POWERSEM GmbH, Walpersdorfer Str. 53
91126 D- Schwabach
Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20
2003 POWERSEM reserves the right to change limits, test conditions and dimensions
Fast Recovery PSMD 100E IFAV = 104 A
Epitaxial Diode VRRM = 800-1200V
(FRED) Module
Preliminary Data Sheet
VRSM
V
VRRM
V
Type
800 800 PSMD 100E/08
1000 1000 PSMD 100E/10
1200 1200 PSMD 100E/12
Symbol Test Conditions Maximum Ratings
IFAV TC = 70°C 104 A
IFSM TVJ = 45°C t = 10 ms (50 Hz), sine 1500 A
VR = 0 t = 8.3 ms (60 Hz), sine 1650 A
TVJ = TVJM t = 10 ms (50 Hz), sine 1350 A
VR = 0 t = 8.3 ms (60 Hz), sine 1480 A
∫ i2 dt TVJ = 45°C t = 10 ms (50 Hz), sine 11250 A2 s
VR = 0 t = 8.3 ms (60 Hz), sine 11300 A2 s
TVJ = TVJM t = 10 ms (50 Hz), sine 9110 A2 s
VR = 0 t = 8.3 ms (60 Hz), sine 9090 A2 s
TVJ -40 ... + 150 °C
TVJM 150 °C
Tstg -40 ... + 125 °C
VISOL 50/60 HZ, RMS t = 1 min 2500 V ∼
IISOL ≤ 1 mA t = 1 s 3000 V ∼
Md Mounting torque (M6) 5 Nm
Terminal connection torque (M6) 5 Nm
Weight typ. 270 g
Symbol Test Conditions Characteristic Value
IR VR = VRRM T
VJ = 25°C ≤ 250 µA
VR = VRRM T
VJ = TVJM ≤ 2.5 mA
VF IF = 100 A TVJ = 25°C ≤ 1.55 V
trr
IRM
TVJ = 25°C; IF=1A; -diF/dt=400A/µs
VR= 30V
IF=100A; -diF/dt=200A/µs; VR=100V
L ≤ 0,05 mH; TVJ = 100°C
typ. 100
typ. 48
ns
A
VTO For power-loss calculations only 0.7 V
rT TVJ = TVJM 1.8
mΩ
RthJH per diode; DC current 0.84 K/W
RthJC per diode; DC current 0.65 K/W
dS Creeping distance on surface 10 mm
dA Creeping distance in air 9.4 mm
a Max. allowable acceleration 50 m/s2
Features
• Package with screw terminals
• Isolation voltage 3000 V∼
• Planar glasspassivated chips
• Short recovery time
• Low forward voltage drop
• Short recovery behaviour
• UL registered, E 148688
Applications
• Inductive heating and melting
• Free wheeling diode in converters
and motor control circuits
• Uninterruptible power supplies
(UPS)
• Ultrasonic cleaners and welders
Advantages
• High reliability circuit operation
• Low voltage peaks for reduced
protection circuits
• Low noise switching
• Low losses
Package, style and outline
Dimensions in mm (1mm = 0.0394“)
http://store.iiic.cc/