Data sheet| Item number:2091-1123
1-conductor female plug; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; 1,50 mm²;
light gray
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /1 8
L = (pole no. – 1) x pin spacing
iPicture differs from the item.
Color:
Item description
Universal connection of all conductor types
Simple, push-in termination of solid and ferruled conductors
Easy-to-use design does not require special tools
Ability to wire while mated or unmated
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /2 8
Ability to wire while mated or unmated
Testing parallel to conductor entry – tip contact
Also available with gripping plates
Integrated locking latches prevent accidental disconnection
Safety information 1:
The includes connectors without breaking capacity in accordance with DIN EN 61984. When used as picoMAX® Pluggable Connection System
intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can
be touched, are not live when unmated.
Data
Electrical data
Ratings per IEC/EN 60664-1
Ratings per IEC/EN 60664-1
Nominal voltage (III/3) 160 V
Rated surge voltage (III/3) 2.5 kV
Rated voltage (III/2) 160 V
Rated surge voltage (III/2) 2.5 kV
Nominal voltage (II/2) 320 V
Rated surge voltage (II/2) 2.5 kV
Rated current 10 A
Legend (ratings) (III / 2) ≙ Overvoltage category III / Pollution degree 2
Ratings per UL 1059
Approvals per UL 1059
Rated voltage UL (Use Group B) 300 V
Rated current UL (Use Group B) 10 A
Rated voltage UL (Use Group D) 300 V
Rated current UL (Use Group D) 10 A
Ratings per CSA
Approvals per CSA
Connection data
Connection technology Push-in CAGE CLAMP®
Actuation type Push-button
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /3 8
Actuation type Push-button
Solid conductor 0.2 … 1.5mm²/ 24 … 14AWG
Fine-stranded conductor 0.2 … 1.5mm²/ 24 … 14AWG
Fine-stranded conductor; with insulated ferrule 0.25 … 0.75mm²
Fine-stranded conductor; with uninsulated ferrule 0.25 … 1.5mm²
Strip length 8 … 9mm/ 0.31 … 0.35inch
Pole No. 3
Total number of connection points 3
Total number of potentials 3
Number of connection types 1
Number of levels 1
Physical data
Pin spacing 3.5mm/ 0.138inch
Width 10.5mm/ 0.413inch
Height 14mm/ 0.551inch
Depth 11.4mm/ 0.449inch
Plug-in connection
Contact type (pluggable connector) Female connector/socket
Connector (connection type) for conductor
Mismating protection No
Material Data
Color light gray
Material group I
Insulation material Polyphthalamide (PPA GF)
Flammability class per UL94 V0
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated
Fire load 0.034 MJ
Weight 1.4 g
Environmental Requirements
Limit temperature range -60 … +100°C
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /4 8
Commercial data
Product Group 26 (picoMAX)
Packaging type BOX
Country of origin DE
GTIN 4050821160762
Customs tariff number 85366990990
Approvals / Certificates
Country specific Approvals
Logo Approval Additional Approval Text
Certificate
name
CB
DEKRA Certification B.V.
IEC 61984 NL-49736
/A1
CSA
DEKRA Certification B.V.
C22.2 2362521
KEMA/KEUR
DEKRA Certification B.V.
EN 61984 71-
102260
REV.1
UL-Approvals
Logo Approval Additional Approval Text
Certificate
name
UL
Underwriters Laboratories Inc.
UL 1977 20190909-
E45171
UR
Underwriters Laboratories Inc.
UL 1059 E45172-
20100415
Counterpart
Item no.2091-1403
THT male header; 1.0 mm Ø solder pin; straight; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1403
Item no.2091-1403/005-000
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /5 8
Item no.2091-1403/005-000
THT male header; 1.0 mm Ø solder pin; straight; clamping collar; Pin spacing 3.5 mm; 3-pole; light
gray
www.wago.com/2091-1403
/005-000
Item no.2091-1403/200-000
THR male header; 1.0 mm Ø solder pin; straight; Pin spacing 3.5 mm; 3-pole; light gray
www.wago.com/2091-1403
/200-000
Item no.2091-1403/205-000
THR male header; 1.0 mm Ø solder pin; straight; clamping collar; Pin spacing 3.5 mm; 3-pole; light
gray
www.wago.com/2091-1403
/205-000
Item no.2091-1423
THT male header; 1.0 mm Ø solder pin; angled; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1423
Item no.2091-1423/200-000/997-406
THR male header; 1.0 mm Ø solder pin; angled; in tape-and-reel packaging; Pin spacing 3.5 mm; 3-
pole; light gray
www.wago.com/2091-1423
/200-000/997-406
Item no.2091-1423/200-000
THR male header; 1.0 mm Ø solder pin; angled; Pin spacing 3.5 mm; 3-pole; light gray
www.wago.com/2091-1423
/200-000
Item no.2091-1423/205-000
THR male header; 1.0 mm Ø solder pin; angled; clamping collar; Pin spacing 3.5 mm; 3-pole; light gray
www.wago.com/2091-1423
/205-000
Item no.2091-1423/005-000
THT male header; 1.0 mm Ø solder pin; angled; clamping collar; Pin spacing 3.5 mm; 3-pole; light gray
www.wago.com/2091-1423
/005-000
Item no.2091-1503/002-000
1-conductor male connector; Gripping plate; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; 1,50 mm²; light
gray
www.wago.com/2091-1503
/002-000
Item no.2091-1503/002-3000
1-conductor male connector; Gripping plate; direct marking; 1.5 mm²; Pin spacing 3.5 mm; 3-pole;
1,50 mm²; light gray
www.wago.com/2091-1503
/002-3000
Item no.2091-1523/002-000
1-conductor male connector; Integrated release lever; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; 1,50
mm²; light gray
www.wago.com/2091-1523
/002-000
Item no.2091-1523/002-3000
1-conductor male connector; Integrated release lever; direct marking; 1.5 mm²; Pin spacing 3.5 mm;
3-pole; 1,50 mm²; light gray
www.wago.com/2091-1523
/002-3000
Item no.2091-1523/020-3000
1-conductor male connector; Snap-in mounting feet; Integrated release lever; direct marking; 1.5
mm²; Pin spacing 3.5 mm; 3-pole; 1,50 mm²; light gray
www.wago.com/2091-1523
/020-3000
Item no.2091-1524/020-000
1-conductor male connector; Snap-in mounting feet; Integrated release lever; 1.5 mm²; Pin spacing www.wago.com/2091-1524
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /6 8
1-conductor male connector; Snap-in mounting feet; Integrated release lever; 1.5 mm²; Pin spacing
3.5 mm; 4-pole; 1,50 mm²; light gray
www.wago.com/2091-1524
/020-000
Item no.2091-1703
Solder pin strip; 1.0 mm Ø solder pin; straight; Pin spacing 3.5 mm; 3-pole; black www.wago.com/2091-1703
Item no.2091-1703/200-000
Solder pin strip; 1.0 mm Ø solder pin; straight; Pin spacing 3.5 mm; 3-pole; black
www.wago.com/2091-1703
/200-000
Item no.2091-1723
Solder pin strip; 1.0 mm Ø solder pin; angled; Pin spacing 3.5 mm; 3-pole; black www.wago.com/2091-1723
Item no.2091-1723/200-000
Solder pin strip; 1.0 mm Ø solder pin; angled; Pin spacing 3.5 mm; 3-pole; black
www.wago.com/2091-1723
/200-000
Compatible products
Coding
Item no.: 2091-1610
Coding key carrier; suitable for 3.5 mm pin spacing; orange www.wago.com/2091-1610
Strain relief plate
Item no.: 2091-1601
Gripping plate; light gray www.wago.com/2091-1601
Item no.: 2091-1601/002-000
Gripping plate with sliding connector release; light gray
www.wago.com/2091-1601
/002-000
check
Item no.: 735-500
Test pin; 1 mm Ø; with solder connection for test wire www.wago.com/735-500
tools
Item no.: 2092-1630
Unlocking tool; orange www.wago.com/2092-1630
Item no.: 210-719
Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft www.wago.com/210-719
Downloads
Documentation
Additional Information
Technical explanations Apr 3, 2019 pdf Download
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /7 8
Marking
Conductor termination
Inserting solid and ferruled conductors via
push-in termination
Inserting fine-stranded conductor into
unmated female connector via push-button.
Inserting fine-stranded conductor into
mated female connector via push-button.
Locking lever
Pull on both unlocking tool and conductors
to remove female connector from male
header.
Insert unlocking tool until it hits backstop.
Wedge opens locking latch.
Disconnecting female connector via
unlocking tool. Plug unlocking tool into the
male header’s locking latch.
Technical explanations Apr 3, 2019 pdf
3.6 MB
Download
CAD/CAE-Data
CAD data
2D/3D Models 2091-1123 URL Download
CAE data
ZUKEN Portal 2091-1123 URL Download
Installation Notes
Data sheet| Item number:2091-1123
www.wago.com/2091-1123
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
23.11.2020Page /8 8
Testing
Testing with 1 mm Ø test pin, tip contact.
Coding
Coding a female connector (via coding key
carrier and two keys for female connector,
see symbol).
Marking
Pole marking via factory direct printing.