MASW-007813 GaAs SP4T High Power Switch DC - 3 GHz Features Rev. V2 Functional Schematic Low Voltage Operation: 2.5 V Low Harmonics: < -66 dBc at +34 dBm & 1 GHz Low Insertion Loss: 0.7 dB at 1 GHz High Isolation: 25 dB at 2 GHz 0.5 micron GaAs pHEMT Process Low Profile, Lead-Free 3 mm PQFN Package Halogen-Free Green Mold Compound RoHS* Compliant and 260C Re-flow Compatible A N T Pin 16 Pin 1 100 pF RF1 RF4 100 pF 100 pF Description M/A-COM's MASW-007813 is a GaAs pHEMT MMIC single pole four throw (SP4T) high power switch in a low cost, low profile, lead-free 3 mm PQFN 16-lead package. The MASW-007813 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as CDMA handset and other related applications. The MASW -007813 can be used in all systems operating up to 3 GHz requiring high power at low control voltage. RF2 100 pF Package MASW-007813-TR3000 3000 piece reel MASW-007813-001SMB Sample Board V1 V4 V3 Pin Configuration Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND RF Ground 3 GND RF Ground 4 RF2 RF Port 2 5 V2 Control 2 6 V1 Control 1 7 V4 Control 4 8 V3 Control 3 9 RF3 RF Port 3 10 GND RF Ground 11 GND RF Ground 12 RF4 RF Port 4 13 GND RF Ground 14 ANT Antenna Port 15 GND RF Ground 16 GND 1,2 Part Number 100 pF V2 The MASW-007813 is fabricated using a 0.5 micron gate length GaAs pHEMT process. The process features full passivation for performance and reliability. Ordering Information RF3 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 17 GND (paddle) RF Ground 3 RF Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-007813 GaAs SP4T High Power Switch DC - 3 GHz Rev. V2 Electrical Specifications: TA = 25C, VC = 0 V / 2.75 V, PIN = 34 dBm, Z0 = 50 4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 5 DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB -- -- -- 0.7 0.8 1.0 0.85 -- -- Isolation DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB 25 -- -- 33 27 23 -- -- -- Return Loss DC - 3 GHz dB -- 20 -- P0.1dB 1 GHz dBm -- 38 -- IP2 Two Tone, +26 dBm/Tone, 5 MHz spacing, > 50 MHz dBm -- 96 -- IP3 Two Tone, +26 dBm/Tone, 5 MHz spacing, > 50 MHz dBm -- 58 -- 2nd Harmonic 1 GHz, Pin = +34 dBm dBc -- -76 -68 3rd Harmonic 1 GHz, Pin = +34 dBm dBc -- -68 -66 Trise, Tfall 10% to 90% RF, 90% to 10% RF ns -- 40 -- Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF ns -- 110 -- mV -- 40 -- A -- 20 80 Transients Control Current VC = 2.75 V 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. Truth Table 6,7 Absolute Maximum Ratings 8 ANT - ANT - ANT - ANT RF1 RF2 RF3 RF4 Parameter Absolute Maximum Off Max Input Power (0.5 - 3 GHz, 2.75 V Control) +38 dBm Off Off Operating Voltage +8.5 volts Off On Off Operating Temperature -40C to +85C Off Off On Storage Temperature -65C to +150C V1 V2 V3 V4 1 0 0 0 On Off Off 0 1 0 0 Off On 0 0 1 0 Off 0 0 0 1 Off 6. Differential voltage, V (state 1) - V (state 0), must be +2.5 V minimum and must not exceed 8.5 V. 7. 0 = -8.5 V to 0 V, 1 = -6 V to 8.5 V 8. Exceeding any one or combination of these limits may cause permanent damage to this device. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-007813 GaAs SP4T High Power Switch DC - 3 GHz Rev. V2 Typical Performance Curves Insertion Loss Isolation 1.2 40 1.0 35 0.8 30 +25C +85C -40C 0.6 0.4 0.5 1.0 1.5 2.0 2.5 +25C +85C -40C 25 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Harmonics vs. Control Voltage, 1 GHz Return Loss -60 0 2nd Harmonic 3rd Harmonic +25C +85C -40C 10 -65 20 -70 30 -75 40 0.5 -80 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Control Voltage (V) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-007813 GaAs SP4T High Power Switch DC - 3 GHz Low Profile, Lead-Free 3 mm 16-lead PQFN Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. Qualification Qualified to M/A-COM specification REL-201, Process Flow -2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Rev. V2 MASW-007813 GaAs SP4T High Power Switch DC - 3 GHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 5 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support