SPEC NO: DSAD2483 REV NO: V.5 DATE: OCT/26/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000227
101.6mm (4.0 INCH) 5x7 DOT MATRIX
DISPLAY
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
Description
The Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
TA40-11GWA GREEN
Features
4.0 INCH MATRIX HEIGHT.
DOT SIZE 10mm.
LOW CURRENT OPERATION.
HIGH CONTRAST AND LIGHT OUTPUT.
COMPATIBLE WITH ASCII AND EBCDIC CODES.
STACKABLE HORIZONTALLY.
COLUMN ANODE AVAILABLE.
EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
MULTICOLOR AVAILABLE.
MECHANICALLY RUGGED.
STANDARD : GRAY FACE, WHITE DOT.
RoHS COMPLIANT.
SPEC NO: DSAD2483 REV NO: V.5 DATE: OCT/26/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000227
Selection Guide
Part No. Dice Lens Type
Iv (ucd)
@ 10mA
Min. Typ.
TA40-11GWA GREEN (GaP) WHITE DIFFUSED 4700 24000 Column Anode
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Green 565 nm IF=20mA
λDDominant Wavelength Green 568 nm IF=20mA
∆λ1/2 Spectral Line Half-width Green 30 nm IF=20mA
CCapacitance
(Per Chip) Green 15 pF VF=0V;f=1MHz
VFForward Voltage
(Per Dot) Green 4.4 5.0 V IF=20mA
IRReverse Current
(Per Dot) Green 10 uA VR = 10V
Parameter Green Units
Power dissipation
(Per Dot) 125 mW
DC Forward Current
(Per Dot) 25 mA
Peak Forward Current [1]
(Per Dot) 140 mA
Reverse Voltage
(Per Dot) 10 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAD2483 REV NO: V.5 DATE: OCT/26/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000227
Green TA40-11GWA
SPEC NO: DSAD2483 REV NO: V.5 DATE: OCT/26/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000227
PACKING & LABEL SPECIFICATIONS TA40-11GWA
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
