DO NOT
SCALE FROM
THIS PRINT
.1200
REF
3.048
.0550 1.397
.0100
REF
0.254 .0060
REF
0.152
2
MAX TOE (TYP)
"A"
"A"
-LC: LOCKING CLIP OPTION SHOWN
LC-08-TM-01
C
.2450
REF
6.223
.2850 7.239
REF
.0200
REF
0.508
.1500
REF
3.810
(No OF POSITIONS x.0315[.80]) + .2075[5.27] REF
(No OF POSITIONS -1) x .0315[.80]
.1195
REF
3.035
.0283 0.718
BSE-XXX-01-D
C
01
02
BSE-XXX-01-X-D-XX
No OF POSITIONS
-020, -040, -060,
*-080, *-090, *-100, *-120
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE (USE BSE-XXX-01-D-X)
OPTION
-A: ALIGNMENT PINS
(USE BSE-XXX-01-D-A)
-LC: LOCKING CLIPS
(USE LC-08-TM-01)
-TR: TAPE & REEL (80 POS. MAX)
-FL: FRICTION LOCK (SEE FIG. 2)
(USE BSE-XXX-01-D-X-FL)
PLATING SPECIFICATION
-F: FLASH SELECTIVE GOLD WITH MATTE TIN TAILS (SEE NOTE 6 & 9)
-L: LIGHT SELECTIVE GOLD WITH MATTE TIN TAILS (SEE NOTE 9)
-H: HEAVY GOLD WITH MATTE TIN TAILS (SEE NOTE 9)
-C: ELECTRO-POLISHED SELECTIVE (SEE NOTE 9)
LEAD STYLE
-01: .1280 [3.25]
.070
REF
1.765
.006
REF
0.147
.0375 0.953
.2950
REF
7.493
.1280
-
.0010
+
.0030 3.251
-
0.03
+
0.08
(SEE NOTE 7)
SECTION "A"-"A"
C
C
C-126-21-X
(SEE NOTE 9)
SEE TABLE 1
(No OF POSITIONS X .0315[.80]) + .1625[4.13] REF
-A: ALIGNMENT PIN OPTION SHOWN
BSE-XXX-01-D-A
BTE-060-01-X-D-A SHOWN
.0350
REF
0.889
.0375
REF
0.953
.0375
REF
0.953
R
"B" "B"
-FL OPTION
BSE-020-01-X-D-A-FL SHOWN
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
FIG. 2
BSE-XXX-01-D-X-FL
.080
REF
2.03
+ .167[4.21] REF
(No OF POS X .0315[.80])
SECTION "B"-"B"
SCALE 2 : 1
TUBE: PT-1-24-03-78
PLUG: TP-09
PACKAGING VIEW
C
FIG. 1
BSE-060-01-X-D-LC SHOWN
* = SEE NOTE 8
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.25] 2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.8mm DOUBLE ROW SOCKET ASSEMBLY
BY:
BSE-XXX-01-X-D-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
05/24/1999
1
1
SHEET SCALE: 1.5:1
INSULATOR: BLACK LCP
FLAMMABILITY RATING: UL94VO
SOCKET:PHOS BRONZE
C:\EnterpriseVault\DWG\MISC\MKTG\BSE-XXX-01-X-D-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. MAXIMUM BURR ALLOWANCE: .0015 [.038].
4. MINIMUM PUSHOUT FORCE: .5 LB.
5. NOTE DELETED.
6. –L PLATING MAY BE SUBSTITUTED FOR –F PLATING.
7. MAX VARIENCE: .002 [.05]
8. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS,
PLEASE CONTACT SAMTEC INTERCONNECT PROCESSING
GROUP.
9. -90 THROUGH -120 POSITION PARTS USE C-269-11-X. DO
NOT SUB C-126-XX-X OR C-224-01-X.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION W
