SENSOR SOLUTIONS ///MSP100
Page 1
02/2016
FEATURES
Single Piece Construction;
No Welds, No Oil
100% Stainless Steel Isolation for
Harsh Chemical Measurement
Low Cost
14-Bit Digital Output or Analog
APPLICATIONS
Beverage Dispensing Systems
Water Pressure or Flow Monitor
Medical Equipment
Industrial Equipment/Hydraulics
Tank Level Measurement
Manifold Pressure
MSP100
Pressure Transducer
SPECIFICATIONS
Analog and 14-Bit Digital Output Available
Small Size
Low Cost
316L Stainless Steel or 17-4PH
The MSP100 pressure transducer provides stainless
steel media compatibility in a low cost, small profile solution. This
sensor has no silicone gel or polymeric media isolation methods
to fail in contact with water or other harsh chemicals. Pressure
connections are provided via an o-ring seal. The device is
available in both analog and 14-bit digital output with a port
material of either 316L SS or 17-4PH. Additional custom port
options available to meet your application needs. The small size
vs. performance and media compatibility are provided through
solid-state technology.
STANDARD RANGES
Range
psig
0 to 100
0 to 150
0 to 250
0 to 500
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 2
PERFORMANCE SPECIFICATIONS (ANALOG, OUTPUT SIGNAL “2”)
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
TYP
MAX
UNITS
NOTES
Supply Voltage
5.00
5.25
Vdc
Zero Offset
2
mV
Ratiometric
Span
100
102
mV
Ratiometric
Current Consumption
2
mA
Proof Pressure
Rated
Burst Pressure
Rated
Endurance
0~FS Cycles
Accuracy
±0.2
0.5
%Span
RSS of BFSL: Linearity,
Hysteresis, Repeatability
Long Term Stability
0.25
%Span
Minimum Resistance between
Transducer and Body
MΩ
@250Vdc
Thermal Zero Shift
2.0
%Span
Reference to 25°C over
Compensated Temperature
Thermal Span Shift
2.0
%Span
Reference to 25°C over
Compensated Temperature
Compensation Temperature
45
°C
Operating Temperature
55
°C
Response Time (10% to 90%)
0.1
mS
Vibration
±20g MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve L
Shock
50g, 11 msec half sine shock per mil standard 202F. Method 213B, Condition A
For custom configurations, consult factory.
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 3
PERFORMANCE SPECIFICATIONS (DIGITAL, OUTPUT SIGNAL “J” OR “S”)
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
TYP
MAX
UNITS
NOTES
Supply Voltage
5.0
Vdc
Output at Zero Pressure
1000
1280
Count
Output at FS Pressure
15,000
15,280
Count
Current Consumption
3
mA
Proof Pressure
Rated
Burst Pressure
Rated
Endurance
0~FS Cycles
Accuracy
0.5
%Span
RSS of BFSL: Linearity,
Hysteresis, Repeatability
A/D Resolution
14
Bit
Operating Temperature
55
°C
@250Vdc
Operating Temperature Output
1075
Count
Temperature Accuracy
3
°C
Pressure Port Temperature
Thermal Zero Shift
2.0
%F.S.
Reference to 25°C over
Compensated Temperature
Thermal Span Shift
2.0
%F.S.
Reference to 25°C over
Compensated Temperature
Compensated Temperature
45
°C
Response Time (10% to 90%)
3
mS @ 4MHz
Without Sleep Mode
Response Time (10% to 90%)
8.4
mS @ 4MHz
With Sleep Mode
Vibration
±20g MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve L
Shock
50g, 11 msec half sine shock per mil standard 202F. Method 213B, Condition A
For custom configurations, consult factory.
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 4
DIMENSIONS
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 5
WIRING
Analog mV Output Wiring
Connection
PIN 1
PIN 2
PIN 3
PIN 4
Molex 4pin Connector
+SUPPLY
+OUTPUT
-OUTPUT
-SUPPLY
PCB Mount
Digital I2C Output Wiring
Connection
PIN 1
PIN 2
PIN 3
PIN 4
Molex 4pin Connector
VDD
GND
SDA
SCL
PCB Mount
Digital SPI Output Wiring
Connection
PIN 1
PIN 2
PIN 3
PIN 4
PIN5
Molex 5pin Connector
VDD
GND
SDA
SCLK
SS
PCB Mount
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 6
SENSOR OUTPUT
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 7
TEMPERATURE OUTPUT
MSP100
Pressure Transducer
SENSOR SOLUTIONS ///MSP100
02/2016
Page 8
OUTPUT SIGNAL
Code
Output Signal
Supply Voltage (V)
2
0 – 100mV
5 ± 0.25
J
I2C
2.7 – 5.0
S
SPI
2.7 – 5.0
ORDERING INFORMATION
MS1
J
1
-
0
00
0
0
J
-
100P
G
Model
Output
Signal
Connection
Type
-
Port
Material
00
Sleep Mode
(Digital Only)
Address for I2C
(Digital Only)
Port Type
-
Pressure
Range
Pressure
Type
MS1
2 = 0 - 100mV
J = I2C
S = SPI
1 = Cable 2 ft
with Molex
Connector
A = PCB Mount
(If SPI, PCB
Mount not
available)
-
0 = 316L SS
1 = 17-4PH
00
0 = Without
Sleep Mode
1 = With
Sleep Mode
(If Analog,
use “0”)
0 = 0x28H
1 = 0x36H
2 = 0x46H
3 = 0x48H
4 = 0x51H
(If Analog or SPI,
use “0”)
J = O-Ring
Face Seal
U = O-Ring
Radial Seal
-
100P
150P
250P
500P
G = Gauge
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
EUROPE
MEAS France SAS,
a TE Connectivity Company
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: pfg.cs.asia@meas-spec.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
MS121-00000U-035PG MS121-00000U-100PG MS121-00000U-500PG MS121-00000U-250PG