OLED-016N002E
www.vishay.com Vishay
Revision: 13-Feb-14 1Document Number: 37704
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 x 2 Character OLED
FEATURES
• Type: Character
• Display format: 16 x 2 characters
• Built-in controller: OLED-0010
• Duty cycle: 1/16
• +5 V power supply, +3 V optional
• Interface: 6800, option 8080 and SPI
• Sunlight readable and polarizer optional
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
•V
SS = 0 V, VDD = 3.0 V/5.0 V
MECHANICAL DATA
ITEM STANDARD VALUE UNIT
Module dimension 84.0 x 44.0 x 10.0 (max.)
mm
Viewing area 66.0 x 16.0
Active area 56.95 x 11.85
Dot size 0.55 x 0.65
Dot pitch 0.60 x 0.70
Mounting hole 76.0 x 36.0
Character size 2.95 x 5.55
Character pitch 3.6 x 6.3
ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL
STANDARD VALUE
UNIT
MIN. MAX.
Supply voltage
for logic VDD to VSS -0.3 5.3 V
Input voltage VI-0.3 VDD
ELECTRICAL CHARACTERISTICS
ITEM SYMBOL CONDITION
STANDARD VALUE
UNIT
MIN. TYP. MAX.
Supply voltage for logic VDD to VSS - 3.0 5.0 5.3 V
Input high voltage VIH - 0.9 VDD -V
DD V
Input low voltage VIL - GND - 0.1 VDD V
Output high voltage VOH IOH = 0.5 mA 0.8 VDD -V
DD V
Output low voltage VOL IOL = 0.5 mA GND - 0.2 VDD V
Supply current IDD VDD = 5 V - 30 - mA
OPTIONS
EMITTING COLOR MOQ
YELLOW GREEN RED BLUE WHITE YELLOW GREEN RED BLUE WHITE
YYYYYNYYYY
OLED-016N002E
www.vishay.com Vishay
Revision: 13-Feb-14 2Document Number: 37704
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
INTERFACE PIN FUNCTION
PIN NO. SYMBOL FUNCTION
1V
SS Ground
2V
DD Supply voltage for logic
3 NC No connection
4 RS H: Data; L: Instruction code
5R/W
H: Read (MPU ← Module); L: Write (MPU → Module)
6EH → L enable signal
7 DB0 Data bit 0
8 DB1 Data bit 1
9 DB2 Data bit 2
10 DB3 Data bit 3
11 DB4 Data bit 4
12 DB5 Data bit 5
13 DB6 Data bit 6
14 DB7 Data bit 7
15 NC No connection
16 NC No connection
DIMENSIONS in millimeters
1.8
5.1
1.6
2-R1.25PTH
2-R2.5PAD
79.0
2.5
16-
Ø
1.0 PTH
38.110.2
2.5
36.0 4.0
76.04.0
44.0 0.5
11.85(AA) 14.48
13.23
2-
Ø
2.5 PTH
2-
Ø
5.0 PAD
84.0 0.5
56.95(AA)
71.26.4
25.2 7.8
16.0VA
9.0 66.0VA
DOT SIZES
SCALE 5/1
0.75
6.3
3.6
2.95
0.55
0.6
5.55
0.65
0.7
0.65
10.0Max
42.0
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
