https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page1/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Component terminal block, with integrated diode 1N5408, nom. voltage:800 V, nominal current:1.5 A,
connection method: Push-in connection, cross section:0.2 mm²-6 mm², AWG:24-10, length:56 mm, width:6.2
mm, color:gray, mounting: NS 35/7,5, NS 35/15, nom. voltage:800 V
Your advantages
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring
of conductors with ferrules or solid conductors
The compact design and front connection enable wiring in a confined space
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 50 pc
GTIN
GTIN 4046356509190
Weight per Piece (excluding packing) 10.000 g
Custom tariff number 85369010
Country of origin Poland
Technical data
General
Note The max. current is determined by the diode. Installed: diode 1N 5408,
reverse voltage: 1000 V, maximum continuous current: 1.5 A
Number of levels 1
Number of connections 2
Potentials 1
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page2/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Technical data
General
Nominal cross section 4 mm²
Color gray
Insulating material PA
Flammability rating according to UL 94 V0
Maximum load current the maximum current is determined by the diode
Rated surge voltage 8 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 1.02 W
Maximum load current 1.5 A (the maximum current is determined by the diode)
Nominal current IN1.5 A
Nominal voltage UN800 V
Open side panel Yes
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of surge voltage test Test passed
Surge voltage test setpoint 9.8 kV
Result of power-frequency withstand voltage test Test passed
Power frequency withstand voltage setpoint 2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection) Test passed
Result of bending test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
4 mm² / 0.9 kg
6 mm2 / 1.4 kg
Tensile test result Test passed
Conductor cross section tensile test 0.2 mm²
Tractive force setpoint 10 N
Conductor cross section tensile test 4 mm²
Tractive force setpoint 60 N
Conductor cross section tensile test 6 mm²
Tractive force setpoint 80 N
Result of tight fit on support Test passed
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page3/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Technical data
General
Tight fit on carrier NS 35
Setpoint 1 N
Result of voltage-drop test Test passed
Result of temperature-rise test Test passed
Short circuit stability result Test passed
Conductor cross section short circuit testing 4 mm²
Short-time current 0.48 kA
Conductor cross section short circuit testing 6 mm²
Short-time current 0.72 kA
Result of thermal test Test passed
Ageing test for screwless modular terminal block temperature cycles 192
Proof of thermal characteristics (needle flame) effective duration 30 s
Result of aging test Test passed
Oscillation, broadband noise test result Test passed
Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum Service life test category 1, class B, body mounted
Test frequency f1 = 5 Hz to f2 = 150 Hz
ASD level 1.857 (m/s2)2/Hz
Acceleration 0,8 g
Test duration per axis 5 h
Test directions X-, Y- and Z-axis
Shock test result Test passed
Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
Shock form Half-sine
Acceleration 5 g
Shock duration 30 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
Behavior in fire for rail vehicles (DIN 5510-2) Test passed
Flame test method (DIN EN 60695-11-10) V0
Oxygen index (DIN EN ISO 4589-2) >32 %
NF F16-101, NF F10-102 Class I 2
NF F16-101, NF F10-102 Class F 2
Surface flammability NFPA 130 (ASTM E 162) passed
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page4/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Technical data
General
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Dimensions
Width 6.2 mm
End cover width 2.2 mm
Length 56 mm
Height NS 35/7,5 36.5 mm
Height NS 35/15 44 mm
Connection data
Connection method Push-in connection
Stripping length 10 mm ... 12 mm
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 10
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Min. AWG conductor cross section, flexible 24
Max. AWG conductor cross section, flexible 12
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min. 0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max. 1 mm²
Internal cylindrical gage A4
Standards and Regulations
Connection in acc. with standard CSA
Flammability rating according to UL 94 V0
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page5/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Technical data
Standards and Regulations
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Environmental Product Compliance
Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0 27141121
eCl@ss 4.1 27141121
eCl@ss 5.0 27141120
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141127
eCl@ss 8.0 27141127
eCl@ss 9.0 27141127
ETIM
ETIM 2.0 EC000897
ETIM 3.0 EC000897
ETIM 4.0 EC000903
ETIM 5.0 EC000903
ETIM 6.0 EC000903
ETIM 7.0 EC000903
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page6/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Classifications
UNSPSC
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
Approvals
DNV GL / CSA / BV / LR / NK / UL Recognized / cUL Recognized / EAC / EAC / EAC / cULus Recognized
Ex Approvals
Approval details
DNV GL http://exchange.dnv.com/tari/ TAE000010T
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
B C
Nominal voltage UN 600 V 600 V
Nominal current IN 1.5 A 1.5 A
mm²/AWG/kcmil 24-10 24-10
BV http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials 39980/A0 BV
LR http://www.lr.org/en 12/20038 (E3)
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page7/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Approvals
NK http://www.classnk.or.jp/hp/en/ 14ME0912
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C
Nominal voltage UN 600 V 600 V
Nominal current IN 1.5 A 1.5 A
mm²/AWG/kcmil 24-10 24-10
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C
Nominal voltage UN 600 V 600 V
Nominal current IN 1.5 A 1.5 A
mm²/AWG/kcmil 24-10 24-10
EAC EAC-Zulassung
EAC RU C-
DE.A*30.B.01742
EAC RU C-
DE.AI30.B.01102
cULus Recognized
Accessories
Accessories
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page8/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
DIN rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page9/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page10/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page11/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
Documentation
Mounting material-PT-IL-3208090
Operating decal for the push-in Technology
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page12/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover-D-ST 4-3030420
End cover, length: 55.9 mm, width: 2.2 mm, height: 29 mm, color: gray
Insulating sleeve
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page13/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, color: white
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, color: red
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, color: blue
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, color: yellow
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, color: green
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page14/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, color: gray
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, color: black
Insulating sleeve-ISH 4/0,5-3002885
Insulating sleeve, color: gray
Insulating sleeve-ISH 4/1,0-3002898
Insulating sleeve, color: black
Jumper
Plug-in bridge-FBS 2-6-3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page15/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Plug-in bridge-FBS 3-6-3030242
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
Plug-in bridge-FBS 4-6-3030255
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
Plug-in bridge-FBS 5-6-3030349
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
Plug-in bridge-FBS 6-6-1008238
Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red
Plug-in bridge-FBS 10-6-3030271
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page16/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Plug-in bridge-FBS 20-6-3030365
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
Plug-in bridge-FBSR 2-6-3033715
Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red
Plug-in bridge-FBSR 3-6-3001594
Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red
Plug-in bridge-FBSR 4-6-3001595
Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red
Plug-in bridge-FBSR 5-6-3001596
Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page17/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Plug-in bridge-FBSR 10-6-3033716
Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red
Plug-in bridge-FBS 2-6 BU-3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge-FBS 3-6 BU-3036945
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
Plug-in bridge-FBS 4-6 BU-3036958
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
Plug-in bridge-FBS 5-6 BU-3036961
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page18/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Plug-in bridge-FBS 10-6 BU-3032198
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge-FBS 20-6 BU-3032208
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
Plug-in bridge-FBS 50-6 BU-3032211
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Labeled terminal marker
Zack marker strip-ZB 6 CUS-0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page19/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm
Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm
Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm
Marker for terminal blocks-ZB 6,LGS:U-N-1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm
Marker for terminal blocks-UC-TM 6 CUS-0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page20/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Marker for terminal blocks-UCT-TM 6 CUS-0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Zack Marker strip, flat-ZBF 6 CUS-0825027
Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Marker for terminal blocks-UC-TMF 6 CUS-0824646
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm
Marker for terminal blocks-UCT-TMF 6 CUS-0829665
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm
Zack Marker strip, flat-ZBF 6,LGS:FORTL.ZAHLEN-0808749
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page21/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Zack Marker strip, flat-ZBF 6,QR:FORTL.ZAHLEN-0808765
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Zack Marker strip, flat-ZBF 6,LGS:GERADE ZAHLEN-0810834
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Zack Marker strip, flat-ZBF 6,LGS:UNGERADE ZAHLEN-0810876
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
Marker for terminal blocks-TMT 6 R CUS-0824488
Marker for terminal blocks, can be ordered: by line, white, labeled according to customer specifications, mounting type:
snap into universal marker groove, snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 6.35
x 6.15 mm
Marker carriers
Group marker label for terminal marking-GBS-ZB/26X6-0809298
Group marking label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled
with ESL 26x6 mm or EST 25x6 mm, in the foot part with Zack marker strip, length: 29 mm
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page22/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Marker carriers-CARRIER-TM 300-0828282
Marker carriers, gray, unlabeled, mounting type: snap into flat marker groove, lettering field size: 10.5 x 300 mm
Partition plate
Partition plate-ATP-ST 4-3030721
Partition plate, length: 59.8 mm, width: 2 mm, height: 39 mm, color: gray
Planning and marking software
Software-CLIP-PROJECT ADVANCED-5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software-CLIP-PROJECT PROFESSIONAL-5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and
labels for identifying terminal blocks, conductors and cables, and devices.
Reducing bridge
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page23/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Reducing bridge-RB ST (2,5/4)-1,5/S-3214356
Reducing bridge, pitch: 6.7 mm, length: 22.7 mm, width: 10.4 mm, number of positions: 2, color: red
Screwdriver tools
Screwdriver-SZF 1-0,6X3,5-1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-
component grip, with non-slip grip
Screwdriver-ST-BW-1207608
Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
Short-circuit connector
Short-circuit connector-FBSRH 2-6-3033812
Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red
Terminal marking
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page24/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Group marker label for terminal marking-GBS 5-25X12-0810588
Group marker label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeled with
a 25 x 12 mm label or manually with the B-STIFT, in the foot part with ZB 5
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Marker for terminal blocks-UC-TM 6-0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Marker for terminal blocks-UCT-TM 6-0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm
Zack Marker strip, flat-ZBF 6:UNBEDRUCKT-0808710
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page25/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Marker for terminal blocks-UC-TMF 6-0818140
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 5.1 mm
Marker for terminal blocks-UCT-TMF 6-0828746
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size:
5.4 x 4.7 mm
Marker for terminal blocks-TMT 6 R-0816498
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, perforated, mounting
type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.35 x 6.15 mm
Marker for terminal blocks-TMT (EX9,5)R-0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap
into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x
50000 mm
Marker for terminal blocks-US-TM 100-0829255
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into universal marker
groove, lettering field size: 104 x 9.8 mm
Test plug terminal block
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page26/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Test plugs-MPS-MT-0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs-PS-6-3030996
Test plugs, color: red
Test plugs-PS-6/2,3MM RD-3038736
Test plugs, color: red
Test socket
Test adapter-PAI-4-FIX-5/6 BU-3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 OG-3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page27/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Test adapter-PAI-4-FIX-5/6 YE-3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 RD-3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 GN-3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 BK-3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 GY-3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
https://www.phoenixcontact.com/us/products/3212125
04/30/2019Page28/28
Component terminal block-PT 4-DIO 1N 5408/R-L-3212125
Accessories
Test adapter-PAI-4-FIX-5/6 VT-3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 BN-3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter-PAI-4-FIX-5/6 WH-3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Warning label printed
Warning label-WS PT 4-1029563
Warning label, yellow/black, labeled: Lightning flash, mounting type: Plug in, for terminal block width: 6.2 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
