Sensors
commercial
Switches
Pressure
Mass airflow
Force
Humidity
Temperature
Position
Infrared
Current
Liquid level
Basic switches
and
Product solutions on the Interactive Catalogue
September 2002
2www.honeywell.com/sensing
INTRODUCTION
COMMERCIAL SWITCHES AND SENSORS
Honeywell’s Commercial Switches and Sensors offer a wide selection of products and technology capability for applications in medical devices and equipment;
heating, ventilation, air-conditioning and refrigeration; information technology; home appliances; motor control and automotive passenger cars. This catalogue
contains a selection of our most popular, established product listings – all tried and tested in field applications. To view our complete range of products, visit our
website at
www.honeywell.com/sensing.
System critical sensing solutions
A system is critical if the quality, reliability, delivery and customer service
associated with a component part is essential to the performance of the
operation or end product. If a sensor or switch is critical to the performance,
cost effectiveness, delivery or safety of a product or operation, then it is
system critical. It is therefore a defining element in the performance of the
system under whatever conditions apply. Failure of the component – or failure
of delivery of the component – results in lost productivity, increased costs or a
catastrophic event such as a shutdown. Therefore selecting the right product
is essential. It can make the difference between success and failure.
Honeywell – delivering excellence
To deliver the right products for our customers’ applications we listen to them
to understand their needs. Using techniques such as “Voice of the Customer”
and “Concept Engineering” we make sure that the products and solutions we
deliver are the right ones. As part of Honeywell we can use local knowledge
and understanding combined with global expertise and resources to achieve
this. We can deploy many key technologies to bring innovative solutions to
customers’ problems.
Our products are manufactured to work well and to last. We use Six Sigma
Plus productivity to ensure this is the case. We have award winning
manufacturing facilities around the world and recognised world class
business excellence in manufacturing and supply chain management to
deliver on time, anywhere in the world.
Our e-business approach offers instant access to product information,
technical support and application knowledge through our Internet site. Check
out our powerful new interactive catalogue that can search and find the right
products for customers’ needs and deliver a drawing ready for incorporation
in a CAD system direct to your desk.
And of course, we manage our whole business for the benefit of our
customers, using an acknowledged world-class business excellence approach
that incorporates Six Sigma principles.
How to use this catalogue
For each referenced listing, key specification parameters, descriptions and
mounting drawing information are presented. These listings illustrate our
capabilities while the specifications included allow easy differentiation between
similar products.
There are, of course, many more product options available. Full product
specification information may be accessed on our website
(
www.honeywell.com/sensing
). At the Home page enter the catalogue listing
reference in the SEARCH box and click GO! This will take you directly to the
interactive catalogue/specification search tables for this listing. Alternatively,
select and click the interactive catalogue icon on the Home page and then
choose a product category against which to do a specification search.
Also on the website you can access installation instructions, application notes,
Frequently Asked Questions (FAQs), selection guides and additional technical
information.
Mounting dimensions
Mounting dimensions shown in each product section are for reference only.
For exacting layout work, request an engineering drawing from your nearest
Honeywell sales office. Where dual dimensions are shown on mounting
drawings, the first or upper one is millimetres (mm) and the second or lower
is inches (in). Where single dimensions are shown, they are millimetres
(mm), unless otherwise stated.
To order these products
Simply contact your local Honeywell Distributor or your local Honeywell office.
More information on Honeywell products and how to contact us can be found
at
http://locator.micro.honeywell.com/
3
www.honeywell.com/sensing
INDEX
CONTENTS
Pressure Sensors
Page 4
Absolute, differential, gauge, and vacuum gauge pressure sensors for media
that are compatible with a silicon diaphragm. These sensors are ideal for low-
cost commercial grade applications, such as printed circuit boards. Small and
reliable, they offer excellent repeatability and high accuracy under varying
environmental conditions.
Mass Airflow Sensors
Page 10
Amplified and unamplified microbridge mass airflow sensors provide a
sensitive and fast response and high accuracy over a broad range of gas and
air flows.
Force Sensors
Page 12
Compact, extremely sensitive devices for precise, reliable performance in any
application that requires precision force measurement.
Humidity Sensors
Page 13
Relative humidity sensors with on-chip signal conditioning. Chemically
resistant packaging to accommodate harsh environments. Sensor
construction consists of a planar capacitor with a second polymer layer to
protect against dirt, dust, oils and other hazards.
Temperature Sensors
Page 14
Platinum and silicon-based thin film resistance temperature devices (RTDs)
for applications that require small package size, accuracy and linear outputs.
Position Sensors
Page 16
Hall effect and magnetoresistive sensors for all applications that require
accurate, reliable outputs.
Infrared Products
Page 20
Optoelectronic standard infrared emitting diodes (IREDs), sensors and
assemblies for object presence, limit and motion sensing, position encoding
and movement encoding.
Current Sensors
Page 26
Adjustable linear null balance, digital and linear output current sensors for
monitoring ac or dc current.
Liquid Level Sensors
Page 30
Sensitive sensors in a variety of housing types for detecting the presence or
absence of a wide range of liquids.
Basic Switches
Page 31
Standard, miniature and subminiature switches, available in a range of
enclosures and with a variety of actuators. They are ideal for use alone or
built into assemblies.
!
WARNING
MISUSE OF DOCUMENTATION
•The information presented in this product sheet (or
catalogue) is for reference only. DO NOT USE this
document as product installation information.
•Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
!
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices, or in any other application where failure of the
product could result in personal injury
Failure to comply with these instructions could result in
death or serious injury.
4www.honeywell.com/sensing
Flow Through
Type 6
24PC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Flow Through/Vacuum Gauge 15.0 psi 24PCCFG6G
Flow Through/Vacuum Gauge 30.0 psi 24PCDFG6G
26PC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Flow Through/Vacuum Gauge 1.0 psi 26PCAFG6G
Flow Through 15.0 psi 26PCCFG6G
Gauge/Vacuum Gauge 100 psi 26PCFFG6G
Honeywell pressure sensors are small, low cost and reliable. They feature excellent repeatability, high
accuracy, and reliability under varying environmental conditions. In addition, they feature highly
consistent operating characteristics from one sensor to the next and interchangeability without
recalibration.
We offer three pressure sensor measurement types—absolute, differential and gauge—including vacuum
gauge and bidirectional types. A wide variety of pressure ranges, along with both amplified and
unamplified versions, are available.
Honeywell pressure sensors are best used in applications which require precision pressure measurement.
24PC/26PC Series
Signal conditioning: Unamplified
noncompensated- (24PC Series)
compensated - (26 PC Series)
Supply voltage: 10 Vdc typ.
12 Vdc max. (24PC Series)
16 Vdc max. (26PC Series)
Operating temperature: -40 °C to 85 °C
-40 °F to 185 °F
Port style: Straight or Flow Through
Termination: PCB; 1 x 4; 0.600 in (Type 6)
PCB; 2 x 2; (Type 2)
1 x 4 with connector (Type 5)
OPTIONS
Differential
MOUNTING DIMENSIONS (for reference only) mm/in
DIFFERENTIAL SENSOR
1 X 4 Termination (Style 6) Port Style A, Straight (Only)
Gauge
MOUNTING DIMENSIONS (for reference only)
mm/in
GAUGE SENSOR
1 x 4 Termination (Style 6) Port Style A, Straight
Pin 1 is notched, Pin 2 is next to Pin 1, etc.
24PC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Gauge/Vacuum Gauge 1.0 psi 24PCAFA6G
Differential/Vacuum Gauge 5.0 psi 24PCBFA6D
Gauge/Vacuum Gauge 5.0 psi 24PCBFA6G
Differential/Vacuum Gauge 15.0 psi 24PCCFA6D
Gauge/Vacuum Gauge 15.0 psi 24PCCFA6G
Differential/Vacuum Gauge 30.0 psi 24PCDFA6D
Gauge/Vacuum Gauge 30.0 psi 24PCDFA6G
Differential 0.5 psi 24PCEFA6D
Gauge 0.5 psi 24PCEFA6G
Differential 100 psi 24PCFFA6D
Gauge 100 psi 24PCFFA6G
26PC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential/Vacuum Gauge 1.0 psi 26PCAFA6D
Gauge/Vacuum Gauge 1.0 psi 26PCAFA6G
Differential 5.0 psi 26PCBFA6D
Gauge 5.0 psi 26PCBFA6G
Differential/Vacuum Gauge 15.0 psi 26PCCFA6D
Gauge/Vacuum Gauge 15.0 psi 26PCCFA6G
Differential 30.0 psi 26PCDFA6D
Gauge 30.0 psi 26PCDFA6G
Gauge 100 psi 26PCFFA6G
Differential 250 psi 26PCGFA6D
PRESSURE
Pressure Sensors
5
www.honeywell.com/sensing
CPC/CPX Series
Low Pressure
Signal conditioning: Unamplified
compensated - (CPC Series)
noncompensated - (CPX Series)
Supply voltage: 12 Vdc typ.
16 Vdc max.
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Barbed
Termination: PCB
Accuracy grade: Commercial (1.0 %)
OPTIONS
CPC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential (1.0 psi) 4.0 in H2O CPCL04DFC
Gauge (1.0 psi) 4.0 in H2O CPCL04GFC
Differential (1.0 psi) 10.0 in H2O CPCL10DFC
CPX Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential 4.0 in H2O CPXL04DF
Differential 10.0 in H2O CPCL10DF
PRESSURE
24PC/26PC Series
(Continued)
Type 2
26PC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Flow Through 30.0 psi 26PCDFG2G
Type 5
26PC Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Flow Through/Vacuum Gauge 100 psi 26PCFFU5G
24PC/26PC SMT
(Surface Mount Technology)
Signal conditioning: Unamplified
noncompensated- (24PC SMT Series)
compensated - (26 PC SMT Series)
Supply voltage: 10 Vdc typ.
12 Vdc max. (24PC SMT Series)
16 Vdc max. (26PC SMT Series)
Operating temperature: -40 °C to 85 °C
-40 °F to 185 °F
Port style: Straight, 1,88 mm Ø (0.74 in)
Termination: SMT solder
Measurement type: Gauge, Vacuum Gauge,
Differential, Wet/Wet Differential
OPTIONS
24PC SMT Series
PRESSURE RANGE REFERENCE
0 psi to 1.0 psi 24PC01SMT
0 psi to 5.0 psi 24PC05SMT
0 psi to 15.0 psi 24PC15SMT
26PC SMT Series
PRESSURE RANGE REFERENCE
0 psi to 1.0 psi 26PC01SMT
0 psi to 5.0 psi 26PC05SMT
0 psi to 15.0 psi 26PC15SMT
6www.honeywell.com/sensing
DC Series, Low Pressure
Signal conditioning: Amplified compensated
unregulated (DC001NDC4)
regulated (DC005NDR4)
Supply voltage: 5 Vdc typ., 5.1 Vdc max. (DC001NDC4)
7 Vdc to 35 Vdc (DC005NDR4)
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Barbed
Termination: PCB
OPTIONS
DC001NDC4
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential 1.0 in H2O DC001NDC4
DC005NDR4
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential 5.0 in H2O DC005NDR4
DCXL/DUXL Series, Low Pressure
Signal conditioning: Unamplified
compensated (DCXL)
noncompensated (DUXL)
Supply voltage: 12 Vdc typ., 16 Vdc max. (DCXL)
4.5 Vdc min., 8 Vdc max. (DUXL)
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Barbed
Termination: PCB
OPTIONS
DCXL Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential 1.0 in H2O DCXL01DN
Differential 10.0 in H2O DCXL10DN
DUXL Series
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Differential 1.0 in H2O DUXL01D
Differential 10.0 in H2O DUXL10D
PRESSURE
7
www.honeywell.com/sensing
XCA Series
Signal conditioning: Unamplified compensated
Supply voltage: 5 Vdc typ., 16 Vdc max.
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Barbed
Termination: PCB
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Absolute 15.0 psia XCA415AN
XCX Series
Signal conditioning: Unamplified compensated
Supply voltage: 12 Vdc typ., 16 Vdc max.
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Barbed
Termination: PCB
Accuracy grade: Commercial (1.0 %)
MEASUREMENT PRESSURE ACCURACY REFERENCE
TYPE RANGE GRADE
Differential 1.0 psi XCX01DNC
Differential 1.0 psi High (0.50 %) XCX01DNH
Differential 15.0 psi XCX15DNC
XPC Series
Signal conditioning: Unamplified compensated
Supply voltage: 12 Vdc typ., 16 Vdc max.
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Barbed
Termination: PCB
Accuracy grade: Commercial (1.0 %)
MEASUREMENT PRESSURE PORT REFERENCE
TYPE RANGE STYLE
Differential 1.0 psi Axial XPC01DFC
Differential 15.0 psi Radial XPC15DTC
PRESSURE
8www.honeywell.com/sensing
40PC Series, Miniature Signal Conditioned
Signal conditioning: Amplified
Supply voltage: 5 Vdc ± 0.25 Vdc
Operating temperature: -45 °C to 125 °C
-49 °F to 257 °F
Port style: Straight for O-ring interface
Termination: PCB, unformed
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Bi-Directional Gauge/Vacuum Gauge ± 50 mm Hg 40PC001B1A
Gauge 0 to 300 mm HG 40PC006G1A
Vacuum 0 to -15.0 psi 40PC015V1A
Gauge 15.0 psi 40PC015G1A
Gauge 30.0 psi 40PC030G1A
Gauge 100 psi 40PC100G1A
Gauge 150 psi 40PC150G1A
Gauge 250 psi 40PC250G1A
Gauge 500 psi 40PC500G1A
PRESSURE
XSX Series, Low pressure
Signal conditioning: Unamplified
uncompensated
Supply voltage: 12 Vdc typ., 16 Vdc max.
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Port style: Button
Termination: PCB
Accuracy grade: Commercial (1.0 %)
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Gauge 4.0 in H2O XSXL04GF
9
www.honeywell.com/sensing
140PC Series
Signal conditioning: Amplified
Supply voltage: 8 Vdc typ., 16 Vdc max.
Operating temperature: -40 °C to 85 °C
-40 °F to 185 °F
Port style: Straight
Termination: PCB
Note: Dimensions shown apply to Differential and Absolute versions. Gauge
units are identical, except the P1 port is absent.
MEASUREMENT PRESSURE TERMINATION REFERENCE
TYPE RANGE
Gauge/Vacuum Gauge -15 psi 141PC15G
Differential/Vacuum Gauge 1.0 psi 142PC01D
Gauge 1.0 psi 142PC01G
Gauge 2.0 psi 142PC02G
Differential/Vacuum Gauge 5.0 psi 142PC05D
Differential/Vacuum Gauge -39 in H2O to 55 in H2O 142PC05D97
Gauge 5.0 psi 142PC05G
Absolute 15 psia 142PC15A
Absolute 15 psia Leadwire 142PC15AW95
Gauge 15 psi 142PC15G
Differential/Vacuum Gauge ± 2.5 psi 143PC03D
Differential/Vacuum Gauge ± 5.0 psi Leadwire 143PC05DW
160PC Series, Low Pressure
Signal conditioning: Amplified
Supply voltage: 8 Vdc typ., 16 Vdc max.
Operating temperature: -40 °C to 85 °C
-40 °F to 185 °F
Port style: Straight
Termination: PCB
Note: Dimensions shown apply to Differential and Absolute versions. Gauge
units are identical, except the P1 port is absent.
MEASUREMENT PRESSURE SUPPLY REFERENCE
TYPE RANGE VOLTAGE
Differential/Vacuum Gauge 0 to 27.68 in H2O 162PC01D
Differential/Vacuum Gauge ± 5.0 in H2O 163PC01D36
Differential/Vacuum Gauge -20 cm to 120 cm H2O 163PC01D48
Differential/Vacuum Gauge -20 cm to 120 cm H2O 5 Vdc 163PC01D61
Differential/Vacuum Gauge ± 2,5 in H2O 163PC01D75
Differential/Vacuum Gauge 10.0 in H2O 164PC01D37
Differential/Vacuum Gauge 5,0 in H2O 164PC01D76
PRESSURE
10 www.honeywell.com/sensing
AWM3000 Series
Like the AWM2000 Series, the dual Wheatstone
bridges control airflow measurement. The
AWM3000 Series is amplified; therefore, it can be
used to increase the gain and to introduce voltage
offsets to the sensor output. The heater control
circuit and the sensing bridge supply circuit are on
board the package.
Signal conditioning: Am-
plified (1 Vdc to 5 Vdc)
Port style: Straight
FLOW/PRESSURE RANGE REFERENCE
± 200 sccm AWM3100V
+ 2.0 in H20 (5 mBar) AWM3200V
± 1000 sccm (1 SLPM) AWM3300V
AWM40000 Series
The microbridge mass airflow sensor operates on
the theory of heat transfer. Mass airflow is directed
across the surface of the sensing elements. Output
voltage varies in proportion to the mass air or
other gas flow through the inlet and outlet ports of
the package. The specially designed housing
precisely directs and controls the airflow across
the microstructure sensing element. Mechanical
design of the package allows it to be easily
mounted to printed circuit boards.
The microbridge mass airflow sensor has a unique
silicon chip based on advanced microstructure
technology. It consists of a thin-film, thermally
isolated bridge structure containing heater and
temperature sensing elements. The bridge
structure provides a sensitive and fast response to
the flow of air or other gas over the chip. Dual
sensing elements positioned on both sides of a
central heating element indicate flow direction as
well as flow rate. Laser trimmed thick film and thin
film resistors provide consistent interchangeability
from one device to the next.
Port style: Manifold
SIGNAL FLOW/ REFERENCE
CONDITIONING PRESSURE RANGE
Unamplified (8.5 mV) ± 25 sccm AWM42150VH
Unamplified (54.7 mV) ± 1000 sccm (1 SLPM) AWM42300V
Amplified ± 1000 sccm (1 SLPM) AWM43300V
(1 Vdc to 5 Vdc)
Amplified + 6 SLPM AWM43600V
(1 Vdc to 5 Vdc)
Mass Airflow sensors contain a thin-film, thermally isolated bridge structure containing heater and
temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of
air or other gas over the chip.
State-of-the-art chip design and manufacturing techniques allow the microbridge to be remarkably
sensitive, fast, small. Used wherever airflow needs to be measured.
Supply voltage: 8 Vdc to 15 Vdc
Operating temperature: -25 °C to 85 °C (-13 °F to 185 °F)
Media compatibility: Dry gas only
AWM2000 Series
The AWM2000 Series microbridge mass airflow
sensor is a passive device comprised of two
Wheatstone bridges and has bidirectional sensing
capability. The heater control circuit is required for
operation per specifications. The sensing bridge
supply circuit is also required for operation per
specifications. These two circuits are not on board
the package and must be supplied in the
application. The differential amplifier is a useful
interface for the sensing bridge. It can be used to
introduce gain and to voltage offsets to the sensor
output.
Signal conditioning: Unamplified (-44,5 mVdc to
44,5 mVdc)
Port style: Straight
Sensor resistance: 5 kOhm
FLOW/PRESSURE RANGE REFERENCE
± 200 sccm AWM2100V
± 4.0 in H2O (10 mBar) AWM2200V
± 1000 sccm (1 SLPM) AWM2300V
MASS AIRFLOW
Mass Airflow
Sensors
11
www.honeywell.com/sensing
MASS AIRFLOW
AWM5000 Series - High flow
AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure
flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25
inches H2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error
possibilities due to orifice or bypass channel clogging.
The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and
the small sensing element allows 100 g of shock without compromising performance. The included
“AMP” compatible connector provides reliable connection in demanding applications.
Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature
compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow
range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All
calibration is performed by active laser.
Signal conditioning: Amplified (1 Vdc to 5 Vdc)
Port style: Threaded, ¼¨ NPT
FLOW/PRESSURE RANGE REFERENCE
0 SLPM to 5 SLPM (N2 calibration) AWM5101VN
0 SLPM TO 10 SLPM (N2 calibration) AWM5102VN
0 SLPM to 20 SLPM (CO2 calibration) AWM5104VC
0 SLPM to 20 SLPM (N2 calibration) AWM5104VN
AWM700 Series
AWM700 Series microbridge mass airflow sensors provide in-line flow measurement with a specially
designed bypass flow housing. The sensors measure flow as high as 200 standard liters per minute
(SLPM) while inducing a pressure drop of 1 inch H2O, typically. The AWM700 has a high flow range
capability in a small package.
Signal conditioning: Amplified (1 Vdc to 5 Vdc)
Port style: Tapered, 22 mm
FLOW/PRESSURE RANGE REFERENCE
+ 200 SLPM AWM720P1
CAUTION
PRODUCT DAMAGE
AWM Series Microbridge Mass Airflow Sensors
are not designed to sense liquid flow
and will be damaged by liquid flow
through the sensor.
Failure to comply with these
instructions could result in product
damage.
12 www.honeywell.com/sensing
Force sensors operate on the principle that the resistance of silicon implanted piezoresistors will increase when the
resistors flex under any applied force. The sensor concentrates force from the application, through the stainless steel
plunger, directly to the silicon sensing element. The amount of resistance changes in proportion to the amount of force
being applied. This change in circuit resistance results in a corresponding mV output level.
FSG Series
Plunger actuator - Force range 1500 g
Supply voltage: 360 mV span @ 10 Vdc
Operating temperature: -40 °C to 85 °C
-40 °F to 185 °F
Sensitivity: 0.20 mV/g min., 0.24 mV/g typ., 0.28 mV/g max.
Overforce: 5500 g
REFERENCE
Non-compensated FSG15N1A
FORCE
Force Sensors
FSL Series
Ball bearing actuator - Force range 500 g
Supply voltage: 60 mV span @ 5 Vdc
Operating temperature: -40 °C to 85 °C
-40 °F to 185 °F
Sensitivity: 0.10 mV/g min., 0.12 mV/g typ., 0.14 mV/g max.
Overforce: 4500 g
REFERENCE
Non-compensated FSL05N2C
13
www.honeywell.com/sensing
Relative Humidity/Temperature and Relative Humidity sensors are configured with integrated circuitry to provide on-
chip signal conditioning. These sensors contain a capacitive sensing die set in thermoset polymers that interacts with
platinum electrodes. The laser trimmed sensors have an interchangeability of + 5%RH, with stable, low drift
performance.
Absorption based humidity sensors provide both temperature and %RH (Relative Humidity) outputs. On-chip signal
processing ensures linear voltage output versus %RH. Sensor laser trimming offers + 5%RH accuracy, and achieves
2%RH accuracy with calibration. Packages are chemically resistant and operate in ranges of -40 °C to 85 °C (-40 °F to
185 °F) to accommodate harsh environments.
Supply voltage: 4.0 Vdc to 5.8 Vdc
Operating humidity range: 0 to 100% RH, non-condensing
Operating temperature range: -40 °C to 85 °C (-40 °F to 185 °F)
HUMIDITY
Humidity
Sensors
HIH Series
OPTIONS
HIH-3610 Monolithic integrated circuit
The HIH-3610 humidity sensor is designed specifically for high volume OEM
(Original Equipment Manufacturer) users. Direct input to a controller or other
device is made possible by this sensor’s linear voltage output. With a typical
current draw of only 200 µA, the HIH-3610 is ideally suited for low drain,
battery powered systems. Tight sensor interchangeability reduces or
eliminates OEM production calibration costs. Individual sensor calibration data
is available.
The HIH-3610 delivers instrumentation quality RH sensing performance in a
low cost, solderable SIP (Single In-line Package). Available in two lead spacing
configurations, the RH sensor is a laser trimmed thermoset polymer capacitive
sensing element with on-chip integrated signal conditioning.
Package style: Solderable SIP
12,70 MIN
(0.50)
9,47
(0.373)
1,27
(0.050) 2,54
(0.100)
3X 0,38
(0.015)
4,27
(0.168)
-
OUT
+
OUT
-+
4,27
(0.168)
2,54
(0.100) 5,08
(0.200)
12,19 MIN
(0.480)
1,90
(0.075)
9,47
(0.373)
2,03
(0.080)
3X 0,38
(0.015)
TERMINATION NIST CERTIFICATION REFERENCE
2,54 mm (0.100 in) Lead Pitch None HIH-3610-001
1,27 mm (0.050 in) Lead Pitch None HIH-3610-002
2,54 mm (0.100 in) Lead Pitch NIST Calibration sensor-specific printout HIH-3610-003
1,27 mm (0.050 in) Lead Pitch NIST Calibration sensor-specific printout HIH-3610-004
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be
sensitive to the electrostatic discharge (ESD). To prevent
ESD-induced damage and/or degradation, take normal ESD
precautions when handling this product.
Failure to comply with these instructions could result in
product damage
HIH-3602 Monolithic integrated circuit
HIH-3602-A and HIH-3602-C Relative Humidity (RH) sensors combine both
relative humidity and temperature sensing in a TO-5 housing with a
hydrophobic sintered stainless steel filter.
The temperature sensor is thermally connected with the RH sensor making the
HIH-3602-A/C ideal for measuring dew point and other absolute moisture
terms.
Package style: TO-5 can
Termination: 0,46 mm (0.18 in)
Nist Certification: NIST Calibration sensor-specific printout
TEMPERATURE SENSOR REFERENCE
100 kOhm ± 5 % @ 25 °C, NTC 0-50 C HIH-3602-A
1000 Ohm ± 0.2 % @ 0 °C, platinum RTD HIH-3602-C
HIH-3602-L Integrated circuit
The HIH-3602-L Relative Humidity (RH) sensor delivers instrumentation
quality RH sensing performance in a rugged, low cost, slotted TO-39 housing.
On-board signal conditioning reduces product development times while a
typical current draw of only 200 mA makes the HIH-3602-L perfect for battery
powered systems. This sensor should be shielded from bright light.
Package style: T0-39 can
Termination: 0,46 mm (0.18 in)
Nist Certification: None
REFERENCE
HIH-3602-L
14 www.honeywell.com/sensing
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be
sensitive to the electrostatic discharge (ESD). To prevent
ESD-induced damage and/or degradation, take normal ESD
precautions when handling this product.
Failure to comply with these instructions could result in
product damage
Honeywell temperature sensors feature two distinct series.These sensors are thin film RTDs (Resistance Temperature
Detectors) and are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast.
The TD Series Temperature Sensors are silicon-based RTDs. They offer 2000 Ohm nominal resistance at 20 °C
Temperature range of -40 °C to 150 °C.
The HEL Series Temperature Sensors are platinum RTDs, offering 100 Ohm or 1000 Ohm versions and temperature
ranges of -200 °C to 540 °C.
HEL-700 Series
100/1000 Ohm platinum RTD
Supply voltage: 4 Vdc to 9 Vdc
Base resistance 1000 ± 2 Ohm (± 0.2 %) @ 0 °C (Standard)
and interchangeability: 1000 ± 1 Ohm (± 0.1 %) @ 0 °C (Optional)
OPTIONS
HEL-700
Temperature range: -200 °C to 540 °C
-300 °F to 1000 °F
Packaging style/Termination: Radial chip/ribbon leads (Type A)
Radial chip/no leads (Type B)
SMT (Axial) flip chip/no leads (Type C)
Type A
Type B
Type C
Centre lead
not connected
TEMPERATURE
Temperature
Sensors
100 Ohm
(0.00385 Ohm/Ohm/°C DIN standard)
PACKAGING STYLE BASE RESISTANCE AND INTERCHANGEABILITY REFERENCE
Type A Standard HEL-700-T-0-A
Type A Optional HEL-700-T-1-A
Type B Standard HEL-700-T-0-B
Type B Optional HEL-700-T-1-B
1000 Ohm
(0.00375 Ohm/Ohm/°C)
PACKAGING STYLE BASE RESISTANCE AND INTERCHANGEABILITY REFERENCE
Type A Standard HEL-700-U-0-A
Type A Optional HEL-700-U-1-A
Type B Standard HEL-700-U-0-B
Type B Optional HEL-700-U-1-B
Type C Standard HEL-700-U-0-C
Type C Optional HEL-700-U-1-C
15
www.honeywell.com/sensing
HEL-700 Series
100/1000 Ohm platinum RTD (Continued)
HEL-705/707/711/712/716/717
Temperature range: HEL-705/711/716 -200 °C to 260 °C
-320 °F to 500 °F
HEL-707/712/717 -75 °C to 540 °C
-100 °F to 1000 °F
Packaging style: Ceramic case
Termination: 12 in leadwires
NIST calibration: None
100 Ohm
(0.00385 Ohm/Ohm/°C DIN standard)
BASE RESISTANCE AND INTERCHANGEABILITY REFERENCE
Standard HEL-705-T-0-12-00
Optional HEL-705-T-1-12-00
Standard HEL-707-T-0-12-00
Optional HEL-707-T-1-12-00
Standard HEL-711-T-0-12-00
Optional HEL-711-T-1-12-00
Standard HEL-712-T-0-12-00
Optional HEL-712-T-1-12-00
Standard HEL-716-T-0-12-00
Optional HEL-716-T-1-12-00
Standard HEL-717-T-0-12-00
Optional HEL-717-T-1-12-00
1000 Ohm
(0.00375 Ohm/Ohm/°C)
BASE RESISTANCE NIST CALIBRATION REFERENCE
AND INTERCHANGEABILITY
Standard HEL-705-U-0-12-00
Optional HEL-705-U-1-12-00
Standard HEL-707-U-0-12-00
Optional HEL-707-U-1-12-00
Standard HEL-711-U-0-12-00
Optional HEL-711-U-1-12-00
Standard HEL-712-U-0-12-00
Optional HEL-712-U-1-12-00
Standard HEL-716-U-0-12-00
Optional HEL-716-U-1-12-00
Optional NIST @ 0 and 100 °C HEL-716-U-1-12-C2
Standard HEL-717-U-0-12-00
Optional HEL-717-U-1-12-00
TEMPERATURE
TD Series
2000 Ohm silicon RTD
Supply voltage: 10 Vdc
Temperature range: -40 °C to 150 °C
-40 °F to 302 °F
OPTIONS
TD4A Liquid temperature sensor
PACKAGING STYLE TERMINATION REFERENCE
Threaded aluminium case Leadwires TD4A
TD5A Subminiature temperature sensor
PACKAGING STYLE TERMINATION REFERENCE
Plastic case SIP TD5A
16 www.honeywell.com/sensing
SS49/490 Series
Ratiometric hall effect
linear position sensor
Package style: Radial lead IC
Supply voltage: 4.5 to 10.5 Vdc
Operating temperature: -40 °C to 150 °C
-40 °F to 302 °F
Magnetic range: -670 to 670 Gauss
OPTIONS
Temperature compensated
Gate
2X 3˚
2X 48˚
2,54
0.10
4,06
0.16
3,0
1.12
3,2
0.125
15,0
0.59
0,76
0.03
1,3
0.05
2 x
0
+
-
0
+
-
3 x 3 x MAX
MAX
3 x 0,4
0.015
0,7
0.025
1,75
0.07
1
PACKAGE STYLE REFERENCE
SS495A
High accuracy SS495A1
High accuracy Surface mount SS495A1-S
Surface mount reel SS495A-SP
Honeywell’s Solid State Position Sensor family includes digital and analog Hall-effect position sensors,
magnetoresistive digital sensors, Hall-effect vane sensors, gear tooth sensors, Hall-effect basic switches,
and magnets. Solid State Position Sensors are reliable, high speed, long life, sensors and are directly
compatible with other electronic circuits.
Position sensors are used in applications which require accurate, reliable outputs. They are found in brushless
dc motors, utility meters, welding equipment, vending machines, home appliances, computers, etc.
SS40/400 Series
Hall effect digital
position sensor
SS400 Series position sensors have a thermally
balanced integrated circuit over full temperature
range. The negative compensation slope is
optimized to match the negative temperature
coefficient of lower cost magnets. Bipolar, latching
and unipolar magnetics are available.
Band gap regulation provides extremely stable
operation over 3.8 Vdc to 30 Vdc supply voltage
range.
Package style: Radial lead IC
Supply voltage: 3.8 Vdc to 30 Vdc
Operating temperature: -40 °C to 150 °C
-40 °F to 302 °F
1,3
0.05
(2)
(3)
(3)
1,7
0.07
4,1
0.16
2,5
0.10
48˚ (2)
3˚ (2)
3,0
0.12
14,99
0.59
0
0,43
0.017
0,38
0.015
Hall element
centre
_
+
OPTIONS
MAXIMUM Operating Point and MINIMUM
Release Point are specified @ 25 °C
Bipolar - temperature compensated
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
60 Gauss -60 Gauss SS411A
140 Gauss -140 Gauss SS413A
Bipolar - non temperature
compensated
Supply voltage: 4.5 to 24 Vdc
Operating temperature: -55 °C to 150 °C
-67 °F to 302 °F
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
150 Gauss -140 Gauss SS41
Unipolar - temperature
compensated
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
115 Gauss 20 Gauss SS441A
180 Gauss 75 Gauss SS443A
390 Gauss 235 Gauss SS449A
Bipolar latching- temperature
compensated
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
85 Gauss -85 Gauss SS461A
180 Gauss -180 Gauss SS466A
POSITION
Position Sensors
17
www.honeywell.com/sensing
SS49/490 Series
Ratiometric hall effect
linear position sensor
(Continued)
Non temperature compensated
1,27
0.05
2 x
3 x
MAX
(0)
3 x
1,75
0.07
4,1
0.16
2,54
0.10
2 X 48˚ ± 2˚
2 X 3˚ ± 2˚
GATE
3,0
0.12
2,03
0.08
0,43
0.017
0,38
0.015
3,17
0.125
+
-
0
_
+
Supply voltage: 4 to 10 Vdc
Operating temperature: -25 °C to 85 °C
-13 °F to 185 °F
Magnetic range: -1000 to 1000 Gauss
REFERENCE
SS49
Miniature Ratiometric hall effect
linear position sensor
SS490 Series MRL (Miniature Ratiometric Linear)
sensors have a ratiometric output voltage, set by
the supply voltage. It varies in proportion to the
strength of the magnetic field.
Temperature compensated
Gate
2X 3˚
2X 48˚
2,54
0.10
4,06
0.16
3,0
1.12
3,2
0.125
15,0
0.59
0,76
0.03
1,3
0.05
2 x
0
+
-
0
+
-
3 x
3 x MAX
MAX
3 x 0,4
0.015
0,7
0.025
1,75
0.07
1
MAGNETIC RANGE REFERENCE
-670 to 670 Gauss SS495B
-840 to 840 Gauss SS496B
SS500 Series
Hall effect digital
position sensor
Package style: Surface mount
Supply voltage: 3.8 to 30 Vdc
Operating temperature: -40 °C to 150 °C
-40 °F to 302 °F
NOMINAL
( PACKAGE
( HALL ELEMENT
.005 MAX FLASH
CATALOG
LISTING
DATE CODE
.005 MAX 6
.067
.164 ± .003
2X .059 ± .002 3X .016
( + ) ( - ) (0)
.173
N
S
3
.177 ± .004
OPTIONS
MAXIMUM Operating Point and MINIMUM
Release Point are specified @ 25 °C
Bipolar - temperature compensated
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
60 Gauss -60 Gauss SS511AT
140 Gauss -140 Gauss SS513AT
Bipolar - non temperature
compensated
Supply voltage: 4,5 to 24 Vdc
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
140 Gauss -140 Gauss SS51T
Unipolar - temperature
compensated
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
115 Gauss 20 Gauss SS541AT
180 Gauss 75 Gauss SS543AT
390 Gauss 235 Gauss SS549AT
Bipolar latching- temperature
compensated
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
85 Gauss -85 Gauss SS561AT
180 Gauss -180 Gauss SS566AT
POSITION
SS94 Series
Ratiometric hall effect
linear position sensor
The SS9 utilizes a Hall effect integrated circuit chip
which provides increased temperature stability
and performance. Laser trimmed thick film
resistors on the ceramic substrate and thin film
resistors on the integrated circuit reduce null and
gain shifts over temperature which results in
consistent sensitivity from one device to the next.
Package style: Ceramic
Supply voltage: 6.6 Vdc to 12.6 Vdc
Operating temperature: -40 °C to 125 °C
-40 °F to 257 °F
Magnetic range: -500 to 500 Gauss
SS94A1F -100 to 100 Gauss
OPTIONS
Temperature compensated
MAIN FEATURE REFERENCE
General purpose SS94A1
High sensitivity (25 mV/Gauss output @ 8 Vdc supply) SS94A1F
Noise shielded SS94A2
18 www.honeywell.com/sensing
2SS Series
Magnetoresistive digital
position sensor
2SS Series position sensors have
magnetoresistive material integrated on silicon
and encapsulated in a plastic package. The
integrated circuit provides a digital output in
response to very low magnetic fields. Though this
signal is identical to our digital Hall effect sensors,
it can be achieved by magnetoresistive sensors at
much greater sensor-to-magnet distances.
Supply voltage: 3.8 Vdc to 30 Vdc
Operating temperature: -40 °C to 150 °C
-40 °F to 302 °F
Maximum operating point: 25 Gauss
Minimum release point: 5 Gauss
2SS
IC CENTER
3,1
0.12 4,5
0.18
4,5
0.18
3,1
0.12
1,6
0.06
2x 45
˚
2x 5
˚
MAX
15,0
0.59
- O +
OPTIONS
Omnipolar
PACKAGE STYLE REFERENCE
Radial lead IC 2SS52M
Surface Mount 2SS52M-S
SR13 Series
Hall effect digital position
sensor
SR13 series Hall-effect digital position sensors
permit quick and easy sensor installation, with
snap-in and flat mount sensor packages, and can
house any of the present SS400 series sensors or
any similarly sized sensing elements.
Package style: Plastic snap-in
Supply voltage: 3.8 Vdc to 30 Vdc
Operating temperature: -40 °C to 150 °C
-40 °F to 302 °F
OPTIONS
MAXIMUM Operating Point and MINIMUM
Release Point are specified @ 25 °C
Unipolar
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
180 Gauss 75 Gauss SR13C-A1
115 Gauss 20 Gauss SR13D-A1
390 Gauss 235 Gauss SR13F-A1
Bipolar latching
OPERATING POINT RELEASE POINT REFERENCE
(MAXIMUM) (MINIMUM)
85 Gauss -85 Gauss SR13R-A1
SR16 Series
Cost effective
digital vane sensor
SR16 series competitively priced Hall-effect digital
vane sensors contain an internal magnet and Hall
effect sensor mounted in a twin tower
configuration.
Package style: Dual tower
Supply voltage: 3.8 Vdc to 30 Vdc
Operating temperature: -20 °C to 85 °C
-4 °F to 185 °F
OPTIONS
Type J4
Type J6
Type N
PACKAGE STYLE REFERENCE
PCB/Molex 557 connector SR16C-J4
Wire exit SR16C-J6
PCB mount leads SR16C-N
POSITION
19
www.honeywell.com/sensing
SR17 Series
Cost effective
digital vane sensor
SR17 series competitively priced Hall-effect digital vane sensors are designed for position and speed
sensing and are offered in a side-mount twin tower package.
Package style: Side looker mounting
Supply voltage: 3.8 Vdc to 30 Vdc
Operating temperature: -20 °C to 85 °C
-4 °F to 185 °F
OPTIONS
Type J6
Type J7
PACKAGE STYLE REFERENCE
Side mount wire exit SR17C-J6
41 in wire leads and connector SR17C-J7
POSITION
20 www.honeywell.com/sensing
Optoelectronics is the integration of optical principles and semi-conductor electronics. Optoelectronic components are
reliable, cost effective sensors. Standard infrared emitting diodes (IREDs), sensors and assemblies are covered.
Infrared sensors are used for presence sensing, motion sensing, position encoding, limit sensing, movement detection
and counting.
Infrared emitting diodes
OPTIONS
Metal package, end-emitting
Coaxial, lead case - SE1450/1470(L)
Miniature pill - SE2460/2470
TO-46, flat window - SE3455/3470
TO-46, dome lensed - SE5455/5470
Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F)
OUTPUT WAVELENGTH (nm) BEAM ANGLE (°) POWER OUTPUT REFERENCE
935 24 0.70 mW min. SE1450-003L
880 24 1.10 to 4.50 mW/cm²SE1470-003L
935 18 1.00 mW min. SE2460-003
880 18 6.0 mW/sr min. SE2470-002
935 90 5.4 mW min. SE3455-004
880 90 10.5 mW min. SE3470-003
935 20 4.8 mW min. SE5455-003
880 20 3.5 mW/cm² min. SE5470-004
Plastic package
T1, end-emitting - SEP8505/8705
Side-emitting - SEP8506/8706
Side-emitting - SEP8736
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
OUTPUT WAVELENGTH (nm) BEAM ANGLE (°) POWER OUTPUT REFERENCE
935 15 2.0 to 4.0 mW/cm²SEP8505-003
935 50 0.33 to 0.52 mW/cm²SEP8506-002
880 15 2.7 to 7.8 mW/cm²SEP8705-003
880 10 1.7 to 3.0 mW/cm²SEP8736-003
Ceramic discrete surface mount - glass lens
Note:
This device can be mounted with the lens up or down, looking through PCB.
Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F)
OUTPUT WAVELENGTH (NM) BEAM ANGLE (°) POWER OUTPUT REFERENCE
880 24 0.60 mW/cm² min. SME2470-021
INFRARED
Infrared
Products
21
www.honeywell.com/sensing
Phototransistors
OPTIONS
Metal package
Coaxial, lead case - SD1440(L)
Miniature pill - SD2440
TO-46, flat window - SD3443
TO-46, dome lensed - SD5443
Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F)
ANGULAR RESPONSE (°) LIGHT CURRENT MINUMUM (mA) REFERENCE
24 3.0 SD1440-003L
48 7.0 SD2440-004
90 2.0 SD3443-003
18 8.0 SD5443-003
INFRARED
Plastic package
T1, end-looking - SDP8405
Side-looking- SDP8406
Side-looking - SDP8436
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
ANGULAR RESPONSE (°) LIGHT CURRENT MINUMUM (mA) REFERENCE
20 12.0 SDP8405-003
50 1.80 SDP8406-002
18 7.0 SDP8436-003
Ceramic discrete surface mount - glass lens
Top-looking - SMD2420/2440
Note:
This device can be mounted with the lens up or down, looking through PCB.
Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F)
ANGULAR RESPONSE (°) LIGHT CURRENT MINUMUM (mA) REFERENCE
28 3.0 SMD2440-012
22 www.honeywell.com/sensing
Optoschmitt detectors
OPTIONS
Metal package
TO-46, dome lensed
Operating temperature: -40 °C to 100 °C (-40 °F to 212 °F)
Supply voltage: 16.0 V
Output: 10 kOhm Pull-up
Angular response: 12°
OUTPUT LOGIC TURN-ON THRESHOLD IRRADIANCE REFERENCE
Buffer 2.5 mW/cm² max. SD5600-001
Inverter 2.5 mW/cm² max. SD5610-001
Buffer 0.25 mW/cm²SD5620-001
Inverter 0.25 mW/cm²SD5630-001
Plastic package
Side-looking
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Supply voltage: 16.0 V
Output: 10 kOhm Pull-up
Angular response: 50°
OUTPUT LOGIC TURN-ON THRESHOLD IRRADIANCE REFERENCE
Buffer 2.5 mW/cm² max. SDP8600-001
Encoder sensors
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Turn-on threshold irradiance: 0.05 mW/cm² to 2.0 mW/cm²
Supply voltage: 4.5 Vdc to 5.5 Vdc
Package style: Plastic, PC mount
OPTIONS
Side-looking - HLC2705
PC mount - HOA0901/0902
OUTPUT OPTION REFERENCE
Speed and direction HLC2705-001
Direction, inverting logic HOA0901-011
Speed and direction, 2 tachometer HOA0902-011
INFRARED
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
23
www.honeywell.com/sensing
Reflective sensors
OPTIONS
Metal components
Converging/focused optical axis - HOA1180
Converging/focused optical axis - HOA2498
Operating temperature: -55 °C to 100 °C (-67 °F to 212 °F)
Output: Transistor
ON-STATE COLLECTOR CURRENT REFERENCE
0.16 mA HOA1180-002
0.16 mA HOA2498-002
Plastic package
HLC1395 Series, short distance detection
HOA Series
Converging/focused optical axis - HOA0149
HOA1397
Converging/focused optical axis - HOA1405
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Output: Transistor
ON-STATE COLLECTOR CURRENT REFERENCE
0.60 mA HLC1395-002
Low profile 1.00 mA HOA0149-001
0.70 mA HOA1397-002
0.80 mA HOA1405-002
INFRARED
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
24 www.honeywell.com/sensing
Transmissive sensors,
Phototransistor output
OPTIONS
Metal components
HOA1877
Aperture (emitter and detector): Ø 1,27 mm (0.050 in)
Operating temperature: -55 °C to 100 °C (-67 °F to 212 °F)
Output: Transistor
ON-STATE COLLECTOR CURRENT REFERENCE
0.1 mA HOA1877-001
Plastic components
HOA086X/087X
HOA1879
HOA1882
Aperture (emitter and detector): Ø 1,52 mm (0.060 in)
Plastic components, wire leads
HOA088X/089X
Wire colour code and functions
Red - IRED Anode White - Detector Collector
Black - IRED Cathode Green - Detector Emitter
HOA1870
Wire colour code and functions:
Orange - IRED Anode White - Detector Collector
Green - IRED Cathode Blue - Detector Emitter
Aperture (emitter and detector): 0,15 mm (0.006 in) wide
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Output: Transistor
ON-STATE COLLECTOR CURRENT REFERENCE
1.00 mA HOA0866-T55
Opaque housing 0.50 mA HOA0870-N51
0.50 mA HOA0880-P51
Opaque housing 0.50 mA HOA0890-L55
0.30 mA HOA1870-031
0.50 mA HOA1879-015
1.80 mA HOA1882-012
INFRARED
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
25
www.honeywell.com/sensing
Transmissive sensors,
Optoschmitt output
OPTIONS
Plastic components
HOA096X/097X
HOA696X/697X
Plastic components, wire leads
HOA698X/699X
Wire colour code and functions:
Red - IRED Anode White - Detector Vcc
Black - IRED Cathode Blue - Detector Output
Green - Detector Ground
INFRARED
Plastic components, integral 3 pin connector
HOA7720/30
Operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
OUTPUT OUTPUT LOGIC HYSTERESIS REFERENCE
10 kOhm Pull-up Buffer 10 % HOA0961-N51
Opaque housing 10 kOhm Pull-up Buffer 10 % HOA0971-N51
Open-Collector Inverter 5 % HOA6963-N51
Opaque housing Totem-Pole Inverter 5 % HOA6972-N55
Open-Collector Buffer 5 % HOA6981-L51
Opaque housing Totem-Pole Buffer 5 % HOA6990-T51
Totem-Pole Inverter 5 % HOA7720-M22
Open-Collector Inverter 5 % HOA7730-M22
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
26 www.honeywell.com/sensing
Current sensors monitor ac or dc current. Included are adjustable linear, null balance, digital, and linear current
sensors.
Digital current sensors can sound an alarm, start a motor, open a valve or shut down a pump. The linear signal
duplicates the waveform of the current being sensed, and can be used as a feedback element to control a motor or
regulate the amount of work being done by a machine.
CSN Series
Closed Loop Current Sensors
Closed loop current sensors measure ac, dc and impulse currents over 0-25,
0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN series is based on the
Hall effect principle and the null balance or zero magnetic flux method
(feedback system). The magnetic flux in the sensor core is constantly
controlled at zero. The amount of current required to balance zero flux is the
measure of the primary current flowing through the conductor, multiplied by
the ratio of the primary to secondary windings. This closed loop current is the
output from the device and presents an image of the primary current reduced
by the number of secondary turns at any time. This current can be expressed
as a voltage by passing it through a resistor.
The CSN Series has a high overload capacity, a high level of electrical
insulation between primary and secondary circuits and a rapid response rate.
Lightweight and compact, and with no restriction on input current waveform,
the sensors are ideal for variable speed drives, power supplies, feedback
control systems, robotics/welding equipment and general overcurrent
protection.
Sensed current type: ac or dc
EMC: EN 50082-2, EN 50081-2
Accuracy: ± 0.5 %
OPTIONS
Multi turn PCB mounted
Housing material: Bayblend KU2-1468 (UL94-V0)
Mounting: PCB on 13 pins
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 36 A 1000 (110 Ohm coil) ± 15 Vdc CSNE151
12,7 (0.50)
4,0 (0.16)
Ø 1,25 (0.05)
(Primary pin)
Ø 0,80 (0.03)
Secondary pin)
31,8 (1.25)
20,3 (0.80)
PIN 1
PIN 1
7,7 (0.27)
2,9 (0.114)
7,75 (0.305)
9,50 (0.37)
2,54 (0.100)
2,54 (0.100)
1,60 (0.06)
DIRECTION
OF CURRENT
I +
DIRECTION
OF CURRENT
I +
-
+ 0
SENSED NOMINAL COIL TURNS SUPPLY VOLTAGE REFERENCE
CURRENT RANGE CURRENT
± 90 A 25 A 1000 (66 Ohm coil)± 12 Vdc to 15 Vdc CSNE151-100
± 90 A 50 A 1000 (66 Ohm coil)± 12 Vdc to 15 Vdc CSNE151-200
CURRENT
Current
Sensors
27
www.honeywell.com/sensing
Small housed style
Housing material: Bayblend FR 1440 (UL94-V0)
Mounting: PCB on 3 pins
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 70 A 1000 (90 Ohm coil) ± 15 Vdc CSNA111
± 90 A 1000 (50 Ohm coil) ± 13 Vdc CSNC241-500
± 100 A 2000 (160 Ohm coil) ± 15 Vdc CSNB121
± 100 A 2000 (130 Ohm coil) ± 15 Vdc CSNB131
Small housed family
Housing material: Bayblend KU2-1468 (UL94-V0)
Mounting: PCB on 3 pins
Pinout style ‘A’
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 90 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNP661
± 150 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNT651
± 180 A 2000 (100 Ohm coil) ± 15 Vdc CSNG251
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 90 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNP661-002
± 150 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNT651-001
Pinout style ‘B’
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 150 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNF161
± 180 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNF151
± 200 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNR151
± 200 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNR161
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 150 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNF161-002
± 200 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNR151-002
± 200 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNR161-002
CURRENT
28 www.honeywell.com/sensing
CSN Series
Closed Loop Current Sensors (Continued)
Mid range housed style
Housing material: Bayblend KU2-1468 (UL94-V0)
Mounting: Panel, spade terminals x 3
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 600 A 2000 (25 Ohm coil) ± 12 to ± 18 Vdc CSNJ481
± 600 A (fitted with busbar) 2000 (25 Ohm coil) ± 12 to ± 18 Vdc CSNJ481-001
Large housed style
Housing material: Bayblend KU2-1468 (UL94-V0)
Mounting: Panel, spade terminals x 3
SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE
± 1200 A 5000 (50 Ohm coil) ± 15 to ± 24 Vdc CSNK591
± 1200 A (fitted with busbar) 5000 (50 Ohm coil) ± 15 to ± 24 Vdc CSNK591-001
CSLA Series
Open Loop Current Sensors
CS series linear current sensors incorporate our 91SS12-2 and SS94A1linear
output Hall effect transducer (LOHET™). These sensors cover measuring
ranges from 0-950 Amps. The sensing element is assembled in a printed
circuit board mountable housing. This housing is available in four
configurations. Normal mounting is with 0.375 inch long 4-40 screw and
square nut (not provided) inserted in the housing or a 6-20 self-tapping
screw. The combination of the sensor, flux collector, and housing comprises
the holder assembly. These sensors are ratiometric.
Sensed current type: ac or dc
Housing: PBT Polyester
OPTIONS
PCB bottom mount
SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE
0 to 75 A 8 to 16 Vdc CSLA1DE
0 to 92 A 6 to 12 Vdc CSLA2DE
0 to 150 A 6 to 12 Vdc CSLA2DG
0 to 225 A 8 to 16 Vdc CSLA1DJ
0 to 225 A 6 to 12 Vdc CSLA2DJ
0 to 325 A 8 to 16 Vdc CSLA1DK
0 to 400 A 6 to 12 Vdc CSLA2DK
CURRENT
29
www.honeywell.com/sensing
PCB bottom mount
SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE
0 to 57 A 8 to 16 Vdc CSLA1CD
0 to 72 A 6 to 12 Vdc CSLA2CD
0 to 100 A 8 to 16 Vdc CSLA1CF
0 to 150 A 8 to 16 Vdc CSLA1CH
PCB bottom mount
SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE
0 to 310 A 6 to 12 Vdc CSLA2EJ
0 to 550 A 6 to 12 Vdc CSLA2EL
0 to 625 A 8 to 16 Vdc CSLA1EL
0 to 765 A 6 to 12 Vdc CSLA2EM
0 to 950 A 6 to 12 Vdc CSLA2EN
PCB side mount
SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE
0 to 57 A 8 to 16 Vdc CSLA1GD
0 to 72 A 6 to 12 Vdc CSLA2GD
CURRENT
PCB side mount
SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE
± 45 A 4.5 to 10.5 Vdc CSLH3A45
Digital current sensor
OPERATE CURRENT SUPPLY VOLTAGE REFERENCE
3.5 A.t Nominal 6 to 16 Vdc CSDA1BC
30 www.honeywell.com/sensing
LIQUID LEVEL
Honeywell liquid level sensor components incorporate a voltage level switch which provides a digital
output that denotes the presence or absence of liquid.
The mode of operation is derived from the principle of total internal reflection. An LED and detector are
housed within a plastic dome at the head of the device. When no liquid is present, all light from the LED is
totally internally reflected from the dome boundary to the detector. When liquid covers the dome, the
effective refractive index at the dome/liquid boundary changes, allowing some light from the LED to
escape. Thus the amount of light received by the voltage level switch is reduced and the output switches,
denoting the presence of liquid. This method of liquid level sensing is very fast, and instantaneous for
water.
The LL Series is a basic component which requires external circuit protection; this protection is
incorporated in the LLE Series.
Housing: Polysulphone
Termination: 250 mm lead wires
Supply voltage: +5 Vdc
Pressure range: 0 to 5 bar
LL Series
Operating temperature:
Standard -20 °C to 85 °C
-4 °F to 185 °F
High temperature -40 °C to 125 °C
-40 °F to 257 °F
Storage temperature:
Standard -40 °C to 100 °C
-40 °F to 212 °F
High temperature -50 °C to 150 °C
-58 °F to 302 °F
OPTIONS
Type 2
SEAL WASHER REFERENCE
High temperature Vamac LL102101
Type 3
SEAL WASHER REFERENCE
Standard Nitrile rubber LL103000
High temperature Vamac LL103101
Type 5
SEAL WASHER REFERENCE
High temperature Nitrile rubber LL105100
Liquid Level
Sensors
LLE Series
Operating temperature: -25 °C to 80 °C
-13 °F to 176 °F
Storage temperature: -30 °C to 85 °C
-22 °F to 185 °F
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
;y
Vcc
RED
OUTPUT
GREEN
SCHMITT
TRIGGER
PHOTO
TRANSISTOR
0 V
BLUE
IRED
VOLTAGE
REGULATOR
OPTIONS
Type 2
19,00
(0.75)
22,49
(0.89)
19,40
(0.76)
12,45
(0.49)
4,70
(0.19)
M12 x 1 - 8 g
0,22 mm
Tinned Ends
2
(0.01 in )
2
SEAL WASHER REFERENCE
Nitrile rubber LLE102000
Type 5
Ø10,00
+0,10
-0
4,1
(0.16)
13,0
(0.51)
2,3
(0.09)
16,12
(0.63)
0,22 mm
Tinned Ends
2
(0.01 in )
+0.004
-0
(0.39 )
2
SEAL WASHER REFERENCE
Nitrile rubber LLE105000
31
www.honeywell.com/sensing
These listings include standard size basics, miniature, subminiature, switches. The precision snap-action
mechanisms are offered with a wide variety of actuators and operating characteristics. Basic switches are
ideal for applications requiring compactness, light weight, accurate repeatability and long life.
They are best used for presence/absence detection where physical contact with object is permissible. Very
economical.
BA/BE/BZ Series
Basic Switches
BA/BE/BZ Series Standard Basic Switches are used
for simple or precision on/off application needs.
As well as the catalogue listings presented here,
we offer other versions with higher temperature
ratings, different termination options, different
electrical ratings and Single Pole, Single Throw
(SPST) circuitry. Refer to our website for details.
Voltage: 250 Vac
Electrical rating: 16 A
Operating temperature: -55 °C to 85 °C
-67 ° F to 185 °F
Termination: Screw
Contact type: Silver
Approvals: CE, CSA, UL
Switching options: SPDT
Single Pole, Double Throw
OPTIONS
Note: BA/BE plunger position distance from
mounting hole = 19 mm (0.75 in)
Top pin plunger
Approvals: BE-2R-A4 CSA, UL
ELECTRICALRATING TERMINATION REFERENCE
Solder BZ-R
Screw BZ-R-A2
Solder BZ-R169
Screw BZ-2R-A2
25 A Screw BE-2R-A4
Overtravel plunger - standard
ELECTRICAL RATING REFERENCE
BZ-2RD-A2
20 A BA-2RB-A2
Panel mount overtravel plunger
ELECTRICAL APPROVALS REFERENCE
RATING
BZ-2RQ1-A2
20 A DEMKO BA-2RQ1-A2
BASIC SWITCHES
Basic Switches
Overtravel plunger (splash
resistant)
REFERENCE
BZ-2RDS-A2
Stainless steel spring BZ-2RDS-A2S
Overtravel roller plunger
REFERENCE
BZ-2RQ18-A2
32 www.honeywell.com/sensing
DT Series Basic Switch
DT Series Standard Basic Switches consist of two
independent single-pole double throw circuits in
one housing actuated by one actuator. The
terminals are separated by a non-conductive
shield to reduce shorting.
Voltage: 250 Vac
Electrical rating: 10 A
Operating temperature: -55 °C to 85 °C
-67 ° F to 185 °F
Termination: Screw
Contact type: Silver
Approvals: CSA, UL
Switching options: DPDT
Double Pole, Double Throw
OPTIONS
Top pin plunger
REFERENCE
DT-2R-A7
Basic Switch Accessories
A range of accessories is available for BA, BE, BZ
and DT switches, such as the 5PA2 terminal
enclosure. For more information please contact
your local sales office.
TB Series
Miniature Double-break
Basic Switch
TB Series Miniature Double-break Basic Switches
are basic double-break units that offer a means of
controlling isolated circuits. Each circuit may be
driven by an independent voltage source.
Voltage: 250 Vac
Electrical rating: 10 A
Operating temperature: -55 °C to 125 °C
-67 ° F to 257 °F
Termination: Solder
Contact type: Silver
Approvals: CSA, UL
Switching options: (SPDT DB)
Single Pole, Double Throw, Double Break
OPTIONS
Top pin plunger
REFERENCE
1TB1-2
BASIC SWITCHES
BA/BE/BZ Series
Basic Switches
(Continued)
Overtravel roller plunger,
perpendicular
REFERENCE
BZ-2RQ181-A2
Straight lever
ELECTRICAL APPROVALS LEVER RADIUS REFERENCE
RATING
20 A DEMKO BA-2RV-A2
BZ-2RW80-A2
No return spring BZ-2RW84-A2
152,4 mm BZ-2RW863-A2
Roller lever
TERMINATION LEVER REFERENCE
RADIUS
BZ-2RW822-A2
Solder BZ-2RW822
Splash resistant BZ-2RW8225551-A2
One way, BZ-2RW826-A2
32,1 mm
48,3 mm BZ-2RW82-A2
33
www.honeywell.com/sensing
BASIC SWITCHES
SM and SX Series
Subminiature
Basic Switches
SM and SX Series Subminiature Basic Switches
are used for simple or precision on/off application
needs. These switches combine small size and
light weight with ample electrical capacity,
precision operation and long life. The SX Series
are small, precision, snap-action switches that are
ideal where savings in space and weight are
important.
Voltage: 250 Vac
Operating temperature: -55 °C to 125 °C
-67 ° F to 257 °F
Termination: Solder
Contact type: Silver
Switching options: SPDT
Single Pole, Double Throw
SM Series
Approvals: CE, CSA, UL
Ampere rating: 5 A
OPTIONS
Top pin plunger
Approvals: 11SM601-H4 UL, CSA
TERMINATION REFERENCE
11SM1
Quick connect 11SM601-H4
Straight lever
REFERENCE
Lever length 4,83 mm 111SM1
Roller lever
REFERENCE
111SM2-T
SX Series
Approvals: CE, CSA, UL
Ampere rating: 5 A
OPTIONS
Top pin plunger
Approvals: 6SX7-T UL, CSA
CONTACTS AMPERE RATING REFERENCE
Silver 7 A 1SX1-T
Silver 3 A 11SX1-T
Gold 1 A 6SX7-T
Straight lever
REFERENCE
Lever length ‘A’ 12,8 mm 311SX2-T
Lever length ‘A’ 24,5 mm 311SX3-T
Simulated roller
REFERENCE
311SX5-T
34 www.honeywell.com/sensing
V5 Series
Miniature Basic Switches
V5 Series Basic Switches are used for simple or
precision on/off, end of limit, presence/absence,
pressure, temperature and manual operator
interface application needs.
Voltage: 250 Vac
Operating temperature:
Standard -55 °C to 85 °C
-67 °F to 185 °F
High temperature -55 °C to 150 °C
-67 °F to 302 °F
Termination: 6,3 mm x 0,8 mm Quick connect
(QC)
Contact type: Silver/silver cadmium oxide
Electrical rating: V5A 20 A
V5B/P/R 16 A
V5C/D 10 A
V5S 22 A
Switching options: SPDT
Single Pole Double Throw
OPTIONS
Top pin plunger
NC 2
NO 4
C1
22,2
20,2
2,8
Ø3,1
2,8
3,1
10,3
3,4
Lever slot position 1Lever slot position 2
10,3
4,4
28,8
14,1
8,1
2,8
15,9
14,7
Operating
position
APPROVALS REFERENCE
CE, ENEC V5A010CB
CE, CSA, ENEC, UL V5B010CB3
CE, CSA, UL 4,8 mm x 0,5 mm QC V5B010FB3
CE, ENEC Solder terminals V5B010TB
CE, ENEC High temperature V5B210CB
CE, ENEC V5C010BB
CE, CSA, ENEC, UL 4,8 mm x 0,5 mm QC V5C010EB3
CE, CSA, ENEC, UL Solder terminals V5C010TB3
CE, ENEC V5P010CB
APPROVALS SWITCHING OPTIONS REFERENCE
CE, ENEC SPNO V5D030BB
CE, ENEC SPNO V5R030CB
CE, BEAB SPNC V5S020CB
CE, BEAB SPNO V5S030CB
Straight lever
Type B
15,3
(O.P.)
1,6
(P.T.) 22
8,1
APPROVALS REFERENCE
CE, CSA, ENEC, UL V5C010BB3B
Type C
35,6
3,2
(P.T.)
15,3
(O.P.)
8,1
APPROVALS REFERENCE
CE, ENEC High temperature V5B210CB1C
Type G
59,5
15,3
(O.P.)
6,4
(P.T.)
8,1
APPROVALS REFERENCE
CE, ENEC V5C010BB1G
Roller lever
Type D
20,6
1,6
(P.T.)
20,6
(O.P.)
8,1
APPROVALS REFERENCE
CE, CSA, ENEC, UL High temperature V5B210CB3D
CE, CSA, ENEC, UL V5C010BB3D
Type E
20,6
(O.P.)
3,2
(P.T.)
34
8,1
APPROVALS REFERENCE
CE, CSA, ENEC, UL Lever position 2 V5A010CB4E
CE, ENEC High temperature V5B210CB1E
BASIC SWITCHES
35
www.honeywell.com/sensing
BASIC SWITCHES
V7 Series
Miniature Basic Switches
V5 and V7 Series Basic Switches are used for
simple or precision on/off, end of limit, presence/
absence, pressure, temperature and manual
operator interface application needs.
The V7 Series also offers listings with Single Pole,
Single Throw circuitry (available in either normally
open (NO) or normally closed (NC)
configurations). Refer to our website for details.
Operating temperature:
Standard -40 °C to 82 °C
-40 °F to 180 °F
High temperature -40 °C to 200 °C
-40 °F to 350 °F
Termination: Quick connect (QC)
D8, E8 - 4,8 mm (0.187 in) x 0.5 mm (0.02 in)
E9 - 6,35 mm (0.25 in) x 0,80 mm (0.032 in)
Printed circuit board (PCB)
Electrical rating Contact Type
V7-*A 5 A Silver
V7-*B 11 A Silver
V7-*C/W 15 A Silver
V7-*D 1 A Gold alloy
V7-*E 10 A Silver
V7-*S 100 mA Gold alloy
V7-*V 21 A Silver alloy
V7-*Z 25 A Silver cadmium oxide
Approvals: CSA, UL, ENEC
V7-*C/D/W CSA, UL
Switching options: SPDT
Single Pole Double Throw
AVAILABLE TERMINALS
Quick Connect (QC)
D8 terminals are European approved when used
with electrical ratings A, B, D, E or S. International
approving agencies require that switches with
these terminals have insulated receptacles or
connector.
E8 terminals are European approved when used
with electrical ratings A, B, D, E or S.
E9 terminals are European approved when used
with electrical ratings A, B, D, E, S, V or Z.
Printed circuit board (PO2)
These terminals interface with snap-on receptacles
and other components from AMPNODU
interconnection system.
PCB terminals are European approved when used
with electrical ratings A, B, D, E, S.
OPTIONS
Top pin plunger
10,2
.40 6,4
.25
COM NC
NO
2,8
.11
1,5
0.06
8,9
.35
0,8
.03
2,4
.10
14,4
.57
22,2
.88
28,8
1.14
3,20
.126
3,46
.134
OPT
18,2
.72
(3)
DIA
3,10
.122
OPT
2,90
.114
10,3
.41
DIA
20,2
.80
2,8
.11
2,8
.11
1,0
.04
2,90
.114 Ø hole (3,10/.122 option)
MAX
Note: The optional mounting hole dimensions
shown above are standard on V5/V7 International
Series switches.
VOLTAGE TERMINATION REFERENCE
250 Vac V7-1A17D8
250 Vac PCB V7-1A17P02
250 Vac V7-1B17D8
250 Vac V7-1B19E9
250 Vac V7-1C17D8
277 Vac V7-1C17E9
277 Vac V7-1C18E9
125 Vac V7-1D10D8
277 Vac V7-1E10D8
277 Vac PCB V7-1E17P02
277 Vac V7-1E19E9
125 Vac V7-1S17D8
277 Vac V7-1V19E9
250 Vac V7-1Z19E9
250 Vac V7-2A17E9
250 Vac V7-2B17D8
277 Vac V7-2B17E9
277 Vac PCB V7-2B17P02
125 Vac V7-2S17D8
250 Vac V7-3A17D8
277 Vac V7-3E10E8
277 Vac V7-3E10E9
277 Vac V7-3E17D8
277 Vac V7-3E17E9
277 Vac V7-3E19E9
125 Vac V7-3S17E9
250 Vac V7-4A17D8
250 Vac V7-4A18E9
125 Vac V7-4S17D8
125 Vac V7-5D17E9
277 Vac V7-6B19D8
277 Vac V7-6C17D8
277 Vac V7-7A19D8
Straight lever
Type -002
VOLTAGE REFERENCE
277 Vac V7-1C17D8-002
277 Vac V7-1C17E9-002
277 Vac V7-2B17E9-002
277 Vac V7-6C18D8-002
36 www.honeywell.com/sensing
V7 Series
Miniature Basic Switches
(Continued)
Straight lever
Type -022
VOLTAGE REFERENCE
250 Vac V7-1A17D8-022
277 Vac V7-1B19D8-022
277 Vac V7-1C17D8-022
277 Vac V7-1C18E9-022
125 Vac V7-1S17D8-022
250 Vac V7-2A17D8-022
277 Vac V7-2B17D8-022
125 Vac V7-2S17D8-022
277 Vac V7-3E17E9-022
125 Vac V7-3S17D8-022
125 Vac V7-3S17E9-022
Type -048
VOLTAGE REFERENCE
277 Vac V7-1B17D8-048
277 Vac V7-1C17D8-048
277 Vac V7-1V19E9-048
277 Vac V7-2B17D8-048
277 Vac V7-2B19E9-048
125 Vac V7-3S17D8-048
277 Vac V7-6C18D8-048
250 Vac High temperature V7-9W1AE9-048
BASIC SWITCHES
Roller lever
Type -201
VOLTAGE REFERENCE
277 Vac V7-1C17D8-201
277 Vac V7-1C17E9-201
125 Vac V7-1S17D8-201
277 Vac V7-2B17D8-201
125 Vac V7-2S17D8-201
277 Vac V7-7B17D8-201
Type -207
VOLTAGE REFERENCE
277 Vac V7-1B10E9-207
277 Vac V7-1C17D8-207
277 Vac V7-1C17E9-207
125 Vac V7-1S17D8-207
277 Vac V7-1V19E9-207
250 Vac V7-2A17D8-207
277 Vac V7-2B17D8-207
125 Vac V7-7D17D8-207
Simulated roller lever
Type -263
VOLTAGE REFERENCE
277 Vac V7-1B17D8-263
277 Vac V7-1C17D8-263
125 Vac V7-1S17D8-263
125 Vac V7-2S17D8-263
125 Vac V7-3S17E9-263
277 Vac V7-6C17D8-263
277 Vac V7-7B19D8-263
37
www.honeywell.com/sensing
Index
INDEX
111SM1 ................................. 33
111SM2-T ............................. 33
11SM1 ................................... 33
11SM601-H4 ......................... 33
11SX1-T ................................ 33
141PC15G ............................... 9
142PC01D ............................... 9
142PC01G ............................... 9
142PC02G ............................... 9
142PC05D ............................... 9
142PC05D97 ........................... 9
142PC05G ............................... 9
142PC15A ............................... 9
142PC15AW95 ........................ 9
142PC15G ............................... 9
143PC03D ............................... 9
143PC05DW ............................ 9
162PC01D ............................... 9
163PC01D36 ........................... 9
163PC01D48 ........................... 9
163PC01D61 ........................... 9
163PC01D75 ........................... 9
164PC01D37 ........................... 9
164PC01D76 ........................... 9
1SX1-T .................................. 33
1TB1-2 .................................. 32
24PC01SMT ............................ 5
24PC05SMT ............................ 5
24PC15SMT ............................ 5
24PCAFA6G ............................. 4
24PCBFA6D ............................. 4
24PCBFA6G ............................. 4
24PCCFA6D ............................. 4
24PCCFA6G ............................. 4
24PCCFG6G ............................. 4
24PCDFA6D ............................. 4
24PCDFA6G ............................. 4
24PCDFG6G ............................ 4
24PCEFA6D ............................. 4
24PCEFA6G ............................. 4
24PCFFA6D.............................. 4
24PCFFA6G.............................. 4
26PC01SMT ............................ 5
26PC05SMT ............................ 5
26PC15SMT ............................ 5
26PCAFA6D ............................. 4
26PCAFA6G ............................. 4
26PCAFG6G ............................. 4
26PCBFA6D ............................. 4
26PCBFA6G ............................. 4
26PCCFA6D ............................. 4
26PCCFA6G ............................. 4
26PCCFG6G ............................. 4
26PCDFA6D ............................. 4
26PCDFA6G ............................. 4
26PCDFG2G ............................ 5
26PCFFA6G.............................. 4
26PCFFG6G ............................. 4
26PCFFU5G ............................. 5
26PCGFA6D ............................. 4
2SS52M ................................ 18
2SS52M-S ............................. 18
311SX2-T .............................. 33
311SX5-T .............................. 33
40PC001B1A ........................... 8
40PC006G1A ........................... 8
40PC015G1A ........................... 8
40PC015V1A ........................... 8
40PC030G1A ........................... 8
40PC100G1A ........................... 8
40PC150G1A ........................... 8
40PC250G1A ........................... 8
40PC500G1A ........................... 8
6SX7-T .................................. 33
AWM2100V ........................... 10
AWM2200V ........................... 10
AWM2300V ........................... 10
AWM3100V ........................... 10
AWM3200V ........................... 10
AWM3300V ........................... 10
AWM42150VH ....................... 10
AWM42300V ......................... 10
AWM43300V ......................... 10
AWM43600V ......................... 10
AWM5101VN ......................... 11
AWM5102VN ......................... 11
AWM5104VC ......................... 11
AWM5104VN ......................... 11
AWM720P1 ........................... 11
BA-2RB-A2 ............................ 31
BA-2RQ1-A2 .......................... 31
BA-2RV-A2 ............................ 32
BE-2R-A4 .............................. 31
BZ-2R-A2 .............................. 31
BZ-2RD-A2 ............................ 31
BZ-2RDS-A2 .......................... 31
BZ-2RDS-A2S ........................ 31
BZ-2RQ181-A2 ...................... 32
BZ-2RQ18-A2 ........................ 31
BZ-2RQ1-A2 .......................... 31
BZ-2RW80-A2 ....................... 32
BZ-2RW822 ........................... 32
BZ-2RW8225551-A2 ............. 32
BZ-2RW822-A2 ..................... 32
BZ-2RW826-A2 ..................... 32
BZ-2RW82-A2 ....................... 32
BZ-2RW84-A2 ....................... 32
BZ-2RW863-A2 ..................... 32
BZ-R ...................................... 31
BZ-R169 ................................ 31
BZ-R-A2 ................................ 31
CPCL04DFC ............................. 5
CPCL04GFC ............................. 5
CPCL10DF ............................... 5
CPCL10DFC ............................. 5
CPXL04DF ............................... 5
CSDA1BC .............................. 29
CSLA1CD ............................... 29
CSLA1CF ............................... 29
CSLA1CH ............................... 29
CSLA1DE ............................... 28
CSLA1DJ ............................... 28
CSLA1DK ............................... 28
CSLA1EL ............................... 29
CSLA1GD .............................. 29
CSLA2CD ............................... 29
CSLA2DE ............................... 28
CSLA2DG .............................. 28
CSLA2DJ ............................... 28
CSLA2DK ............................... 28
CSLA2EJ ................................ 29
CSLA2EL ............................... 29
CSLA2EM .............................. 29
CSLA2EN ............................... 29
CSLA2GD .............................. 29
CSLH3A45 ............................. 29
CSNA111 ............................... 27
CSNB121 ............................... 27
CSNB131 ............................... 27
CSNC241-500 ....................... 27
CSNE151 ............................... 26
CSNE151-100 ........................ 26
CSNE151-200 ........................ 26
CSNF151 ............................... 27
CSNF161 ............................... 27
CSNF161-002 ........................ 27
CSNG251 ............................... 27
CSNJ481 ............................... 28
CSNJ481-001 ........................ 28
CSNK591 ............................... 28
CSNK591-001 ....................... 28
CSNP661 ............................... 27
CSNP661-002 ....................... 27
CSNR151 ............................... 27
CSNR151-002 ....................... 27
CSNR161 ............................... 27
CSNR161-002 ....................... 27
CSNT651 ............................... 27
CSNT651-001 ........................ 27
DC001NDC4 ............................ 6
DC005NDR4 ............................ 6
DCXL01DN .............................. 6
DCXL10DN .............................. 6
DT-2R-A7 .............................. 32
DUXL01D ................................ 6
DUXL10D ................................ 6
FSG15N1A ............................. 12
FSL05N2C ............................. 12
HEL-700-T-0-A ...................... 14
HEL-700-T-0-B ...................... 14
HEL-700-T-1-A ...................... 14
HEL-700-T-1-B ...................... 14
HEL-700-U-0-A ...................... 14
HEL-700-U-0-B ...................... 14
HEL-700-U-0-C ...................... 14
HEL-700-U-1-A ...................... 14
HEL-700-U-1-B ...................... 14
HEL-700-U-1-C ...................... 14
HEL-705-T-0-12-00 ............... 15
HEL-705-T-1-12-00 ............... 15
HEL-705-U-0-12-00 .............. 15
HEL-705-U-1-12-00 .............. 15
HEL-707-T-0-12-00 ............... 15
HEL-707-T-1-12-00 ............... 15
HEL-707-U-0-12-00 .............. 15
HEL-707-U-1-12-00 .............. 15
HEL-711-T-0-12-00 ............... 15
HEL-711-T-1-12-00 ............... 15
HEL-711-U-0-12-00 .............. 15
HEL-711-U-1-12-00 .............. 15
HEL-712-T-0-12-00 ............... 15
HEL-712-T-1-12-00 ............... 15
HEL-712-U-0-12-00 .............. 15
HEL-712-U-1-12-00 .............. 15
HEL-716-T-0-12-00 ............... 15
HEL-716-T-1-12-00 ............... 15
HEL-716-U-0-12-00 .............. 15
HEL-716-U-1-12-00 .............. 15
HEL-716-U-1-12-C2 .............. 15
HEL-717-T-0-12-00 ............... 15
38 www.honeywell.com/sensing
INDEX
HEL-717-T-1-12-00 ............... 15
HEL-717-U-0-12-00 .............. 15
HEL-717-U-1-12-00 .............. 15
HIH-3602-A ........................... 13
HIH-3602-C ........................... 13
HIH-3602-L ........................... 13
HIH-3610-001 ....................... 13
HIH-3610-002 ....................... 13
HIH-3610-003 ....................... 13
HIH-3610-004 ....................... 13
HLC1395-002 ........................ 23
HLC2705-001 ........................ 22
HOA0149-001 ....................... 23
HOA0866-T55 ....................... 24
HOA0870-N51 ....................... 24
HOA0880-P51 ....................... 24
HOA0890-L55 ....................... 24
HOA0901-011 ....................... 22
HOA0902-011 ....................... 22
HOA0961-N51 ....................... 25
HOA0971-N51 ....................... 25
HOA1180-002 ....................... 23
HOA1397-002 ....................... 23
HOA1405-002 ....................... 23
HOA1870-031 ....................... 24
HOA1877-001 ....................... 24
HOA1879-015 ....................... 24
HOA1882-012 ....................... 24
HOA2498-002 ....................... 23
HOA6963-N51 ....................... 25
HOA6972-N55 ....................... 25
HOA6981-L51 ....................... 25
HOA6990-T51 ....................... 25
HOA7720-M22 ...................... 25
HOA7730-M22 ...................... 25
LL102101 .............................. 30
LL103000 .............................. 30
LL103101 .............................. 30
LL105100 .............................. 30
LLE102000 ............................ 30
LLE105000 ............................ 30
SD1440-003L ........................ 21
SD2440-004 .......................... 21
SD3443-003 .......................... 21
SD5443-003 .......................... 21
SD5600-001 .......................... 22
SD5610-001 .......................... 22
SD5620-001 .......................... 22
SD5630-001 .......................... 22
SDP8405-003 ........................ 21
SDP8406-002 ........................ 21
SDP8436-003 ........................ 21
SDP8600-001 ........................ 22
SE1450-003L ........................ 20
SE1470-003L ........................ 20
SE2460-003 .......................... 20
SE2470-002 .......................... 20
SE3455-004 .......................... 20
SE3470-003 .......................... 20
SE5455-003 .......................... 20
SE5470-004 .......................... 20
SEP8505-003 ........................ 20
SEP8506-002 ........................ 20
SEP8705-003 ........................ 20
SEP8736-003 ........................ 20
SMD2440-012 ....................... 21
SME2470-021 ....................... 20
SR13C-A1.............................. 18
SR13D-A1 ............................. 18
SR13F-A1 .............................. 18
SR13R-A1 ............................. 18
SR16C-J4 .............................. 18
SR16C-J6 .............................. 18
SR16C-N ............................... 18
SR17C-J6 .............................. 19
SR17C-J7 .............................. 19
SS41...................................... 16
SS411A ................................. 16
SS413A ................................. 16
SS441A ................................. 16
SS443A ................................. 16
SS449A ................................. 16
SS461A ................................. 16
SS466A ................................. 16
SS49...................................... 17
SS495A ................................. 16
SS495A1 ............................... 16
SS495A1-S ............................ 16
SS495A-SP ........................... 16
SS495B ................................. 17
SS496B ................................. 17
SS511AT ............................... 17
SS513AT ............................... 17
SS51T ................................... 17
SS541AT ............................... 17
SS543AT ............................... 17
SS549AT ............................... 17
SS561AT ............................... 17
SS566AT ............................... 17
SS94A1 ................................. 17
SS94A1F................................ 17
SS94A2 ................................. 17
SX3-T .................................... 33
TD4A ..................................... 15
TD5A ..................................... 15
V5A010CB ............................. 34
V5A010CB4E ......................... 34
V5B010CB3 ........................... 34
V5B010FB3 ........................... 34
V5B010TB ............................. 34
V5B210CB ............................. 34
V5B210CB1C ......................... 34
V5B210CB1E ......................... 34
V5B210CB3D......................... 34
V5C010BB ............................. 34
V5C010BB1G......................... 34
V5C010BB3B ......................... 34
V5C010BB3D......................... 34
V5C010EB3 ........................... 34
V5C010TB3 ........................... 34
V5D030BB ............................. 34
V5P010CB ............................. 34
V5R030CB ............................. 34
V5S020CB ............................. 34
V5S030CB ............................. 34
V7-1A17D8 ............................ 35
V7-1A17D8-022 .................... 36
V7-1A17P02 .......................... 35
V7-1B10E9-207 ..................... 36
V7-1B17D8 ............................ 35
V7-1B17D8-048 .................... 36
V7-1B17D8-263 .................... 36
V7-1B19D8-022 .................... 36
V7-1B19E9 ............................ 35
V7-1C17D8 ............................ 35
V7-1C17D8-002 .................... 35
V7-1C17D8-022 .................... 36
V7-1C17D8-048 .................... 36
V7-1C17D8-201 .................... 36
V7-1C17D8-207 .................... 36
V7-1C17D8-263 .................... 36
V7-1C17E9 ............................ 35
V7-1C17E9-002 ..................... 35
V7-1C17E9-201 ..................... 36
V7-1C17E9-207 ..................... 36
V7-1C18E9 ............................ 35
V7-1C18E9-022 ..................... 36
V7-1D10D8 ............................ 35
V7-1E10D8 ............................ 35
V7-1E17P02 .......................... 35
V7-1E19E9 ............................ 35
V7-1S17D8 ............................ 35
V7-1S17D8-022 .................... 36
V7-1S17D8-201 .................... 36
V7-1S17D8-207 .................... 36
V7-1S17D8-263 .................... 36
V7-1V19E9 ............................ 35
V7-1V19E9-048 ..................... 36
V7-1V19E9-207 ..................... 36
V7-1Z19E9 ............................ 35
V7-2A17D8-022 .................... 36
V7-2A17D8-207 .................... 36
V7-2A17E9 ............................ 35
V7-2B17D8 ............................ 35
V7-2B17D8-022 .................... 36
V7-2B17D8-048 .................... 36
V7-2B17D8-201 .................... 36
V7-2B17D8-207 .................... 36
V7-2B17E9 ............................ 35
V7-2B17E9-002 ..................... 35
V7-2B17P02 .......................... 35
V7-2B19E9-048 ..................... 36
V7-2S17D8 ............................ 35
V7-2S17D8-022 .................... 36
V7-2S17D8-201 .................... 36
V7-2S17D8-263 .................... 36
V7-3A17D8 ............................ 35
V7-3E10E8 ............................ 35
V7-3E10E9 ............................ 35
V7-3E17D8 ............................ 35
V7-3E17E9 ............................ 35
V7-3E17E9-022 ..................... 36
V7-3E19E9 ............................ 35
V7-3S17D8-022 .................... 36
V7-3S17D8-048 .................... 36
V7-3S17E9 ............................ 35
V7-3S17E9-022 ..................... 36
V7-3S17E9-263 ..................... 36
V7-4A17D8 ............................ 35
V7-4A18E9 ............................ 35
V7-4S17D8 ............................ 35
V7-5D17E9 ............................ 35
V7-6B19D8 ............................ 35
V7-6C17D8 ............................ 35
V7-6C17D8-263 .................... 36
V7-6C18D8-002 .................... 35
V7-6C18D8-048 .................... 36
V7-7A19D8 ............................ 35
V7-7B17D8-201 .................... 36
V7-7B19D8-263 .................... 36
V7-7D17D8-207 .................... 36
V7-9W1AE9-048 ................... 36
XCA415AN ............................... 7
XCX01DNC .............................. 7
XCX01DNH .............................. 7
XCX15DNC .............................. 7
XPC01DFC ............................... 7
XPC15DTC ............................... 7
XSXL04GF ............................... 8
Inside back
cover - blank
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of defective
material and faulty workmanship. Contact your local sales office for warranty
information. If warranted goods are returned to Honeywell during that period
of coverage, Honeywell will repair or replace without charge those items it
finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of merchantability
and fitness for a particular purpose.
While we provide application assistance, personally, through our literature
and the Honeywell web site, it is up to the customer to determine the suitability
of the product in the application.
Specifications may change at any time without notice. The information
we supply is believed to be accurate and reliable as of this printing. However,
we assume no responsibility for its use.
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the
customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on
request. © Honeywell 2002. All rights reserved.
Honeywell Automation & Control Products
Newhouse Industrial Estate
Motherwell ML1 5SB
Scotland, UK
www.honeywell.com/sensing
100455-EN Issue 1 09/02 UK07 GLO Printed in the United Kingdom on environmentally friendly paper
Sales and Service
Honeywell serves its customers through a worldwide network of sales offices
and distributors. For application assistance, current specifications, pricing or
name of the nearest Authorised Distributor, contact your local sales office or:
INTERNET: www.honeywell.com/sensing
E-mail: info.sc@honeywell.com
ASIA PACIFIC
Control Products
Asia Pacific Headquarters
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Australia
Honeywell Limited
Phone: +(61) 2-9370-4500
FAX: +(61) 2-9370-4525
Toll Free 1300-36-39-36
Toll Free Fax: 1300-36-04-70
China – PRC - Beijing
Honeywell China Inc.
Phone: +(86-10) 8458-3280
Fax: +(86-10) 8458-3102
China – PRC - Shanghai
Honeywell China Inc.
Phone: (86-21) 6237-0237
Fax: (86-21) 6237-1237
China - Hong Kong S.A.R.
Honeywell Ltd.
Phone: +(852) 2953-6412
Fax: +(852) 2953-6767
Indonesia
Honeywell Indonesia Pte Ltd.
Phone: +(62) 21-535-8833
FAX: +(62) 21-5367 1008
India
TATA Honeywell Ltd.
Phone: +(91) 20 6870 445/
446
Fax: +(91) 20 681 2243/ 687
5992
Japan
Honeywell Inc
Phone: +(81) 3 5440 1425
Fax: +(81) 3 5440 1368
South Korea
Honeywell Korea Co Ltd
Phone: +(822) 799-6167
Fax: +(822) 792-9013
Malaysia
Honeywell Engineering Sdn
Bhd
Phone: +(60-3) 7958-4988
Fax: +(60-3) 7958-8922
New Zealand
Honeywell Limited
Phone: +(64-9) 623-5050
Fax: +(64-9) 623-5060
Toll Free (0800) 202-088
Philippines
Honeywell Systems
(Philippines) Inc.
Phone: +(63-2) 636-1661 /
1662
Fax: +(63-2) 638-4013
Singapore
Honeywell South East Asia
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Thailand
Honeywell Systems (Thailand)
Ltd.
Phone: +(662) 693-3099
FAX: +(662) 693-3085
Taiwan R.O.C.
Honeywell Taiwan Ltd.
Phone: +(886-2) 2245-1000
FAX: +(886-2) 2245-3242
EUROPE
Austria
Honeywell Austria GmbH
Phone: +(43) 1 727 80 366/
246
FAX: +(43) 1 727 80 337
Belgium
Honeywell SA/NV
Phone: +(32) 2 728 2522
FAX: +(32) 2 728 2502
Bulgaria
Honeywell EOOD
Phone: +(359) 2 79 40 27
FAX: +(359) 2 79 40 90
Czech Republic
Honeywell spol. s.r.o.
Phone: +(420) 2 6112 3469/
3424
FAX: +(420) 2 6112 3461
Denmark
Honeywell A/S
Phone: +(45) 39 55 55 55
FAX: +(45) 39 55 55 58
Finland
Honeywell OY
Phone: +(358) 9 3480101
FAX: +(358) 9 34801375
France
Honeywell SA
Phone: +(33) 1 60 19 80 40
FAX: +(33) 1 60 19 81 73
Germany
Honeywell AG
Phone: +(49) 69 8064 444
FAX: +(49) 69 8064 442
Hungary
Honeywell Kft.
Phone: +(36 1) 451 4300
FAX: +(36 1) 451 4343
Italy
Honeywell S.p.A.
Phone: +(39) 02 92146 450/
456
FAX: +(39) 02 92146 490
The Netherlands
Honeywell B.V.
Phone: +(31) 20 565 69 11
FAX: +(31) 20 565 66 00
Norway
Honeywell A/S
Phone: +(47) 66 76 20 00
FAX: +(47) 66 76 20 90
Poland
Honeywell Sp. zo.o
Phone: +(48) 22 606 0900
FAX: +(48) 22 606 0901
Portugal
Honeywell Portugal Lda
Phone: +(351 21) 424 50 00
FAX: +(351 21) 424 50 99
Romania
Honeywell Bucharest
Phone: +(40) 1 2110076
FAX: +(40) 1 2103375
Commonwealth of
Independent States (CIS)
Z.A.O. Honeywell
Phone: +(7 095) 796 98 36
FAX: +(7 095) 796 98 93
Slovak Republic
Honeywell s.r.o.
Phone: +(421 7) 58247 403/
400
FAX: +(421 7) 58247 415
South Africa (Republic of)
Honeywell Southern Africa
Honeywell S.A. Pty. Ltd
Phone: +(27) 11 805 1201
FAX +(27) 11 805 1504
Spain
Honeywell S.A.
Phone: +(34) 91 313 6100
FAX: +(34) 91 313 6129
Sweden
Honeywell AB
Phone: +(46) 8 775 55 00
FAX: +(46) 8 775 56 00
Switzerland
Honeywell AG
Phone: +(41) 1 855 24 40
FAX: +(41) 1 855 24 45
Turkey
Honeywell Turkey A.S.
Phone: +(90) 216 5756620
FAX: +(90) 216 5756637
United Kingdom
Honeywell Control Systems Ltd
Phone: +(44) 1698 481481
FAX: +(44) 1698 481276
Mediterranean & African
Distributors
Honeywell SpA
Phone: +(39) 2 921 46 232
FAX: +(39) 2 921 46 233
Middle East Headquarters
Honeywell Middle East Ltd.
Phone: +(9712) 443 2119
FAX +(9712) 443 2536
NORTH AMERICA
Canada
Honeywell LTD
Phone: 1-800-737-3360
FAX: 1-800-565-4130
USA
Honeywell
Control Products,
International Headquarters
Phone: 1-800-537-6945
1-815-235-6847
FAX: 1-815-235-6545
E-mail:
info.sc@honeywell.com
LATIN AMERICA
Argentina
Honeywell S.A.I.C.
Phone: +(54-11) 4383-3637
FAX: +(54-11) 4325-6470
Brazil
Honeywell do Brasil & Cia
Phone: +(55-11) 7266-1900
FAX: +(55-11) 7266-1905
Chile
Honeywell Chile, S.A.
Phone: +(56-2) 233-0688
FAX: +(56-2) 231-6679
Columbia
Honeywell Columbia, S.A.
Phone: +(57-1) 623-3239/
3051
FAX: +(57-1) 623-3395
Ecuador
Honeywell S.A.
Phone: +(593-2) 981-560/1
FAX: +(593-2) 981-562
Mexico
Honeywell S.A. de C.V.
Phone: +(52) 55 5259-1966
FAX: +(52) 55 5570-2985
Puerto Rico
Honeywell Inc.
Phone: +(809) 792-7075
FAX: +(809) 792-0053
Venezuela
Honeywell CA
Phone: +(58-2) 238-0211
FAX: +(58-2) 238-3391