
www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.016/10/13
Crystal Resonator
Specications:
Oscillation Mode : AT, Fundamental
Nominal Frequency : 14.7456MHz
Load Capacitance : 18pF
Storage Temperature : -40°C to +85°C
Operable Temperature : -20°C to +70°C
Electrical Performance
Frequency Stability : ±30ppm at 25°C ±3°C
Temperature Characteristics : ±30ppm from -20°C to +70°C
Series Resistance : 60Ω max.
Load Resistance : NA
Supply Current : 100mA max.
Shunt Capacitance : 5pF max.
Drive Level Nominal : 100uW
Insulation Resistance : 500MΩ at DC 100V
Aging : ±3ppm/year
Physical & Environmental Parameters
Description Contents Requirements
Vibration 10 to 55Hz, 0.75mm amplitude, in 3 directions
duration of 30 minutes. No mechanical damage and the measured
values shall meet electrical parameters.
Random Dropping The crystal will be test by natural dropping to 30mm
wooden broad 3 times from high of 30cm.
Solder Ability Dipped the terminals no closer than 2mm into the
solder bath at 240 ±5°C for 3 ±0.5sec.
At least 95% of the terminal surface shall be
coated by the solder
Resistance Solder
Heat
Dipped the terminals up to 2mm into the solder bath
(260 ±5°C) for 5 sec., placed in a natural condition
for 2 hours.
Measured values shall meet electrical
parameters.
Thermal Shock
Temperature cycling from -40°C (30mins) to
+85°C(30mins) was performed 3 times, then placed
in a natural condition for 2 hours.
Life Test
(High Temperature)
Placed in a chamber (85 ± 2°C) for 48 hours, then
placed in a natural condition for 2 hours.
Life Test
(Low Temperature)
Placed in a chamber (-40 ± 2°C) for 48 hours, then
placed in a natural condition for 2 hours.
Humidity
Placed in a chamber (Humi: 90% to 95% RH,
Temp: 60±2°C) for 48 hours, then placed in a
natural condition for 2 hours.