APT5010B2VR 47A 0.100 500V POWER MOS V (R) T-MAXTM Power MOS V(R) is a new generation of high voltage N-Channel enhancement mode power MOSFETs. This new technology minimizes the JFET effect, increases packing density and reduces the on-resistance. Power MOS V(R) also achieves faster switching speeds through optimized gate layout. * Faster Switching * 100% Avalanche Tested * Lower Leakage * New T-MAXTM Package D G (Clip-mounted TO-247 Package) S MAXIMUM RATINGS Symbol VDSS ID All Ratings: TC = 25C unless otherwise specified. Parameter APT5010B2VR UNIT 500 Volts Drain-Source Voltage 47 Continuous Drain Current @ TC = 25C 1 Amps IDM Pulsed Drain Current VGS Gate-Source Voltage Continuous 30 Gate-Source Voltage Transient 40 Total Power Dissipation @ TC = 25C 520 Watts Linear Derating Factor 4.16 W/C VGSM PD TJ,TSTG 188 -55 to 150 Operating and Storage Junction Temperature Range TL Lead Temperature: 0.063" from Case for 10 Sec. IAR Avalanche Current 1 47 1 Repetitive Avalanche Energy EAS Single Pulse Avalanche Energy C 300 (Repetitive and Non-Repetitive) EAR Volts Amps 50 4 mJ 2500 STATIC ELECTRICAL CHARACTERISTICS BVDSS ID(on) RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions MIN Drain-Source Breakdown Voltage (VGS = 0V, I D = 250A) 500 Volts 47 Amps On State Drain Current 2 (VDS > I D(on) x R DS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 TYP (VGS = 10V, 0.5 ID[Cont.]) MAX 0.100 Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V) 25 Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125C) Ohms A 250 Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) UNIT 100 nA 4 Volts 2 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. USA APT Website - http://www.advancedpower.com 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bat B4 Parc Cadera Nord 050-5611 Rev B Symbol DYNAMIC CHARACTERISTICS Symbol APT5010B2VR Characteristic Test Conditions MIN TYP MAX Ciss Input Capacitance VGS = 0V 7400 8900 Coss Output Capacitance VDS = 25V 1000 1400 Reverse Transfer Capacitance f = 1 MHz 380 570 Crss Qg Total Gate Charge Qgs 3 VGS = 10V 312 470 VDD = 0.5 VDSS 50 75 ID = ID[Cont.] @ 25C 127 190 Gate-Source Charge Qgd Gate-Drain ("Miller ") Charge td(on) Turn-on Delay Time tr VGS = 15V 14 30 VDD = 0.5 VDSS 16 32 ID = ID[Cont.] @ 25C 54 80 RG = 0.6 5 10 TYP MAX Rise Time td(off) Turn-off Delay Time tf Fall Time UNIT pF nC ns SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS ISM VSD Characteristic / Test Conditions MIN 47 Continuous Source Current (Body Diode) Pulsed Source Current 1 (Body Diode) 188 Diode Forward Voltage 2 (VGS = 0V, IS = -ID[Cont.]) 1.3 UNIT Amps Volts t rr Reverse Recovery Time (IS = -ID[Cont.], dl S/dt = 100A/s) 620 ns Q rr Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/s) 14.7 C THERMAL CHARACTERISTICS Symbol Characteristic MIN RJC Junction to Case RJA Junction to Ambient TYP MAX 0.24 40 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 Pulse Test: Pulse width < 380 S, Duty Cycle < 2% D=0.5 0.1 0.2 0.1 0.05 Note: PDM Z JC, THERMAL IMPEDANCE (C/W) 050-5611 Rev B 0.3 0.01 0.02 0.005 0.01 SINGLE PULSE t1 t2 Duty Factor D = t1/t2 Peak TJ = PDM x ZJC + TC 0.001 10-5 10-4 C/W 3 See MIL-STD-750 Method 3471 4 Starting T = +25C, L = 2.26mH, R = 25, Peak I = 47A j G L 5 These dimensions are equal to the TO-247AD without mounting hole APT Reserves the right to change, without notice, the specifications and information contained herein. 0.05 UNIT 10-3 10-2 10-1 1.0 10 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION APT5010B2VR VGS=7V, 8V, 10V & 15V 100 80 5.5V 60 40 VGS=15V 6V 5V 20 4.5V ID, DRAIN CURRENT (AMPERES) TJ = +25C 80 TJ = +125C VDS> ID (ON) x RDS (ON)MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE 60 40 TJ = +125C 20 TJ = +25C TJ = -55C 0 0 2 4 6 8 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TYPICAL TRANSFER CHARACTERISTICS BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED) ID, DRAIN CURRENT (AMPERES) 50 40 30 20 10 0 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE 25 40 5V 20 4.5V 1.5 V GS NORMALIZED TO = 10V @ 0.5 I [Cont.] D 1.4 1.3 1.2 VGS=10V 1.1 VGS=20V 1.0 0.9 0 20 40 60 80 100 120 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT 1.15 1.10 1.05 1.00 0.95 0.90 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE -50 1.2 2.5 I = 0.5 I [Cont.] D D V GS = 10V 2.0 1.5 1.0 0.5 0.0 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, ON-RESISTANCE vs. TEMPERATURE VGS(TH), THRESHOLD VOLTAGE (NORMALIZED) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED) 5.5V 60 0 RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE ID, DRAIN CURRENT (AMPERES) TJ = -55C VGS=7V, 8V & 10V 4V 0 2 4 6 8 10 12 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, TYPICAL OUTPUT CHARACTERISTICS 4V 0 50 100 150 200 250 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 2, TYPICAL OUTPUT CHARACTERISTICS 0 100 6V 80 1.1 1.0 0.9 0.8 0.7 0.6 -50 -25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE 050-5611 Rev B ID, DRAIN CURRENT (AMPERES) 100 APT5010B2VR 200 OPERATION HERE LIMITED BY RDS (ON) 100 100S 50 1mS 10 5 10mS 1 100mS DC TC =+25C TJ =+150C SINGLE PULSE .5 .1 I = I [Cont.] D D VDS=100V 16 Coss Crss 1,000 500 .01 .1 1 10 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, TYPICAL CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE IDR, REVERSE DRAIN CURRENT (AMPERES) VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 20 5,000 100 1 5 10 50 100 500 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA VDS=250V 12 VDS=400V 8 4 0 Ciss 10,000 C, CAPACITANCE (pF) ID, DRAIN CURRENT (AMPERES) 30,000 10S 0 100 200 300 400 500 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE 200 100 TJ =+150C 50 TJ =+25C 10 5 1 0 0.4 0.8 1.2 1.6 2.0 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, TYPICAL SOURCE-DRAIN DIODE FORWARD VOLTAGE T-MAXTM Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 5 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) Drain 20.80 (.819) 21.46 (.845) 2.87 (.113) 3.12 (.123) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) Gate Drain Source 1.01 (.040) 1.40 (.055) 050-5611 Rev B 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058