1995 Aug 03 534
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Large types, cylindrical aluminium
case, insulated with a blue sleeve
•Also available in bolt version
(PED-STB)
•Pressure relief in the sealing
•Charge and discharge proof
•Extremely low ESR and ESL
allowing very high ripple current
load, achieved by a special
construction with multiple internal
anode and cathode connections
•Very long useful life: 20000 hours
at 85 °C
•High resistance to shock and
vibration achieved by longitudinal
rills and special internal
construction.
APPLICATIONS
•Computer, telecommunications
and industrial systems
•Smoothing and filtering
•Standard and switched mode
power supplies
•Energy storage in pulse systems.
Fig.1 Component outlines.
handbook, 4 columns
MBC432 - 1
ST STB
handbook, 4 columns
PED ST
114/115
MBG071
smaller
CV-values
in DIN PW
PED PW
050/052 PEC ST
154/155
higher
CV/volume
QUICK REFERENCE DATA
DESCRIPTION VALUE
114 115
Case size (∅Dnom ×Lnom in mm) 35 ×60 to 75 ×105
Rated capacitance range (E6 series), CR150 to 220000 µF
Tolerance on CR−10 to +30%
Rated voltage range, UR10 to 100 V 250 to 400 V
Category temperature range −40 to +85 °C
Endurance test at 85 °C 8000 hours; 400 V: 2000 hours
Useful life at 85 °C 20000 hours; 400 V: 5000 hours
Useful life at 40 °C, 1.4 ×IR applied 350000 hours; 400 V: 90000 hours
Shelf life at 0 V, 85 °C 500 hours
Based on sectional specification IEC 384-4-1/CECC 30300, LL grade
Climatic category IEC 68 (DIN 40040; NF C93-001) 40/085/56 (GPF; 554)
1995 Aug 03 535
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm) for 114 series
Preferred types in bold.
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm) for 115 series
Preferred types in bold.
CR
(µF) UR (V)
10 16 25 40 63 100
1000 −−−−−35 ×60
1500 −−−−−35 ×60
2200 −−−−35 ×60 35 ×80
3300 −−−35 ×60 35 ×60 35 ×105
4700 −−35 ×60 35 ×60 35 ×80 50 ×80
6800 −−35 ×60 35 ×80 35 ×105 50 ×105
10000 −35 ×60 35 ×80 35 ×105 50 ×80 65 ×105
15000 35 ×60 35 ×80 35 ×105 50 ×80 50 ×105 65 ×105
22000 35 ×80 35 ×105 50 ×80 50 ×105 65 ×105 75 ×105
33000 35 ×105 50 ×80 50 ×105 65 ×105 65 ×105 −
47000 50 ×80 50 ×105 65 ×105 65 ×105 75 ×105 −
68000 50 ×105 65 ×105 65 ×105 75 ×105 −−
100000 65 ×105 65 ×105 75 ×105 −−−
150000 65 ×105 75 ×105 −−−−
220000 75 ×105 −−−−−
C
R
(µF) UR (V)
250 350 385 400
150 −−35 ×60 35 ×60
220 −−35 ×80 35 ×80
330 35 ×60 −35 ×105 35 ×105
470 35 ×80 −50 ×80 50 ×80
680 35 ×105 50 ×80 50 ×105 50 ×105
1000 50 ×80 50 ×105 65 ×105 65 ×105
1500 50 ×105 −65 ×105 65 ×105
2200 65 ×105 −75 ×105 75 ×105
3300 65 ×105 75 ×105 −−
4700 75 ×105 −−−
1995 Aug 03 536
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
MECHANICAL DATA AND PACKAGING QUANTITIES
Table 1 Physical dimensions, mass and packaging information; see Fig.2
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance code on rated capacitance (M for ±20%)
•Rated voltage (in V)
•Climatic category in accordance with
“IEC 68”
•Date code (year and week) in accordance with
“IEC 62”
•Code for factory of origin
•Name of manufacturer
•Code number (last 8 digits)
•Code for basic specification in accordance with
“IEC 384-4-1”
and
“CECC 30301”
.
NOMINAL
CASE SIZE
∅D×L
(mm)
∅Dmax
(mm) Lmax
(mm)
P
±0.1
(mm)
A
(mm)
d1
±0.2
(mm) d2×lMASS
(g)
PACKAGING
QUANTITIES
(per box)
OUTER BOX
DIMENSIONS
l×w×h
(mm)
35 ×60 36.5 63 13.0 8.4 8.0 M8 ×12 ≈55 25 196 ×192 ×110
35 ×80 36.5 83 13.0 8.4 8.0 M8 ×12 ≈80 25 196 ×192 ×115
35 ×105 36.5 108 13.0 8.4 8.0 M8 ×12 ≈110 25 196 ×192 ×140
50 ×80 51.5 83 22.0 14.3 8.0 M12 ×16 ≈160 25 293 ×273 ×115
50 ×105 51.5 108 22.0 14.3 8.0 M12 ×16 ≈210 25 293 ×273 ×140
65 ×105 66.5 108 28.5 19.0 9.6 M12 ×16 ≈370 10 368 ×151 ×140
75 ×105 76.5 108 32.0 21.0 9.6 M12 ×16 ≈535 10 418 ×173 ×140
handbook, full pagewidth
MGB303 - 2
11
0.2
P
M5
d1
2
d
5.3 0.7
L
A
9
0.5
D
Dimensions in mm.
For dimensions see Table 1.
Maximum permissible torque which may be applied to the termination screws: 2 Nm.
For accessories refer to this handbook, section
“Mounting Accessories”
.
The capacitors are delivered with screws and washers.
Fig.2 Screw terminal (ST); screw terminal bolt (STB).
1995 Aug 03 537
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Tables 2 and 3 apply at Tamb =20°C,
P = 86 to 106 kPa, RH = 45 to 75%.
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz, tolerance −10 to +30%
IRrated RMS ripple current at 100 Hz, 85 °C and 20 kHz, 70 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
ESR typical equivalent series resistance at 100 Hz
Z impedance at 20 kHz
Tan δmax. dissipation factor at 100 Hz
Ordering example
Electrolytic capacitor PED-ST 114
10000 µF/25 V; −10/+30%
Nominal case size: ∅35 ×80 mm; ST version
Catalogue number: 2222 114 16103.
Table 2 Electrical data and ordering information for the 114 series; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see Table 3 note 1)
2222 ... .....
10 15000 35 ×60 6 11.4 0.90 0.30 20 0.32 13 20 114 14153
22000 35 ×80 7.5 14.2 1.32 0.43 14 0.33 9.5 14 114 14223
33000 35 ×105 10 19 1.98 0.66 10 0.35 7.5 10 114 14333
47000 50 ×80 14 26.5 2.82 0.94 7.5 0.36 5.0 9.5 114 14473
68000 50 ×105 18 34 4.08 1.36 5.5 0.38 4.0 8.0 114 14683
100000 65 ×105 30 50 6.00 2.00 3.5 0.34 3.0 5.0 114 14104
150000 65 ×105 30 50 9.00 3.00 3.0 0.45 3.0 5.0 114 14154
220000 75 ×105 37 50 13.20 4.40 2.0 0.45 2.5 4.0 114 14224
16 10000 35 ×60 6 11.4 0.96 0.32 22 0.22 13 20 114 15103
15000 35 ×80 7.5 14.2 1.44 0.40 15 0.23 9.5 14 114 15153
22000 35 ×105 10 19 2.12 0.71 11 0.25 7.0 10 114 15223
33000 50 ×80 13 24.6 3.17 1.06 7.5 0.26 5.0 9.5 114 15333
47000 50 ×105 18 34 4.52 1.51 5.5 0.27 4.0 8.0 114 15473
68000 65 ×105 28 50 6.53 2.18 3.5 0.24 3.0 5.0 114 15683
100000 65 ×105 28 50 9.60 3.20 3.0 0.31 3.0 5.0 114 15104
150000 75 ×105 37 50 14.40 4.80 2.0 0.31 2.5 4.0 114 15154
1995 Aug 03 538
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
25 4700 35 ×60 5.2 10 0.71 0.24 30 0.14 15 23 114 16472
6800 35 ×60 5.2 10 1.02 0.34 25 0.18 14 21 114 16682
10000 35 ×80 6.7 12.7 1.50 0.50 18 0.18 10 15 114 16103
15000 35 ×105 9.7 18.4 2.25 0.75 12 0.19 7.5 11 114 16153
22000 50 ×80 12.5 23.7 3.30 1.10 8.5 0.19 5.5 9.5 114 16223
33000 50 ×105 18 34 4.95 1.65 6.0 0.21 4.0 8.0 114 16333
47000 65 ×105 27 50 7.05 2.35 4.0 0.18 3.0 5.0 114 16473
68000 65 ×105 27 50 10.20 3.40 3.5 0.23 3.0 5.0 114 16683
100000 75 ×105 37 50 15.00 5.0 2.5 0.23 2.5 4.0 114 16104
40 3300 35 ×60 4.5 8.5 0.80 0.27 37 0.13 21 32 114 17332
4700 35 ×60 4.5 8.5 1.13 0.38 35 0.17 22 33 114 17472
6800 35 ×80 6 11.4 1.64 0.55 25 0.17 15 23 114 17682
10000 35 ×105 7.5 14.2 2.40 0.80 17 0.18 11 17 114 17103
15000 50 ×80 10 19 3.60 1.20 11 0.17 7.5 13 114 17153
22000 50 ×105 15 28.5 5.28 1.76 8.0 0.18 5.5 10.5 114 17223
33000 65 ×105 21 40 7.92 2.64 5.0 0.16 3.5 6.0 114 17333
47000 65 ×105 22 42 11.28 3.76 4.5 0.21 3.5 6.0 114 17473
68000 75 ×105 30 50 16.32 5.44 3.0 0.21 3.0 4.5 114 17683
63 2200 35 ×60 3.7 7 0.84 0.28 39 0.09 22 33 114 18222
3300 35 ×60 3.7 7 1.25 0.42 32 0.11 20 30 114 18332
4700 35 ×80 5.2 10 1.78 0.66 23 0.11 14 21 114 18472
6800 35 ×105 7.5 14.2 2.57 0.86 17 0.11 10 15 114 18682
10000 50 ×80 9.5 18 3.78 1.26 12 0.12 7.5 14 114 18103
15000 50 ×105 13.5 25.6 5.67 1.89 8.5 0.13 5.5 10.5 114 18153
22000 65 ×105 21 40 8.32 2.77 5.0 0.11 3.5 6.0 114 18223
33000 65 ×105 22 42 12.48 4.16 4.5 0.14 3.5 6.0 114 18333
47000 75 ×105 30 50 17.77 5.92 3.0 0.14 3.0 4.5 114 18473
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see Table 3 note 1)
2222 ... .....
1995 Aug 03 539
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
Table 3 Electrical data and ordering information for the 115 series; preferred types in bold
100 1000 35 ×60 3.0 5.7 0.60 0.20 85 0.09 45 67 114 19102
1500 35 ×60 3.3 6.3 0.90 0.30 65 0.10 40 60 114 19152
2200 35 ×80 4.6 8.7 1.32 0.41 45 0.10 28 42 114 19222
3300 35 ×105 6.5 12.3 1.98 0.66 30 0.10 19 28 114 19332
4700 50 ×80 7.4 14.0 2.82 0.94 27 0.11 17 25 114 19472
6800 50 ×105 9.9 18.8 4.08 1.36 19 0.11 12 18 114 19682
10000 65 ×105 15.0 28.5 6.00 2.00 11 0.11 7 11 114 19103
15000 65 ×105 15.8 30.0 9.00 3.00 10 0.12 6 10 114 19153
22000 75 ×105 20.5 38.9 13.20 4.40 7 0.12 5 8 114 19223
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see note 1)
2222 ... .....
250 330 35 ×60 1.8 3.4 0.50 0.17 300 0.15 275 500 115 13331
470 35 ×80 2.5 4.7 0.71 0.24 250 0.15 140 375 115 13471
680 35 ×105 3.5 6.6 1.02 0.34 180 0.15 125 300 115 13681
1000 50 ×80 4.2 8 1.50 0.50 110 0.15 60 130 115 13102
1500 50 ×105 6.3 12 2.25 0.75 60 0.15 40 100 115 13152
2200 65 ×105 8.8 16.7 3.30 1.10 45 0.15 30 60 115 13222
3300 65 ×105 10.5 20 4.95 1.65 30 0.15 25 50 115 13332
4700 75 ×105 14 26.5 7.05 2.35 25 0.15 20 40 115 13472
350 680 50 ×80 3.9 7.0 1.47 0.48 140 0.10 60 130 115 15681
1000 50 ×105 5.4 9.7 2.14 0.71 65 0.10 50 100 115 15102
3300 75 ×105 10.8 19.4 6.93 2.31 30 0.12 20 45 115 15332
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see Table 3 note 1)
2222 ... .....
1995 Aug 03 540
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
Note
1. Catalogue number applies to the ST version; for STB version (not preferred) replace 8th digit by ‘5’ (2222 114/115 5....).
385 150 35 ×60 1.0 1.8 0.34 0.12 730 0.12 450 935 115 18151
220 35 ×80 1.4 2.6 0.50 0.17 520 0.12 310 630 115 18221
330 35 ×105 1.9 3.6 0.75 0.25 340 0.12 210 425 115 18331
470 50 ×80 2.7 5.1 1.06 0.36 200 0.12 140 300 115 18471
680 50 ×105 3.6 6.9 1.53 0.51 140 0.12 100 205 115 18681
1000 65 ×105 5.1 9.7 2.25 0.75 95 0.12 65 125 115 18102
1500 65 ×105 5.7 10.6 3.38 1.13 80 0.12 45 95 115 18152
2200 75 ×105 7.3 13.8 4.95 1.65 55 0.12 40 75 115 18222
400 150 35 ×60 1.0 1.8 0.36 0.12 730 0.12 450 935 115 16151
220 35 ×80 1.4 2.6 0.53 0.18 520 0.12 310 630 115 16221
330 35 ×105 1.9 3.6 0.79 0.26 340 0.12 210 425 115 16331
470 50 ×80 2.7 5.1 1.13 0.38 200 0.12 140 300 115 16471
680 50 ×105 3.6 6.9 1.63 0.54 140 0.12 100 205 115 16681
1000 65 ×105 5.1 9.7 2.40 0.80 95 0.12 65 125 115 16102
1500 65 ×105 5.7 10.6 3.60 1.20 80 0.12 45 95 115 16152
2200 75 ×105 7.3 13.8 5.28 1.76 55 0.12 40 75 115 16222
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
TYP.
100 Hz
(mΩ)
Tan δ
MAX.
100 Hz
Z
TYP.
20 kHz
(mΩ)
Z
MAX.
20 kHz
(mΩ)
CATALOGUE
NUMBER
(see note 1)
2222 ... .....
1995 Aug 03 541
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
Additional electrical data
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods ≤250 V versions Us= 1.15 ×UR
≥350 V versions Us= 1.1 ×UR
Reverse voltage Urev ≤1V
Current
Leakage current after 1 minute at URIL1 ≤0.006CR×UR+4µA
after 5 minutes at URIL5 ≤0.002CR×UR+4µA
Inductance
Equivalent series inductance (ESL) case ∅D = 35 mm typ. 13 nH
case ∅D = 50 mm typ. 16 nH
case ∅D = 65 mm typ. 19 nH
case ∅D = 75 mm typ. 20 nH
1995 Aug 03 542
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
Equivalent series resistance (ESR)
handbook, 4 columns
MGB304
0 50 100
1
10
50 ( C)Tamb o
ESR
(m )Ω
103
102
1
2
3
4
5
6
7
8
Fig.3 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=35×60 mm.
Curve 2: case ∅D×L=35×80 mm.
Curve 3: case ∅D×L=35×105 mm.
Curve 4: case ∅D×L=50×80 mm.
Curve 5: case ∅D×L=50×105 mm.
Curve 6: case ∅D×L=65×105 mm; 100000 µF.
Curve 7: case ∅D×L=65×105 mm; 150000 µF.
Curve 8: case ∅D×L=75×105 mm.
ESR at 100 Hz and UR=10V.
handbook, 4 columns
MGB305
0 50 100
1
10
50 Tamb ( C)
o
103
102
ESR
(m )Ω
1
2
3
4
5
6
7
8
9
Fig.4 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=35×60 mm; 2200 µF.
Curve 2: case ∅D×L=35×60 mm; 3300 µF.
Curve 3: case ∅D×L=35×80 mm.
Curve 4: case ∅D×L=35×105 mm.
Curve 5: case ∅D×L=50×80 mm.
Curve 6: case ∅D×L=50×105 mm.
Curve 7: case ∅D×L=65×105 mm; 22000 µF.
Curve 8: case ∅D×L=65×105 mm; 33000 µF.
Curve 9: case ∅D×L=75×105 mm.
ESR at 100 Hz and UR=63V.
1995 Aug 03 543
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
MGB306
0 50 100
10 50 Tamb ( C)
o
104
103
102
ESR
(m )Ω
1
2
Fig.5 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=50×80 mm.
Curve 2: case ∅D×L=50×105 mm.
ESR at 100 Hz and UR= 250 V.
handbook, 4 columns
MGB307
0 50 10050 Tamb ( C)
o
10
104
103
102
105
ESR
(m )Ω
1
2
3
4
5
6
7
8
Fig.6 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=35×60 mm.
Curve 2: case ∅D×L=35×80 mm.
Curve 3: case ∅D×L=35×105 mm.
Curve 4: case ∅D×L=50×80 mm.
Curve 5: case ∅D×L=50×105 mm.
Curve 6: case ∅D×L=65×105 mm; 1000 µF.
Curve 7: case ∅D×L=65×105 mm; 1500 µF.
Curve 8: case ∅D×L=75×105 mm.
ESR at 100 Hz and UR= 385 V.
1995 Aug 03 544
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
Impedance (Z)
handbook, 4 columns
MGB308
0 50 100
1
10
50 Tamb ( C)
o
Z
(m )Ω
103
1021
2
3
4
5
6
7
Fig.7 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=35×60 mm.
Curve 2: case ∅D×L=35×80 mm.
Curve 3: case ∅D×L=35×105 mm.
Curve 4: case ∅D×L=50×80 mm.
Curve 5: case ∅D×L=50×105 mm.
Curve 6: case ∅D×L=65×105 mm.
Curve 7: case ∅D×L=75×105 mm.
Z at 20 kHz and UR=10V.
handbook, 4 columns
MGB309
0 50 100
1
10
50 Tamb ( C)
o
103
102
Z
(m )Ω1
2
3
4
5
6
7
8
Fig.8 Typical impedance as a function of temperature
Curve 1: case ∅D×L=35×60 mm; 2200 µF.
Curve 2: case ∅D×L=35×60 mm; 3300 µF.
Curve 3: case ∅D×L=35×80 mm.
Curve 4: case ∅D×L=35×105 mm.
Curve 5: case ∅D×L=50×80 mm.
Curve 6: case ∅D×L=50×105 mm.
Curve 7: case ∅D×L=65×105 mm.
Curve 8: case ∅D×L=75×105 mm.
Z at 20 kHz and UR=63V.
1995 Aug 03 545
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
MGB310
0 50 10050 Tamb ( C)
o
10
1
104
103
102
Z
(m )Ω
1
2
3
4
5
6
7
8
Fig.9 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=35×60 mm.
Curve 2: case ∅D×L=35×80 mm.
Curve 3: case ∅D×L=35×105 mm.
Curve 4: case ∅D×L=50×80 mm.
Curve 5: case ∅D×L=50×105 mm.
Curve 6: case ∅D×L=65×105 mm; 2200 µF.
Curve 7: case ∅D×L=65×105 mm; 3300 µF.
Curve 8: case ∅D×L=75×105 mm.
Z at 20 kHz and UR= 250 V.
handbook, 4 columns
MGB311
0 50 10050 Tamb ( C)
o
10
1
104
103
102
Z
(m )Ω
1
2
3
4
5
6
7
8
Fig.10 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=35×60 mm.
Curve 2: case ∅D×L=35×80 mm.
Curve 3: case ∅D×L=35×105 mm.
Curve 4: case ∅D×L=50×80 mm.
Curve 5: case ∅D×L=50×105 mm.
Curve 6: case ∅D×L=65×105 mm; 1000 µF.
Curve 7: case ∅D×L=65×105 mm; 1500 µF.
Curve 8: case ∅D×L=75×105 mm.
Z at 20 kHz and UR= 385 V.
1995 Aug 03 546
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
106
MGB312
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.11 Typical impedance as a function of frequency.
Curve 1: 2200 µF, 63 V.
Curve 2: 15000 µF, 10 V.
Case ∅D×L=35×60 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB313
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.12 Typical impedance as a function of frequency.
Curve 1: 4700 µF, 63 V.
Curve 2: 22000 µF, 10 V.
Case ∅D×L=35×80 mm.
Tamb =20°C.
1995 Aug 03 547
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
106
MGB314
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.13 Typical impedance as a function of frequency.
Curve 1: 6800 µF, 63 V.
Curve 2: 33000 µF, 10 V.
Case ∅D×L=35×105 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB315
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.14 Typical impedance as a function of frequency.
Curve 1: 10000 µF, 63 V.
Curve 2: 47000 µF, 10 V.
Case ∅D×L=50×80 mm.
Tamb =20°C.
1995 Aug 03 548
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
106
MGB316
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.15 Typical impedance as a function of frequency.
Curve 1: 15000 µF, 63 V.
Curve 2: 68000 µF, 10 V.
Case ∅D×L=50×105 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB317
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.16 Typical impedance as a function of frequency.
Curve 1: 22000 µF, 63 V.
Curve 2: 150000 µF, 10 V.
Case ∅D×L=65×105 mm.
Tamb =20°C.
1995 Aug 03 549
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
106
MGB318
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.17 Typical impedance as a function of frequency.
Curve 1: 47000 µF, 63 V.
Curve 2: 220000 µF, 10 V.
Case ∅D×L=75×105 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB319
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.18 Typical impedance as a function of frequency.
Curve 1: 150 µF, 385 V.
Curve 2: 330 µF, 250 V.
Case ∅D×L=35×60 mm.
Tamb =20°C.
1995 Aug 03 550
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
106
MGB320
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.19 Typical impedance as a function of frequency.
Curve 1: 220 µF, 385 V.
Curve 2: 470 µF, 250 V.
Case ∅D×L=35×80 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB321
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.20 Typical impedance as a function of frequency.
Curve 1: 330 µF, 385 V.
Curve 2: 680 µF, 250 V.
Case ∅D×L=35×105 mm.
Tamb =20°C.
1995 Aug 03 551
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
106
MGB322
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
3
Fig.21 Typical impedance as a function of frequency.
Curve 1: 470 µF, 385 V.
Curve 2: 1000 µF, 250 V.
Curve 3: 680 µF, 350 V.
Case ∅D×L=50×80 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB323
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
3
Fig.22 Typical impedance as a function of frequency.
Curve 1: 680 µF, 385 V.
Curve 2: 1000 µF, 350 V.
Curve 3: 1500 µF, 250 V.
Case ∅D×L=50×105 mm.
Tamb =20°C.
1995 Aug 03 552
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
handbook, 4 columns
11010
2103104105106
MBC449
104
1
10
102
103
Z
(m )Ω
f (Hz)
1
2
3
4
Fig.23 Typical impedance as a function of frequency.
Curve 1: 1000 µF, 385 V.
Curve 2: 1500 µF, 385 V.
Curve 3: 2200 µF, 250 V.
Curve 4: 3300 µF, 250 V.
Case ∅D×L=65×105 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB324
105
104
103
102
10 107
f (Hz)
10
1
Z
( )Ω
10 1
10 2
10 3
1
2
Fig.24 Typical impedance as a function of frequency.
Curve 1: 2200 µF, 385 V.
Curve 2: 4700 µF, 250 V
Case ∅D×L=75×105 mm.
Tamb =20°C.
1995 Aug 03 553
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
RIPPLE CURRENT AND USEFUL LIFE
Table 4 Multiplier of ripple current (IR) as a function of frequency
FREQUENCY
(Hz) IR MULTIPLIER
50 0.83
100 1.00
200 1.10
400 1.15
1000 1.19
≥2000 1.20
Fig.25 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 Hz and 85 °C.
IR= rated ripple current at 100 Hz and 85 °C.
With an absolute maximum of 50 A.
(1) Useful life at 85 °C and IR applied: 20000 hours; (5000 hours for 400 V types).
handbook, full pagewidth
2.4
2.1
2.0
1.8
1.6
1.2
1.1
1.0
0.8
0.5
0.0 40 50 60 70 80 90 100
Tamb (C)
o
MGB264
1.3
1.4
1.5
1.7
1.9
2.2
2.3
lifetime multiplier
1
1.2
1.5
2
3
4
2.5
5
8
10
15
20
30
60
80
IA
R
I
(1)
1995 Aug 03 554
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Screw Terminals PED-ST 114/115
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, section
“Tests and Requirements”
.
Table 5 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb =85°C; UR applied; 8000 hours
(400 V types: 2000 hours) UR≤100 V; ∆C/C: ±15%
UR>100 V; ∆C/C: ±10%
Z≤2×spec. limit
IL5 ≤spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb =85°C; UR and IR applied;
20000 hours
(400 V types: 5000 hours)
UR≤100 V; ∆C/C: ±45%
UR>100 V; ∆C/C: ±30%
Z≤3× spec. limit
IL5 ≤spec. limit
no short or open circuit, no
visible damage
total failure percentage:
UR≤100 V: ≤1%;
UR>100 V: ≤3%
Shelf life
(storage at
high temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb =85°C; no voltage applied;
500 hours;
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
∆C/C: ±10%
IL5 ≤2× spec. limit
