Quartus II Software Version 9.1, SP1 Device Support Release Notes RN-01051-1.0 (c) February 2010 This document provides late-breaking information about device support in this version of the Altera(R) Quartus(R) II software. For information about disk space and system requirements, refer to the readme.txt file in your altera/<version number>/quartus directory. For information about New Features, EDA Tool version support, and existing and resolved software issues, refer to the Quartus II Software Release Notes. This document contains the following sections: "Device Support & Pin-Out Status" on page 1 "Memory Requirements/Recommendations" on page 3 "Timing and Power Models" on page 5 "Changes in Device Support" on page 7 Device Support & Pin-Out Status This section contains information about the status of support in the Quartus II software for the devices listed. Full Device Support Full compilation, simulation, timing analysis, and programming support is now available for the following new devices and device packages: Devices with Full Support Device Family Arria(R) Devices II GX EP2AGX190 EP2AGX260 (R) EP4SGX290 EPS4GX530 Stratix IV EP4SGX360 Advance Device Support Compilation, simulation, and timing analysis support is provided for the following devices that will be released in the near future. Although the Compiler generates pin-out information for these devices, the Compiler does not generate programming files for them in this release. (c) February 2010 Altera Corporation Quartus II Software Version 9.1, SP1 Device Support Release Notes Page 2 Device Support & Pin-Out Status Devices with Advance Support Device Family (R) Cyclone III LS Cyclone IV E Devices EP3CLS70F484 EP3CLS70U484 EP3CLS70F780 EP3CLS100F484 EP3CLS100U484 EP3CLS100F780 EP4CE6F17 EP4CE30F23 EP4CE6E22 EP4CE30F29 EP4CE10F17 EP4CE40F23 EP4CE10E22 EP4CE40F29 EP4CE15F17 EP4CE55F23 EP4CE15F23 EP4CE55F29 EP4CE15E22 EP4CE75F23 EP4CE22F17 EP4CE75F29 EP4CE22E22 EP4CE115F23 EP4CE115F29 Cyclone IV GX Stratix IV EP4CGX15BF14 EP4CGX30CF19 EP4CGX15BN11 EP4CGX22BF14 EP4CGX30BF14 EP4CGX22CF19 EP4SE360H29 EP4SE360F35 EP4SE820H35 EP4SE820H40 EP4SE820F43 EP4SGX70HF35 EP4SGX110HF35 EP4SGX290KF43 EP4SGX290NF45 EP4SGX360KF43 EP4SGX360NF45 EP4SGX530KF43 EP4S100G3F45 EP4S100G4F45 EP4S40G5H40 EP4S100G5F45 EP4S100G5H40 Initial Information Device Support Compilation, simulation, and timing analysis support is provided for the following devices that will be released in the near future. Programming files and pin-out information, however, are not generated for these devices in this release. Devices with Initial Information Support Device Family Cyclone IV GX Devices EP4CGX30CF23 EP4CGX150CF23 EP4CGX75CF23 EP4CGX150DF27 EP4CGX75DF27 EP4CGX150DF31 EP4CGX50CF23 EP4CGX110CF23 EP4CGX50DF27 EP4CGX110DF27 EP4CGX110DF31 Quartus II Software Version 9.1, SP1 Device Support Release Notes (c) February 2010 Altera Corporation Memory Requirements/Recommendations Page 3 Compilation Support Compilation support with preliminary timing and power analysis support is provided for the following HardCopy(R) III, HardCopy IV E, and HardCopy IV GX devices. Devices with Compilation Support Device Family (R) HardCopy III HardCopy IV E HardCopy IV GX Devices HC325FF484 HC325FF780 HC325WF484 HC325WF780 HC335LF1152 HC335FF1152 HC335LF1517 HC335FF1517 HC4E25WF484 HC4E25FF484 HC4E25WF780 HC4E25FF780 HC4E35LF1152 HC4E35FF1152 HC4E35LF1517 HC4E35FF1517 HC4GX15LF780 HC4GX15LAF780 HC4GX25FF1152 HC4GX25LF780 HC4GX25LF1152 HC4GX35FF1152 HC4GX35FF1517 Memory Requirements/Recommendations A full installation of the Altera Complete Design Suite requires approximately 8.2 GB of available disk space on the drive or partition where you are installing the Altera Complete Design Suite and approximately 30 MB of available space on the drive that contains your TEMP directory (Windows only). The Quartus II Stand-Alone Programmer requires a minimum of 1 GB of RAM plus additional memory, based on the size and number of SOF files and the size and number of devices being configured. Altera recommends that your system be configured to provide swap space (virtual memory) equal to the recommended physical RAM that is required to process your design. The following table shows the memory required to process designs targeted for Altera devices. (c) February 2010 Altera Corporation Quartus II Software Version 9.1, SP1 Device Support Release Notes Page 4 Memory Requirements/Recommendations Memory Requirements/Recommendations (Part 1 of 2) Recommended Physical RAM Device 32-bit 64-bit Arria GX (EP1AGX20) 512 MB 512 MB 768 MB 1.0 GB 1.0 GB 1.5 GB 1.5 GB 2.0 GB Cyclone (EP1C3, EP1C4, EP1C6, EP1C12, EP1C20) Cyclone II (EP2C5, EP2C8, EP2C20) Cyclone III (EP3C5, EP3C10, EP3C16, EP3C25, EP3C40) Cyclone IV E (EP4CE6, EP4CE10, EP4CE15, EP4CE22, EP4CE30, EP4CE40) Cyclone IV GX (EP4CGX15, EP4CGX22, EP4CGX30) All MAX(R) series and MAX II device families Stratix (EP1S10, EP1S20) Stratix GX (EP1SGX10) Stratix II (EP2S15) Cyclone III (EP3C55, EP3C80) Cyclone IV E (EP4CE55, EP4CE75) Arria GX (EP1AGX35, EP1AGX50, EP1AGX60) Arria II GX (EP2AGX45) Cyclone II (EP2C35, EP2C50) Cyclone IV E (EP4CE115) Cyclone IV GX (EP4CGX50, EP4CGX75) Stratix (EP1S25, EP1S30, EP1S40, EP1S60) Stratix GX (EP1SGX25, EP1SGX40) Stratix II (EP2S30) Stratix II GX (EP2SGX30, EP2SGX60) Stratix III (EP3SL50, EP3SE50, EP3SL70) Arria GX (EP1AGX90) Arria II GX (EP2AGX65) Cyclone II (EP2C70) Cyclone III (EP3C120) Cyclone III LS (EP3CLS70, EP3CLS100) Cyclone IV GX (EP4CGX110, EP4CGX150) HardCopy II (HC210) Stratix (EP1S80) Stratix II (EP2S60, EP2S90) Stratix II GX (EP2SGX90) Stratix III (EP3SE80) Stratix IV (EP4SGX70) Quartus II Software Version 9.1, SP1 Device Support Release Notes (c) February 2010 Altera Corporation Timing and Power Models Page 5 Memory Requirements/Recommendations (Part 2 of 2) Recommended Physical RAM Device 32-bit 64-bit Arria II GX (EP2AGX95, EP2AGX125, EP2AGX190) 3.0 GB 4.0 GB 4.0 GB 6.0 GB N/A 8.0 GB Stratix IV (EP4SE820) N/A 12.0 GB HardCopy IV (HC4E35) N/A 16.0 GB Cyclone III LS (EP3CLS150, EP3CLS200) Stratix II (EP2S130, EP2S180) Stratix II GX (EP2SGX130) HardCopy II (HC220, HC230, HC240) Stratix III (EP3SL110, EP3SE110, EP3SE150, EP3SL200) Stratix IV (EP4SGX110, EP4SGX230) Stratix IV GT (EP4S40G2 and EP4S100G2) Arria II GX (EP2AGX260) Stratix III (EP3SE260, EP3SL340) Stratix IV (EP4GS290) Stratix IV (EP4SGX360, EP4SGX530, EP4SE530) Stratix IV GT (EP4S40G5, EP4S100G3, EP4S100G4, and EP4S100G5) HardCopy III HardCopy IV (HC4E25) Timing and Power Models This section contains a summary of timing and power model status in the current version of the Quartus II software. Devices with Timing and Power Models (Part 1 of 3) Device Family Arria GX Aria II GX Device Timing Model Status Power Model Status EP1AGX20 Final - 7.2 Final - 7.2 EP1AGX35 Final - 7.2 EP1AGX50 Final - 7.2 EP1AGX60 Final - 7.2 EP1AGX90 Final - 7.2 EP2AGX45 Preliminary Preliminary EP2AGX65 EP2AGX95 EP2AGX125 EP2AGX190 EP2AGX260 (c) February 2010 Altera Corporation Quartus II Software Version 9.1, SP1 Device Support Release Notes Page 6 Timing and Power Models Devices with Timing and Power Models (Part 2 of 3) Device Family Cyclone III Cyclone III LS Device Timing Model Status Power Model Status EP3C5 Final - 8.0 SP1 Final - 8.1 EP3C10 Final - 8.0 SP1 EP3C16 Final - 8.0 SP1 EP3C25 Final - 7.2 SP1 EP3C40 Final - 8.0 EP3C55 Final - 8.0 EP3C80 Final - 8.0 EP3C120 Final - 7.2 SP1 EPC3LS70 Preliminary Preliminary Preliminary Preliminary EPC3LS100 EPC3LS150 EPC3LS200 Cyclone IV E (All) Cyclone IV GX (All) Preliminary Preliminary HardCopy II HC210 Correlated - 8.0 Correlated - 7.2 HC210W HC220 HC230 HC240 HardCopy III (All) Preliminary Preliminary HardCopy IV E (All) Preliminary Preliminary Preliminary Preliminary EPM240Z Final - 9.0 SP1 Final - 9.0 SP1 EP2SGX30 Final - 7.0 Final - 7.1 EP2SGX60 Final - 7.0 EP2SGX90 Final - 6.1 EP2SGX130 Final - 6.1 EP3SE50 Final - 9.0 HardCopy IV GX MAX IIZ EPM570Z Stratix II GX Stratix III EP3SE80 Final - 8.1 EP3SE110 Final - 8.1 EP3SE260 Final - 9.0 EP3SL50 Final - 9.0 EP3SL70 Final - 9.0 EP3SL110 Final - 8.1 EP3SL150 Final - 8.1 EP3SL200 Final - 9.0 EP3SL340 Final - 8.1 Quartus II Software Version 9.1, SP1 Device Support Release Notes Final - 9.0 (c) February 2010 Altera Corporation Changes in Device Support Page 7 Devices with Timing and Power Models (Part 3 of 3) Device Family Stratix IV Device EP4SE230(1) Timing Model Status Power Model Status Final - 9.1 SP1 Preliminary EP4SGX180 EP4SGX230(1) EP4S40G2 EP4S100G2 EP4SE360 Preliminary EP4SE530 EP4SE820 EP4SGX70 EP4SGX110 EP4SGX290 EP4SGX360 EP4SGX530 EP4S40G5 EP4S100G3 EP4S100G4 EP4S100G5 Notes: (1) Quartus II Software 9.1 SP1 The current version of the Quartus II software also includes final timing models for the Cyclone, Cyclone II, MAX, MAX II, Stratix, Stratix II, and Stratix GX device families. Timing models for these device families became final in the Quartus II software versions 6.0 and earlier. The current version of the Quartus II software also includes final power models for the Cyclone, Cyclone II, MAX, MAX II, Stratix, Stratix II, and Stratix GX device families. Power models for these device families became final in the Quartus II software versions 6.0 and earlier. Changes in Device Support Cyclone IV GX devices enforce incorrect data rate The Quartus II software version 9.1 SP1 enforces the incorrect transceiver data rate limits for Cyclone IV GX devices with C8 speed grade packages and all F324 or smaller packages. Data rate limits are calculated as follows: (c) February 2010 Data Rate = Channel Width * 125 MHz * X Whereby X = 1.25 if 8b/10b Encoding/Decoding is enabled, otherwise X = 1 Altera Corporation Quartus II Software Version 9.1, SP1 Device Support Release Notes Page 8 Changes in Device Support Applies to: Cyclone IV GX Devices VCCIO pin count incorrect with device migration turned ON When you migrate from a Stratix IV to a HardCopy IV or HardCopy IV GX device, if a pin is NC in the Stratix IV device and VCCIO in either HardCopy device, the migration result is NC. The correct migration result should be VCCIO, when the referred IO bank is available in all devices of the current migration chain. Applies to: HardCopy IV and HardCopy IV GX Devices Arria II GX and Stratix IV GX require regenerating transceiver reconfiguration Memory Initialization File When the transceiver channel and PLL dynamic reconfiguration is enabled, and the transceiver bonding mode is X4 or X8, the TX clock (coreclkout) is inactive after reconfiguration. You must regenerate the transceiver reconfiguration Memory Initialization File (.mif) with the Quartus II software version 9.1 SP1. Applies to: Arria II GX and Stratix IV GX devices Updated Cyclone IV E performance specifications The Quartus II software version 9.1 SP1 performance specifications for Cyclone IV E devices are incorrect. Refer to the Cyclone IV E handbook for the correct performance specifications. Applies to: Cyclone IV E devices Arria II GX devices require recompilation The Quartus II software versions up to and including 9.1 can produce functional failures in Arria II GX devices due to race conditions in the secondary signal region of RAM. This possible malfunction is fixed in Quartus II software version 9.1 SP1, and requires that you recompile your design. Applies to: Arria II GX devices No vertical migration for Engineering Sample Stratix IV 230 GX and E and 530 GX and E Stratix IV 230 GX and E and 530 GX and E devices in Engineering Sample version are not allowed for vertical migration with the production devices due to the voltage changes. (Core voltage for ES devices is 0.95V, while core voltage for production devices is 0.9V.). To access vertical migration, use the corresponding production device in the design. Applies to: Stratix IV devices Migration combinations of devices show fewer VCCIO pins In certain migration combinations of Arria II GX and Stratix IV GX and Stratix E devices, fewer VCCIO pins may be seen as available, when vertical migration in the following paths is enabled: Quartus II Software Version 9.1, SP1 Device Support Release Notes (c) February 2010 Altera Corporation Changes in Device Support Page 9 Arria II GX devices EP2AGX95EF35 with EP2AGX190FF35 or EP2AGX260FF35 EP2AGX125EF35 with EP2AGX190FF35 or EP2AGX260FF35 Pins AJ8 and G8 from VCCIO4B (bank 4B) turn to NC when migration is on in these combinations. Stratix IV E devices EP4SE530F43 with EP4SE820F43 Multiple VCCIO pins from banks 1B, 1C, 2B, 2C, 3C, 4C, 5B, 5C, 6B, 6C, 7C, 8C turn to NC, when migration is on. Stratix IV GX devices EP4SGX110FF35 with EP4SGX180FF35, EP4SGX230FF35, EP4SGX290FF35, EP4SGX360FF35, or HC4GX25LF1152 (HardCopy IV) Multiple VCCIO pins from banks 1A, 1C, 3C, 4C, 6A, 6C, 7C, 8C turn to NC, when migration is on. Applies to: Arria II GX and Stratix IV GX and E devices Power down settings ignored The VCCHIP_R power and VCCHIP_L power options have been removed from the Quartus II software in version 9.1 SP1. The Opportunistically power off setting is no longer available; use the Power on setting instead. Applies to: Stratix IV GX and Stratix IV GT devices Design Software Support for Mature Device Families Design software support for FLEX, APEX, ACEX, and HardCopy Stratix device families is not provided in versions of the Quartus II software beginning with version 9.1. Use the Quartus II software version 9.0 or earlier to support those devices. The Quartus II software version 9.0 and the associated service packs will remain available on the Altera website (http://www.altera.com). Applies to: ACEX, APEX, FLEX and HardCopy Stratix device families (c) February 2010 Altera Corporation Quartus II Software Version 9.1, SP1 Device Support Release Notes