SML-P11MTT86 - ROHM Electronics

SML-P11DT

Orange

SML-P11UT SML-P11VT

RedYellow

SML-P11YT

Green(Yellowish Green)

SML-P11MT

AlGaInP on GaAs

Directivity (Typ.)

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

20 100 5 -40 to +85 -40 to +100

:Duty 1/10, 1kHz.

Absolute Maximum Ratings (Ta=25°C)

Electrical Optical Characteristics (Ta=25°C)

Dimensions (Unit:mm)

Tolerance:±0.1

(Unit:mm)

The recommended thickness of the screen mask

for soldering is between 80 and 130µm. The

hole size of the screen mask should be same as

the recommended land pattern or smaller.

Recommended Pad Layout

SML-P11 Series

Yellow

Orange

Red

Emitting Color

Material

Package Size(mm)

Part No.

Peak

forward

current

IFP

(mA)

Part No.

Power

dissipation

(mW)

Forward

current

(mA)

Reverse

voltage

(V)

Operating

temperature

Topr

( C)

Storage

temperature

Tstg

( C)

Emitting

color

0402<1.0 0.6 t=0.2mm>

Low Current Type

Green

(Yellowish Green)

Packaging Specifications (Unit:mm)

Tape Specifications:T86 <10,000pcs/reel>

Feeding direction

Reel Specifications

φ13

φ60

φ180

11.4±1

Tolerance:±0.2 Tolerance:±0.2

−3

1 100 4

0.63

2.5

1.6

1.0

2.1

7.6

7.3

5.5

3.6

569

586

605

621

626

1.9

1.8

Transparent

Colorless

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

Part No.

Forward

voltage

Light wavelength

Reverse

current

Brightness

(mA)

Typ.

(V)

Typ.

(mcd)

Typ.

(nm)

λD

Min.

(mcd)

(mA)

Max.

(µA)

Resin Color

(V)

Dominant

0.6

0.50.5 0.4

2±0.05

φ1.5

1.75±0.1

0 to 0.5

0.68

3.5±0.1

5.5

1.10

+0.1

4±0.1

Label Position

PICOLEDTM - ECO

1006(0402) 1.0×0.6(t=0.2)

0.28±0.1

RELATIVE LUMINOUS INTENSITY (%)

Angular Displacement (deg)

RELATIVE LUMINOUS INTENSITY (%)

X - Y

0 50 10050100

0°

30°

60°

90°

30°

60°

90°

X' - Y'

0 50 10050100

0°

30°

60°

90°

30°

60°

90°

FORWARD VOLTAGE : VF

(V)

FORWARD CURRENT : IF

(mA)

0-10 10 20-20 30-30 40-40 50 70 8060 90

AMBIENT TEMPERATURE : Ta

(°C)

MAXIMUM FORWARD CURRENT : IF

Max. (mA)

RELATIVE LUMINOUS INTENSITY

CASE TEMPERATURE : Tc

(°C)

RATIO of MAXIMUM TOLERABLE PEAK CURRENT

to MAXIMUM TOLERABLE DC CURRENT

peak

Max.

PULSE DURATION : Tw

(µs)

1.4

1.2

1.0

0.8

0.6

0.4

40-20-40 -30 -10 20010 30 50

60 70 80 90 100

1.6

IF=20mA

10kHz

2kHz

1kHz

200Hz

100Hz

10 100 1000 10000

SML-P11YT

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

SML-P11YT

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

SML-P11YT

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

SML-P11YT

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

SML-P11YT

SML-P11MT

SML-P11YT

SML-P11DT

SML-P11UT

SML-P11VT

0.1

1.0

10.0

100.0

1.5 2.0 2.5

Ta=25°C

Electrical Characteristic Curves

Forward Current - Forward Voltage

Derating

Relative Luminous Intensity - Forward Current

Relative Luminous Intensity - Case Temperature

Ratio of Maximum Tolerable Peak Current - Pulse Duration

RELATIVE LUMINOUS INTENSITY

FORWARD CURRENT : IF

(mA)

100

120

0 5 10 15 20

Ta=25°C

Notes

No technical content pages of this document may be reproduced in any form or transmitted by any

means without prior permission of ROHM CO.,LTD.

The contents described herein are subject to change without notice. The specifications for the

product described in this document are for reference only. Upon actual use, therefore, please request

that specifications to be separately delivered.

Application circuit diagrams and circuit constants contained herein are shown as examples of standard

use and operation. Please pay careful attention to the peripheral conditions when designing circuits

and deciding upon circuit constants in the set.

Any data, including, but not limited to application circuit diagrams information, described herein

are intended only as illustrations of such devices and not as the specifications for such devices. ROHM

CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any

third party's intellectual property rights or other proprietary rights, and further, assumes no liability of

whatsoever nature in the event of any such infringement, or arising from or connected with or related

to the use of such devices.

Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or

otherwise dispose of the same, no express or implied right or license to practice or commercially

exploit any intellectual property rights or other proprietary rights owned or controlled by

ROHM CO., LTD. is granted to any such buyer.

Products listed in this document are no antiradiation design.

Appendix1-Rev2.0

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact your nearest sales office.

ROHM Customer Support System THE AMERICAS / EUPOPE / ASIA / JAPAN

www.rohm.com

The products listed in this document are designed to be used with ordinary electronic equipment or devices

(such as audio visual equipment, office-automation equipment, communications devices, electrical

appliances and electronic toys).

Should you intend to use these products with equipment or devices which require an extremely high level

of reliability and the malfunction of which would directly endanger human life (such as medical

instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers

and other safety devices), please be sure to consult with our sales representative in advance.

It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance

of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow

for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in

order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM

cannot be held responsible for any damages arising from the use of the products under conditions out of the

range of the specifications or due to non-compliance with the NOTES specified in this catalog.

21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121

FAX : +81-75-315-0172

Appendix