MAXP-37161B-PPR - M/A-COM Technology Solutions

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 1

DATA SHEET

SMV2201-SMV2205 Series: Surface Mount, 0402 Silicon

Hyperabrupt Tuning Varactor Diodes

Applications

• Wide bandwidth, low phase noise VCOs

• Wide range voltage-tuned phase shifters and filters

Features

• High Q, low series resistance

• High capacitance ratio at low reverse voltage

• Industry-standard 0402 footprints

• Packages rated MSL1, 260 °C per JEDEC J-STD-020

Description

The SMV2201-SMV2205 series are silicon hyperabrupt junction

varactor diodes specifically designed for wide bandwidth, low-loss

applications. The specified high capacitance ratio and low reverse

voltage make these varactors appropriate for low phase noise

Voltage Controlled Oscillators (VCOs) used at frequencies in

wireless systems up to and above 2.5 GHz.

DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 May 23, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201953A

Table 1. SMV2201-SMV2205 Series Absolute Maximum Ratings

Parameter Symbol Minimum Maximum Units

Forward current IF 20 mA

Reverse voltage VR 22 V

Dissipated power @ 25 °C PD 750 mW

Storage temperature TSTG –55 +200 °C

Junction temperature TJ –55 +175 °C

Solder interface temperature TS –40 +85 °C

Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although these devices are designed to be as robust as possible, Electrostatic Discharge (ESD) can damage them. These

devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the

human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all

times.

Table 2. SMV2201-SMV2205 Series Electrical Specifications (Note 1)

(TS = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)

Part #

Minimum

VBR

@ 10 μA

(V)

Maximum

@ 17.6 V

(nA)

Capacitance Minimum

Quality

Factor, Q,

@ 4.0 V,

f = 50 MHz

Typical

(nH)

Typical

(pF)

CT @ 4.0 V

(pF)

CT @ 20.0 V

(pF)

Min Max Min Max

SMV2201-040LF 22 50 0.73 0.98 0.18 0.33 500 0.45 0.075

SMV2202-040LF 22 50 1.18 1.53 0.28 0.43 500 0.45 0.075

SMV2203-040LF 22 50 1.63 2.08 0.37 0.54 400 0.45 0.075

SMV2204-040LF 22 50 2.53 3.18 0.53 0.78 400 0.45 0.075

SMV2205-040LF 22 50 4.33 5.38 0.83 1.18 400 0.45 0.075

Note 1: Performance is guaranteed only under the conditions listed in this Table.

Electrical and Mechanical Specifications

The absolute maximum ratings of the SMV2201-SMV2205 series

are provided in Table 1. Electrical specifications are provided in

Table 2. Table 3 summarizes the capacitance for reverse voltages

between 0 and 20 V.

Typical performance characteristics of the SMV2201-SMV2205

SERIES are illustrated in Figures 1 and 2.

The SPICE model for the SMV2201-SMV2205 varactors is shown

in Figure 3 and the associated model parameters are provided in

Table 4.

Package Dimensions

The PCB layout footprint for the SMV2201-SMV2205 series is

provided in Figure 4. Typical case markings for each of the

varactors in the series are listed in Table 5 and illustrated in

Figure 5. Package dimensions for the SMV2201-SMV2205 series

are provided in Figure 6. Tape and reel dimensions are provided in

Figure 7.

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 3

The SMV2201-SMV2205 series are rated to Moisture Sensitivity

Level 1 (MSL1) at 260 °C. They can be used for lead or lead-free

soldering. For additional information, refer to the Skyworks

Application Note, Solder Reflow Information, document number

200164.

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

Table 3. Capacitance vs Reverse Voltage

VR (V) CT (pF)

SMV2201-040LF SMV2202-040LF SMV2203-040LF SMV2204-040LF SMV2205-040LF

0 2.10 3.14 4.71 7.17 12.40

1 1.44 2.20 3.24 4.92 8.49

2 1.15 1.79 2.60 3.95 6.77

3 0.95 1.54 2.20 3.33 5.67

4 0.80 1.34 1.89 2.86 4.84

5 0.67 1.18 1.63 2.46 4.13

6 0.55 1.04 1.39 2.09 3.46

7 0.46 0.90 1.16 1.73 2.84

8 0.40 0.76 0.97 1.43 2.35

9 0.36 0.64 0.84 1.21 2.01

10 0.33 0.55 0.74 1.06 1.77

12 0.29 0.45 0.62 0.88 1.47

14 0.27 0.39 0.55 0.77 1.29

16 0.25 0.36 0.50 0.70 1.17

18 0.24 0.33 0.47 0.65 1.08

20 0.23 0.31 0.44 0.61 1.02

Typical Performance Characteristics

(TA = 25 °C, Unless Otherwise Noted)

Figure 1. Capacitance vs Reverse Voltage

Figure 2. Capacitance vs Reverse Voltage + Contact Potential

DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 May 23, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201953A

Figure 3. SPICE Model

Table 4. SPICE Model Parameters

Part Number CJO

(pF)

(V)

M CP

(pF)

(Ω)

(nH)

SMV2201-040LF 2.097 2.984 1.199 0.075 5.41 0.45

SMV2202-040LF 3.159 3.944 1.305 0.075 3.00 0.45

SMV2203-040LF 4.716 3.720 1.310 0.075 2.76 0.45

SMV2204-040LF 7.162 4.196 1.439 0.075 2.19 0.45

SMV2205-040LF 12.427 4.077 1.455 0.075 1.21 0.45

DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 5

Figure 4. SMV2201-SMV2205 Series PCB Layout Footprint

Table 5. SMV2201-SMV2205 Series Typical Case Markings

Part Number Part Marking

SMV2201-040LF DC1

SMV2202-040LF DD1

SMV2203-040LF DE1

SMV2204-040LF DF1

SMV2205-040LF DH1

Figure 5. SMV2201-SMV2205 Typical Case Markings

(Top View)

DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 May 23, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201953A

Figure 6. SMV2201-SMV2205 Series Package Dimensions

Figure 7. SMV2201-SMV2205 Series Tape and Reel Dimensions

DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 7

Ordering Information

Model Name Manufacturing Part Number

SMV2201-040LF Tuning Varactor Diode

SMV2202-040LF Tuning Varactor Diode

SMV2203-040LF Tuning Varactor Diode

SMV2204-040LF Tuning Varactor Diode

SMV2205-040LF Tuning Varactor Diode

SMV2201-040LF

SMV2202-040LF

SMV2203-040LF

SMV2204-040LF

SMV2205-040LF

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of

Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands

and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,

are incorporated by reference.