PolySwitch Resettable Fuses
Short-Form Catalog April 2001
Standard PolySwitch product families include RGE, RHE, RTE, RUE, RXE, SMD, nanoSMD,
microSMD, miniSMD, TS, BBR, TR, LR4, LTP, SRP, TAC, VTP, AHR, AGR, ASMD, and AHS
devices. In addition, special devices, such as speaker devices (SPK), terminal devices (TD) and
custom chip devices, can be manufactured to meet performance requirements that could be
outside of the performance band of the standard products listed in this short-form catalog. Please
contact a Raychem Circuit Protection Customer Service representative to discuss your special
product needs.
Overview
Raychem’s families of PolySwitch
resettable fuses continue to expand to
include devices with wider voltage,
current, and temperature ranges.
Sixteen standard product families of
PolySwitch devices are available in
leaded, axial, and surface mount
configurations. Many have received UL
component recognition and meet the
requirements of other agencies,
including CSA and TÜV.
PolySwitch devices are used in a
wide variety of applications:
Automotive
• Actuators and medium motors
• Trace protection
• Wire harnesses
Battery Protection
• Lithium cells and battery packs
• Rechargeable battery packs
• Chargers
Computers and Peripherals
• DDC.2 computer video ports
• Hard disk drives/storage devices
• IEEE 1394 ports
• Mouse and keyboard ports
• USB (Universal Serial Bus) ports
• PC (PCMCIA) cards and sockets
• SCSI
Industrial
• MOSFET device protection
• Motors, fans, and blowers
• POS equipment
• Process and industrial controls
• Security and fire alarm systems
• Test and measurement equipment
• Transformers
• Medical electronics
Consumer
• Loudspeakers
• Satellite video receivers
Telecommunications & Networking
• Customer premise equipment
• Primary protection: MDF modules,
Network Interface Devices (NIDs)
• Analog modems, ISDN and xDSL
equipment
• WAN, LAN, T1 Equipment
• Access network equipment,
Central Office switches
• Cable power passing taps
• UL 1950, Telcordia GR-1089, GR-974
power fault protection
• ITU-T K.20, K.21, K.45 resistability
requirements
PolySwitch Resettable Fuses
Benefits:
• Reduced warranty and service costs
• Increased reliability
• Superior shock and vibration
withstand
• Automated insertion
• Wide variety of applications
Features:
• Remotely resettable
• Testable
• Solid-state
• Tape and reel
• Variety of form factors
• Low resistance
What’s New Inside:
• nanoSMD Products
• miniSMD Products
• RHE Products
• SRP Products
• VTP Products
• BBR Products
• Auto Products
-AHR
-AGR
-ASMD
-AHS
2
Radial-Leaded Devices for Electronics Applications
60V
33V
This product line can be used in a wide
variety of automotive, computer and general
electronics applications. The RGE devices
feature high current carrying capability (up
to 14 Amps) in a small package with fast
trip times. The RHE devices can be used
at temperatures up to 125°C.
Dimensions (millimeters
/inches
)
Part IH*V max. I max.** R1max. Agency A B C
number (A) (V) (A) (Ω) recognition (max.) (max.) (max.) Fig.
RXE010 0.10 60 40 7.50 UL, TU
¨V, CSA 7.4 11.6
(0.46)
5.08
(0.20) 1
RXE017 0.17 60 40 8.00 UL, TU
¨V, CSA 7.4 12.7
(0.50)
5.08
(0.20) 1
RXE020 0.20 72 40 4.40 UL, TU
¨V, CSA 7.4 11.7
(0.46)
5.08
(0.20) 1
RXE025 0.25 72 40 3.00 UL, TU
¨V, CSA 7.4 12.7
(0.50)
5.08
(0.20) 1
RXE030 0.30 72 40 2.10 UL, TU
¨V, CSA 7.4 12.7
(0.50)
5.08
(0.20) 1
RXE040 0.40 72 40 1.29 UL, TU
¨V, CSA 7.6 13.5
(0.53)
5.08
(0.20) 1
RXE050 0.50 72 40 1.17 UL, TU
¨V, CSA 7.9 13.7
(0.54)
5.08
(0.20) 1
RXE065 0.65 72 40 0.72 UL, TU
¨V, CSA 9.4 14.5
(0.57)
5.08
(0.20) 1
RXE075 0.75 72 40 0.60 UL, TU
¨V, CSA 10.2 15.0
(0.59)
5.08
(0.20) 1
RXE090 0.90 72 40 0.47 UL, TU
¨V, CSA 11.2 15.8
(0.62)
5.08
(0.20) 1
RXE110 1.10 72 40 0.38 UL, TU
¨V, CSA 12.8 17.5
(0.69)
5.08
(0.20) 2
RXE135 1.35 72 40 0.30 UL, TU
¨V, CSA 14.5 19.1
(0.75)
5.08
(0.20) 2
RXE160 1.60 72 40 0.22 UL, TU
¨V, CSA 16.3 20.8
(0.82)
5.08
(0.20) 2
RXE185 1.85 72 40 0.19 UL, TU
¨V, CSA 17.5 22.2
(0.88)
5.08
(0.20) 2
RXE250 2.50 72 40 0.13 UL, TU
¨V, CSA 20.8 28.4
(1.00)
10.2
(0.40) 2
RXE300 3.00 72 40 0.10 UL, TU
¨V, CSA 23.9 28.6
(1.13)
10.2
(0.40) 2
RXE375 3.75 72 40 0.08 UL, TU
¨V, CSA 27.2
(0.29)
(0.29)
(0.29)
(0.29)
(0.29)
(0.30)
(0.31)
(0.37)
(0.40)
(0.44)
(0.50)
(0.57)
(0.64)
(0.69)
(0.82)
(0.94)
(1.07)
31.8
(1.25)
10.2
(0.40) 2
*Hold current 20°C.
**Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
Dimensions (millimeters
/inches
)
Part IH*V max. I max.** R1max. Agency*** AB C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (nom.) Fig.
RTE120 1.20 33 40 0.180 7.4
(0.29)
12.2
(0.48)
5.08
(0.20) 3
RTE135 1.35 33 40 0.143 7.4
(0.29)
14.2
(0.56)
5.08
(0.20) 3
RTE190 1.90 33 40 0.092 8.9
(0.35)
13.5
(0.53)
5.08
(0.20) 3
*Hold current 20°C.
**Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
***CSA is pending for RTE devices.
UL, TU
¨V
UL, TU
¨V
UL, TU
¨V
Lead size
RXE010–090
Ø 0.51 (0.020)
24 AWG
Figure 1
A
B
C
Marking
Lead size
RXE110-375
Ø 0.81 (0.032)
20 AWG
Figure 2
A
B
C
Marking
Lead size
Ø 0.51 (0.020)
24 AWG
Figure 3
A
B
Marking
C
30V
Dimensions (millimeters
/inches
)
Part IH*V max. I max.** R1max. Agency A B C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (nom.) Fig.
RUE090 0.90 30 40 0.22 UL, TÜV, CSA 7.4
(0.29)
12.2
(0.48)
5.08
(0.20) 4
RUE110 1.10 30 40 0.17 UL, TÜV, CSA 7.4
(0.29)
14.2
(0.56)
5.08
(0.20) 4
RUE135 1.35 30 40 0.13 UL, TÜV, CSA 8.9
(0.35)
13.5
(0.53)
5.08
(0.20) 4
RUE160 1.60 30 40 0.11 UL, TÜV, CSA 8.9
(0.35)
15.2
(0.60)
5.08
(0.20) 4
RUE185 1.85 30 40 0.09 UL, TÜV, CSA 10.2
(0.40)
15.7
(0.62)
5.08
(0.20) 4
RUE250 2.50 30 40 0.07 UL, TÜV, CSA 11.4
(0.45)
18.3
(0.72)
5.08
(0.20) 4
RUE300 3.00 30 40 0.08 UL, TÜV, CSA 11.4
(0.45)
17.3
(0.68)
5.08
(0.20) 5
RUE400 4.00 30 40 0.05 UL, TÜV, CSA 14.0
(0.55)
20.1
(0.79)
5.08
(0.20) 5
RUE500 5.00 30 40 0.05 UL, TÜV, CSA 14.0
(0.55)
24.9
(0.98)
10.2
(0.40) 5
RUE600 6.00 30 40 0.04 UL, TÜV, CSA 16.5
(0.65)
24.9
(0.98)
10.2
(0.40) 5
RUE700 7.00 30 40 0.03 UL, TÜV, CSA 19.1
(0.75)
26.7
(1.05)
10.2
(0.40) 5
RUE800 8.00 30 40 0.02 UL, TÜV, CSA 21.6
(0.85)
29.2
(1.15)
10.2
(0.40) 5
RUE900 9.00 30 40 0.02 UL, TÜV, CSA 24.1
(0.95)
29.7
(1.17)
10.2
(0.40) 5
*Hold current 20°C.
**Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
Figure 4
A
B
Marking
C
Lead size
RUE090-250
Ø 0.51 (0.020)
24 AWG
Figure 5
A
B
C
Marking
Lead size
RUE300–900
Ø 0.81 (0.032)
20 AWG
3
Radial-Leaded Devices for Electronics Applications
16V High Temperature
Dimensions (millimeters
/inches
)
Part IH*V max. I max.** R1max. Agency A B C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (nom.) Fig.
RHE450
RHE070
4.5
0.7
16
16
100
40
0.054
0.80
10.4
(0.41)
6.86
(0.27)
15.6
(0.61)
10.8
(0.425)
5.08
(0.20)
5.08
(0.20)
6
7
RHE600 6.0 16 100 0.032 11.2
(0.44)
21.0
(0.83)
5.08
(0.20) 6
RHE650 6.5 16 100 0.026 12.7
(0.50)
22.2
(0.88)
5.08
(0.20) 6
RHE750 7.5 16 100 0.022 14.0
(0.55)
23.5
(0.93)
5.08
(0.20) 6
RHE1000 16 100 0.015 17.5
(0.69)
26.5
(1.04)
10.2
(0.40) 6
RHE1300 16 100 0.010 23.5
(0.925)
28.7
(1.13)
10.2
(0.40) 6
*Hold current 25°C.
**Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
10.0
13.0
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
Figure 6
A
B
C
Marking
Lead size
RHE450-1000
Ø 0.81 (0.032)
20 AWG
Lead size
RHE1300
Ø 1.0 (0.04)
18 AWG
6V
Dimensions (millimeters
/inches
)
Part IH*V max. I max.** R1max. Agency A B C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (nom.) Fig.
RUSB075 0.75 6 40 0.23 UL, TÜV, CSA 6.9
(0.27)
11.4
(0.45)
5.08
(0.20) 10
RUSB120 1.20 6 40 0.14 UL, TÜV, CSA 6.9
(0.27)
11.7
(0.46)
5.08
(0.20) 10
RUSB155 1.55 6 40 0.10 UL, TÜV, CSA 6.9
(0.27)
11.7
(0.46)
5.08
(0.20) 10
*Hold current 20°C.
**Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
Figure 10
Lead size
RUSB-6V products
Ø 0.51 (0.020)
24 AWG
16V
Dimensions (millimeters
/inches
)
Part IHV max. I max.** R1max. Agency A B C
number (A) (V) (A) (Ω) recognition (max.) (max.) (nom.)
RUSB090* 16 40 0.18 UL, TÜV, CSA 12.2
(0.48)
5.08
(0.20) 8
RUSB110* 16 40 0.14 UL, TÜV, CSA 14.2
(0.56)
5.08
(0.20) 8
RUSB135* 16 40 0.115 UL, TÜV, CSA 13.5
(0.53)
5.08
(0.20) 8
RUSB160* 16 40 0.11 UL, TÜV, CSA 15.2
(0.60)
5.08
(0.20) 8
RUSB185* 16 40 0.09 UL, TÜV, CSA 15.7
(0.62)
5.08
(0.20) 8
RUSB250* 16 40 0.06 UL, TÜV, CSA 18.3
(0.72)
5.08
(0.20) 8
RGE300 16 100 0.098 UL, TÜV, CSA 11.0
(0.43)
5.08
(0.20) 9
RGE400 16 100 0.060 UL, TÜV, CSA 12.8
(0.50)
5.08
(0.20) 9
RGE500 16 100 0.034 UL, TÜV, CSA 14.3
(0.56)
5.08
(0.20) 9
RGE600 16 100 0.028 UL, TÜV, CSA 17.1
(0.67)
5.08
(0.20) 9
RGE700 16 100 0.022 UL, TÜV, CSA 19.7
(0.78)
5.08
(0.20) 9
RGE800 16 100 0.0175 UL, TÜV, CSA 20.9
(0.82)
5.08
(0.20) 9
RGE900 16 100 0.0135 UL, TÜV, CSA 21.7
(0.85)
5.08
(0.20) 9
RGE1000 16 100 0.0102 UL, TÜV, CSA 25.2
(0.99)
5.08
(0.20) 9
RGE1100 16 100 0.0089 UL, TÜV, CSA 26.0
(1.02)
5.08
(0.20) 9
RGE1200 16 100 0.0086 UL, TÜV, CSA 28.0
(1.10)
10.2
(0.40) 9
RGE1400
0.90
1.10
1.35
1.60
1.85
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
14.0 16 100 0.0064 UL, TÜV, CSA
11.2
7.4
7.4
8.9
8.9
10.2
11.4
7.1
8.9
10.4
10.7
12.7
14.0
16.5
17.5
17.5
23.5
(0.29)
(0.29)
(0.35)
(0.35)
(0.40)
(0.45)
(0.28)
(0.35)
(0.41)
(0.42)
(0.44)
(0.50)
(0.55)
(0.65)
(0.69)
(0.69)
(0.925)
27.9
(1.10)
10.2
(0.40) 9
*Hold current 20°C.
**Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
Lead size
RUSB090-250
Ø 0.51 (0.020)
24 AWG
Figure 8
Figure 9
Lead size
RGE300-RGE1100
Ø 0.81 (0.032)
20 AWG
Lead size
RGE1200-RGE1400
Ø 1.0 (0.04)
18 AWG
Lead size
RHE070
Ø 0.51 (0.020)
24 AWG
Figure 7
4
TS250
Telecom and Broadband Products
Part IHV max. I max. R min. R max. R1max. Agency
number (A) (Vrms) (A) (Ω)(Ω)(Ω) recognition Fig.
TR250-080T 0.080 250 3.0 22.0 33.0 1
TR250-080U 0.080 250 3.0 14.0 20.0 33.0 1
TR250-110U 0.110 250 3.0 9.0 16.0 1
TR250-120 0.120 250 3.0 8.0 16.0 2
TR250-120T 0.120 250 3.0 12.0 16.0 2
TR250-120T-RA 0.120 250 3.0 9.0 16.0 2
TR250-120T-RC 0.130 250 3.0 7.5 14.0 2
TR250-120T-RF 0.120 250 3.0 10.5 16.0 2
TR250-120T-R1 0.120 250 3.0 9.0 16.0 2
TR250-120T-R2 0.120 250 3.0 10.5 16.0 2
TR250-120U 0.120 250 3.0 10.0 16.0 2
TR250-120UT
TR250-145-RA
TR250-145-RB
TR250-145T
TR250-145U
TR250-180U
0.120
0.145
0.145
0.145
0.145
0.145
0.180
250 3.0 12.0 16.0 2
TR250-145 250 3.0 3.0
7.0
6.0
8.0
6.0
6.0
5.4
7.0
7.0
4.0
5.0
15.0
6.0 14.0 2
*These products are intended for telecom applications. Please see the Raychem Circuit Protection Databook for application details. Products are available in binned versions for
resistance-matched applications. See Raychem Circuit Protection Databook for performance details.
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
250 3.0 5.5 12.0 2
3.0 UL, TÜV, CSA
250 3.0 6.0 12.0 2
4.5 UL, TÜV, CSA
250 3.0 7.5 14.0 2
5.4 UL, TÜV, CSA
250 3.0 6.5 12.0 2
3.5 UL, TÜV, CSA
250 10.0 2.0 4.0 2
0.8 UL, TÜV, CSA
UL, TÜV, CSA
Figure 1 Figure 2
Dimensions (millimeters
/inches
)
Part A B C D E
number (max.) (max.) (max.) (min.) (typ.) Fig.
TR250-080T 5.30
(0.209)
9.9
(0.390)
3.80
(0.15)
4.7
(0.185)
5.00
(0.197)
1
TR250-080U 4.80
(0.189)
9.3
(0.366)
3.80
(0.15)
4.7
(0.185)
5.00
(0.197)
1
TR250-110U 5.33
(0.210)
9.4
(0.370)
3.80
(0.15)
4.7
(0.185)
5.00
(0.197)
1
TR250-120 6.50
(0.256)
11.0
(0.433)
4.60
(0.18)
4.7
(0.185)
5.00
(0.197)
2
TR250-120U 6.00
(0.236)
10.0
(0.394)
3.80
(0.15)
4.7
(0.185)
5.00
(0.197)
2
TR250-145 6.50
(0.256)
11.0
(0.433)
4.60
(0.18)
4.7
(0.185)
5.00
(0.197)
2
TR250-145U 6.00
(0.236)
10.0
(0.394)
3.80
(0.15)
4.7
(0.185)
5.00
(0.197)
2
TR250-180U 10.40
(0.410)
12.6
(0.495)
3.60
(0.14)
4.7
(0.185)
5.00
(0.197)
2
Figure 3
Part IHV max. I max. R min. R max. R1max. Agency
number (A) (Vrms) (A) (Ω)(Ω)(Ω) recognition Fig.
TS250-130 0.130 250/
250(650)0
(650) (1.1)
(1.1)
(1.1)
(1.1)
(650)
(650)
(650)
3.0/ 12.0
12.0
20.0 3
TS250-130-RA 0.130 250/ 3.0/ 6.5
6.5
9.0 20.0 3
TS250-130-RB 0.130 250/ 3.0/ 9.0
7.0
20.0 3
TS250-130-RC-B-0.5 0.130 250/ 3.0/ 10.0 20.0 3
*These products are intended for telecom applications. Please see the Raychem Circuit Protection Databook for application details..
Dimensions (millimeters
/inches
)
Part AB C
number (max.) (max.) (max.) Fig.
TS250-130 9.4
(0.370)
3.4
(0.135)
7.4
(0.290)
3
TS250-130-RA 9.4
(0.370)
3.4
(0.135)
7.4
(0.290)
3
TS250-130-RB 9.4
(0.370)
3.4
(0.135)
7.4
(0.290)
3
TS250-130-RC-B-0.5 9.4
(0.370)
3.4
(0.135)
7.4
(0.290)
3
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
UL, TÜV, CSA
TR250
These product lines consist of radial leaded and
surface mount devices that protect against short
duration high voltage faults (250-600Vrms). TR
and TS products are designed to meet the protec-
tion needs of telecommunications applications.
BBR devices provide overcurrent protection of the
power tap in hybrid-coaxial applications.
TR, TS and BBR devices are not intended for
continuous utility line voltage operation
(i.e. 120v or 240V).
AC
B
E
Marking
φ 0.65mm D
C
B
D
φ 0.65mm
Marking
A
E
C
top view
Marking
DA
B
side view
5
Telecom and Broadband Products
TR600 Figure 4
Dimensions (millimeters
/inches
)
Part A B C D E
number (max.) (max.) (max.) (min.) (max.) Fig.
TR600-150 13.50
(0.531)
12.6
(0.496)
6.00
(0.236)
4.7
(0.185)
5.00
(0.197)
4
TR600-160 16.00
(0.630)
12.6
(0.496)
6.00
(0.236)
4.7
(0.185)
5.00
(0.197)
4
Part IHV max. I max. R min. R max. R1max. Agency
number (A) (Vrms) (A) (Ω)(Ω)(Ω) recognition Fig.
TR600-150 0.150 600 3.0 12.0 22.0 4
TR600-150-RA 0.150 600 3.0 7.0
6.0
10.0 20.0 4
TR600-150-RB 0.150 600 3.0 9.0
4.0
4.0
4.0
22.0 4
TR600-160 0.160 600 3.0 10.0
12.0
18.0 4
TR600-160-RA 0.160 600 3.0 7.0 16.0 4
TR600-160-R1 0.160 600 3.0 8.0 17.0 4
*These products are intended for telecom applications. Please see the Raychem Circuit Protection Databook for application details. Products are available in binned versions for
resistance-matched applications. See Raychem Circuit Protection Databook for performance details.
.
UL, CSA
UL, CSA
UL, CSA
UL, CSA
UL, CSA
UL, CSA
TS600 Figure 5
Part IHV max. I max. R min. R max. R1max. Agency
number (A) (Vrms) (A) (Ω)(Ω)(Ω) recognition Fig.
TS600-170 0.170 600 3.0 9.0 18.0 UL, CSA
UL, CSA
5
TS600-200-RA-B-0.5 0.200 600 3.0 4.0 7.5 13.5 5
*These products are intended for telecom applications. Please see the Raychem Circuit Protection Databook for application details..
Dimensions (millimeters
/inches
)
Part AB C
number (max.) (max.) (max.) Fig.
TS600-170 19.43
(0.765)
12.32
(0.485)
8.26
(0.325)
5
TS600-200-RA-B-0.5 19.43
(0.765)
12.32
(0.485)
8.26
(0.325)
5
4.0
BBR
Part IHV max. I max. R min. R max. R1max. Agency
number (A) (rms) (A) (Ω)(Ω)(Ω) recognition Fig.
BBR550 0.55 90 20 0.45 0.90 1.5 UL, CSA 6
BBR750 0.75 90 20 0.40 0.75 1.2 UL, CSA 6
*These products are intended for telecom applications. Please see the Raychem Circuit Protection Databook for application details.
Dimensions (millimeters
/inches
)
Part ABCD
number (max.) (max.) (nom.) (min.) Fig.
BBR550 10.9
(0.43)
14.0
(0.55)
5.08
(0.2)
7.6
(0.3)
6
BBR750 11.9
(0.47)
15.5
(0.61)
5.08
(0.2)
7.6
(0.3)
6
Figure 6
A
B
D
C
Marking
Lead size
Ø 0.81 (0.032)
20 AWG
New
New
New
New
AC
B
E
Marking
φ 0.65mm D
6
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C D E
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) (min.) (min.) Fig.
microSMD005 0.05 30 10 25.00 50.0 UL, TÜV, CSA 3.43 (0.135) 2.80 (0.111) 0.85 (0.034) 0.30 (0.012) 0.25 (0.010) 1
microSMD035 0.35 6 40 00.81 01.300 UL, TÜV, CSA 3.43 (0.135) 2.80 (0.111) 0.62 (0.025) 0.30 (0.012) 0.25 (0.010) 1
microSMD050 0.50 13.2 40 00.55 00.900 UL, TÜV, CSA 3.43 (0.135) 2.80 (0.111) 0.62 (0.025) 0.25 (0.10) 0.20 (0.008) 1
microSMD075 0.75 6 40 00.29 00.400 UL, TÜV, CSA 3.43 (0.135) 2.80 (0.111) 0.62 (0.025) 0.25 (0.10) 0.20 (0.008) 10
microSMD110 1.10 6 40 00.14 00.210 UL, TÜV, CSA 3.43 (0.135) 2.80 (0.111) 0.48 (0.019) 0.25 (0.10) 0.20 (0.008) 1
microSMD150 1.50 6 40 00.07 00.110 UL, TÜV, CSA 3.43 (0.135) 2.80 (0.111) 1.22 (0.048) 0.30 (0.012) 0.25 (0.010) 1
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C D E
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) (min.) (min.) Fig.
miniSMDC014 0.14 60 10 4.0 6.000 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.89 (0.035) 0.30 (0.012) 0.25 (0.01) 1
miniSMDC020 0.20 30 10 1.4 3.300 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.89 (0.035) 0.30 (0.012) 0.25 (0.01) 1
miniSMDC050 0.50 15 40 0.60 3.300 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.62 (0.025) 0.30 (0.012) 0.25 (0.01) 1
miniSMDC075 0.75 13.2 40 0.26 0.450 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.62 (0.025) 0.30 (0.012) 0.25 (0.01) 1
miniSMDM075 0.75 13.2 40 0.20 0.300 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
miniSMDM075/24 0.75 24 40 0.20 0.290 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
miniSMDC110 1.10 6 40 0.12 0.210 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.62 (0.025) 0.30 (0.012) 0.25 (0.01) 1
miniSMDM110 1.10 8 40 0.12 0.180 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
miniSMDM110/16 1.10 16 40 0.12 0.180 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
miniSMDC125 1.25 6 40 0.09 0.140 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.48 (0.019) 0.25 (0.010) 0.20 (0.008) 1
miniSMDC150 1.50 6 40 0.07 0.110 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 0.48 (0.019) 0.25 (0.010) 0.20 (0.008) 1
miniSMDM160 1.60 8 40 0.066 0.099 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
miniSMDC200 2.00 6 40 0.050 0.070 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 1.22 (0.048) 0.30 (0.012) 0.25 (0.01) 1
miniSMDM200 2.00 8 40 0.040 0.060 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
miniSMDC260 2.60 6 40 0.035 0.047 UL, TÜV, CSA 4.73 (0.186) 3.41 (0.134) 1.25 (0.050) 0.30 (0.012) 0.25 (0.01) 1
miniSMDM260 2.60 8 40 0.030 0.043 UL, TÜV, CSA 4.75 (0.187) 3.60 (0.142) 2.00 (0.079) 1.4 (0.055) —2
This product line is designed for surface-
mount applications. The variety of sizes
enables installation in limited space
applications such as crowded printed
circuit boards, digital cameras, PC cards,
subnotebook computers, computer periph-
eral equipment, and general electronics.
These devices are designed for applica-
tions where such space is constrained
and resettable circuit protection is desired.
microSMD Size: 3225 (mm), 1210 (mils)
New
Surface Mount Devices for Electronic Applications
Figure 1 Figure 2
Coming Soon
Coming Soon
Coming Soon
Preliminary
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C D
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) (min.) Fig.
nanoSMDM050 0.50 6 40 0.40 0.70 pending 3.4 (0.134) 1.8 (0.071) 1.2 (0.048) 0.75 (0.030) 3
nanoSMDM075 0.75 6 40 0.20 0.29 pending 3.4 (0.134) 1.8 (0.071) 1.2 (0.048) 0.75 (0.030) 3
nanoSMDM100 1.00 6 40 0.11 0.21 pending 3.4 (0.134) 1.8 (0.071) 1.2 (0.048) 0.75 (0.030) 3
nanoSMDC150 1.50 6 40 0.08 0.11 pending 3.4 (0.134) 1.8 (0.071) 1.22 (0.050) 0.25 (0.010) 1
C
B
E
D
A
Marking
Top view Side view
E
D
C
B
A
DD
C
B
A
D
D
miniSMD Size: 4532 (mm), 1812 (mils)
New
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C D E
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) (min.) (min.) Fig.
miniSMDE190 1.90 16 100 0.065 0.08 UL, TÜV, CSA 11.51 (0.453) 5.33 (0.210) 0.53 (0.021) 0.51 (0.020) —1
miniSMD Size: 11550 (mm), 4420 (mils)
Figure 3
nanoSMD Size: 3216 (mm), 1206 (mils)
*Hold current, 20°C.
7
SMD
Surface Mount Devices for Electronics Applications
Figure 4
C
A
Side view
B
End view
(midSMD products only)
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) Fig.
SMD030-2018 0.3 60 20 1.40 2.30 UL, TÜV, CSA 5.44 (0.214) 4.93 (0.194) 1.78 (0.07) 4
SMD100-2018 1.10 15 40 0.25 0.400 UL, TÜV, CSA 5.44 (0.214) 4.93 (0.194) 1.52 (0.06) 4
SMD150-2018 1.50 15 40 0.13 0.180 UL, TÜV, CSA 5.44 (0.214) 4.93 (0.194) 1.52 (0.06) 4
SMD200-2018 2.00 6 40 0.07 0.100 UL, TÜV, CSA 5.44 (0.214) 4.93 (0.194) 1.52 (0.06) 4
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) Fig.
SMD150 1.50 15 40 0.16 0.250 UL, TÜV, CSA 9.4 (0.370) 6.6 (0.26) 3.00 (0.118) 4
SMD150/33 1.50 33 40 0.15 0.230 UL, TÜV, CSA 9.4 (0.370) 6.6 (0.26) 3.00 (0.118) 4
SMDH160 1.60 16 70 0.10 0.150 UL, TÜV, CSA 9.4 (0.370) 6.6 (0.26) 3.00 (0.118) 4
SMD185 1.85 33 40 0.12 0.150 UL, TÜV, CSA 9.4 (0.370) 6.71 (0.264) 3.00 (0.118) 4
SMD200 2.00 15 40 0.09 0.125 UL, TÜV, CSA 9.4 (0.370) 6.71 (0.264) 3.00 (0.118) 4
SMD250 2.50 15 40 0.06 0.085 UL, TÜV, CSA 9.4 (0.370) 6.71 (0.264) 3.00 (0.118) 4
SMD2
Dimensions (millimeters/inches)
Part IH*V max. I max. RTyp R1max. Agency A B C
number (A) (Vdc) (A) (Ω)(Ω) recognition (max.) (max.) (max.) Fig.
SMD030 0.30 60 10 3.0 4.800 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.2 (0.125) 4
SMD050 0.50 60 10 0.87 1.400 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.2 (0.125) 4
SMD075 0.75 30 40 0.67 1.000 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.2 (0.125) 4
SMD100 1.10 30 40 0.30 0.480 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.0 (0.118) 4
SMD100/33 1.10 33 40 0.27 0.410 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.0 (0.118) 4
SMD125 1.25 15 40 0.16 0.250 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.0 (0.118) 4
SMD260 2.60 6 40 0.05 0.075 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.0 (0.118) 4
SMD260-RB 2.60 6 40 0.055 0.075 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.0 (0.118) 4
SMD300 3.00 6 40 0.033 0.048 UL, TÜV, CSA 7.9 (0.31) 5.4 (0.21) 3.0 (0.118) 4
B
End view
This product line is also designed for
surface mount applications. The products
range in hold currents from 0.3 Amps to
3.0 Amps and voltages from 6 Volts to
60 Volts. These devices are suited for
high-density board applications in
computer and computer peripheral
products, telecommunications, and general
electronics applications. They are designed
to be reflowed onto a printed circuit board
using standard surface mount processes.
midSMD
8
VTP: 90˚C Activation
Devices for Battery Pack Applications
LTP, miniSMDE, TAC: 110˚C Activation
The conductive polymer composite
in the VTP battery overcurrent
protection devices provides
increased safety with extended
battery run time. These devices
reach a high-resistance state at
lower temperatures in NiMH
and rechargeable lithium
temperature-sensitive chemistries.
Top View Side View
Top View Side View
A
B
C
Slit: 0.5 mm x 4.0 mm
nom.
.02 in x .16 in
Figure 3
Figure 4
A
B
C
Top View Side View
A
B
C
Slit: 0.5 mm x 4.0 mm
nom.
.02 in x .16 in
Figure 5
B
C
A
Figure 6
Top View Side View
R max. Dimensions (millimeters/inches)
Part IH*V max. I max. initial Agency A B C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (max.) Fig.
VTP170 1.7 16 100 0.052 UL, TÜV, CSA 17.5 (0.689) 7.4 (0.292) 0.8 (0.03) 1
VTP170SS 1.7 16 100 0.052 UL, TÜV, CSA 17.5 (0.689) 7.4 (0.292) 0.8 (0.03) 2
VTP170X 1.7 16 100 0.052 UL, TÜV, CSA 22.9 (0.90) 5.3 (0.21) 0.8 (0.03) 3
VTP170XS 1.7 16 100 0.052 UL, TÜV, CSA 22.9 (0.90) 5.3 (0.21) 0.8 (0.03) 3
VTP175L 1.75 16 100 0.051 UL 28.0 (1.10) 3.9 (0.15) 0.8 (0.03) 3
VTP175U 1.75 16 100 0.051 UL 23.2 (0.91) 3.7 (0.15) 0.7 (0.03) 3
VTP200G 2.0 16 100 0.039 UL, TÜV, CSA 23.1 (0.91) 4.5 (0.18) 0.8 (0.03) 3
VTP200U 2.0 16 100 0.039 UL, TÜV, CSA 23.1 (0.91) 4.3 (0.17) 0.7 (0.03) 6
VTP210G 2.1 16 100 0.030 UL, TÜV, CSA 23.1 (0.91) 5.3 (0.21) 0.8 (0.03) 3
VTP210GU 2.1 16 100 0.030 UL, TÜV, CSA 23.2 (0.91) 5.1 (0.20) 0.8 (0.03) 6
VTP210L 2.1 16 100 0.030 UL, TÜV, CSA 26.0 (1.02) 5.3 (0.21) 0.8 (0.03) 3
VTP210S 2.1 16 100 0.030 UL, TÜV, CSA 23.1 (0.91) 5.3 (0.21) 0.8 (0.03) 4
VTP210SL 2.1 16 100 0.030 UL, TÜV, CSA 32.0 (1.26) 5.3 (0.21) 0.8 (0.03) 4
VTP210SL-19.2/5.8 2.1 16 100 0.030 UL, TÜV, CSA 37.0 (1.46) 5.3 (0.21) 0.8 (0.03) 4
VTP210SS 2.1 16 100 0.030 UL, TÜV, CSA 23.1 (0.91) 5.3 (0.21) 0.8 (0.03) 5
VTP210ULD 2.1 16 100 0.030 UL, TÜV, CSA 25.2 (1.00) 5.1 (0.20) 0.8 (0.03) 6
VTP240 2.4 16 100 0.026 CSA UL, (TÜV pending) 26.2 (1.03) 5.3 (0.21) 0.8 (0.03) 3
New
New
New
New
New
New
New
New
New
New
R max. Dimensions (millimeters/inches)
Part IH*V max. I max. initial Agency A B C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (max.) Fig.
LTP
LTP070 0.7 15 100 0.20 UL, TÜV, CSA 22.1 (0.87) 5.2 (0.20) 1.2 (0.048) 1
LTP070S 0.7 15 100 0.20 UL, TÜV, CSA 22.1 (0.87) 5.2 (0.20) 1.2 (0.048) 2
LTP100 1.0 24 100 0.130 UL, TÜV, CSA 23.1 (0.91) 5.2 (0.20) 1.0 (0.04) 1
LTP100S 1.0 24 100 0.130 UL, TÜV, CSA 23.1 (0.91) 5.2 (0.20) 1.0 (0.04) 2
LTP100SL 1.0 24 100 0.130 UL, TÜV, CSA 32.0 (1.26) 5.2 (0.20) 1.0 (0.04) 2
LTP100SS 1.0 24 100 0.130 UL, TÜV, CSA 23.1 (0.91) 5.2 (0.20) 1.0 (0.04) 3
LTP180 1.8 24 100 0.068 UL, TÜV, CSA 26.0 (1.02) 5.2 (0.20) 1.0 (0.04) 1
LTP180L 1.8 24 100 0.068 UL, TÜV, CSA 37.5 (1.48) 5.2 (0.20) 1.0 (0.04) 1
LTP180S 1.8 24 100 0.068 UL, TÜV, CSA 26.0 (1.02) 5.2 (0.20) 1.0 (0.04) 2
LTP190 1.9 24 100 0.057 UL, TÜV, CSA 23.4 (0.92) 11.0 (0.43) 1.1 (0.04) 1
LTP260 2.6 24 100 0.042 UL, TÜV, CSA 26.0 (1.02) 11.9 (0.47) 1.0 (0.04) 1
LTP300 3.0 24 100 0.031 UL, TÜV, CSA 31.8 (1.25) 13.5 (0.53) 1.1 (0.04) 1
LTP340 3.4 24 100 0.027 UL, TÜV, CSA 26.0 (1.02) 15.9 (0.63) 1.0 (0.04) 1
miniSMDE
miniSMDE190 1.9 16 100 0.040 UL, TÜV, CSA 11.51 (0.453) 5.33 (0.21) 0.53 (0.021) 4
TAC
TAC100-09 1.0 15 50 0.155 UL 17.5 (0.69) 10.5 (0.45) 0.9 (0.04) 5
Top View Side View
Figure 1
A
B
C
Slit: 0.5 mm x 4.0 mm nom.
.02 in x .16 in
Figure 2
A
B
C
A
B
C
Slit: 0.5 mm x 4.0 mm
nom.
.02 in x .16 in
Figure 3
A
B
C
Figure 5
Figure 4
C
B
E
D
A
Marking
E
D
LTP and TAC devices provide reliable,
noncycling protection for rechargeable
batteries. LTP devices also offer additional
protection at elevated temperatures. The
TAC devices’unique cap design makes
them easy to install directly on AAA size
battery cells.
Figure 1
A
B
C
Top View Side View
B
A
Top View Side View
Figure 2
Top View Side View Top View Side View
Top View Side View Top View Side View
9
Devices for Battery Pack Applications
LR4, SRP, TAC: 120˚C Activation
R max. Dimensions (millimeters/inches)
Part IH*V max. I max. initial Agency A B C
number (A) (Vdc) (A) (Ω) recognition (max.) (max.) (max.) Fig.
LR4
LR4-170U 1.7 15 100 0.078 Pending 21.0 (0.83) 4.0 (0.16) 0.7 (0.03) 3
LR4-190 1.9 15 100 0.072 UL, TÜV, CSA 22.1 (0.87) 5.5 (0.22) 1.0 (0.04) 1
LR4-190S 1.9 15 100 0.072 UL, TÜV, CSA 22.1 (0.87) 5.5 (0.22) 1.0 (0.04) 2
LR4-260 2.6 15 100 0.042 UL, TÜV, CSA 23.1 (0.91) 5.5 (0.22) 1.0 (0.04) 1
LR4-260S 2.6 15 100 0.042 UL, TÜV, CSA 23.1 (0.91) 5.5 (0.22) 1.0 (0.04) 2
LR4-380 3.8 15 100 0.026 UL, TÜV, CSA 26.0 (1.02) 7.5 (0.30) 1.0 (0.04) 1
LR4-450 4.5 20 100 0.020 UL, TÜV, CSA 26.0 (1.02) 10.5 (0.41) 1.0 (0.04) 1
LR4-550 5.5 20 100 0.016 UL, TÜV, CSA 37.0 (1.46) 7.5 (0.30) 1.0 (0.04) 1
LR4-600 6.0 20 100 0.014 UL, TÜV, CSA 26.0 (1.02) 14.5 (0.57) 1.0 (0.04) 1
LR4-730 7.3 20 100 0.012 UL, TÜV, CSA 29.1 (1.15) 14.5 (0.57) 1.0 (0.04) 1
SRP
SRP120 1.2 15 100 0.160 UL, TÜV, CSA 22.1 (0.87) 5.2 (0.20) 1.0 (0.04) 4
SRP120L 1.2 15 100 0.160 UL, TÜV, CSA 27.1 (1.07) 5.2 (0.20) 1.0 (0.04) 4
SRP120S 1.2 15 100 0.160 UL, TÜV, CSA 22.1 (0.87) 5.2 (0.20) 1.0 (0.04) 5
SRP175 1.75 15 100 0.090 UL, TÜV, CSA 23.1 (0.91) 5.2 (0.20) 1.0 (0.04) 4
SRP175L 1.75 15 100 0.090 UL, TÜV, CSA 32.1 (1.26) 5.2 (0.20) 1.0 (0.04) 4
SRP175S 1.75 15 100 0.090 UL, TÜV, CSA 23.1 (0.91) 5.2 (0.20) 1.0 (0.04) 5
SRP175SS 1.75 15 100 0.090 UL, TÜV, CSA 23.1 (0.91) 5.2 (0.20) 1.0 (0.04) 6
SRP200 2.0 30 100 0.060 UL, TÜV, CSA 23.4 (0.92) 11.0 (0.43) 1.1 (0.04) 4
SRP350 3.5 30 100 0.031 UL, TÜV, CSA 31.8 (1.25) 13.5 (0.53) 1.1 (0.04) 4
SRP420 4.2 30 100 0.024 UL, TÜV, CSA 32.4 (1.28) 13.6 (0.54) 1.1 (0.04) 4
TAC
TAC170-09 1.7 15 50 0.098 UL 17.5 (0.69) 10.5 (0.42) 0.9 (0.04) 7
TAC210 2.1 15 50 0.062 UL, TÜV, CSA 17.5 (0.69) 10.5 (0.42) 0.9 (0.04) 7
New
New
Top View Side View Top View Side View
A
B
C
A
B
C
Slit: 0.5 mm x 4.0 mm
nom.
.02 in x .16 in
Figure 2
Top View Side View
B
C
A
Figure 3
Figure 1
A
B
C
Slit: 0.5 mm x 4.0 mm
nom.
.02 in x .16 in
Top View Side View Top View Side View
A
B
C
Figure 4 Figure 5
A
B
C
Slit: 0.5 mm x 4.0 mm
nom.
.02 in x .16 in
Top View Side View
Figure 6
A
B
C
Figure 7
The LR4 devices’smaller thermal
mass means reduced reaction
time to overcurrent events. The
LR4 devices are suited for battery
packs intended for computer and
camcorder applications. The
SRP products provide reliable,
noncycling protection for recharge-
able batteries. Weldable nickel
leads and a narrow, low-profile
design make these devices easy
to install directly onto battery cells.
Top View Side View
10
Dimensions (millimeters/inches)
Part IH* (A) IH* (A) V max. I max. R min. R1max. Ramax. ABC
number R1max. Ramax. (Vdc) (A) (Ω)(Ω)(Ω) (max.) (max.) (typ.) Fig.
AGR400 4.0 3.0 16 100 0.0186 0.061 0.085 8.9 (0.35) 14.1 (0.56) 5.08 (0.2) 1
AGR500 5.0 4.3 16 100 0.0140 0.034 0.048 10.4 (0.41) 15.6 (0.61) 5.08 (0.2) 1
AGR600 6.0 5.3 16 100 0.0095 0.028 0.032 10.7 (0.42) 18.4 (0.73) 5.08 (0.2) 1
AGR700 7.0 6.5 16 100 0.0066 0.020 0.022 11.2 (0.44) 21.0 (0.83) 5.08 (0.2) 1
AGR800 8.0 7.6 16 100 0.0049 0.0175 0.0181 12.7 (0.50) 22.2 (0.88) 5.08 (0.2) 1
AGR900 9.0 8.6 16 100 0.0041 0.0135 0.0140 14.0 (0.55) 23.0 (0.91) 5.08 (0.2) 1
AGR1000 10.0 9.6 16 100 0.0034 0.0102 0.0106 16.51 (0.65) 25.7 (1.01) 5.08 (0.2) 1
AGR1100 11.0 10.5 16 100 0.0033 0.0089 0.0093 17.5 (0.69) 26.5 (1.04) 5.08 (0.2) 1
AGR1200 12.0 11.5 16 100 0.0030 0.0086 0.0091 17.5 (0.69) 28.8 (1.14) 10.20(0.4) 1
AGR1400 14.0 13.0 16 100 0.0022 0.0064 0.0067 23.5 (0.925) 28.7 (1.13) 10.20(0.4) 1
These product lines are qualified to
operate in Automotive environments and
are compliant with QS-9000 AEC and
Raychem Circuit Protection specified
PS400.
Figure 3
Devices for Automotive Applications
AHR: High Temp Radial Leaded
Dimensions (millimeters/inches)
Part IH* (A) IH* (A) V max. I max. R min. R1max. Ramax. ABC
number R1max. Ramax. (Vdc) (A) (Ω)(Ω)(Ω) (max.) (max.) (typ.) Fig.
AHR450 4.5 4.5 16 100 0.0170 0.054 0.054 10.4 (0.41) 15.6 (0.61) 5.08 (0.2) 2
AHR600 6.0 6.0 16 100 0.0100 0.032 0.032 11.2 (0.44) 21.0 (0.83) 5.08 (0.2) 2
AHR650 6.5 6.5 16 100 0.009 0.026 0.026 12.7 (0.50) 22.2 (0.88) 5.08 (0.2) 2
AHR750 7.5 7.5 16 100 0.0074 0.022 0.022 14.0 (0.55) 23.5 (0.93) 5.08 (0.2) 2
AHR1000 10.0 10.0 16 100 0.0051 0.015 0.015 17.5 (0.69) 26.5 (1.04) 10.20(0.4) 2
AHR1300 13.0 13.0 16 100 0.0034 0.010 0.010 23.5 (0.925) 28.7 (1.13) 10.20(0.4) 2
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
AHS: High Temp Surface Mount
Dimensions (millimeters/inches)
Part IH* (A) IH* (A) V max. I max. R min. R1max. Ramax. ABC
number R1max. Ramax. (Vdc) (A) (Ω)(Ω)(Ω) (max.) (max.) (typ.) Fig.
AHS080-2018 0.8 0.8 16 70 0.170 0.550 0.550 5.44 (0.214) 4.93 (0.194) 1.52 (0.060) 3
AHS160 1.60 1.6 16 70 0.050 0.150 0.150 9.40 (0.370) 6.60 (0.260) 3.00 (0.118) 3
New
New
ASMD: Surface Mount
Dimensions (millimeters/inches)
Part IH* (A) IH* (A) V max. I max. R min. R1max. Ramax. ABC
number R1max. Ramax. (Vdc) (A) (Ω)(Ω)(Ω) (max.) (max.) (typ.) Fig.
ASMD030 0.23 0.23 60 10 0.98 4.800 4.80 7.9 (0.31) 5.4 (0.21) 3.2 (0.125) 3
ASMD050 0.39 0.39 60 10 0.029 1.400 1.40 7.9 (0.31) 5.4 (0.21) 3.2 (0.125) 3
ASMD075 0.60 0.60 30 40 0.029 1.000 1.00 7.9 (0.31) 5.4 (0.21) 3.2 (0.125) 3
ASMD100 0.90 0.90 30 40 0.098 0.480 0.48 7.9 (0.31) 5.4 (0.21) 3.00 (0.118) 3
ASMD125 1.04 1.04 15 40 0.057 0.250 0.25 7.9 (0.31) 5.4 (0.21) 3.00 (0.118) 3
ASMD150 1.27 1.27 15 40 0.049 0.250 0.25 9.4 (0.370) 6.60 (0.260) 3.00 (0.118) 3
ASMD200 1.73 1.73 15 40 0.05 0.120 0.120 9.4 (0.370) 6.71 (0.264) 3.00 (0.118) 3
ASMD250 1.97 1.97 15 40 0.035 0.085 0.085 9.4 (0.370) 6.71 (0.264) 3.00 (0.118) 3
New
New
New
New
New
New
New
New
C
A
Side view
B
End view
B
End view
(AHS080 only)
AGR: Radial Leaded
Figure 1
Lead size
Ø 0.81 (0.032)
20 AWG
A
B
C
Marking
Lead size
AGR1200-1400
Ø 1.0 (0.04)
18 AWG
C
A
B
Marking
Figure 2
Lead size
AGR400-1100
Ø 0.81 (0.032)
20 AWG
11
•Operation beyond maximum ratings or
improper use may result in device
damage and possible electrical arcing
and flame.
•These devices are intended for protection
against occasional overcurrent or
overtemperature fault conditions, and
should not be used when repeated fault
conditions are anticipated.
•TR and TS devices are not intended for
continuous utility line voltage such as
120/220 V or 240 V.
WARNING!
Agency approvals for PolySwitch devices:
PolySwitch devices, where appropriate,
have been tested and have gained the
following safety agency approvals:
•UL Component Recognition in Category
XGPU2, Thermistor Type Devices
•CSA Component Acceptance Class
9073 32, Thermistors—PTC Type
•TU
¨V Rheinland Certification, PTC
Resistors
®
Voltage Rating for Telecom Devices
For Raychem Circuit Protection telecom
devices (TC, TGC, TRx, TSx) there are
two applicable voltage ratings. These are
Vmax. Operating and Vmax. Interrupt.To
help understand the nature of these two
different voltage ratings the following
definitions are provided:
Vmax. Interrupt: Under specified
conditions this is the highest voltage that
can be applied to the device at the
maximum current. Devices have been
designed to trip safely under higher power
level cross conditions, as listed above, to
assist equipment in meeting the
appropriate industry conditions.
Vmax. Operating: For telecom devices
this is the voltage we have used to obtain
component recognition under UL1434.
Raychem Circuit Protection devices
(TC, TGC, TRx, TSx) are certified at 60V
but can withstand higher Vmax. Interrupt
conditions as noted above.
For the purposes of this brochure we have
included in the table of electrical ratings
the more applicable Vmax. Interrupt value.
Definitions
IH= Hold current—maximum current at
which the device will not trip under
specified conditions.
Imax. = The highest fault current that can
safely be used to trip a PolySwitch device
under specified conditions.
Vmax. = The highest voltage that can
safely be dropped across a PolySwitch
device in its tripped state under specified
fault conditions.
R1max. = Maximum device resistance
under specified conditions measured
1 hour post trip or post reflow.
Ramax. = Maximum device resistance
under automotive conditions specified in
PS400 measured 1 hour after stress has
been removed.
Rmax. Initial = Maximum device
resistance under specified conditions
as supplied.
Trip Current = Minimum current at
which a device will trip under specified
conditions.
PolySwitch, SiBar, miniSMD, microSMD, and nanoSMD are trademarks of Tyco Electronics Corporation.
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of
each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information,
and disclaims any liability regarding its use. Tyco Electronics' only obligations are those in the Company's Standard Terms and
Conditions of Sale for this product, and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential
damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In
addition, Tyco Electronics reserves the right to make changes-without notification to Buyer-to materials or processing that do
not affect compliance with any applicable specification.
South America
Argentina
Tel 54-11-4394-5150
Fax 54-11-4326-9985
Brazil
Tel 55-11-816-0066
Fax 55-11-816-0301
Chile
Tel 56-2-209-8211
Fax 56-2-223-1477
Colombia
Tel 57-1-218-2460
Fax 57-1-218-2472
Peru
Tel 51-1-221-4165
Fax 51-1-421-0368
Uruguay
Tel 59-8-982-2428
Fax 59-8-982-2430
Venezuela
Tel 58-2-242-6475
Fax 58-2-241-8260
Europe
UK/EIRE/
Nordic Countries
Tel (44)-1793-572-244
Fax (44)-1793-573-178
Germany/Austria/
Switzerland/
Eastern Europe
Tel (49)-89-608-9386
Fax (49)-89-608-9394
France/Benelux/
Italy/Iberia
Tel (33)-1-3440-7289
Fax (33)-1-3440-7288
Other Countries
Tel (32)-16-351-321
Fax (32)-16-351-319
Asia/Pacific
Australia, Sydney
Tel 61-2-9890-3944
Fax 61-2-9890-3977
China, Beijing
Tel 86-10-6581-5606
Fax 86-10-6581-5608
China, Guangzhou
Tel 86-20-8330-9933
Fax 86-20-8385-6139
China, Hong Kong
Tel 852-2738-3401
Fax 852-2735-1185
China, Shanghai
Tel 86-21-6485-3288
Fax 86-21-6485-5109
India, Bangalore
Tel 91-80-559-1485
Fax 91-80-558-6039
Japan
Tel 81-44-900-5110
Fax 81-44-900-5140
Korea
Tel 82-2-3415-4654
Fax 82-2-3486-1786
Malaysia
Tel 6-04-644-0931
Fax 6-04-644-9521
Philippines
Tel 63-2-867-8641
Fax 63-2-867-8661
Singapore
Tel 65-486-6126
Fax 65-484-0661
Taiwan
Tel 886-2-2662-9788
Fax 886-2-2662-4684
Thailand
Tel 66-2-617-1938
Fax 66-2-617-1939
www.circuitprotection.com
www.circuitprotection.com.hk (Chinese)
www.raychem.com/go/jpn/polyswitch (Japanese)
Worldwide Headquarters
308 Constitution Drive
Menlo Park, CA 94025-1164
Tel (800) 227-7040
(650) 361-6900
Fax (650) 361-2508
2001 Tyco Electronics Corporation. Printed in USA. RCP0014.0401.5000