SPEC NO: DSAE5929 REV NO: V.9B DATE: DEC/26/2012 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203002150
1.6x1.5mm BI-COLOR SMD CHIP LED LAMP
Part Number: APTB1615YSGC-F01
Yellow
Super Bright Green
Features
z1.6mmx1.5mm SMT LED, 0.7mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAE5929 REV NO: V.9B DATE: DEC/26/2012 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203002150
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTB1615YSGC-F01
Yellow (GaAsP/GaP)
Water Clear
3 8
Super Bright Green (GaP) 5 12
120°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow
Super Bright Green
590
565 nm IF=20mA
λD [1] Dominant Wavelength Yellow
Super Bright Green
588
568 nm IF=20mA
Δλ1/2 Spectral Line Half-width Yellow
Super Bright Green
35
30 nm IF=20mA
C Capacitance Yellow
Super Bright Green
20
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Yellow
Super Bright Green
2.1
2.2
2.5
2.5 V IF=20mA
IR Reverse Current Yellow
Super Bright Green 10
10 uA VR = 5V
Parameter Yellow Super Bright Green Units
Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 140 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAE5929 REV NO: V.9B DATE: DEC/26/2012 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203002150
APTB1615YSGC-F01
Yellow
SPEC NO: DSAE5929 REV NO: V.9B DATE: DEC/26/2012 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203002150
Super Bright Green
SPEC NO: DSAE5929 REV NO: V.9B DATE: DEC/26/2012 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203002150
APTB1615YSGC-F01
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAE5929 REV NO: V.9B DATE: DEC/26/2012 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203002150
PACKING & LABEL SPECIFICATIONS APTB1615YSGC-F01
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes