REFERENCE
PC817X*NSZ1B
1/10
1. These specificat ion sheets incl ude material s protected under co pyright of Shar p Corporation (" Sharp").
Please handle with great c ares and do not reproduce or cause any one to reproduce them without Sharp' s consent.
2. When using this S harp product , please observe the absolute m aximum rati ngs, other conditions and instructions for use
described i n the specificat ion sheets, as w ell as the pre cautions m entioned below.
Sharp ass umes no respon sibility f or any damages resulting from us e of the product whi ch does not com ply wit h absolute
maxi mum ratings, other conditions and ins tructions for us e included in t he specificati on sheets, and the precauti ons
ment ioned below.
(Precautions)
(1) In making catalogue or instructi on manual based on the specifi cation sheets, please verify the validity of the catalogue
or ins truction manu als after assem bling Sharp product s in custom er's products at the responsibi lity of custom er .
(2) This Sharp pr oduct is designed f or use in the fol lowing ap plication areas ;
• Computers • OA equipment • Telecommunication equipment (Terminal) • Measuring equipment
• T ooling machines ・Audi o visual equi pment • Home appl iances
If t he use of the Sh arp product in the ab ove applicat ion areas is for equipment l isted in paragr aphs (3) or (4),
pleas e be sure to obs erve the preca utions given in t hose respectiv e paragraphs.
(3) A ppropriate me asures, such as fai l-safe design and r edundant design c onsidering the s afety design of the overall
syst em and equipm ent, should be tak en to ensure rel iability and safety when Shar p product is used for equipm ent
in re sponsibility of customer w hich demands high re liability and safety in functi on and precisi on, such as ;
• Tr ansportation c ontrol and safet y equipm ent (aircraft, train, aut omobile etc.)
• Traf fic signals • Gas l eakage sensor breakers • Resc ue and security equipment
• Other s afety equipm ent
(4)Shar p product is desi gned for consum er goods and controlled as co nsumer goods i n producti on and quality.
Pleas e do not use thi s product for equi pment which r equire extrem ely high rel iability and safety in function and
precision, s uch as ;
• Spa ce equipment • T el ecommunicati on equipment (for trunk lines)
• Nuclear power control equi pment • Medical equipm ent
(5) Please contact and consult w ith a Sharp sales represent ative if there are any question regardi ng interpretation of
the abov e four paragra phs.
3. Disclaimer
The warr anty peri od for Sharp produc t is one (1) y ear after shipment.
During the period, if ther e are any products problem , Sharp will r epair (if applicab le), replace or r efund.
Except t he above, both parties will discuss to cope wit h the problem s.
The failed Sh arp product after the above one (1) y ear period w ill be coped with by Sharp, prov ided that both par ties
shall dis cuss and determ ine on sharing r esponsibility based on the a nalysis r esults thereof subje ct to the above sc ope
of warranty.
The warr anty descri bed herein is only for Sharp product it self which are purc hased by or delivered to cus tomer .
Dam ages arising from Sharp product m alfunction or f ailure shall be excepted.
Sharp w ill not be respo nsible for the Sharp product due t o the m alfunction or fai lures thereof whi ch are caused by :
(1) storag e keep trouble during the inv entory in the mar keting channel.
(2) intent ional act, negl igence or wrong/po or handling.
(3) equi pment which Sh arp products are connected to or m ounted in.
(4) disass embling, refor ming or chan ging Sharp product s.
(5) installation problem.
(6) act of God or other d isaster (nat ural disaster , fire, f lood, etc.)
(7) extern al factors (abnormal v oltage, abnormal el ectromagnetic wave, fi re, etc.)
(8) speci al environment ( factory, coastal areas , hotspring area, etc.)
(9) phenom enon which c annot be fores een based on th e practical technologies at the t ime of shipm ent.
(10) the factors not incl uded in the produ ct specificat ion sheet.
4. Please contact and consult wi th a Sharp sales repres entative for a ny questions about Sharp product .
REFERENCE
PC817X*NSZ1B
2/10
1. Application
This specif ication appli es to the outline an d characteris tics of photocoupl er Model No. PC817series(L ead-Free T ype).
2. Outline Refer to the attached sheet , page 4.
3. Ratings and character istics Refer to the attached sh eet, page 5, 6.
4. Reliability Refer to the attached sheet, page 7.
5. Outgoing inspection Refer to the attached sheet, page 8.
6. Supplement
6.1 Isolation voltage shall be measured in the f ollowing me thod.
(1) Short bet ween anode and cat hode on the pri mary si de and between coll ector and emitter on t he secondary si de.
(2) The dielectric withstanding tester with zero-cross circuit shall be used.
(3) The wave form of applied voltage shal l be a sine wave.
(I t is recomm ended that the isol ation voltage be m easured in insul ation oil.)
6.2 Package speci fications Refer to the attached sheet , page 9, 10.
6.3 Business dealing name ("○" mark indi cates business d ealing name of orde red product)
Ordered prod uct Business de aling name Rank m ark Ic (mA)
PC817XNNSZ1B
with or w ithout
2.5 to 30
PC817X1NSZ1B
A
4.0 to 8.0
PC817X2NSZ1B
B
6.5 to 13
PC817X3NSZ1B
C
10 to 20
PC817X4NSZ1B
D
15 to 30
PC817X5NSZ1B
A or B
4.0 to 13
PC817X6NSZ1B
B or C
6.5 to 20
PC817X7NSZ1B
C or D
10 to 30
PC817X8NSZ1B
A, B or C
4.0 to 20
PC817X9NSZ1B
B, C or D
6.5 to 30
PC817X0NSZ1B
A, B, C or D
4.0 to 30
6.4 This Model is approved by UL. (Under preparation).
Approved Model No. : PC817
UL fi le No. : E64380
6.5 This Mode l is approved by CSA. (Under preparation).
Approved Model No. : PC817
CSA ap proved mar k " " shall be indic ated on minimum unit package.
6.6 This pr oduct is not d esigned against irradiation.
This product is assembled with electrical input and outp ut.
T his product incor porates non-coherent light e mitting diode.
T es t conditions
IF=5mA
VCE=5V
Ta=25℃
REFERENCE
PC817X*NSZ1B
3/10
6.7 ODS materials
T his product shall not contain the f ollowing mat erials.
Also, the foll owing mater ials shall not be us ed in the produc tion process for this product.
Materials for ODS : CFCS, Halon, Carbon tet rachloride, 1.1.1-T richloroetha ne (Methyl chloroform)
6.8 Specifi ed brominat ed flame retardants
Specified br ominated flam e retardants ( PBB and PBDE) are not used in this device at all.
6.9 Compliance with each regulation
(1) The RoHS directive(2011/65/EU)
This prod uct complies with the RoHS directive(2011/65/EU) .
Object substances : mercury, lead, cadmium , hexavalent chr omium, poly brominated bipheny ls（PBB）
and poly brominated dipheny l ethers（PBDE）
(2) Content of six substances s pecified in Managem ent Methods for Control of Pollut ion Caused by Electronic
Information Produ cts Regulation (Chinese : 电子信息产品污染控制管理办法).
Marking S tyl es for the Names and C ontents of the Hazardous Su bstances
Category
Hazardous Substances
Lead
(Pb) Mercury
(Hg) Cadmium
(Cd)
chromium
(Cr6+)
Polybrominated
biphenyls
(PBB)
Polybrominated
dipheny l ethers
(PBDE)
Photocoupler ○ ○ ○ ○ ○ ○
This table i s prepared in ac cordance wit h the provisions of SJ/T 1 1 364.
○：Indicates that said hazardous substance c ontained in all of the homogeneo us material s for this part i s
below the lim it requirem ent of GB/T 26572
7. Notes
Precautions for photocouplers ： Attachment-1.
REFERENCE
PC817X*NSZ1B
4/10
Pin-Number and i nternal connec tion diagram
③ Emitter
④ Collector
Anode
①
Cathode
②
Anode m ark
Factory identification mark *2
Date code *1
Rank mar k
Ｓ
ＰＣ８１７
Traceability code
Epoxy r esin
θ
θ
θ: 0～13
°
0.25 +0.1
-0.05
2. Outline
UNIT : 1/1 mm
PC817 Outline Dimensions
(Business d ealing name : PC817X*NSZ 1B)
Name
Product m ass : Appr ox. 0.23g
①
②
③
④
2.54 ± 0.25
1.25 ± 0.15
4.60 ± 0.35
6.5 ± 0.5
7.62 ± 0.30
3.2 ± 0.4
3.5 ± 0.5
4.15 ± 0.4
0.5 ± 0.1
*1)
Date code :
3
digit indication according to production year and week
*2) Factory identificatio n mark apply t o the below
K : Kyushu Denshi Co.,Lt d. (Japan products)
Pin material : Copper Alloy
Pin finish : SnBi plating (Bi : 1～4%)
Mark : laser marking
REFERENCE
PC817X*NSZ1B
5/10
3. Ratings and character istics
3.1 Absolute maximum ratings Ta=25℃
Parameter
Symbol
Rating
Unit
Input
*1 Forward cur rent
I
F
50
mA
*2 Peak forward current
I
FM
1
A
Reverse vol tage
V
R
6
V
*1 Power dissipation
P
70
mW
Output
Collector-emitter voltage
V
CEO
80
V
Emitter-collector voltage VECO 6 V
Collector current
I
c
50
mA
*1 Collector power dissipation
P
c
150
mW
*1 Total power di ssipation
P
tot
200
mW
Operating tem perature
T
opr
-30 to +100
℃
St orage temperature
T
stg
-55 to +125
℃
*3 Isol ation vol tage
V
iso(rms)
5
kV
*4 Soldering temperature
T
sol
270
℃
3.2 Electro-optical characteristics Ta=25℃
Parameter
Symbol
Condition
MIN.
TYP.
MAX.
Unit
Input
Forwar d voltage
V
F
I
F
=20mA
-
1.2
1.4
V
Peak forward voltage
V
FM
I
FM
=0.5A
-
-
3.0
V
Reverse current
I
R
V
R
=4V
-
-
10
μ
A
T erm inal capacitance
C
t
V=0, f=1k Hz
-
30
250
pF
Output
Dark current
I
CEO
V
CE
=50V, I
F
=0
-
-
100
nA
Collector-emitter breakdown vol tage
BV
CEO
I
c
=0.1mA I
F
=0
80
-
-
V
Emitter-collector br eakdown voltage
BV
ECO
IE=10μA, IF=0
6
-
-
V
Transfer
charac-
teristics
Collector current
I
c
I
F
=5mA, V
CE
=5V
2.5
-
30
mA
Collector-emitter saturation v oltage
V
CE(sat)
I
F
=20mA I
c
=1mA
-
0.1
0.2
V
Isolation resistance
R
ISO
DC500V 40 to 60%R H
5×1010
10
11
-
Ω
Floati ng capacitance
C
f
V=0, f=1M Hz
-
0.6
1.0
pF
Cut-off fre quency fc
V
CE
=5V, I
c
=2mA
RL=100Ω, -3dB - 80 - kHz
Rise time
tr
VCE=2V Ic=2mA
RL=100Ω
-
4
18
μs
Fall time tf - 3 18 μs
*1 The derati ng factors of abs olute maxim um ratings due to ambient t emperat ure are shown i n Fig. 1 to 4.
*2 Pulse width≦100μs, Duty ratio : 0.001 (Refer to Fi g. 5)
*3 AC for 1 m in, 40 to 60% RH
*4 For 10 s
REFERENCE
PC817X*NSZ1B
6/10
(Fig.1) Forward current
vs. ambient temperature
(Fig.3) Collector power dissipation
v s. ambient tem perature
(Fig.4) T otal power dissipation
v s. ambient temperat ure
(Fig.2) Diode power dis sipation
vs. am bient temperat ure
50
40
30
20
10
0
0
25
75
100
-
30
5
0
Forward current I
F
(mA)
Ambient tem perature T a (
℃
)
125
0
0
25
75
100
20
40
60
80
100
-
30
5
0
70
Diode power dissipation P
(mW)
Ambient tem perature T a (
℃
)
125
-25
-25
200
150
100
50
0
0
25
50
75
100
-30
Ambient tem perature T a (
℃
)
Collector power dissipation P
c
(mW)
125
250
0
0
25
50
75
100
50
100
150
200
-30
Total power dissipation P
tot
(mW)
Ambient tem perature T a (
℃
)
125
250
-25
-25
5
5
5
5
(Fig.5) Peak forward c urrent vs. duty ratio
Ta = 25
℃
10
20
50
100
200
500
1000
2000
10
-3
10
10
10
-
2
-1
0
Peak forward cur rent I
FM
(mA)
Duty ratio
Pulse wid th
≦
100
μ
s
REFERENCE
PC817X*NSZ1B
7/10
θ
θ
4. Reliability
The reliability of products shall satisfy items listed below .
Confidence le vel : 90%
LTPD : 10 or 20
T est Items Condition Failur e Judgment
Criteria Samples (n)
Defective (C)
Solderability 245±3ºC, 5s *2 n=1 1, C=0
Soldering h eat (Flow s oldering) 270ºC, 10 s
VF ＞U×1.2
IR ＞U×2
ICEO ＞U×2
IC ＜L×0.7
VCE(sat) ＞U×1.2
U: Upper specification limit
L: Lower specification limit
n=1 1, C=0
(Soldering by hand) 400ºC, 3 s
T erminal strength
(Tension) Weight: 5N 5 s/each termi nal n=11, C=0
T erminal strength
(Bending) *3 Weight: 2.5 N 2 times/ each terminal n=1 1, C=0
Mechanical sh ock 15km/s2, 0.5ms
3 times/±X, ±Y, ±Z direction n=11, C=0
Variable freque ncy
vibration 100 to 2000 to 100Hz/4 mi n 200m/s2
4 times/X, Y, Z direction n=11, C=0
Temperature cycling 1 cycl e –55 ºC to +125 ºC
(30 min) (30 min)
20 cycl es test n=22, C=0
High tem p. and high
Humidi ty s torage +85ºC, 85%RH, 1000h n=22, C=0
High tem p. storage +125 ºC, 1000h n=22, C=0
Low temp. storage -55 ºC, 1000h n=22, C =0
Operation life IF=50mA, Ptot=200mW
T a=25 ºC, 1000h n=22, C=0
*1 T est m ethod, conform s to EIAJ ED 4701 .
*2 The product w hose not-soldered area is m ore than 5% for all of the di pped area,
and/or whose pinholes or voids are concentra ted on one place shall be judged defect.
*3 T erm inal bending direct ion is shown bel ow .
REFERENCE
PC817X*NSZ1B
8/10
5. Outgoing inspecti on
5.1 Inspection items
(1) Electrical characteristics
VF, IR, ICEO, VCE(sat), Ic, RISO, Viso
(2) Appearance
5.2 Sampling m ethod and Inspect ion level
LTPD sampli ng inspection confiden ce level：90％
Defect I nspection item LTPD（％）
Major defect
Electrical charact eristics(faiure)
Marking (Unread able)
Lead f orm (Def ormation) 3
Minor defect Appearance def ect except
the above m entioned. 50
REFERENCE
PC817X*NSZ1B
9/10
Note 1) Thickness : 0.5
±
0.2mm
2) Process with applying antistatic treatment.
3) Unless otherwise spe cified tolerances shall be ±0.5mm.
(However except for deformation due to the stopper in sleeve.)
6.2 Package specificati on
6.2.1 Package mater ials
No.
Name
Materials
Purposes
①
Sleeve
HIPS or ABS wit h preventing
static electricity Products packaged
②
Stopper Enhanced polymer Products fixed
③
Inner bag Polyethylene Packaging bag for sleeve with product
④
Sealing tape Cellophane Lid of inner bag
⑤
Label Paper Model No.,(Business dealing name),Lot No.,
Quantity, Country of origin , Company name
and Inspection date specified
⑥
Packing case Paper Inner bag packaged
⑦
Cushioning material Polyethylene Inner bag fixed
⑧
Sealing tape Cellophane Lid of packingcase
⑨
Label Paper
Model No.,(Business dealing name),Lot No.,
Quantity, Country of origin , Company name
and Inspection date specified
6.2.2 Package method
(1) MAX. 100pcs. of products shall be packaged in a sleeve ① and both of sleeve edges shall be fixed by stoppers ②.
(2) MAX. 25 sleeves (Product : 2500pcs.) above shall be packaged in inner case ③. and sealed by tape ④.
(3) The label ⑤ shall be put on the top of the inner bag.
(4) Max 2 bags(product : 5000pcs) above shall be packaged in packing case ⑥, and put a cushioning material ⑦ inside.
(5) The label ⑨ shall be put on the side of the packing case.
(6) Case shall be closed with the lid and enclosed with kraft tape ⑧.
6.2.3 Sleeve package ① outline dimensions
(Unit :mm)
6.5 ± 0.2
5.5 ± 0.2
14.2 ± 0.2
6.5 ± 0.2
500 ± 2
11.1 ± 0.2
8.8 ± 0.2
REFERENCE
PC817X*NSZ1B
10/10
Stopper②
Sleeve①
Anode mark
Product
Stopper②
Anode mar k shall be arranged at stopper side wit hout pulled porti on.
Label
⑤
Sealing
tape④
Packing case
⑥
Inner bag
③
Label
⑨
6.2.4 Packing out er case out line dimensi ons
Cushioning m aterial
⑦
Sealing tape
⑧
Regular pac king mass : Approx. 2kg
(85mm)
(180mm)
(535mm)
( ) : Reference dimensions
REFERENCE
PC817X*NSZ1B
Attachment-1.
Precautions for Photocouplers
1 Cleaning
(1) Solvent cleaning : Solvent tem perature 45℃ or less
Imm ersion for 3 min or l ess
(2) Ultrasonic cl eaning : The ef fect to devic e by ul trasonic cleaning di ffers by cleaning bath s ize, ultrasonic pow er output,
cleaning ti me, PCB size or de vice m ounting condition et c. Please test it in actual using condition
and confi rm that any defect doesn't occur before starting t he ultrasonic cl eaning.
(3) Applicable solv ent : Ethy l alcohol, Me thyl alcohol , Isopropyl alcohol
When the other solvent is used, t here are cases that the packaging resin is eroded.
Please use the other solv ent after thorough confirmati on is performed in actual using con dition.
2. Circuit design
2.1 The LED used in t he Photocouple r generally decreases the l ight emission pow er by operati on.
In case of l ong operation ti me, please desi gn the circuit in considerati on of the degradati on
of the lig ht emission pow er of the LED. (50% /5years)
2.2 There are cases t hat the dev iation of the CT R and the degra dation of the relat ive light em ission power
of the LED increase w hen the setti ng value of IF is less tha n 1.0mA. Please desig n the circuit in co nsideration of t his point.
3. Precautions for Soldering
(1) In the case of fl ow soldering (Whole dipping is possible)
It is re commended that f low soldering sho uld be at 270℃ or less for 10 s or less
(Pre-heating : 100 to 150℃, 30 to 80s). (2 times or less)
(2) In the case of h and solderin g
What is don e on the follow ing condition i s recomm ended.( 2 times or le ss)
Soldering i ron temperature : 400℃ or less
T ime : 3s or less
(3) Other precautions
Depending on equipment and soldering condi tions (tem perature, Using sold er etc.),
the ef fect to the device and the PCB is dif ferent.
Please confi rm that ther e is no problem on the actual use conditions in advance.
REFERENCE