856532.0 - TriQuint Semiconductor

856532

1950 MHz SAW Bandpass Filter

Data Sheet: Rev D 04-01-15

- 1 of 6 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Applications

• LTE Band 1 UL Filter for Infrastructure

• 3G, 4G Multi-Standard

• Wireless Repeaters

• General Purpose Wireless

• Base Stations

SMP-12, 3.00 x 3.00 x 1.22 mm

Functional Block Diagram

4

2

3

16

5

Input Output

Gnd

Gnd Gnd

Gnd

Product Features

• 60 MHz Bandwidth

• Low Loss

• High Attenuation

• Single-ended Operation

• No impedance matching required for operation at

50 Ω

• Small Size: 3.00 x 3.00 x 1.22 mm

• Ceramic Surface Mount Package (SMP)

• Hermetically Sealed

• RoHS Compliant, Pb-Free

Ordering Information

Part No. Description

856532 Packaged part

856532-EVB Evaluation board

Standard T/R size = 5000 units/reel

Pin Configuration – Single Ended

Pin No. Label

2 Input

5 Output

1,3, 4 6 Ground

General Description

856532 is a

Band 1 Uplink filter for general purpose

wireless applications. This filter was specifically

designed in a 3x3 mm hermetic package f

or base station

applications and is part of our wide portfolio of RF filters

in the same package.

856532 has l

ow insertion loss, coupled with high

attenuation and good power handling, making

this filter a

natural choice for our customers uplink RF filteri

ng

needs and other general purpose applications.

856532 require no matching components

, making filter

implementation easy.

P

b

856532

1950 MHz SAW Bandpass Filter

Data Sheet: Rev D 04-01-15

- 2 of 6 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Absolute Maximum Ratings

Parameter Rating

Notes:

1. Operation of this device outside the parameter ranges given

may cause permanent damage.

2. Specifications are not guaranteed over all operating conditions.

3. Input Power is targeted for an applied CW modulated RF

signal at 105 °C for 10 years.

Storage Temperature

(1)

−40 to +105 °C

Operating Temperature

(2)

−30 to +85 °C

RF Input Power

(3)

+10 dBm

Electrical Specifications

(1)

Test conditions unless otherwise noted:

(2)

Temp= −30 °C to +85 °C

Parameter

(3)

Conditions Min Typ

(4)

Max Units

Center Frequency - 1950 - MHz

Maximum Insertion Loss 1920 – 1980 MHz - 2.5 3.0 dB

Amplitude Ripple

(5)

- 0.7 1.5 dB p-p

Absolute Attenuation

(6)

10 – 1000 MHz

1000 – 1880 MHz

2110 – 2170 MHz

2170 – 3800 MHz

3800 – 5000 MHz

25

20

40

25

18

31.7

31.8

43.6

29.1

22.5

- dB

Input/Output Return Loss 1920 – 1980 MHz 8 9.6 - dB

Test conditions unless otherwise noted:

(2)

Temp= −40 °C to +85 °C

Parameter

(3)

Conditions Min Typ

(4)

Max Units

Maximum Insertion Loss 1920 – 1980 MHz 2.5 3.2 dB

Amplitude Ripple

(

5

)

1920 – 1980 MHz 0.7 1.5 dB p-p

Absolute Attenuation

(6)

10 – 1000 MHz

1000 – 1880 MHz

2110 – 2170 MHz

2170 – 3800 MHz

3800 – 5000 MHz

3800 – 5000 MHz at +105 °C

(8)

25

20

40

25

18

17

31.7

31.8

43.6

29.1

22.5

- dB

Input/Output Return Loss 1920 – 1980 MHz

1920 – 1980 MHz at +105 °C

(8)

8

7

9.6

8.6 - dB

Source Impedance

(

7

)

single-ended - 50 - Ω

Load Impedance

(

7

)

single-ended - 50 - Ω

Notes:

1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3.

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance

over temperature.

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing

tolerances.

4. Typical values are based on average measurements at room temperature.

5. Evaluated as peak-to-adjacent valley ripple.

6. Relative to zero dB.

7. This is the optimum impedance in order to achieve the performance shown.

8.

Extended temperature operation: the filter can be operated up to +105

°C with de

-

rated specification as noted.

856532

1950 MHz SAW Bandpass Filter

Data Sheet: Rev D 04-01-15

- 3 of 6 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Evaluation Board

CH

JJJYM

960700

1,3,4,6

25

50 50

Ω

ΩΩ

Ω Ω

ΩΩ

Ω

Notes:

1. No impedance matching required.

2. Top, middle & bottom layers: 1 oz. copper. Substrates: FR4 dielectric 031” thick. Finish plating: Nickel: 3-8 µm thick, Gold: 0.03 -

0.2 µm thick. Hole plating: Copper min .0008 µm thick.

Bill of Material

Reference Des. Value Description Manuf. Part Number

U1 - 1950 MHz SAW filter TriQuint 856532

SMA - SMA connector Radiall 9602-1111-018

PCB - 3-Layer TriQuint 960700

PCB Mounting Pattern

.96

3.20 SQ

1.27

.38

.81

1.70

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. This drawing specifies the mounting pattern used on the TriQuint

evaluation board for this product. Some modificati

on may be necessary to

suit end user assembly materials and processes.

856532

1950 MHz SAW Bandpass Filter

Data Sheet: Rev D 04-01-15

- 4 of 6 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Performance Plots – Evaluation Board

Test conditions unless otherwise noted:

Temp= +25 °C

856532

1950 MHz SAW Bandpass Filter

Data Sheet: Rev D 04-01-15

- 5 of 6 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Package Information, Marking and Dimensions

0.69

1.22 NOM.

1.32 MAX.

0.75

0.60

1.50

0.75

3.00

CH

code

Marking

Date code

JJJYM

logo

ID dot

TriQuint

Package Style: SMP-12A

Body: Al

2

O

3

ceramic.

Lid: Kovar, Ni plated.

Terminations: Au plating 0.5 - 1.0 μm, over a 2-6 μm Ni plating.

The date code consists of: day of the current year (Julian,

3 digits), Y = last digit of the year, and M = manufacturing site

code.

Notes:

1. All dimensions shown are typical in millimeters.

2. All tolerances are ±0.15 mm except overall length and width

±0.10 mm.

3. An asterisk (*) in front of the marking code indicates prototype.

Tape and Reel information

Standard T/R size = 5000 units/reel. All dimensions are in millimeters

logo

TriQuint

Pad 1 ID dot

Direction of travel

2.0

Ø13.0

Ø20.2

12.8

Ø330

2.7

Ø102

3.25

Section A-A

1.75

Ø1.5

4.0 A

12.0

5.5

Ø1.5

4.0

2.0

3.25

1.4

0.21

A

856532

1950 MHz SAW Bandpass Filter

Data Sheet: Rev D 04-01-15

- 6 of 6 -

Disclaimer: Subject to change without notice

RFMD + TriQuint = Qorvo

Product Compliance Information

ESD Sensitivity Ratings

Caution! ESD-Sensitive Device

ESD Rating: Class 1B

Test:Electrostatic Discharge Sensitivity Testing,

Human Body Model (HBM) - component level

Standard: ESDA/JEDEC JS-001-2012

ESD Rating: Class B

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with both lead-

free (260°C maximum reflow

temperature) and tin/lead (245°C maximum reflow

temperature) soldering processes.

Refer to Soldering Profile

for recommended

guidelines.

RoHs Compliance

This part is

compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

• Lead Free

• Halogen Free (Chlorine, Bromine)

• Antimony Free

• TBBP-A (C

15

H

12

Br

4

0

2

) Free

• PFOS Free

• SVHC Free

MSL Rating

Not applicable. Hermetic package.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations:

Web: www.triquint.com Tel: 877-800-8584

Email: customer.support@qorvo.com

For information about the merger of RFMD and TriQuint as Qorvo:

Web: www.qorvo.com

For technical questions and application information: Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable.

TriQuint makes no warranties regarding the information

contained herein.

TriQuint assumes no responsibility or liability whatsoever for any of the information contained

herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.

The

information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with

such information is entirely with the user. All

information contained herein is subject to change without notice.

Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The

information contained herein or any use of such information does not gr

ant, explicitly or implicitly, to any party any

patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or

anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-

sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal

injury or death.