BRACKETS RETROREFLECTORS CORDSETS BRT-1 Description: Round, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C Description: Round, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C ACCESSORIES BRT-.6 2.5 mm 2.5 mm 2.5 mm 2.5 mm ClearClear Acrylic Acrylic LensLens 18 mm 18 mm MISCELLANEOUS 20.3 20.3 mm mm 5.1 mm 5.1 mm ClearClear Acrylic Acrylic Lens Lens 23 mm 23 mm BRT-25R BRT-1.5 Description: Round, rivet-secured acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C Description: Round, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C 25 mm 25 mm 5.1 mm 5.1 mm 5.5 5.5mm mm 2.5 mm 2.5 mm 2.8 2.8mm mm 13 13mm mm 25.2 25.2mm mm Clear Clear Acrylic Acrylic Lens Lens Clear Clear AcrylicAcrylic Lens Lens 6.5 6.5mm mm 22mm mm 40 mm40 mm 46 mm46 mm 7.6 mm 7.6 mm BRT-34 BRT-34T Description: Round, acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Description: Round, acrylic target includes mounting tape Reflectivity Factor: 1.2 Temperature: -20 to +60 C 7.4 mm 7.4 mm 7.4 mm 7.4 mm 1 mm 1 mm Mounting Mounting Tape Tape 34.5 mm 34.5 mm 34.5 mm34.5 mm More on next page 710 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com BRT-35DM BRT-41AHT Accessories Description: Round, acrylic target with mounting stud Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. Description: Round, borosilicate (Pyrex type) glass target Reflectivity Factor: 1.0 Temperature: -20 to +200 C Brackets Cordsets Retroreflectors Miscellaneous 9.29.2 mmmm o 10 mm (2) o 10 mm (2) Reference 128 mm GlassGlass mm Lens 102128 mm Lens 102 mm 72 mm 72 mm 41 mm 41 mm Clear Clear Acrylic Acrylic Lens Lens 34.534.5 mmmm M5M5 X 0.8 X 0.8 8.48.4 mmmm 40 mm 40 mm 45 mm 45 mm BRT-42 BRT-42A Description: Round, acrylic target Reflectivity Factor: 1.0 Max. Temperature: 65 C Description: Round, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C 6.3 mm 6.8 6.8 mmmm 6.3 mm 60 mm 60 mm 50.050.0 mmmm 42 mm 42 mm 41 mm o 3.5 mmmm (2) (2) o 3.5 41 mm BRT-42D BRT-2A Description: Round, acrylic target with mounting stud Reflectivity Factor: 1.0 Temperature: -20 to +60 C Description: Round, acrylic target Reflectivity Factor: 1.0 Max. Temperature: 65 C 7.2 mm 7.2 mm 2.8 mm 2.8 mm Clear Clear Acrylic Acrylic Lens Lens Clear Clear Acrylic Acrylic Lens Lens 3.5 3.5 mmmm 7.6 mm7.6 mm Clear Clear AcrylicAcrylic Lens Lens M5 X 0.8 M5 X 0.8 56 mm 56 mm o 5.8 mm o 5.8 mm Mounting Hole Hole Mounting 42 mm 42 mm More on next page information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 711 BRACKETS RETROREFLECTORS CORDSETS BRT-50 BRT-50D Description: Round, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C ACCESSORIES MISCELLANEOUS Description: Round, acrylic target with mounting stud Reflectivity Factor: 1.0 Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. 10.2 10.2mm mm 7.2 mm 7.2 mm 2.8 2.8mm mm 2.8 mm 2.8 mm 1010mm mm Clear Acrylic Lens Clear Clear Acrylic Acrylic Lens Lens Clear Acrylic Lens M5 M5XX0.8 0.8 50.8 50.8mm mm 50.8 mm 50.8 mm BRT-50R BRT-3 Description: Round, rivet-secured acrylic target Reflectivity Factor: 1.0 Max. Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. Description: Round, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. 9 mm 9 mm 5.5 mm 2.8 mm Clear Clear AcrylicAcrylic Lens Lens 13 mm Clear Acrylic Lens 84 mm84 mm 6.5 mm o 4.8 mm o 4.8 mm Mounting Mounting Hole Hole 2 mm 50.8 mm BRT-84 Description: Round, acrylic target Reflectivity Factor: 1.4 Max. Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. 7.4 mm 7.4 mm Clear Clear Acrylic Acrylic Lens Lens 84 mm 84 mm o 4.5 mm o 4.5 mm Mounting Mounting Hole Hole More on next page 712 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com BRT-11X11M BRT-11X11MD Accessories Description: Square, acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. Description: Square, acrylic target with mounting stud Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. Brackets Cordsets Retroreflectors Miscellaneous Reference 11 mm 11 mm 11 mm 11 mm 11 mm 11 mm 11 mm 8.5 mm 8.5 mm 11 mm M3 3.7 mm 5.8 mm 5.8 mm 3.7 mm BRT-35X35B BRT-35X35BM Description: Square, acrylic target Reflectivity Factor: 1.3 Temperature: -20 to +60 C Description: Square, acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. 3535 mm mm 35 mm 7.87.8 mm mm 8.4 mm 34 mm 42 mm 3434mm mm 4242 mm mm 2525 mm mm 25 mm Clearance Clearance forfor M3M3 Clearance for M3 BRT-2X2 BRT-2X2LVC Description: Square, acrylic target Reflectivity Factor: 1.0 Max. Temperature: 50 C Others: Optional brackets are available. See page 620. Description: Square, acrylic target Reflectivity Factor: 1.0 Max. Temperature: -20 to +60 C Others: Optional brackets are available. See page 620. 56 mm 56 mm 51 mm 51 mm 30 mm 30 mm Clear Clear Acrylic Acrylic Lens Lens 4.2 mm x 4.2 14.2mm mmx Slot 14.2 (2) mm Slot (2) 7.5 mm 7.5 mm 51 mm 51 mm 8.9 mm 8.9 mm 51 mm 51 mm 10 mm 10 mm M3 61 mm 61 mm 56 mm 56 mm 10 mm 10 mm 3.5 mm 3.5 mm 51 mm 51 mm 30 mm 30 mm Clear Clear Acrylic Acrylic Lens Lens 4.2 mm x 4.2 14.2mm mmx Slot 14.2 (2) mm Slot (2) 61 mm 61 mm 3.5 mm 3.5 mm More on next page information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 713 ACCESSORIES BRACKETS RETROREFLECTORS CORDSETS MISCELLANEOUS BRT-51X51BM BRT-77X77C Description: Square, acrylic target Reflectivity Factor: 1.5 Max. Temperature: 50 C Other: This target has micro-prism geometry. Optional brackets are available on page 620. Replaces reflector BRT-36X40BM. Description: Square, acrylic target Reflectivity Factor: 2.0 Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. 84.5 mm 51 mm 9 mm 77 mm 6.2 mm 61 mm 51 mm 84.5 mm 77 mm Clear Acrylic Lens 4.5 mm 30 mm 3.5 mm BRT-92X92C BRT-84X84A Description: Square, acrylic target Reflectivity Factor: 3.0 Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. Description: Square, acrylic target Reflectivity Factor: 2.0 Temperature: -20 to +60 C 84 mm84 mm 9.0 mm9.0 mm 100 100 mmmm 9 mm 9 mm 92 mm 92 mm 100 100 mmmm 70 mm70 mm 84 mm84 mm 92 mm 92 mm BRT-4HT BRT-92X92CB Description: Square, aluminum target Reflectivity Factor: 0.15 Max. Temperature: 480 C Other: This target is not recommended for polarized retroflective sensors. Description: Square, acrylic target with black mounting base Reflectivity Factor: 3.0 Max. Temperature: 50 C Other: Optional brackets are available. See page 620. 100 mm 100 mm 92 mm 100 mm 100 mm 92 mm 3.5 mm 714 3.5 mm White White BaseBase 3.5 mm 3.5 mm 4.2 mm4.2 mm 3.5 mm3.5 mm 7.5 mm7.5 mm 92 mm Clear Clear Acrylic Acrylic LensLens 92 mm 9 mm 9 mm Clear Acrylic Lens Clear Acrylic Lens 100 mm Black Base Black Base 100 mm 0.5 mm Aluminum More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page BRT-250 250 x 250 mm BRT-540 540 x 540 mm BRT-700 700 x 700 mm Temperature: -20 to +50 C Other: Square reflector with rigid aluminum backing for use with LT7 Accessories Brackets Cordsets Retroreflectors Miscellaneous Reference information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 715 ACCESSORIES BRACKETS RETROREFLECTORS CORDSETS MISCELLANEOUS BRT-23X14CM BRT-30X20M Description: Rectangular, acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. Description: Rectangular, acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C 13.8 mm 9.7 mm 19.0 mm 13.8 mm 9.7 mm 19.0 mm o 2 mm o 2 mm 4.9 mm 4.9 mm 23.0 mm 23.0 mm 1.0 mm 1.0 mm 20 mm 30 mm 2.5 mm BRT-30X20MT BRT-32X20AM Description: Rectangular, acrylic target includes mounting tape Reflectivity Factor: 1.2 Temperature: -20 to 60 C Description: Rectangular, thin profile acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. 20 mm 20 mm 30 mm Mounting Tape 20 mm 3.0 mm 3.0 mm 2.0 mm 2.0 mm 32 mm 32 mm 26 mm 26 mm 20 mm 20 mm o 3.5 mm o 3.5 mm 2.5 mm BRT-32X22A BRT-35X20A BRT-35X20AB Description: Rectangular, acrylic target Reflectivity Factor: 1.3 Max. Temperature: 65 C Description: Rectangular, acrylic target* Reflectivity Factor: 1.4 Temperature: -20 to +60 C 23.5 mm23.5 mm 25 mm 25 mm 9.5 mm 8 mm 8 mm 9.5 mm o 3.5 mm o 3.5 (2) mm (2) 55 mm 45 mm 55 mm 32 mm 32 mm 45 mm 7.5 mm 4mm Deep o 7.5 mm 4mmo Deep o 4.5 Thru o 4.5 Thru 48 mm 48 mm 40 mm 40 mm 55 mm 55 mm Clear Clear Acrylic Acrylic Lens Lens 3.5 mm 3.5 mm Mounting Mounting Base* Base* * Mounting * Mounting base available base available in whitein(model white BRT-35X20A) (model BRT-35X20A) or blackor(model black BRT-35X20AB). (model BRT-35X20AB). *Mounting base available in white (BRT-35X20A) or black (BRT-35X20AB). 716 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page BRT-40X18A BRT-40X19A Accessories Description: Rectangular, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C Description: Rectangular, acrylic target Reflectivity Factor: 1.3 Temperature: -20 to +60 C Brackets Cordsets Retroreflectors Miscellaneous Reference 8.0 mm 18 mm 50.0 mm 19.3 mm 19.3 mm 60 mm Clear Acrylic Lens o 3.5 mm (2) 50.0 mm 50.0 mm 3.5 mm 7.3 mm 60.2 mm 60.2 mm o 4.0 mm o 4.0 mm BRT-40X19AM BRT-40X20AM Description: Rectangular, thin profile acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. Description: Rectangular, thin profile acrylic target Reflectivity Factor: 1.2 Temperature: -20 to +60 C Other: This target has micro-prism geometry. 19.3 19.3 mm mm 3.2 mm 3.2 mm 20.0 mm 50.0 50.0 mm mm 7.3 mm 30.0 mm 60.2 60.2 mm mm 3.5 mm 37.0 mm 42.0 mm 2.0 mm o 3.0 mm o 4.0omm 4.0 mm BRT-40X23A BRT-40X23 Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Max. Temperature: -20 to +60 C Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Temperature: -20 to +60 C 32.032.0 mmmm 3.6 3.6 mmmm 1.9 1.9 mmmm Clear Acrylic Lens 23.5 mm 40.0 mm 10.010.0 mmmm 23.123.1 mmmm o 3.5 mmmm o 3.5 8.0 mm 39.139.1 mmmm 8.2 8.2 mmmm More on next page information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 717 BRACKETS RETROREFLECTORS CORDSETS MISCELLANEOUS BRT-40X23ABC Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Max. Temperature: -20 to +60 C Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Max. Temperature: 50 C ACCESSORIES BRT-40X23B 11.5 mm 23.5 mm23.5 mm 8.0 mm8.0 mm 47.5 mm47.5 mm Clear Clear Acrylic Acrylic Lens Lens 12.1 mm12.1 mm 3.5 mm3.5 mm 11.3 mm 16.6 mm 20 mm 40.0 mm40.0 mm o 3.5 mm o 3.5 (2) mm (2) 23 mm 40 mm 25.4 mm 33.6 mm M3 3.5 mm3.5 mm BRT-44X29A6 BRT-48X32 Description: Rectangular, acrylic target Reflectivity Factor: 1.1 Max. Temperature: 50 C Other: 6 mm facets; close to the face retroreflective sensing with bifurcated lens. Description: Rectangular, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C 11.5 mm 29 mm 9 mm 44 mm 48.0 mm Clear Acrylic Lens 8.0 mm 32.5 mm o 7.5 mm 4 mm Deep o 4.5 Thru BRT-48X32A BRT-48X32B Description: Rectangular, acrylic target Reflectivity Factor: 1.0 Max. Temperature: -20 to +60 C Description: Rectangular, acrylic target Reflectivity Factor: 1.0 Temperature: -20 to +60 C 32.5 mm 8.0 mm 8.0 mm 32.532.5 mmmm 8.0 mm 48 mm 48 mm 48.0 mm 56.0 mm 65 mm 4.5 mm 4.5 mm Clear Acrylic Lens o 3.5 mm (2) 3.5 mm 17.017.0 mmmm 4 x 10 4 xmm 10 mm (2) (2) Clear Clear Acrylic Acrylic LensLens 57 mm 57 mm 3.5 mm 3.5 mm More on next page 718 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com BRT-53X19A BRT-60X40AF Accessories Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Max. Temperature: -20 to +60 C Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Max. Temperature: -20 to +60 C Other: Anti-fogging coating for use around steam. Optional brackets are available. See page 620. Brackets Cordsets Retroreflectors Miscellaneous 19 mm 19 mm 8.0 mm 8.0 mm 63.0 mm 63.0 mm 53.0 mm 53.0 mm 72 mm 72 mm ClearClear Acrylic Acrylic LensLens o 3.5 omm 3.5(2) mm (2) 52 mm 40 mm 40 mm 34 mm 34 mm Reference 7.5 mm 7.5 mm 60 mm 52 mm M3 3.5 mm 3.5 mm 60 mm M3 3.5 mm 3.5 mm BRT-60X40C BRT-60X40IP69K Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Max. Temperature: -20 to +60 C Other: Optional brackets are available. See page 620. Description: Rectangular, acrylic target (color is amber) Reflectivity Factor: 1.4 Max. Temperature: -20 to 140 C Other: Chemically resistant and IP69K washdown rated. Optional brackets are available. See page 620. 40.5 mm 40.5 mm 7.2 mm7.2 mm 34 mm 34 mm 52.0 mm 52.0 mm 60 mm 60 mm52 mm 40 mm 40 mm 34 mm 34 mm 7.5 mm 7.5 mm 60 mm 52 mm 60 mm Clear Clear AcrylicAcrylic Lens Lens o 3.5 mm o 3.5 (2)mm (2) M3 3.5 mm3.5 mm BRT-62X10AM BRT-80X50C Description: Rectangular, thin profile acrylic target Reflectivity Factor: 1.2 Max. Temperature: -20 to +60 C Other: This target has micro-prism geometry. Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Temperature: -20 to +60 C 10 mm 10 mm 50 mm 56 mm 3.5 mm 3.5 mm 50 mm 56 mm 62 mm 62 mm 50 mm 50 mm 42 mm 42 mm M3 3.5 mm 7.2 mm 7.2 mm 72.0 mm 72.0 mm 80 mm Clear Acrylic Lens o 3.5 mm (2) o 3.5 mm (2) 3.5 mm 3.5 mm 80 mm Clear Acrylic Lens 3.5 mm More on next page information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 719 ACCESSORIES BRACKETS RETROREFLECTORS CORDSETS MISCELLANEOUS BRT-80X50CM BRT-100X18A Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Temperature: -20 to +60 C Other: This target has micro-prism geometry. Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Temperature: -20 to +60 C 50 mm 42 mm 18.5 mm 6.5 mm 18.5 mm 50 mm 7.2 mm 42 mm 72.0 mm 7.2 mm 80 mm 72.0 mm Clear Acrylic Lens o 3.5 mm (2) o 3.5 mm (2) 6.5 mm 110 mm 110 mm 80 mm Clear Acrylic Lens Clear Acrylic Lens 3.5 mm 3.5 mm 120 mm Clear Acrylic Lens 120 mm o 4 mm (2) o 4 mm (2) BRT-100X50 BRT-100X55A Description: Rectangular, acrylic target Reflectivity Factor: 1.5 Temperature: -20 to +60 C Description: Rectangular, acrylic target Reflectivity Factor: 1.5 Temperature: -20 to +60 C o 5.0 mm (2) 101 mm 116 mm Clear Acrylic Lens 132 mm Clear Acrylic Lens 8.0 mm 50.6 mm 9.0 mm 55.5 mm BRT-150X18A BRT-150X18T Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Temperature: -20 to +60 C Description: Rectangular, acrylic target includes mounting tape. Reflectivity Factor: 1.4 Temperature: -20 to 60 C 18 mm 7.7 mm 3.5 mm 170 mm 18 mm 150 mm 160 mm 18 mm 150 mm 7.7 mm 7.7 mm Mounting Tape Mounting Tape Clearance for M4 720 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page BRT-L BRT-180X40A Accessories Description: Rectangular, acrylic target Reflectivity Factor: 0.8 Max. Temperature: 65 C Description: Rectangular, acrylic target Reflectivity Factor: 1.4 Temperature: -20 to +60 C Brackets Cordsets Retroreflectors 42 mm 42 mm 7.4 mm 7.4 mm Miscellaneous Reference 3.8 mm 3.8 mm 19 mm 165 mm 165 mm 165 mm Clear Acrylic ClearLens Acrylic Lens 19 mm Adhesive Backing Adhesive Backing 182 mm 182 mm 150 mm 150 mm Clearance Clearance for M5 for M5 information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 721 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS Retroreflective Tape ACCESSORIES NOTE: S ensing range and signal strength at any given sensor-to-target distance will vary due to target reflectivity and target area. A "Reflectivity Factor" is included for each target model to help predict sensor performance, relative to the excess gain curve plotted for target model BRT-3. Consider, also, target area when predicting performance. Changing to a high reflectivity reflector (like BRT-92X92C) may also extend sensor range and/or reduce the need for frequent reflector maintenance. A high reflectivity factor AND large surface area are needed for maximum range. Reflectivity Factor Maximum Temperature Size 0.7 60 C 75 x 75 mm BRT-THG-3X3-10 10 per pack 0.7 60 C 100 x 100 mm BRT-THG-4X4-5 5 per pack 0.7 60 C 216 x 280 mm BRT-THG-8.5X11-2 2 per pack 0.7 60 C 457 x 914 mm BRT-THG-18X36 Single sheet 0.7 60 C 25 mm wide BRT-THG-1-100 2.5 m length 0.7 60 C 50 mm wide BRT-THG-2-100 2.5 m length 0.7 60 C 75 mm wide BRT-THG-3-100 2.5 m length 0.07 175 C 25 mm wide BRT-THT-100 2.5 m length 0.8 60 C 50 x 50 mm BRT-TVHG-2X2* 0.8 60 C 203 x 254 mm Model Unit BRT-TVHG-8X10P 4 per pack 1 per pack NOTE: Retroreflective material has a pressure-sensitive adhesive. For maximum adhesion, surfaces must be clean and dry before applying. For best results, use full size; target may be trimmed as necessary. These targets are not recommended for polarized retroreflective sensors. * These are sealed micro-prism style pieces and may not be cut. Suitable for use with Laser sensors, VS3 sensors and SME312LPC model sensors. Not suggested for close range (less than 102 mm) except with VS3 sensors. 40.0 mm 40.0 mm MSA Stands * Supports emitter, receiver or corner mirror * Available without stand base, for attaching to a surface * Assembles easily * Includes mounting hardware * Provides mounting T-slots with center dimension of 20 mm online L AUTOCAD, STEP, IGES & PDF 127.0 mm MSA Series Stands Used With** EZ-SCREEN, PICO-GUARD Grids/Points, Mirrors, EZ-ARRAY, MINI-ARRAY and High-Resolution MINI-ARRAY Stand Height (L) Useable Stand Length 616 mm 483 mm MSA-S24-1 1073 mm 940 mm MSA-S42-1 Model* * Available without a base by adding suffix NB to model number (example, MSA-S24-1NB). ** Adapter brackets EZA-MBK-2 (2 each) are required for mounting EZ-SCREEN Grid and Point emitters/receivers or SSM Series mirrors (ordered separately). 722 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page MSA Series Stands (cont'd) Accessories Stand Height (L) Useable Stand Length 1682 mm 1550 mm MSA-S66-1 2140 mm 2007 mm MSA-S84-1 2673 mm 2667 mm MSA-S105-1 SFP12 Safety Points 1067 mm 940 mm SFPA-AG12-1 SFP30 Safety Points 1067 mm 940 mm SFPA-AG30-1 Used With** Brackets Model* Cordsets Retroreflectors Miscellaneous EZ-SCREEN, PICO-GUARD Grids/Points, Mirrors, EZ-ARRAY, MINI-ARRAY and High-Resolution MINI-ARRAY Reference * Available without a base by adding suffix NB to model number (example, MSA-S24-1NB). ** Adapter brackets EZA-MBK-2 (2 each) are required for mounting EZ-SCREEN Grid and Point emitters/receivers or SSM Series mirrors (ordered separately). Run Bar Telescoping Stands * L ocates touch buttons 800 to 1232 mm above the floor surface * Includes swivel-mount bracket to mount Run Bar (Run Bar not included, see page 556) * Made of cold-rolled steel; black powdercoat finish Adjustable 800 to 1232 mm Adjustable 800 to 1232 mm online AUTOCAD, STEP, IGES & PDF 611 mm 145 mm 611 mm 145 mm STBA...S1 STBA...S2 Telescoping Stands Used with Description Model STBA-RB1-S1 STB-VP6-RB1 * Floor-mounted telescoping stand * Stationary base with 4 mounting holes in corners STBA-RB2-S1 STB-VP6-RB2 STBA-RB1-S2 STB-VP6-RB1 * Free-standing, telescoping stand * Movable H-shaped floor base with mounting holes 560 mm apart STB-VP6-RB2 STBA-RB2-S2 information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 723 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS ACCESSORIES Adjustable Mounting Systems * Provides flexible mounting and positioning of sensors and lights * Includes 3" and 6" column mounting kits for mounting area lights and backlights * Features Bogen Arm and clamp for use with P4 and Pro sensors * Offers 2" mounting knuckle assembly for spot lights online AUTOCAD, STEP, IGES & PDF Adjustable Mounting Systems Used With SMBPPLK SMBPPK6 SMBPPK3 SMBPPF1 & SMBPPFB Description Pro P4 Vision Lights Model 3" Column, Base, and Knuckle Kit SMBPPK3 6" Column, Base, and Knuckle Kit SMBPPK6 Mounting Bracket Knuckle SMBPPK 3" Column SMBPPKE3 6" Column SMBPPKE6 Mounting Bracket Base SMBPPKB 2" Mounting Knuckle Assembly SMBPPLK Bogen Arm with Single Knob SMBPPF1 Bogen Arm Clamp SMBPPFB Elevated Use--Stand-off Pipe, Brackets and Adapters Description Length Model Used With Thermoplastic Acetal adapter and cover (M30 to 1/2" NPSM/DN15 ) -- SA-M30TE12 Connects TL50 to 1/2" NPSM/DN15 pipe Thermoplastic Acetal adapter and cover (M30 to 1/2" NPSM/DN15 ) -- SA-M30E12 Connects K50L & K80L to 1/2" NPSM/DN15 pipe 150 mm SOP-E12-150SS 300 mm SOP-E12-300SS 150 mm SOP-E12-150A 300 mm SOP-E12-300A Stainless steel pipe (1/2" NPSM/DN15) K50L K80L TL50 Anodized aluminum pipe (1/2" NPSM/D15) Thermoplastic Acetal mounting base (1/2" NPSM/DN15 to M30) Stainless steel bracket for wall or other flat surfaces 724 -- -- SA-E12M30 SMBE12USS SOP-E12-150A SOP-E12-300A SOP-E12-150SS SOP-E12-300SS More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com Elevated Use--Enclosure Mounts and Extensions Description Accessories Length Thermoplastic Acetal standoff with 30 mm mounting base for cabinet mounting or use with most 30 mm brackets Model Used With Brackets Cordsets Retroreflectors 75 mm SA-M30M30-75 K50L Miscellaneous Reference Zinc coated, oversized right-angle legend plate for identification labels -- SA-30RL55X93 SA-M30M30-75 Thermoplastic Acetal standoff with 22.5 mm mounting base for cabinet mounting 50 mm SA-M22M22-50 K30L Elevated Use--Hanging Bracket Description Length Model Used With Zinc coated bracket with strain relief for mounting one device -- SA-30RL55X93C K50 Push Button VTB Zinc coated bracket for mounting two devices -- SA-30DRL55X93C Sensors and indicators with 30 mm base or barrel mount information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 725 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS ACCESSORIES MSM Corner Mirrors * * * * Compact for light-duty applications Available in 12 lengths Decreases range by 8% Rated 85% efficiency online AUTOCAD, STEP, IGES & PDF Y L2 L1 72.9 mm MSM Corner Mirrors (shown with standard brackets and MSAMB** adapter bracket mounted on MSA stand) MSM Corner Mirrors Reflective Area (Y) Mounting Height (L1)* Mirror Height (L2) Model 165 mm 221 mm 191 mm MSM4A 267 mm 323 mm 292 mm MSM8A 356 mm 411 mm 381 mm MSM12A 457 mm 513 mm 483 mm MSM16A 559 mm 615 mm 584 mm MSM20A 660 mm 716 mm 686 mm MSM24A 762 mm 818 mm 787 mm MSM28A 864 mm 919 mm 889 mm MSM32A 965 mm 1021 mm 991 mm MSM36A 1067 mm 1123 mm 1092 mm MSM40A 1168 mm 1224 mm 1194 mm MSM44A 1270 mm 1326 mm 1295 mm MSM48A *The mounting brackets may be inverted from the positions shown (flanges pointing "inward" instead of "outward," as shown). When this is done, dimension L1 decreases by 57 mm. **MSAMB adapter bracket kit included with each MSA stand. 726 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com SSM Corner Mirrors Accessories * Robust for heavy-duty applications * Extra wide for use with long-range optical safety systems * Available in stainless steel for harsh applications * Available in 20 lengths * Rated 85% efficiency for SSM models and 50% on SSM-S models * Decreases range by 8% for SSM models and 30% for SSM-S models Brackets Cordsets Retroreflectors online Miscellaneous AUTOCAD, STEP, IGES & PDF Y Reference L2 L1 115.0 mm SSM and SSM-S Corner Mirrors (shown with standard brackets and EZA-MBK-2** adapter bracket mounted on MSA stand) SSM Glass Corner Mirrors Model Reflective Area (Y) Mounting Height (L1)* Mirror Height (L2) Aluminum Stainless Steel 100 mm 211 mm 178 mm SSM-100 SSM-100-S 150 mm 261 mm 228 mm SSM-150 SSM-150-S 200 mm 311 mm 278 mm SSM-200 SSM-200-S 250 mm 361 mm 328 mm SSM-250 SSM-250-S 375 mm 486 mm 453 mm SSM-375 SSM-375-S 475 mm 586 mm 553 mm SSM-475 SSM-475-S 550 mm 661 mm 628 mm SSM-550 SSM-550-S 675 mm 786 mm 753 mm SSM-675 SSM-675-S 825 mm 936 mm 903 mm SSM-825 SSM-825-S 875 mm 986 mm 953 mm SSM-875 SSM-875-S 975 mm 1086 mm 1053 mm SSM-975 SSM-975-S 1100 mm 1211 mm 1178 mm SSM-1100 SSM-1100-S 1175 mm 1286 mm 1253 mm SSM-1175 SSM-1175-S 1275 mm 1386 mm 1353 mm SSM-1275 SSM-1275-S 1400 mm 1511 mm 1478 mm SSM-1400 SSM-1400-S 1475 mm 1586 mm 1553 mm SSM-1475 SSM-1475-S 1550 mm 1661 mm 1628 mm SSM-1550 SSM-1550-S 1675 mm 1786 mm 1753 mm SSM-1675 SSM-1675-S 1750 mm 1861 mm 1828 mm SSM-1750 SSM-1750-S 1900 mm 2011 mm 1978 mm SSM-1900 SSM-1900-S * The mounting brackets may be inverted from the positions shown (flanges pointing "inward" instead of "outward," as shown). When this is done, dimension L1 decreases by 58 mm. ** One EZA-MBK-2 adapter bracket kit required if used with a MSA stand. NOTE: The total range decreases by approximately 8% per mirror. information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 727 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS ACCESSORIES Tubular Enclosures * A vailable for EZ-ARRAYTM, MINI-ARRAY(R) or EZ-SCREEN(R) standard 14 & 30 mm * Ideal for high-pressure washdown environments * Made of clear FDA-grade polycarbonate tubing, with acetal end caps * Includes stainless mounting brackets and hardware * Rated NEMA 4X; IP67 L online AUTOCAD, STEP, IGES & PDF o 86.4 mm EZA-TE Tubular Enclosures Emitter/Receiver Model EZ-SCREEN EZ-ARRAY Used With Emitter/Receiver Defined Area/Array Length Enclosure Height (L) Model SLS..-150 EA5..-150 150 mm 439 mm EZA-TE-150 SLS..-300 EA5..-300 300 mm 541 mm EZA-TE-300 SLS..-450 EA5..-450 450 mm 744 mm EZA-TE-450 SLS..-600 EA5..-600 600 mm 846 mm EZA-TE-600 SLS..-750 EA5..-750 750 mm 1024 mm EZA-TE-750 SLS..-900 EA5..-900 900 mm 1151 mm EZA-TE-900 SLS..-1050 EA5..-1050 1050 mm 1354 mm EZA-TE-1050 SLS..-1200 EA5..-1200 1200 mm 1455 mm EZA-TE-1200 SLS..-1350 -- 1350 mm 1608 mm EZA-TE-1350 SLS..-1500 EA5..-1500 1500 mm 1760 mm EZA-TE-1500 SLS..-1650 -- 1650 mm 1913 mm EZA-TE-1650 SLS..-1800 EA5..-1800 1800 mm 2065 mm EZA-TE-1800 NOTE: Use of the enclosure affects the sensing range of the emitter/receiver used: when in pairs, range can be reduced by 50%. MSA-TE Tubular Enclosures Used With Emitter/Receiver Model MINI-ARRAY High-Resolution MINI-ARRAY MINI-ARRAY High-Resolution MINI-ARRAY MINI-ARRAY High-Resolution MINI-ARRAY MINI-ARRAY High-Resolution MINI-ARRAY BMEL616A/BMRL616A BMEL632A/BMLR632A Emitter/Receiver Array Length 201 mm MAHE6A/MAHR6A 233 mm BMEL1216A/BMRL1216A 356 mm BMEL1232A/BMRL1232A 356 mm MAHE13A/MAHR13A 396 mm BMEL1816A/BMRL1816A 505 mm BMEL1832A/BMRL1832A 505 mm MAHE19A/MAHR19A 559 mm BMEL2416A/BMRL2416A 659 mm BMEL2432A/BMRL2432A 659 mm MAHE26A/MAHR26A 721 mm Enclosure Height (L) Model 439 mm MSA-TE-8 541 mm MSA-TE-12 744 mm MSA-TE-20 846 mm MSA-TE-24 947 mm MSA-TE-28 NOTE: Use of the enclosure affects the sensing range of the emitter/receiver used: when in pairs, range can be reduced by 50%. 728 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page MSA-TE Tubular Enclosures (cont'd) Accessories Brackets Used With Emitter/Receiver Model BMEL3016A/BMRL3016A MINI-ARRAY MAHE32A/MAHR32A MINI-ARRAY High-Resolution MINI-ARRAY MAHE38A/MAHR38A 1046 mm BMEL4216A/BMRL4216A 1115 mm BMEL4232A/BMRL4232A 1115 mm MAHE45A/MAHR45A 1212 mm BMEL4816A/BMRL4816A MINI-ARRAY 1267 mm BMEL4832A/BMRL4832A High-Resolution MINI-ARRAY Retroreflectors Miscellaneous 963 mm BMEL3632A/BMRL3632A High-Resolution MINI-ARRAY Model 1049 mm MSA-TE-32 1151 mm MSA-TE-36 1354 mm MSA-TE-44 1455 mm MSA-TE-48 Reference 884 mm BMEL3616A/BMRL3616A MINI-ARRAY Enclosure Height (L) 810 mm BMEL3032A/BMRL3032A High-Resolution MINI-ARRAY Cordsets Emitter/Receiver Array Length MAHE51A/MAHR51A 1377 mm NOTE: Use of the enclosure affects the sensing range of the emitter/receiver used: when in pairs, range can be reduced by 50%. EZA-S Protective Enclosures 145.0 mm * P rovide rugged protection for sensors and mirrors in high-traffic areas * Available for mirrors and EZ-SCREEN(R) Point and Grid * Meets ANSI/RIA 15.06 and ISO 13855 standards for beam spacing * Includes independently adjustable mirrors and bubble level to simplify alignment * Rotates up to 20 L online AUTOCAD, STEP, IGES & PDF o 177.8 mm EZA-S Protective Enclosure EZA-S EZ-SCREEN(R) Protective Enclosures Used With Emitter/Receiver Model Emitter/Receiver Protected Area Enclosure Height (L) No. of Openings Application Standard Models SG..4-300 900 mm 1543 mm 4 ANSI/RIA R15.06 ISO 13855 EZA-S300 SG..3-400 800 mm 1238 mm 3 ANSI/RIA R15.06 ISO 13855 EZA-S400 EZA-S300-M EZA-S400-M More on next page *Model numbers with suffix M include vertical mirrors for perimeter-guarding applications. Model numbers with suffix M45 include two 45-mounted mirrors for access-guarding applications. NOTE: The rear-surfaced glass mirrors are rated at 85% efficiency per mirror and reduce maximum range by 8% per mirror. information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 729 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS EZA-S EZ-SCREEN(R) Protective Enclosures (cont'd) Used With ACCESSORIES Emitter/Receiver Model Emitter/Receiver Protected Area SG..2-500 500 mm SP..1 -- SG..3-533 1066 mm SG..2-584 584 mm SP..1 -- Enclosure Height (L) No. of Openings Application Standard Models EZA-S500 1035 mm 2 EZA-S500-M ISO 13855 EZA-S500-M45 1543 mm 3 ANSI/RIA R15.06 1238.2 mm 2 ANSI/RIA R15.06 EZA-S533 EZA-S533-M EZA-S584 EZA-S584-M EZA-S584-M45 *Model numbers with suffix M include vertical mirrors for perimeter-guarding applications. Model numbers with suffix M45 include two 45-mounted mirrors for access-guarding applications. NOTE: The rear-surfaced glass mirrors are rated at 85% efficiency per mirror and reduce maximum range by 8% per mirror. Explosion-Proof Enclosures * P rotects light screen in environments with flammable gases, liquids or dust * Available for EZ-SCREEN(R) 14 and 30 resolution models * Complies with UL and CSA for use in specific hazardous atmospheres * Includes mounting brackets and hardware * Reduces range by approximately 25% per emitter/receiver pair 968 mm 1321 mm online AUTOCAD, STEP, IGES & PDF 117 mm 197 mm 114 mm Model ..-XPE-32 Explosion-Proof Enclosure 254 mm Model ..-XPE-43 Explosion-Proof Enclosure Explosion-Proof Enclosures Used With Model Family Emitter/Receiver Defined Area Model EZ-SCREEN (14 and 30 mm Resolution) 450 to 600 mm SS-XPE-32 EZ-SCREEN (14 and 30 mm Resolution) 750 to 1050 mm SS-XPE-43 NOTE: Use of enclosure affects the sensing range of emitter/receiver used: when used in pairs, range can be reduced by 25%. 730 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com Heated Enclosures Accessories * A vailable for MINI-ARRAY or High-Resolution MINI-ARRAY * Protects emitter/receiver in outdoor environments * Includes humidistat and resistance wires to keep window free of condensation, snow or ice * Provides choice of stainless steel or aluminum housings (R) (R) Brackets Cordsets Retroreflectors Miscellaneous L Reference online AUTOCAD, STEP, IGES & PDF 187 mm 204 mm MINI-ARRAY(R) and High-Resolution MINI-ARRAY(R) Heated Enclosures Material Finish** Array Length Overall Enclosure/Height (L) Clear Window Height Model Aluminum Painted 133 to 1210 mm 1.7 m 1.5 m BMHE4A/BMHL4G Aluminum Painted 1505 to 1514 mm 2.0 m 1.8 m BMHE5A/BMHL5G Aluminum Painted 1810 to 1819 mm 2.2 m 2.0 m BMHE6A/BMHL6G Stainless Steel Painted 133 to 1210 mm 1.7 m 1.5 m BMHE4SS/BMHL4GSS Stainless Steel Painted 1505 to 1514 mm 2.0 m 1.8 m BMHE5SS/BMHL5GSS Stainless Steel Painted 1810 to 1819 mm 2.2 m 2.0 m BMHE6SS/BMHL6GSS Stainless Steel Non-painted 133 to 1210 mm 1.7 m 1.5 m BMHE4SSN/BMHL4GSSN Stainless Steel Non-painted 1505 to 1514 mm 2.0 m 1.8 m BMHE5SSN/BMHL5GSSN Stainless Steel Non-painted 1810 to 1819 mm 2.2 m 2.0 m BMHE6SSN/BMHL6GSSN * Enclosures require a power supply (see page 739). ** Standard color is Federal Safety Yellow (Federal Standard color# 23538). Contact Factory for other colors. 173 mm PresencePLUS(R) Enclosure Kits * * * * * * * Protects sensor, ring light or both Keeps dust and dirt off lens and light Prevents accidental bumps and scratches Discourages vandalism and tampering Helps maintain lens focus by enclosing the lens and sensor Available in models that protect camera and light during washdown Offers choice of models with glass or plastic viewport PresencePLUS Enclosure Kits (R) Description Heavy-duty stainless-steel enclosure kitglass viewport; NEMA 6 rated Heavy-duty stainless-steel enclosure kitpolycarbonate viewport; NEMA 6 rated online 140 mm 241 mm PPE4 Models AUTOCAD, STEP, IGES & PDF 177.8 mm 55.4 mm 254 mm 61.7 mm 207.5 mm PPE Models P4RE67 Models Used With P4 (right-angle) & Ring Light 115.3 mm Model P4RE67-G P4RE67-P More on next page information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 731 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS PresencePLUS(R) Enclosure Kits (cont'd) Description Used With Pro Camera & Lens PPE-G Replacement viewportglass PPE-G PPE-RG Replacement viewportpolycarbonate PPE-P PPE-RP Heavy-duty cold-rolled steel industrial protection kitglass viewport; NEMA 1 rated ACCESSORIES Model Heavy-duty cold-rolled steel industrial protection kitpolycarbonate viewport; NEMA 1 rated PPE-P SMBPPES Straight Mounting bracket Right-angle mounting bracket PPE-P & PPE-G SMBPPEA SMBPPEF Front mounting bracket Heavy-duty stainless-steel enclosure kitglass viewport; NEMA 4 rated Pro Camera & Ring Light Heavy-duty stainless-steel enclosure kitpolycarbonate viewport; NEMA 4 rated PPE4-G PPE4-P Lens Shields * Covers the lens of the emitter/receiver to prevent damage * Available for the LX, EZ-ARRAY TM, MINI-ARRAY(R) and EZ-SCREEN(R) * Installs easily * Made of rugged polycarbonate L online AUTOCAD, STEP, IGES & PDF EZ-ARRAYTM & EZ-SCREEN(R) (14 & 30 mm Resolution) Lens Shields Used With Installation* Adhesive Snap-on Adhesive Snap-on Adhesive Snap-on Adhesive Snap-on Adhesive Snap-on Adhesive Snap-on EZ-ARRAY EZ-SCREEN -- SLS..-150.. EA5..300 SLS..-300.. EA5..450 EA5..600 SLS..-450.. SLS..-600.. Defined Area/Array Length 300 mm 450 mm 600 mm EA5..750 SLS..-750.. 750 mm EA5..900 SLS..-900.. 900 mm Lens Shield Length (L) Model 258 mm EZS-150 236 mm EZSS-150 368 mm EZS-300 346 mm EZSS-300 518 mm EZS-450 496 mm EZSS-450 667 mm EZS-600 645 mm EZSS-600 817 mm EZS-750 795 mm EZSS-750 967 mm EZS-900 945 mm EZSS-900 NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%. * Adhesive models are polycarbonate with neoprene gasket. Snap-on models are constructed of copolyester. 732 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page EZ-ARRAYTM & EZ-SCREEN(R) (14 & 30 mm Resolution) Lens Shields (cont'd) Brackets Used With Installation* Adhesive Snap-on Adhesive Snap-on Adhesive Snap-on Adhesive Snap-on Adhesive EZ-ARRAY EZ-SCREEN Defined Area/Array Length EA5..1050 SLS..-1050.. 1050 mm EA5..1200 SLS..-1200.. 1200 mm -- SLS..-1350.. -- SLS-1650.. 1650 mm SLS..-1500.. 1500 mm EA5..1800 SLS..-1800.. 1800 mm Snap-on EA5..2100 -- Snap-on EA5..2400 -- Adhesive Snap-on Lens Shield Length (L) 1350 mm EA5..1500 Snap-on Accessories Cordsets Model 1116 mm EZS-1050 1094 mm EZSS-1050 1266 mm EZS-1200 1244 mm EZSS-1200 1416 mm EZS-1350 1394 mm EZSS-1350 1715 mm EZS-1650 1693 mm EZSS-1650 1565 mm EZS-1500 1543 mm EZSS-1500 1865 mm EZS-1800 1843 mm EZSS-1800 2100 mm 2144 mm EZSS-2100 2400 mm 2444 mm EZSS-2400 Lens Shield Length (L) Model Retroreflectors Miscellaneous Reference NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%. * Adhesive models are polycarbonate with neoprene gasket. Snap-on models are constructed of copolyester. MINI-ARRAY(R) Lens Shields Used With Installation Adhesive Emitter/Receiver Model MINI-ARRAY Array Length BMEL1216A/BMRL1216A 286 mm BMEL1232A/BMRL1232A 295 mm BMEL2416A/BMRL2416A 591 mm BMEL2432A/BMRL2432A 600 mm BMEL3616A/BMRL3616A 895 mm BMEL3632A/BMRL3632A 905 mm BMEL4816A/BMRL4816A 1200 mm BMEL4832A/BMRL4832A 1210 mm 341 mm MSS12 643 mm MSS24 948 mm MSS36 1253 mm MSS48 NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%. * Other lens shield lengths are available, contact factory at 1-888-373-6767. EZ-SCREEN(R) LP (14 & 25 mm Resolution) Lens Shields Used With Installation* Emitter/Receiver Model Lens Shield Length (L) SLP..-270 Snap-on 270 mm Model LPSS-270 SLP..-410 410 mm LPSS-410 SLP..-550 550 mm LPSS-550 LPSS-690 SLP..-690 690 mm SLP..-830 830 mm LPSS-830 SLP..-970 970 mm LPSS-970 SLP..-1110 1110 mm LPSS-1110 More on next page NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%. * Adhesive models are polycarbonate with neoprene gasket. Snap-on models are constructed of copolyester. information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 733 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS EZ-SCREEN(R) LP (14 & 25 mm Resolution) Lens Shields (cont'd) Used With ACCESSORIES Installation* Emitter/Receiver Model Snap-on Lens Shield Length (L) Model SLP..-1250 1250 mm LPSS-1250 SLP..-1390 1390 mm LPSS-1390 LPSS-1530 SLP..-1530 1530 mm SLP..-1670 1670 mm LPSS-1670 SLP..-1810 1810 mm LPSS-1810 NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%. * Adhesive models are polycarbonate with neoprene gasket. Snap-on models are constructed of copolyester. EZ-SCREEN(R) Grids and Points Lens Shields-Adhesive Backed Type Lens Shield Length (L) Emitter/Receiver Model Emitter/Receiver Protected Height Point 149 mm SP..1 -- EZS-149 684 mm SG..2-500 500 mm EZS-684 Grid Model 768 mm SG..2-584 584 mm EZS-768 984 mm SG..3-400 800 mm EZS-984 1251 mm SG..3-533 900 mm EZS-1251 1084 mm SG..4-300 1066 mm EZS-1084 Polycarbonate construction with neoprene gasket EZ-SCREEN(R) Type 2 Lens Shields-Adhesive Backed Used With Emitter/Receiver Model Emitter/Receiver Defined Area Lens Shield Length (L) LS2..30-150 150 mm 210 mm LSS-150 LS2..30-300 300 mm 360 mm LSS-300 LS2..30-450 450 mm 510 mm LSS-450 LS2..30-600 600 mm 660 mm LSS-600 LS2..30-750 750 mm 810 mm LSS-750 LS2..30-900 900 mm 959 mm LSS-900 LS2..30-1050 1050 mm 1109 mm LSS-1050 LS2..30-1200 1200 mm 1558 mm LSS-1200 LS2..30-1350 1350 mm 1708 mm LSS-1350 LS2..30-1500 1500 mm 1858 mm LSS-1500 Model Polycarbonate construction with neoprene gasket. LX Lens Shields Used With Installation Adhesive Emitter/Receiver Model Array Length Lens Shield Length (L) LX3 models 67 mm 98.3 mm LXS3 LX6 models 143 mm 174.5 mm LXS6 LX12 models 295 mm 326.9 mm LXS12 Model NOTE: When shields are installed on both the emitter and receiver, maximum operating range is reduced by 20%. 734 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com Laser Alignment Tools 75 mm Accessories online * S implifies the alignment of any emitter/receiver pair * Available for EZ-SCREEN(R), PICO-GUARDTM, LT7, and 18 and 30 mm barrel sensors * Includes a built-in bubble level * Uses one 9-volt battery, which is included (some models) Brackets Cordsets AUTOCAD, STEP, IGES & PDF Retroreflectors Miscellaneous Reference LASER LIGHT LAT - 1 DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. 75 mm Peak Power: 2.8mW, 640-660nm 33kHz 25% duty cycle COMPLIES WITH 21 CFR PART 1040.10 AND EN60825-1; 1994 AVOID EXPOSURE - LASER LIGHT EMITTED FROM THIS APERTURE LAT-1 Laser Alignment Tool (shown without clip) REQUIRES ONE 9V BATTERY REMOVE TWO PHILLIPS SCREWS FOR BATTERY ACCESS BELOW 21 mm Laser Alignment Tools Used With Supply Voltage EZ-SCREEN Grid or Points and PICO-GUARD Grids 9V battery for 20 hours of continuous use EZ-SCREEN 14 & 30 mm Resolution EZ-SCREEN LP 14 & 25 mm Resolution EZ-SCREEN Type 2 EZ-SCREEN Grid or Points, PICO-GUARD Grids, EZ-SCREEN 14 & 30 mm Resolution, EZ-SCREEN LP 14 & 25 mm Resolution and EZ-SCREEN Type 2 PICO-GUARD SFP12 Safety Points 9V battery for 20 hours of continuous use PICO-GUARD SFP30 Safety Points Description LAT-1 with Clip Kit Clip w/Target* LAT-1-HD EZA-LAT-1 LAT-1-SS EZA-LAT-2 LAT-1-LP LPA-LAT-1 LAT-1-LS LSA-LAT-1 LAT-1 - LAT-1-SFP12 SFA-LAT-12 LAT-1-SFP30 SFA-LAT-30 Used With Supply Voltage Model * Allows for long distance alignment greater than 50 m * Clip-on attachment for sensor LT7 -- LAT-2 * Enables easy sensor alignment at long distances * Kit includes one SMB1812 bracket and M12 laser emitter (Class 2 visible red laser) * Clip-on attachment for 18 mm threaded barrel sensors 18 mm threaded barrel sensors 10 to 30V dc LAT1812 * Enables easy sensor alignment at long distances * Kit includes one SMB3012 bracket and M12 laser emitter (Class 2 visible red laser) * Clip-on attachment for 30 mm threaded barrel sensors 30 mm threaded barrel sensors 10 to 30V dc LAT3012 LAT-2 shown with LT7 * LAT-1 purchased separately. information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 735 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS ACCESSORIES BEAM-TRACKERTM Alignment Tool The BEAM-TRACKER is a low-cost, wireless, battery-operated, and completely self-contained photoelectric diagnostic sensor. It is a quick and simple way to evaluate photoelectric system performance. It receives light from all modulated photoelectric emitters and transmits light to receivers to check the system operation. It has a built-in frequency emitter that will be detected by any Banner photoelectric receiver, as well as by those of most other photoelectric manufacturers. It is a valuable tool for locating the center of the beam when installing long-range opposed-mode photoelectric sensor pairs and for locating sources of severe EMI and RFI noise. Supply Voltage Beam Construction Model 9V battery for 10 hours of continuous use 70 kHz infrared Cycolac (R) T case BT-1 Apertures and Aperture Kits Opposed-mode sensors may be fitted with apertures which narrow or shape the effective beam of the sensor to more closely match the size of profile of the object to be sensed. A common example is the use of "line" or "slit" type aperture when wire or thread is being sensed. Aperture Description 736 Units Model Circular, 0.5 mm dia. 6 APQS18-020 Circular, 1.0 mm dia. 6 APQS18-040 Circular, 2.5 mm dia. 6 APQS18-100 Horizontal, slotted, 0.5 x 6.4 mm 6 APQS18-020H Horizontal, slotted, 1.0 x 6.4 mm 6 APQS18-040H Horizontal, slotted, 2.5 x 6.4 mm 6 APQS18-100H Vertical, slotted, 0.5 x 12.7 mm 6 APQS18-020V Vertical, slotted, 1.0 x 12.7 mm 6 APQS18-040V Vertical, slotted. 2.5 x 12.7 mm 6 APQS18-100V Kit with 2 of each aperture 18 APQS18-DVHX2 Circular, 0.5 mm dia. 2 APQ20-0.5 Circular, 1 mm dia. 2 APQ20-1 Circular, 2 mm dia. 2 APQ20-2 Vertical, slotted, 0.5 mm 2 APQ20-0.5V Vertical, slotted, 1 mm 2 APQ20-1V Vertical, slotted, 2 mm 2 APQ20-2V Kit with 2 of each aperture 12 APK-Q20 Circular, 0.5 mm dia. 20 AP31-020 Circular, 1.0 mm dia. 20 AP31-040 Circular, 2.5 mm dia. 20 AP31-100 Horizontal, slotted, 0.5 x 6.4 mm 20 AP31-020H Horizontal, slotted, 1.0 x 6.4 mm 20 AP31-040H Horizontal, slotted, 2.5 x 6.4 mm 20 AP31-100H Horizontal, slotted, 5.1 x 6.4 mm 20 AP31-200H Vertical, slotted, 0.5 x 12.7 mm 20 AP31-020V Vertical, slotted, 1.0 x 12.7 mm 20 AP31-040V Vertical, slotted, 2.5 x 12.7 mm 20 AP31-100V Vertical, slotted, 5.1 x 12.7 mm 20 AP31-200V Kit with 2 of each aperture 22 AP31-DVHX2 Product Used With QS18 Opposed-mode Q20 Opposed-mode MINI-BEAM Opposed-mode More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com More on next page Apertures and Aperture Kits (cont'd) Aperture Description Units Accessories Model Product Used With Kit includes 3 round apertures of: 0.5, 1.0 & 2.5 mm dia. 3 AP18SC* S18 & M18 Kit includes 3 rectangular apertures of: 0.5, 1.0 & 2.5 mm dia. 3 AP18SR* S18 & M18 Kit includes 3 round apertures of: 0.5, 1.0 & 2.5 mm dia. 3 AP18SCN* T18 & YM18 Kit includes 3 rectangular apertures of: 0.5, 1.0 & 2.5 mm dia. 3 AP18SRN* Brackets Cordsets Retroreflectors Miscellaneous Reference T18 & TM18 * Kits include Teflon(R) FEP(R) lens, o-ring and thread-on housing. Kit with glass lens to protect plastic sensor lens from chemical environments 1 APG18S Circular, 0.5 mm dia. 10 APQ12-.5 Circular, 1.0 mm dia. 10 APQ12-1 Circular, 1.5 mm dia. 10 APQ12-1.5 Circular, 2.0 mm dia. 10 APQ12-2 Horizontal, slotted, 0.5 mm dia. 10 APQ12-.5H Horizontal, slotted, 1.0 mm dia. 10 APQ12-1H Vertical, slotted, 0.5 mm dia. 10 APQ12-.5V Vertical, slotted, 1.0 mm dia. 10 APQ12-1V Protective jacket, 4 mm square 10 APQ12-4S Kit containing 2 of each aperture 18 APKQ12 Circular, 2 openings, 0.5 & 1.0 mm dia. 2 APVS2-0204 Circular, 2 openings, 1.5 and 2.0 mm dia. 2 APVS2-0608 Horizontal (1) and vertical (1), slotted, 0.5 mm wide 2 APVS2-02R Horizontal (1) and vertical (1), slotted, 1.0 mm wide 2 APVS2-04R Circular, 1.0 mm dia. 6 APQS30-040 Circular, 2.5 mm dia. 6 APQS30-100 Circular, 5 mm dia. 6 APQS30-200 Horizontal, slotted, 1 x 12 mm 6 APQS30-040H Horizontal, slotted, 2.5 x 12 mm 6 APQS30-100H Horizontal, slotted, 5 x 12 mm 6 APQS30-200H Vertical, slotted, 1 x 17 mm 6 APQS30-040V Vertical, slotted, 2.5 x 17 mm 6 APQS30-100V Vertical, slotted, 5 x 17 mm 6 APQS30-200V Kit with 2 of each aperture 18 APQS30-DVHX2 S18, M18, T18 & TM18 Q12 Opposed-mode VS2 Opposed-mode QS30 Opposed-mode * Teflon(R) is a registered trademark of DupontTM. Ultrasonic Wave Guides Guide attaches to 18 mm threaded barrel of ultrasonic sensors to focus ultrasonic sensing beam. Size Style Model 5.0 mm inside dia. Barrel UWG18-5.0 6.4 mm inside dia. Barrel UWG18-6.4 Used With QS18U S18U information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 737 BRACKETS CORDSETS RETROREFLECTORS MISCELLANEOUS Replacement Lens Assemblies ACCESSORIES Lens assemblies are field-replaceable. In addition, some lenses may be used to convert from one sensing mode to another, or to change the sensing range of a particular sensor. The possible conversions are listed in the table below. Possible Sensing Mode or Range Changes Replacement Lens for Model LVAG Change LV to LVAG UC-300AG W and DBZ Change D to DBZ and F to DBZ UC-300BZ C, CV and CVG Change CV2 to CV UC-300C.7 C2 and CV2 Change CV to CV2 UC-300C2 E and R -- UC-300E EL and RL Extend range of E/R UC-300EL EPD -- UC-300EPD F and FV Change D to F and DBZ to F UC-300F FP (old style) -- UC-300FP FP -- UC-300FP2 LV and D Change F to D, LVAG to LV and DBZ to D UC-300L LP -- UC-300LP RPD -- UC-300RPD E, R, DL, DX and LV UC-45L LL UC-45LL LLP UC-45LLP LP UC-45LP D UC-45D N/A F and FV UC-45F FP UC-45FP CV UC-45C CV4 UC-45C4 CV, CVB and CVG OUC-C D OUC-D F, FAC, FV, FVB, FVG, FX, EF and RF OUC-F N/A FP, FPB and FPG OUC-FP DX, LV, E and R OUC-L LVAG and LVAGC OUC-LAG R58E UC-R55 N/A Used With MINI-BEAM Q45 OMNI-BEAM R58E Portable Demo Box The Portable Demo Box is used to power dc self-contained photoelectric sensors for testing purposes. It is battery-powered and features bicolor LEDs which indicate sensor output status and output type (NPN or PNP). It is designed for a 4-pin Euro-style connector, but cable adapters are available to convert to Pico-style or Mini-style connectors. A 4-pin wiring barrier is mounted on the top of the box to allow connection of cabled dc sensors. Supply Voltage Cable Type Model Cable Adapters Euro-to-Pico p/n 39536 3 - 9V battery 4-pin Euro DBQ5 Euro-to-Mini p/n 39537 738 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com Test Power Supply Accessories Test power supply is a 1 amp power supply used to power P4 sensors and lighting for proving an application without integration into a control panel. Brackets Input Input Trigger Option Model Used With Cordsets Retroreflectors 100-240V ac North America (AC plug) Miscellaneous * 24V dc NPN Sensor * Continuous pulse * Single pulse P4D1 P4 Vision Lighting Reference A-GAGE(R) MINI-ARRAY(R) Series Power Supplies for Heated Enclosures Used With Primary Secondary Models Two BMHE4 Enclosures 105 to 130V ac 23V ac BMHPS4 Two BMHE5 Enclosures 105 to 130V ac 27V ac BMHPS5 Two BMHE6 Enclosures 105 to 130V ac 35V ac BMHPS6 One BMHE4 Enclosure 105 to 130V ac 23V ac BMHPS14 One BMHE5 Enclosure 105 to 130V ac 27V ac BMHPS15 One BMHE6 Enclosure 105 to 130V ac 35V ac BMHPS16 Continuous Power Supplies 12 or 24V dc power supplies provide power to dc sensors, safety products and specialty lights. Input Input Cord Outputs Output Cable Model Used With 100-240V ac 50/60 Hz -- 24V dc @ 4 A max. -- PSDINA-24-4 (DIN-rail mountable) dc Sensors Vision Lights 115/230V ac, 50-60 Hz -- 24V dc (22.5-28.5V dc adj.) @ 2.5 A (60 W) -- PSDINA-24* (DIN-rail mountable) Safety products requiring a SELV rating (EN 60950) * These products are not stocked and are non-returnable. USB Serial Adapter Description Power Model Used With USB to RS-485 serial adapter with integral communication cordset and USB cable for advanced configuration with a PC. USB Cable EZA-USB485-01 EZ-ARRAY USB to RS-485 serial adapter with integral communication cordset and USB cable for easy configuration of a single sensor or a network of sensors. USB Cable INTUSB485-LH LH USB to RS-485 serial adapter for advanced configuration with a PC. NOTE: Communication cordset ordered separately. USB Cable INTUSB485-1 EZ-ARRAY information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 739 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS Power Supplies and Interface Modules ACCESSORIES The power supplies provide a low-cost interface between ac power supply and dc-operated sensors. They can source up to 100 milliamps. All models are available with integral TEACH push button and remote TEACH function. The interface module is a passive module that allows additional status indicators to be located in the user's control cabinet. It provides remote indication and TEACH capability. Description Sensor Input Input Supply Sensor Supply Models PS24-1N NPN 24V ac Power Supply e/m relay output, status lights, and TEACH button PS24-1P PNP 15V dc PS115-1N NPN 115V ac PS115-1P PNP Passive Interface Module Status lights and TEACH button -- 10-30V dc -- SIM-525T Sensor Interface Modules Low-cost modules provide a dc powered interface for sensors. Input Outputs Connections Current Sinking (NPN) 10-30V dc Current Sourcing (PNP) Current Sinking (NPN)/ Current Sourcing (PNP) 10-30V dc Model Two 13-pin Terminals PPSIM-NT One 13-pin Terminals One DB-15 Connector PPSIM-NC Two 13-pin Terminals PPSIM-PT One 13-pin Terminals One DB-15 Connector PPSIM-PC Two 13-pin Terminals IVUSIM Used With PresencePLUS P4 iVu Light Interface Modules Low-cost interface module allows strobe operation of Banner vision lighting with any vision sensor or system. Input Strobe Output 24V dc 5V @ 10 mA max. Model PPLIM Used With Vision lighting EZ-LIGHTTM Controllers * Manually operated controllers for Andon, call-for-parts and machine status indication * Toggle switch model can control up to 5 indicators simultaneously Description Switch Function Supply Voltage ON-OFF-FLASH 30V dc LC80T 5 toggle switches 12-position rotary switch 740 Model LC80R Used With EZ-LIGHT indicators with PNP input More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com AC Emitter/Receiver Interface Boxes Accessories * Provides AC power for up to three receivers or two cascaded emitter/receiver pairs, with external device monitoring (EDM) available. * Supplies +24V dc power at 0.7 amps (16.8 W max. power) and accepts input voltages from 100-250V ac (50-60 Hz). Brackets Safety Outputs EDM Emitter/ Receiver AC Power Connection Connection 3 NO 1 NO & 1 SPDT 1-Channel 8-Pin M12/Euro QD 1 NO & 1 NC PAGE 679 Retroreflectors Miscellaneous Model Used with Reference EZ-SCREEN Hard-wired Hard-wired EZAC-R9-QE8 Hard-wired Hard-wired EZAC-R11-QE8 3-Pin Mini QD 8-Pin Mini QD EZAC-R15A-QE8-QS83 3-Pin Mini QD 5-Pin Mini QD EZAC-R8N-QE8-QS53 3-Pin Mini QD 5-Pin Mini QD EZAC-R10N-QE8-QS53 Selectable 1- or 2-Channel or no EDM 2 NO & 1 NC CORDSETS Output and EDM Connections Cordsets Power Monitoring 2 NO AC Emitter Interface Boxes * Provides AC power for up to four emitters, with external device monitoring (EDM) available. * Supplies +24V dc power at 0.7 amps (16.8 W max. power) and accepts input voltages from 100-250V ac (50-60 Hz). Emitter Connection AC Power Connection 8-Pin M12/Euro QD Hard-wired EZAC-E-QE8 * EZ-SCREEN SLSE..-..Q8 (without Test input) * EZ-SCREEN SLPE.. 5-Pin M12/Euro QD Hard-wired EZAC-E-QE5 * EZ-SCREEN SLSE..-..Q5 (with Test input) 8-Pin M12/Euro QD 3-Pin Mini QD EZAC-E-QE8-QS3 * EZ-SCREEN SLSE..-..Q8 (without Test input) * EZ-SCREEN SLPE.. 5-Pin M12/Euro QD 5-Pin Mini QD EZAC-E-QE5-QS5 * EZ-SCREEN SLSE..-..Q5 (with Test input) Model Used with CORDSETS PAGE 685 NC = Normally Closed, NO = Normally Open AC Interface Box Specifications Visit bannerengineering.com for detailed specifications information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 741 BRACKETS CORDSETS MISCELLANEOUS RETROREFLECTORS Mechanically Linked Contactors* Provides an additional 10 or 18 amp carrying capability to any safety system. ACCESSORIES Coil Voltage Contacts 120V ac 3 NO & 1 NC 24V dc 120V ac 3 NO & 1 NC 24V dc Contact Rating Dimensions (h x w x l) 10 amps 57 x 44 x 58 mm 11-BG00-31-A12060 10 amps (thermal) 57 x 44 x 58 mm 11-BG00-31-D-024 18 amps** 80 x 44 x 80 mm BF1801A-12060 18 amps** (inductive) 80 x 44 x 80 mm BF1801L-024 Model Used With * EZ-SCREEN * PICO-GUARD * SC22-3/-3E NC = Normally Closed, NO = Normally Open, minimum switching current (power): 5 mA @ 17V dc (85 mw) * One Arc Suppressor is needed for each relay across the coil (see below). ** NC contact is rated at 10 amps Auxiliary Contacts for Mechanically Linked Contactors Adds contacts to mechanically linked contactors. Contacts Positively Guided Model Used With 4 NO No (Aux. only) 11-BGX10-40 11-BG Series 3 NO Yes 11-G484-30 BF Series NC = Normally Closed, NO = Normally Open Suppressors for Mechanically Linked Contactors Extends the life of the actuating device--such as a light screen or control module--that uses a mechanically linked contactor. Voltage Model Used With 48V dc 11-BGX77-048 11-BG00-31-D024 125-240V ac 11-BGX77-240 11-BG00-31-A12060 48V dc 11-G318-48 BF1801L-024 125-240V ac BFX77-240 BF1801A-12060 NC = Normally Closed, NO = Normally Open 742 More information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com Task Lights Accessories Brackets Models Cordsets Retroreflectors * Work Light Strip * Work Light * Work Light Area See page 403 Miscellaneous Reference EZ-LIGHTTM Indicators Models * * * * Tower Lights Multi-Color, General-Purpose Multi-Color, Multi-Function Sensor Emulators * * * * * Indicators for Safety devices Call Light Segmented Displays Daylight Visible Traffic Lights See page 427 Indicator Lamps * Indicates whether a switch is open or closed * Available in red or green, 120V ac or 24V ac/dc Supply Voltage Lamp Color Thread Models SI-PL3T-R 24V ac/dc Red SI-PL3A-R 120V ac M20 x 1.5 SI-PL3T-G 24V ac/dc Green SI-PL3A-G 120V ac Used With * SI-QS90 Safety Interlock Switches * SI-LS42 Safety Interlock Switches * SI-QM100 Safety Interlock Switches * RP-LS42 Rope Pull Switches * RP-QM72/QMT72 Rope Pull Switches * RP-RM83 Rope Pull Switches * RP-QM90 Rope Pull Switch Muting Lamps * Indicates when muting is active for optical safety systems with a muting module. * Uses a solid-state LEDs light, eliminating the need to replace bulbs. Supply Voltage Lamp Color Red, Yellow, Green 18-30V dc or 24V ac Overall Height 142.6 mm Models TL50GYRQ TL50YQ Yellow Used with * PICO-GUARD * EZ-SCREEN * Muting Modules 61.2 mm TL50WQ White +24V dc Red Green Yellow (Amber) O 18 mm SSA-ML-A Amber 24V ac/dc m18rgr5pnq 383 mm White (clear) SSA-ML-W information online at bannerengineering.com For Sales and Support, Contact Walker EMD * Toll-free: (800) 876-4444 * Tel: (203) More 426-7700 * Fax: (203) 426-7800 * www.walkeremd.com 743