NJM2132
-
1
-
Ver.2013-01-22
SINGLE-SUPPLY LOW POWER DUAL OPERATIONAL AMPLIFIER
■ GENERAL DESCRIPTION ■ PACKAGE OUTLINE
The NJM2132 is a general purpose single supply low
power dual operational amplifier.
The features of low operating current,wide and low
perating voltage,high input inpedance,and single supply
operation are suitable for battery operated items.
■ FEATURES
● Operating Voltage ( +2.7V~+32V )
● Low Operating Current ( 180µA typ.@ V+=5V,each amplifier )
● Slew Rate ( 2.1V/µs typ. )
● Gain Bandwidth Product ( 1.8MHz typ. )
● Bipolar Technology
● Package Outline DIP8,DMP8,SSOP8
■ PIN CONFIGURATION
■ EQUIVALENT CIRCUIT ( 1/2 Shown )
NJM2132D
NJM2132M
NJM2132V
PIN FUNCTION
1.A OUTPUT
2.A –INPUT
3.A +INPUT
4.V-
5.B +INPUT
6.B –INPUT
7.B OUTPUT
8.V+
V+
V−
NJM2132D NJM2132M
NJM2132V
NJM2132
-
2
-Ver.2013-01-22
■ ABSOLUTE MAXIMUM RATINGS
( Ta=25˚C )
PARAMETER SYMBOL RATINGS UNIT
Supply Voltage V+ 36 V
Differential Input Voltage VID ± 36 V
Input Voltage VIC -0.3~+36 ( note ) V
( DIP8 ) 500
( DMP8 ) 300
Power Dissipation PD
( SSOP8 ) 250
mW
Operating Temperature Range Topr -40~+85 ˚C
Storage Temperature Range Tstg -50~+125 ˚C
( note ) When the supply voltage is less than +36V, the absolute maximum input voltage is equal to the supply voltage.
■ ELECTRICAL CHARACTERISTICS
( V+/V-=±15V,Ta=25˚C )
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Operating Voltage V+ Single Supply +2.7 +32 V
Input Offset Voltage VIO R
S=0Ω - 2.0 4.5
V
+=+5V,V-=0V,RS=0Ω - 2.5 5.0
mV
VIO Drift ∆VIO/T RS=0Ω - 10 - µV/˚C
Input Offset Current IIO - 5 20 nA
Input Bias Current IB - 20 100 nA
Large Signal Voltage Gain AV R
L≥10kΩ,VO=±10V 90 100 - dB
Input Common Mode Voltage Range VICM -15~+13.5 - - V
Common Mode Rejection Ratio CMR RS≤10kΩ 80 90 - dB
Supply Voltage Rejection Ratio SVR RS=100Ω 80 100 - dB
Maximum Output Voltage Swing VOM R
L=10kΩ ± 13.6 ± 14.2 -
+VOM V
+=+5V,V-=0V 3.5 4.3 -
-VOM R
L=10kΩ - 0.05 0.15
V
Operating Current ICC R
L=∞ ( all Amp. ) - 440 500
V
+=+5V,V-=0V - 360 500
µA
Output Source Current ISOURCE V
IN+=1V,VIN-=0V 2.2 3.6 - mA
Output Sink Current ISINK V
IN+=0V,VIN-=1V 15 27 - mA
Input Resistance RIN - 300 - MΩ
Input Capacitance Ci - 0.8 - pF
Close Loop Output Impedance ZO f=1.0MHz - 100 - Ω
Equivalent Input Noise Voltage en R
S=100Ω,f=1kHz - 32 - nV/√Hz
Slew Rate SR RL=10kΩ - 2.1 - V/µs
Gain Bandwidth Product GB f=100kHz - 1.8 - MHz
Power Bandwidth BWP A
V=+1.0,RL=10kΩ
V
O=20VP-P,THD=5% - 35 - kHz
Phase Margin ØM R
L=10kΩ - 60 -
R
L=10kΩ,CL=100pF - 45 -
deg.
Am RL=10kΩ - 15 - Amplitude Margin
R
L=10kΩ,CL=100pF - 5.0 -
dB
THD AV=+10,RL=10kΩ Total Harmonic Distortion
f=10kHz,2≤VO≤20VP-P - 0.03 - %
Channel Separation CS f=10kHz,Input Referrd - 120 - dB
NJM2132
-
3
-
Ver.2013-01-22
■ TYPICAL CHARACTERISTICS
Operating Current
vs. Operating Voltage
(Dual Supply , RL=∞ ,Ta=25℃)
Operating Current
vs. Operating Voltage
(Single Supply , RL=∞ ,Ta=25℃)
Operating Current Icc (mA)
Operating Voltage V+/V− (V)
Operating Current Icc (mA)
Operating Voltage V+ (V)
(RL=10kΩ,Ta=25℃)
Maximum Output voltage Swing
vs. Operating Voltage
Maximum Output voltage Swing ±VOM (V)
Operating Voltage V+/V− (V)
0 ±5
±4 ±12
±10
±16
±15 ±20
Operating Voltage V+ (V)
0 ±8 ±20
Maximum Output voltage Swing
vs. Operating Voltage
(RL=10kΩ,Ta=25℃)
Maximum Output voltage Swing ±VOM (V)
NJM2132
-
4
-Ver.2013-01-22
■ TYPICAL CHARACTERISTICS
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
Maximum Output voltage Swing
vs. Operating Voltage
Maximum Output voltage Swing ±VOM (V)
Load Resistance RL (kΩ)
(V+/V−=±15V,Ta=25℃)
Maximum Output voltage Swing
vs. Operating Voltage
(V+=+5V , Ta=25℃)
Maximum Output voltage Swing ±VOM (V)
Load Resistance RL (kΩ)
Voltage gain phase vs. Frequency
V
oltage gain Av (dB)
Frequency f (Hz)
Phase Margin φM (deg)
Phas
e
Gain
