PG-35-103R-NR2 - COPAL - Product.Network

■

Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.

COPAL ELEC

NIC

Oct,

2005

■MODEL NUMBER DESIGNATION

P G - 3 5 - 1 0 2 R - N R 2 B

Series name

Pressure range

102R : −100 ~ 100 kPa (Compound pressure [Negative pressure ~ Positive pressure])

102A : 0 ~ 100 kPa (Absolute pressure [Absolute vacuum ~ Barometic pressure])

103R : −100 ~ 1000 kPa (Compound pressure [Negative pressure ~ Positive pressure])

Pressure reference

R : Compound pressure (Negative pressure ~ Positive pressure)

A : Absolute pressure (Absolute vacuum ~ Barometic pressure)

Fitting

R2 : R 1/4 (With M5 female screw)

GF : G 3/8 (Flush diaphragm type)

G2 : G 1/4 (With M5 female screw)

VC : 9/16-18UNF (Gusket joint)

Port

Blank : Stem mount

B : Back mount

Switch output interface

N : NPN open collector

P : PNP open collector

High corrosion resistance type

PG-35

PRESSURE GAUGES

● Both absolute pressure type and compound pres-

sure type are available

Compound pressure type measures negative and positive gauge

pressure.

● Compact and lightweight general-purpose pressure

gauges

Innovative general-purpose gauges of compact design (30mm sq.)

and drip-proof structure (IP-65).

● Clear indication by LED

Easy-to-see LED assures clear readings on the panel and even in

a dark place.

● Various modes and units can be selected according

to applications

Eight different pressure units

Three analog output modes

Eight switch output modes

● Meet EMC standards

EN 55011 (EMI)

EN 61326-1 (EMS)

● Low consumption by nondisplay mode

■FEATURES 1

Part name Material

Sensor module

Adaptor

FPC

Case

Panel sheet

“O” ring

Sensor holder

Fitting

SUS316L

Aluminum Die-casting

Polyimide

PBT (Polybutyleneterphthalate)

Polyester

NBR

SUS316L

INTERNAL STRUCTURE

marking

Compatible with

EMC directive

■

Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.

COPAL ELEC

NIC

Oct,

2005

Applicable model

PG-35

PRESSURE GAUGES

■LIST OF MODEL NUMBERS

■ACCESSORIES (Sold separately)

Pressure medium Fitting Port

Switch output

interface Rated pressure range

Pressure reference

−100 ~ 100 kPa −100 ~ 1000 kPa 0 ~ 100 kPa abs

Gauge Absolute

PG-35-102R-NR2 PG-35-103R-NR2 PG-35-102A-NR2

A PG-35-102R-NR2B A PG-35-103R-NR2B A PG-35-102A-NR2B

PG-35-102R-PR2 PG-35-103R-PR2 PG-35-102A-PR2

A PG-35-102R-PR2B A PG-35-103R-PR2B A PG-35-102A-PR2B

PG-35-102R-NGF PG-35-103R-NGF PG-35-102A-NGF

PG-35-102R-PGF PG-35-103R-PGF PG-35-102A-PGF

PG-35-102R-NVC PG-35-103R-NVC PG-35-102A-NVC

A PG-35-102R-NVCB A PG-35-103R-NVCB A PG-35-102A-NVCB

PG-35-102R-PVC PG-35-103R-PVC PG-35-102A-PVC

A PG-35-102R-PVCB A PG-35-103R-PVCB A PG-35-102A-PVCB

PG-35-102R-NG2 PG-35-103R-NG2 PG-35-102A-NG2

PG-35-102R-PG2 PG-35-103R-PG2 PG-35-102A-PG2

R 1/4

G 3/8

9/16-18UNF

G 1/4

Stem mount

Back mount

Stem mount

Back mount

Stem mount

Back mount

Stem mount

Back mount

Stem mount

NPN

PNP

NPN

PNP

NPN

PNP

NPN

PNP

Corrosive gases/

liquids compatible with

SUS 316L

Name

Series name

Contents

Panel holder cover

Panel holder

Panel stopper (2pcs.)

PG-30 · PG-35 ·

PG-35H · PG-35L

PG-30 · PG-35 ·

PG-35H · PG-35L

Panel holder cover

Panel holder

ACPG-003

ACPG-004

Panel holder set

Holder cover set

(For protecting gauge operating panel)

❈: Verify the above model numbers when placing orders.

❈1 : Change in the pressure indication, switch operating points and analog output.

■ENVIRONMENTAL CHARACTERISTICS

Test item Test conditions Permissible change

±2 %F.S. maximum after test ❈1

(Amount of analog output fluctuation is per-

mitted by adding conversion error of 20 mV.)

Vibration

10~500 Hz, 98.1 m/s

or 1.5 mm P-P, 3 directions for 2 hours each

490 m/s

, 3 directions for 3 times each

0 ~ Rated pressure

、

106cycles

40 °C, 90 ~ 95 %RH, 240 hrs.

EMI : EN 55011 Group 1, class B (1998)

EMS : EN 61326-1 (1997) ±5 %F.S. maximum during test ❈1

Shock

Pressure cycling

Moisture resistance

EMC

The products marked A are manufactured upon receipt of order basis.

■

Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.

COPAL ELEC

NIC

Oct,

2005

PG-35

PRESSURE GAUGES

General specificationsDisplay

Switch output

Analog output

Item Model number PG-35

102R 103R 102A

■STANDARD SPECIFICATIONS

Pressure reference Gauge Absolute

Corrosive gases/liquids compatible with SUS 316L

−100 ~ 100 −100 ~ 1000 0 ~ 100

200 2000 200

300 3000 300

−10 ~ 50

0 ~ 50

35 ~ 85

In accordance with IEC IP-65

Stem mount, Back mount

SUS 316L

Approx. 150 (Including 2 m cable)

±3 %F.S. (0 ~ 50 °C)

100 MΩminimum (DC500 V)

AC500 V 1 minute (Leakage current 1 mA maximum)

10.8 ~ 30 V DC (Including ripple percentage)

50 mA maximum

Full 3-digit LED

−99.9 ~ 99.9 −100 ~ 999 0.0 ~ 99.9

Max. 11 settings

Red LED is ON. ————

±1 %

2-point output (Transistor, Open collector output)

Separate mode / window comparator mode

30 V DC 100 mA Short-circuit protection

1.2 V maximum (NPN), 2.2 V maximum (PNP) (At load current of 100 mA)

Output 1 (Green LED), Output 2 (Red LED) Lighted when output is ON.

0 ~ 300 counts

Adjustable

±0.2 %F.S. ±1 count (±0.3 %F.S. maximum)

Approx. 5, 25, 250, 2500 ms Adjustable

3 modes

10 kΩ

1/204

“O” rings are supplied (G 3/8 : P18, G 1/4 : P15)

1〜5 V G/V mode ZERO : 1 ±0.2 V, SPAN : 4 ±0.2 V

R mode ZERO : 3 ±0.2 V, SPAN : 2 ±0.2 V

103 R (R mode) ZERO : 1.36 ±0.2 V

SPAN : 3.64 ±0.2 V

NPN/PNP

Pressure medium

Rated pressure range

Maximum pressure kPa

kPa

Break-down pressure

Operating temp. range

Compensated temp. range

Operating humidity

Protection grade

Type of mounting

Material of pressure port attachment

Net weight g

Thermal error

Insulation resistance

Dielectric strength

Input voltage

Consumption current

Display element

Rated display range kPa

Multiplier settings

Negative pressure display

Display accuracy

Output status

Output mode

Switching capacity

Residual voltage

State indication

Switch

hysteresis

Repeatability

Response

Approx. 5, 25, 250, 2500 ms Adjustable

Response

Output mode

Output voltage

Impedance

Resolution

Accessories

()

kPa

°C

%RH

°C

● Unless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation voltage of 12 V DC.

■

Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.

COPAL ELEC

NIC

Oct,

2005

PG-35

PRESSURE GAUGES

Display multiplier

Selection code

1× 1

×0.0102

×10.2

×7.501

×102

×0.01

×10

×0.145

0.000145

×0.001

×0.2953

Pressure range

The last digit/letter represents the selection code : Blinking red LED indicates negative pressure.

102R 103R 102A

– 99.9 ~ 99.9 – 100 ~ 999 0.0 ~ 99.9 (abs)

– 1.02 ~ 9.99

– 999 ~ 999 0 ~ 999 (abs)

– 750 ~ 750 0 ~ 750 (abs)

– 1.00 ~ 9.99

– 999 ~ 999 0 ~ 999 (abs)

– 14.5 ~ 14.5 – 14 ~ 145 0.0 ~ 14.5 (abs)

– 0.10 ~ 1.00

– 29.5 ~ 29.5 – 29 ~ 295 0.0 ~ 29.5 (abs)

1R mode

2G mode

3V mode

Display

■INTERNAL ELECTRICAL SCHEMATICS

SELECTION OF DISPLAY MULTIPLIER

ANALOG OUTPUT MODE

SWITCH OUTPUT MODE

Output

Mode

Operation

Pressure setting

(Operating point)

Setting1 Setting2

(Lowerlimit):Setting1

(Upperlimit):Setting2

(Lowerlimit):Setting1

(Upperlimit):Setting2

SW1 SW2 Separate mode Window comparator mode

Separate

Windowcomparator

Separate

Windowcomparator

HI LO A B HI LO A B

(HI operation)

(LO operation)

(A operation)

(B operation)

P1: SW1 P2: SW2 P1 P2

P1 P2

OFF

ON ON

-Pr

OFF OFF

OFF

Pr -Pr Pr

-Pr Pr

H H

P1: SW1 P2: SW2 OFF

-Pr Pr

H:Switch hysteresis,

P1=Setting 1, P2=Setting 2

P1≦P2 or P1≧P2 P1≦P2–2H

Diagonal column: Display multiplier cannot

be selected due to resolution and number

of digits. (Selection code is not indicated

either.) Selection code is set at “1” prior to

shipment.

When shipped from our factory : 102R : V mode is

set at “3” and 102R, 103R : G mode is set at

“2”. In case of 102R and 103R, R/G/V mode can

be set at “1”, “2” or “3” (However, the accuracy at

V mode of 103R can’t be guaranteed). 102A :

Only G mode can be set.

Note 1. In the Separate Mode, setting 1 corresponds to SW1, and

Setting 2 corresponds to SW2.

Note 2. In the Window Comparator Mode, the minimum value for

SW1 and SW2 corresponds to Setting 1 and the maximum

value corresponds to Setting 2.

Pressure range

1 V 5 V

5 V 1 V

−Pr 0 Pr

A.Output

Load

S.Output1

Main circuit

Power B

Sensor

Common C

S.Output2

Load

2Indicator

LED

Pressure indication

Pressure

A.Output

Pressure indication

Sensor

S.Output1

S.Output2

Load

Pressure

Power B

1 2

LED

Common C

Load

Indicator

Main circuit

● NPN ● PNP

■

Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.

COPAL ELEC

NIC

Oct,

2005

PG-35

PRESSURE GAUGES

■OUTLINE DIMENSIONS Unless otherwise specified tolerance : ±0.5 (Unit: mm)

(66.2)

COPAL ELECTRONICS

10.5

R 1/4 (PT 1/4)

(With M5 female screw)

5-core shielded cable

L = 2000 ± 100

AWG26

UL No.2844

Configurations of joint R2 type

167.7

( 3.8)

2 – M 4

Depth 5

Vent hole

(68.7)

(65.7)

(63.8)

G 1/4 (PF 1/4)

G 3/8 (PF 3/8)9/16-18 UNF (With M 5 female screw)

COPAL ELECTRONICS COPAL ELECTRONICS COPAL ELECTRONICS

Configurations of joint VC type Configurations of joint GF type Configurations of joint G2 type

● PG-35

Wire color

Brown

Gray

Black

White

Blue

Shield

Connection

Power B

Analog output

Switch output 1

Switch output 2

Common

Housing

■

Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.

COPAL ELEC

NIC

Oct,

2005

PG-35

PRESSURE GAUGES

■OUTLINE DIMENSIONS Unless otherwise specified tolerance : ±0.5 (Unit: mm)

● PG-35-B (R2)

● PG-35-B (VC)

□31.4

(65)

□30

5.5

R1/4 : SUS316L

M5 (P0.8)

Depth 6

AWG26 UL No.2844

L = 2000 ± 100

Vent hole

5-core shielded cable ( 3.8)

□31.4

(67.5)

□30

Vent hole 5.5

9/16-18UNF

SUS316L

AWG26 UL No.2844

L = 2000 ± 100

5-core shielded cable ( 3.8)