REVISION W FIG. 1 BSE-XXX-01-X-D-XX BSE-060-01-X-D-LC SHOWN (No OF POSITIONS x.0315[.80]) + .2075[5.27] REF DO NOT SCALE FROM THIS PRINT C .1195 3.035 REF (No OF POSITIONS -1) x .0315[.80] 02 .2450 6.223 REF .1500 3.810 REF 01 BSE-XXX-01-D .0200 0.508 REF PLATING SPECIFICATION -F: FLASH SELECTIVE GOLD WITH MATTE TIN TAILS (SEE NOTE 6 & 9) -L: LIGHT SELECTIVE GOLD WITH MATTE TIN TAILS (SEE NOTE 9) -H: HEAVY GOLD WITH MATTE TIN TAILS (SEE NOTE 9) -C: ELECTRO-POLISHED SELECTIVE (SEE NOTE 9) * = SEE NOTE 8 .0283 0.718 "A" C OPTION -A: ALIGNMENT PINS (USE BSE-XXX-01-D-A) -LC: LOCKING CLIPS (USE LC-08-TM-01) -TR: TAPE & REEL (80 POS. MAX) -FL: FRICTION LOCK (SEE FIG. 2) (USE BSE-XXX-01-D-X-FL) ROW SPECIFICATION -D: DOUBLE (USE BSE-XXX-01-D-X) No OF POSITIONS -020, -040, -060, *-080, *-090, *-100, *-120 (PER ROW) .2850 7.239 REF LEAD STYLE -01: .1280 [3.25] .1200 3.048 REF .0550 1.397 .006 0.147 REF C-126-21-X (SEE NOTE 9) +.0030 +0.08 .1280 - .0010 3.251 - 0.03 (SEE NOTE 7) C C SEE TABLE 1 "A" .0100 0.254 REF .070 1.765 REF LC-08-TM-01 .0060 0.152 REF .2950 7.493 REF .0375 0.953 2 MAX TOE (TYP) -LC: LOCKING CLIP OPTION SHOWN SECTION "A"-"A" "B" BSE-XXX-01-D-A "B" .0375 0.953 REF R .0375 0.953 REF .0350 0.889 REF FIG. 2 -FL OPTION BSE-020-01-X-D-A-FL SHOWN (SAME AS FIG. 1, UNLESS OTHERWISE STATED) (No OF POSITIONS X .0315[.80]) + .1625[4.13] REF BSE-XXX-01-D-X-FL -A: ALIGNMENT PIN OPTION SHOWN .080 2.03 REF BTE-060-01-X-D-A SHOWN (No OF POS X .0315[.80]) + .167[4.21] REF SECTION "B"-"B" SCALE 2 : 1 NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. NOTE DELETED. 3. MAXIMUM BURR ALLOWANCE: .0015 [.038]. 4. MINIMUM PUSHOUT FORCE: .5 LB. 5. NOTE DELETED. 6. -L PLATING MAY BE SUBSTITUTED FOR -F PLATING. 7. MAX VARIENCE: .002 [.05] 8. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC INTERCONNECT PROCESSING GROUP. 9. -90 THROUGH -120 POSITION PARTS USE C-269-11-X. DO NOT SUB C-126-XX-X OR C-224-01-X. PACKAGING VIEW UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS .XX: .01[.25] .XXX: .005[.13] .XXXX: .0020[.051] MATERIAL: TUBE: PT-1-24-03-78 PLUG: TP-09 ANGLES 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 INSULATOR: BLACK LCP FLAMMABILITY RATING: UL94VO SOCKET:PHOS BRONZE C:\EnterpriseVault\DWG\MISC\MKTG\BSE-XXX-01-X-D-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: .8mm DOUBLE ROW SOCKET ASSEMBLY DWG. NO. BSE-XXX-01-X-D-XX BY: DEAN P 05/24/1999 SHEET 1 OF 1