tandartandar

tandard temperaturd temperatur

d temperaturd temperatur

d temperaturee

eHigh temperaturHigh temperatur

High temperaturHigh temperatur

High temperaturee

Operating temperature (°C) -25 to 80 (-13 °F to 176 °F) -40 to 125 (-40 °F to 257 °F)

Storage temperature (°C) -30 to 85 (-22 °F to 185 °F) -40 to 125 (-40 °F to 257 °F)

Thermal testing As per BS EN60068-2-33

Humidity As per BS EN60068-2-30

Vibration As per BS EN60068-2-6 Part S3: 1996

Mechanical shock As per BS EN60068-2-27 Part 2 Ea: 1987

Pressure range (bar) 0 to 5 (plastic housing) [Note 2]

0 to 25 (metal housing)

Ambient IR light limit (@ 940 nm) [Note 3] 10 mW/cm2 in operation

ElectricalElectrical

Electrical SS

Standartandar

tandartandar

tandard temperaturd temperatur

d temperaturd temperatur

d temperaturee

eHigh temperaturHigh temperatur

High temperaturHigh temperatur

High temperaturee

Supply voltage (Vcc) +5 Vdc to +12 Vdc ± 5 %

Supply current (mA) 15 mA nominal @ +5 Vdc 5 mA nominal @ +5 Vdc

Output sink current [Note 4] @ 25 °C 10 mA max. @ 25 °C 40 mA max.

@ 5 Vdc supply @ 80 °C 3 mA max. @ 125 °C 7 mA max.

Notes:Notes:

Notes:

[Note 1] Material compatibility information available on request.

[Note 2] Threaded sensors only.

[Note 3] For other ambient light environments the user should test the sensor under application conditions to verify compatibility.

[Note 4] The output is intended as a TTL compatible output signal, for interfacing to logic systems. For interfacing with other types of circuitry an appropriate buffer circuit

must be used.

Liquid level sensors

Honeywell Sensing and Control 3

MOUNTING DRAWING (IN MM AND INCHES)

19,00

(0.75)

22,49

(0.89)

19,40

(0.76)

12,45

(0.49)

4,70

(0.19)

M12 x 1 - 8 g

0,22 mm

Tinned Ends

(0.01 in )

Ø10,00

+0,10

-0

4,1

(0.16)

13,0

(0.51)

2,3

(0.09)

16,12

(0.63)

0,22 mm

Tinned Ends

(0.01 in )

+0.004

-0

(0.39 )

Vcc

RED

OUTPUT

GREEN

SCHMITT

TRIGGER

PHOTO

TRANSISTOR

0 V

BLUE

IRED

VOLTAGE

REGULATOR

ELECTRICAL DIAGRAM

Notes

1 Recommended panel hole size Ø 12,5

±0.3 mm (0.49 ±0.01 in)

2 ‘O’ ring seal supplied Unassembled

LLE102000/LLE102101

(Type 2)

LLE105000/LLE105100

(Type 5)

19,00

(0.75)

M12 x 1 - 8 g

"L"

12,40

(0.49)

10,25

(0.40)

4,70

(0.19)

0,22 mm

(0.01 in

)

Tinned Ends

19,00

(0.75)

0,22 mm

(0.01 in

Tinned Ends

"L"

7,20

(0.28)

10,30

(0.41)

2,70

(0.11)

M12 x 1 - 8 g

LLE101000/LLE101101

(Type 1)

LLE103000/LLE103101

(Type 3)

Cable length 12,3

(0.49)

16,00

(0.63)

24,00

(0.94)

24,00

(0.94)

45,4

(1.79)

16,5

(0.65)

Thread 1/2" BSP

Ø 14,5

0.57

0,22 mm2 (0.01 in2)

Tinned Ends

LLE205000/LLE205100

LLE305000/LLE305100

Automation and Control Solutions

Sensing and Control

Honeywell

Newhouse Industrial Estate

Motherwell, ML1 5SB, UK

www.honeywell.com

100437-EN UK07 GLO

Issue 3 June 2005

SALES AND SERVICE

Honeywell serves its customers through

a worldwide network of sales offices,

representatives and distributors. For

application assistance, current

specifications, pricing or name of the

nearest Authorized Distributor, contact

your local sales office or:

E-mail: E-mail:

E-mail: info.sc@honeywell.com

InterInter

Internet:net:

net:net:

net: www.honeywell.com/sensing

Phone and Fax:Phone and Fax:

Phone and Fax:

Asia Pacific +65 6355-2828

+65 6445-3033 Fax

Europe +44 (0) 1698 481481

+44 (0) 1698 481676 Fax

Latin America +1-305-805-8188

+1-305-883-8257 Fax

USA/Canada +1-800-537-6945

+1-815-235-6847

+1-815-235-6545 Fax

WARRANTY/REMEDY

Honeywell warrants goods of its

manufacture as being free of defective

materials and faulty workmanship.

Honeywell’s standard product warranty

applies unless agreed to otherwise by

Honeywell in writing; please refer to

your order acknowledgement or consult

your local sales office for specific

warranty details. If warranted goods are

returned to Honeywell during the period

of coverage, Honeywell will repair or

replace, at its option, without charge

those items it finds defective. TheThe

TheThe

The

forfor

foregoing is buyeregoing is buyer

egoing is buyeregoing is buyer

egoing is buyer’’

’’

’s sole rs sole r

s sole rs sole r

s sole remedy andemedy and

emedy andemedy and

emedy and

is in lieu of all waris in lieu of all war

is in lieu of all warranties, exprranties, expr

ranties, exprranties, expr

ranties, expressedessed

essedessed

essed

or implied, including those ofor implied, including those of

or implied, including those of

mermer

merchantability and fitness for achantability and fitness for a

chantability and fitness for achantability and fitness for a

chantability and fitness for a

parpar

particular purpose. In no event shallticular purpose. In no event shall

ticular purpose. In no event shallticular purpose. In no event shall

ticular purpose. In no event shall

Honeywell be liable forHoneywell be liable for

Honeywell be liable for

consequential, special, or indirconsequential, special, or indir

consequential, special, or indirectect

ectect

ect

damages.damages.

damages.

While we provide application

assistance personally, through our

literature and the Honeywell web site, it

is up to the customer to determine the

suitability of the product in the

application.

Specifications may change without

notice. The information we supply is

believed to be accurate and reliable as

of this printing. However, we assume no

responsibility for its use.

WARNING

PERSONAL INJURY

DO NOT USE these products as safety

or emergency stop devices or in any

other application where failure of the

product could result in personal injury.

Failure to comply with these

instructions could result in death or

serious injury.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this

product sheet is for reference only.

Do not use this document as a

product installation guide.

• Complete installation, operation, and

maintenance information is provided

in the instructions supplied with each

product.

Failure to comply with these

instructions could result in death or

serious injury.