Amphenol (R) High Frequency Contacts for Multi-pin Connectors HIGH PERFORMANCE CONNECTORS AND CONTACTS PROVIDE SECURE, RELIABLE DATA TRANSMISSION 12-130-4 Leading in the electrical connection arena, Amphenol products are used on major programs of military and commercial aircraft, military ground vehicles, space applications, missiles/ordnance, and C4ISR equipment. CONCENTRIC TWINAX COAXIAL TRIAX AX R AD U Q Amphenol Corporation Amphenol Aerospace Operations 40-60 Delaware Avenue, Sidney, New York 13838-1395 Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157 www.amphenol-aerospace.com RS DAPTE A N IO NSIT A R .T TS C A T ON C X INA W T IAL T EN R FE DIF TWINAX PC TAIL DIFFERENTIAL TWINAX S. T C TA N CO AMPHENOL'S WIDE RANGE OF CONTACTS MEET THE DEMANDS OF MILITARY AND AEROSPACE APPLICATIONS. Amphenol Aerospace Amphenol High Frequency Contacts TABLE OF CONTENTS CONCENTRIC TWINAX COAXIAL "Split-Pair" Quadrax Contact & Cable TWINAX PC TAIL TRIAX DIFFERENTIAL TWINAX QUADRAX * Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . 2 * Overview of Amphenol's High Frequency Contacts . . . . . . . . . . 3-7 * Cable Systems. . . . . . . . . . . . . . . . . . . . . . . . . 8 * Cable Usage Guide . . . . . . . . . . . . . . . . . . . . . .9-12 MIL-DTL-38999 Circular Connector Overview . . . . . . . . . . . . 13 Contacts for MIL-DTL-38999 Connectors: * Quadrax Contacts. . . . . . . . . . . . . . . . . . . . . . 14-16 * New "Split-Pair" Quadrax Contacts. . . . . . . . . . . . . . . 17-20 * Differential Twinax Contacts. . . . . . . . . . . . . . . . . . 21, 22. Compliant Quadrax and PC Tail Quadrax Contacts . . . . . . . . . . 23 * Quadrax Transition & Differential Twinax Transitional Adapters. . . . . 24-26 * Differential Twinax Transition Adapters . . . . . . . . . . . . . . . 27 * Micro D-Twinax Transition Adapters . . . . . . . . . . . . . . . 28-30 * Insert Arrangements for MIL-DTL-38999, Series III . . . . . . . . . 31, 32 * How to Order 38999 Series III with Quadrax 100 ohm Contacts. . . . . 33 * Coaxial Contacts. . . . . . . . . . . . . . . . . . . . . . 34-37 * Matched Impedance Coaxial Contacts. . . . . . . . . . . . . . . 38 * Typical Contact Installation Instructions for Coax Contacts . . . . . . . 39 * High Frequency Contacts (DC to 40 GHz) . . . . . . . . . . . . . . 40 * Twinax Contacts. . . . . . . . . . . . . . . . . . . . . . . 41-43 * Triax Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 44 * Coax, Twinax & Triax PC Tail Contacts . . . . . . . . . . . . . . 45-47 * Insert Patterns for MIL-DTL-38999 Series III Incorporating Coax, Twinax and Triax Contacts . . . . . . . . . . . . . . . . . . . . . . 48-50 Standard MIL-DTL-5015 & Heavy Duty MIL-DTL-22992 Circular Connector Overview. . . . . . . . . . . . . . . . . . . . . Contacts for Standard MIL-DTL-5015 & Heavy Duty MIL-DTL-22992 Connectors: * Coaxial Contacts. . . . . . . . . . . . . . . . . . . . . . * Insert Patterns for Standard MIL-DTL-5015 and Heavy Duty MIL-DTL-22992 Incorporating Coax Contacts . . . . . . . . . . . * Rectangular Rack & Panel Connectors that incorporate High Speed. . . . 51 52, 53 . 54 55, 56 * Additional Contact Styles from Amphenol . . . . . . . . . . . . . . 57 * Guide for Selecting High Frequency Contacts and Cables. . . . . . . . 58 High Frequency Contacts Typical Markets: * * * * Military & Commercial Aviation Military Vehicles Missiles & Ordnance C4ISR Amphenol Aerospace Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 2 Amphenol(R) High Frequency Contacts Provide High Speed Transmission and Operate in High Frequency Conditions Amphenol Aerospace When you need superior electrical performance plus shielding to eliminate interference from outside electrical sources in a connector, Amphenol has the most reliable contact solutions. Amphenol offers a very wide range of contacts that provide high speed transmission and operate in high frequency conditions. You can be assured of interconnection compatibility when you come to Amphenol for your contact needs as well as your connector needs. Amphenol's expertise in interconnection solutions assures that your contacts will mate properly and will perform to the application specifications of your particular requirements. MIL-DTL-38999 CONNECTORS - The high performance series most ideal for integrating high speed and high frequency contacts. MIL-DTL-38999, Series I, II and III are by far the choice of connector for today's avionics needs - these subminiature family connectors are ideally suited for the incorporation of shielded contacts. This catalog section is primarily devoted to the high speed and high frequency contact options for use in MIL-DTL-38999 Connectors, which include: Coaxial Concentric Twinax Triax Quadrax Differential Twinax High Frequency Transition Adapters Pin and socket contacts designed for RF/microwave and shielded wire applications. Sizes 4, 8, 12 & 16 Pin and socket contacts designed for protection from magnetic and electrostatic interference including nuclear electromagnetic pulse. Sizes 8 & 12 Pin and socket contacts designed for shielded wire applications with 3 conductors. Sizes 8, 10 & 12 Size 8 pin and socket contacts. An outer contact with 4 strategically spaced inner contacts forming two 100 or 150 Ohm matched impedance differential pairs. Size 8 pin and socket contacts. An outer contact with 2 inner contacts spaced to form one 100 or 150 Ohm matched impedance differential pair. Size 8 Coaxial contacts that provide high frequencies (DC to 40 GHz). Unique "Float Mount" technology maintains tight mechanical tolerances. Matched impedance quadrax and twinax transition adapters provide a method of launching from the high speed connectors to PCB boards. Other series of connectors from Amphenol Aerospace, in addition to 38999 connectors, can incorporate shielded contacts. These include the following (and are also covered in this catalog section): * Amphenol(R) Heavy Duty Circular Connectors, MIL-DTL-22992 with coax contacts. * Amphenol(R) Printed Circuit Board Connectors - Rectangular connectors with standard low mating force brush contacts can have hybrid arrangements with coax contacts. * LRM Interconnects - Rectangular module and backplane connectors with standard low mating force brush contacts can have hybrid arrangements with coax contacts. * Amphenol(R) ARINC 600 and R27 Rack & Panel Connectors are available with quadrax, coax, twinax and differential twinax contacts. See High Frequency Contact Designer's Guide at end of this catalog. The Cable Usage Guide is a key reference to help guide you in selecting the contacts best suited to your needs. Since most shielded wire applications start with a fixed requirement for cable types, the guide refers you to the Amphenol connector family utilizing contacts which are compatible with the cable characteristics. For more information on other Amphenol connectors with shielded contacts: * Amphenol(R) Circular Connectors, MIL-DTL-26482, Series 1 are available with coaxial contacts, size 8 and 12 for crimp and solder type. See catalog 12-070 on-line at www.amphenol-industrial.com, or consult Amphenol Industrial Operations. * Amphenol(R) MS/Standard, MIL-DTL-5015 Circular Connectors are available with size 4, 8 and 12 coax contacts. Consult Amphenol Industrial Operations for more information or on-line at www.amphenol-industrial.com. For more information on connectors with fiber optics see the Fiber Optic section of this catalog or consult Amphenol Aerospace, Sidney, NY. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 3 Amphenol Aerospace High Speed Quadrax and Differential Twinax Contacts Differential Twinax and Quadrax contacts provide high data transfer rates, low power consumption, and excellent EMI capability. They offer controlled impedance of 100 or 150 Ohm and are ideal for use in harsh environments. Amphenol provides the latest technology in high speed contacts - differential twinax and quadrax contacts, size 8, for use in MIL-DTL-38999 Special* Circular Connectors. DIFFERENTIAL TWINAX CONTACTS High speed Differential Twinax contacts consist of an outer contact with two inner contacts spaced to form one 100 or 150 Ohm controlled impedance differential pair. See pages 385 and 386 for performance data and ordering of Differential Twinax contacts, and consult Amphenol Aerospace for more information. D38999 Series III Ground Plane Connectors with Quadrax PCB Socket contacts Differential Twinax Contact QUADRAX CONTACTS * High speed Quadrax contacts consist of an outer contact with four inner contacts spaced to form two 100 or 150 Ohm controlled impedance differential pair. * Both contacts, when used in Amphenol MIL-DTL-38999 Series III and ARINC type connectors, provide an excellent alternative for harsh environment applications such as: * Ethernet 100 Base-T-100 Ohm * Gigabit Ethernet 1000 Base-T-100 Ohm * Fibre Channel-150 Ohm * IEEE1394B FireWire-110 Ohm Quadrax Contact Differential Twinax and Quadrax contact options include: * Crimp or printed circuit board termination * Established designs to accommodate a variety of cable types and gages * Ground plane connectors can incorporate quadrax contacts. These connections have conductive inserts that ground the outer conductor of the contact body to the shell of the connector. They accommodate size 8 and 12 shielded contacts of which the size 8 can be quadrax type. See pages 378-380 for performance data of Quadrax contacts. Consult Amphenol Aerospace for further information needed. D38999 Series III with Quadrax and Power Contacts D38999 Series III Connectors (standoff shell at right and standard shell below) with Quadrax PC Tail Contacts * Requires modified connector to accommodate keyed contacts. 4 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Quadrax Contacts, Quadrax Terminators, Transition Adapters QUADRAX CONTACTS FOR ARINC CONNECTORS Board Level Connector with Compliant Quadrax Contacts Amphenol ARINC 600 Rack and Panel connectors can incorporate high speed quadrax contacts as well as coax, twinax and differential twinax contacts. R27 Rack and Panel connectors use the same contacts as ARINC 600 connectors. For more information about rack and panel connectors contact Amphenol Aerospace, Sidney, NY. Quadrax Contact for ARINC Connectors BOARD LEVEL CONNECTORS WITH COMPLIANT QUADRAX CONTACTS Amphenol also provides compliant quadrax socket contacts and Quadrax pin contacts with PC tails for attaching to printed circuit boards. See page 387 for more information. Compliant Quadrax Socket and PCB Tail Quadrax Pin FEED-THROUGH CONNECTOR WITH QUADRAX CONTACTS Amphenol's feed-through connector is double-ended for through bulkhead applications. Consult Amphenol for more information. Straight Quadrax Receptacle Contact 90 Quadrax Receptacle and Plug Transition Adapter Quadrax Terminators Amphenol offers a terminator assembly which is a low reactance, resistive impedance match to the characteristic impedance of a transmission line. It is used to terminate the far ends of a transmission line or an open tap so that the energy from signals traveling down the transmission line is absorbed within the resistor and not reflected back down the transmission line causing signal interference (noise). Consult Amphenol for more information. Quadrax Terminator Transition Adapters In conjunction with its Differential Twinax and Quadrax contacts, Amphenol has developed a full line of Transition Adapters in order to facilitate launching of controlled impedance signals to printed circuit boards. These use differential twinax or quadrax 90 or straight receptacles and they can be either threaded or cable to board direct. The threaded transition adapters provide an ideal method of disconnecting the differential twinax or quadrax connector from the board. 90 Differential Twinax Receptacle and Plug Transition Adapter See pages 388-390 for further description, performance data and ordering of transition adapters. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 5 Amphenol Aerospace High Speed Coax and Twinax Contacts Optional choices, other than standard crimp or solder 500 cycle and 1500 cycle contacts, are often required for high frequency interconnections. Amphenol offers shielded contacts for RF applications as well as balanced high sensitivity circuits. Amphenol(R) Shielded Contacts provide design versatility for electrical circuitry. Shielded contacts are used to eliminate interference from outside electrical sources, when standard crimp or solder contacts are not enough. SHIELDED COAXIAL CONTACTS High speed Coax contacts within a connector provide the shielding protection, and many cases the RF/microwave performance, needed in the circuitry of many applications. Shielded Coax Contacts All popular series of Amphenol circular connectors and many rectangular connectors are available with coax contacts. Diameters are standardized in sizes 4, 8, 12 and 16 so that coaxial contacts may be interchanged with power contacts in connector arrangements which include those sizes. Popular RG cable types and a variety of other commercial coaxial cables can be accommodated. See page 398 for coax contact performance data. Matched impedance size 12 coax contacts are also available (see page 402). The use of coax contacts within a connector, compared to the use of individual coaxial/shielded connectors, offers advantages of savings in space and weight and no cross-mating difficulties. Coax and standard contacts may be mixed within the connector to meet special signal needs. The connector itself offers further protection and environmental integrity through the grommets and seals used, and coaxial junction is protected by the connector outer shell. CONCENTRIC TWINAX SHIELDED CONTACTS High performance shielding capabilities are available with Concentric Twinax contacts. Concentric Twinax Contacts Size 8 These are designed for protection from magnetic and electrostatic interference including nuclear electro-magnetic pulse. The contact is crimp terminable to twisted shielded cable and is fully scoop-proof (recessed pins) in MIL-DTL-38999 connectors. The concentric twinax contact is engineered to maintain shield integrity through a multi-pin circular connector and does not require contact polarization within the insert. Size 8 concentric twinax contacts were developed for use in MIL-STD-1553B Airborne multiplex data bus MIL-DTL-38999 Lanyard "Breakaway" applications. Ideal for this Connector with Concentric Twinax application need is the high Contacts, Qualified for MIL-STD-1760 performance Tri-Start connector with its fully scoop-proof feature of recessed pins. The concentric twinax contact is crimp terminable to twisted shielded cable. Size 12 concentric twinax contacts were developed for SAAB. They can be used in any size 12 cavity of D38999 I, II or III or SJT connector. Size 8 & 12 coax, triax or twinax contacts or size 16 coax contacts are available in Ground Plane Connectors (See photo preceding page). These are MIL-DTL-38999 Series III connectors for data bus, LAN and coax/triax/twinax transmission lines with conductive inserts that ground the outer contact 4 conductor to the shell. They are sold "less contacts" 6 MIL-DTL-38999 Connector with High Speed Coax Contacts Size 8 Coax Pin Contact Concentric Twinax Size 12 Contacts MIL-DTL-38999 Connector with Concentric Twinax Contacts Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Coax Contacts with Frequency Range of DC to 40 GHz HIGH FREQUENCY COAX CONTACTS WITH "FLOAT MOUNT" TECHNOLOGY Amphenol Aerospace HF38999 - D38999 Connectors with High Frequency Coax Contacts Amphenol Aerospace now offers DC to 40 GHz size 8 coaxial contacts for High Frequency Size 8 Coax the D38999 housing and standard Contacts with "Float Mount" inserts. These contacts can be Technology terminated to a multiple of cable types depending on the application. By using standard interfaces that are based on MIL-STD-348 and can be installed in any D38999 size 8 insert, Amphenol has transformed the circular connector industry. This technology expands the use of D38999 connectors to include the microwave transmission lines within the multi-port configuration without change to a custom connector. The high frequencies are maintained by Amphenol's unique "Float Mount" technology. This technology allows for consistent microwave performance while maintaining tight mechanical tolerances. This consistency provides superior electrical performance and, unlike other blindmate connectors, will maintain an accurate phase length when mated. See page 404 for specifications, performances and ordering of this contact. Twinax Contacts for Printed Circuit Board Applications PC TAIL TWINAX CONTACTS Amphenol provides Printed Circuit Tail Twinax contacts for MIL-DTL-38999 Series I and III circular connectors and also for ARINC 404 and ARINC 600 rectangular connectors. High reliability is assured with factory pre-assembled contacts and Variety of PC Tail Twinax Contacts standardized termination to the board. See pages 409-411 for performance data and ordering of PC tail twinax contacts, and consult Amphenol Aerospace for further information needed. Also see the Printed Circuit Board, and the Series I, II, III section for MIL-DTL-38999 connectors. D38999 Connectors with PC Tail Twinax Contacts Printed Circuit Twinax Contacts provide a cost effective packaging solution for limited space applications where connectors are attached to printed circuit boards. Shielded Triax Contacts TRIAX CONTACTS WITH THREE CONDUCTORS FOR USE WITH TRIAX CABLE Amphenol supplies sizes 8, 10 and 12 triax contacts for use in MIL-DTL-38999 Triax Contacts Series I, II and III connectors. Triax contacts provide additional shielding when terminated to triax cable having solid or stranded center conductors. See cable compatibility in the Cable Usage Guide and performance data and ordering of triax contacts on pages 408-411. Each of the three conductors of the triax contact is separated by dielectric insulation to isolate ground planes and to improve shielding effectiveness. All conductors are crimp terminated for high reliability and ease of assembly. Triax contacts may be specified for direct connection to printed circuit boards. For maximum system flexibility, triax contacts may be mixed with coax, twinax and power contacts in a single connector. Rail Launch MIL-STD-1760 Connector with Triax Contacts Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 7 Amphenol Aerospace Cable Systems with High Frequency Contacts CABLE ASSEMBLY CAPABILITIES Amphenol provides a large array of cable assemblies with high speed quadrax and differential twinax contacts, as well as coax and concentric twinax contacts. This page shows a few examples. The Cable Usage Guide pages that follow list the design possibilities for these high speed contacts. Amphenol strives to offer customers the widest range of cable assemblies, keeping abreast of the latest cable types in the marketplace. Please consult with the contact product managers at Amphenol Aerospace for assistance in designing the cable assembly that suits your particular needs. From a simple onecable interconnection, to a multiple cable system, Amphenol can design and supply your cable needs for high frequency contacts and connectors. See the High Frequency Contact Designer's Guide at the end of this catalog Eight Wire Gigabit Ethernet Assembly Eight Wire Gigabit Ethernet Assembly Quadrax Contact with 8P8C "RJ45" Jack Ethernet Assembly Quadrax Contact with 8P8C "RJ45" Jack Ethernet Assembly Quadrax Cable Assembly can be attached to any connector application Variety of Quadrax Cable Assemblies TESTING OF CABLES Rigid testing is performed 100% on cable assemblies at Amphenol before they are shipped to make sure they meet customer requirements. These requirements include tests such as DWV, resistance and continuity. Amphenol has the background experience and understanding of harsh environmental testing to assure reliable "end-to-end" interconnect solutions. Quadrax Cable Assembly can be attached to any connector application Quadrax Cable Assembly attached to Board Level Compliant Quadrax Connector Quadrax Cable Assembly attached to Board Level Compliant Quadrax Connector 8 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Cable Usage Guide Use the Cable Usage Guide on pages 373-376 as follows: 1. Locate the cable you are using in Cable Type column. For cables not listed consult Amphenol Aerospace. 2. Refer to the Amphenol Connector section which features contacts/adapters for this cable. Connector size, performance features and insert pattern availability may influence your choice. 3. Order your connector and contacts or transition adapters by following the procedure given in the section for the connector series selected. These instructions are supplemented by the Amphenol Catalog Section covering the basic connector. Quadrax Contacts CABLE USAGE GUIDE D38999 Series III* Connectors Cable Type F-4703-3 F-4703-4 Draka Fileca F-4704-5 F-47-4-6 ET2PC236 Filotex ET2PF870 E50424 PIC Wire E50426 E51424 NF22Q100 NF24Q100 NF24Q100-1 NF24Q100-01-200C NF26Q100 NF26Q100-1 Tensolite NF26-2Q100 24443/03130X-4(LD) Differential Twinax Contacts CABLE USAGE GUIDE D38999 Series III* Connectors Nominal Impedance (ohms) 100 24443/03166X-4(LD) Gore 24443/9P025X-4(LD) 23450/04090X-4 (LD) 24443/C20714X-4(LD) RCN7688 RCN8513 RCN8672 Cable Type Tensolite 26463/70460X-2 ST5M1284-003 Draka Fileca 2709-3 PIC Wire E10224 NF24T100-200C Space 23460/05114X-2(LD) 24463/03220T-2(LD) Tensolite 24463/05099X-8(LD) 26453/03184X-2(LD) 24463/9P025X-2(LD) Raychem 0026A0024, 0024G0024 S280W502-6 JSFY11-24 Gore GSC-05-827300-00 956-6262, 956-1T200 Thermax 12814 MX 100-24 Tensolite 26483/03071X-2(LD) Themax Tensolite Gore JSFY02-1 JSF18 Tensolite Gore Cable Type 26473/02006X-4(LD) RCN8328 * Requires modified connector to accommodate keyed contacts. 98 100 150 Quadrax Transition Adapters CABLE USAGE GUIDE D38999 Series III* Connectors or ARINC 600 Connectors S280W502-4 JSF-18-3 956-4TN 956-5 T956-4T200 MX100Q-24 24450/03089X-4(LD) RCN8487 Nominal Impedance (ohms) Draka Fileca Tensolite 110 150 Thermax Gore Tensolite F-4703-3 F-4704-4 NF22Q100 NF22Q100-01 NF24Q100 NF26Q100 956-5 GSC-10-8273900 26473/02006X-4(LD) Nominal Impedance (ohms) 100 150 Differential Twinax Transition Adapters CABLE USAGE GUIDE D38999 Series III* Connectors or ARINC 600 Connectors Cable Type M17/176-00002 224463/9P025X-2 Tensolite 24463/9P025X-2(LD) Tensolite 26483/03071X-2 Nominal Impedance (ohms) 78 100 150 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 9 Amphenol Aerospace Cable Usage Guide, cont. Quadrax Contacts CABLE USAGE GUIDE ARINC 600 Rack & Panel Connectors Cable Type Draka Fileca Tensolite S280W502-4 JSFY02-1 Gore Tensolite F-4703-3 F-4704-5, F4704-4 NF22Q100 NF24Q100 24443/03130X-4(LD) 24443/9P025X-4(LD) Nominal Impedance (ohms) 100 Differential Twinax Contacts CABLE USAGE GUIDE ARINC 600 Rack & Panel Connectors Cable Type ABS0386WF24 ASNE0272TK22 ASNE0272TK24 Tensolite 24463/9P025X-2(LD) Cable Type EPD32263A EPD22189B M17/176-00002 GSC-12-2548-00 GC875TM24H GSC-12-81095-00 10602 10606 10612 Raychem 10613 10614 23089/RC 05A0771 T10971 7724C8664 7726D0664 782OD0111 (20 AWG) 0024G0024 5M2022-003 HS5930 S280W502-1 CXN2268 150 Nominal Impedance (ohms) 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 78 100 100 100 100 100 Triax Contacts CABLE USAGE GUIDE D38999 Series I, II, III & SJT Connectors Cable Type JN1088WT 5M2397-002 81264-02 JN1088WU Gore GSC-03-81497-00 RG179 (Coax Cable) Tensolite 28988/50823LXX-1 Tensolite 28988/50823LXX-1 Thermatics 12447 10602 (Twinax Cable) 5M2559-001 81264-01 ST5M1323-001 Champlain 81-00700 28598/9C026LT-1 Tensolite 26895/90334X-1 Teledyne 13809 11914/1 Times AA6603 RGX179 Concentric Twinax Contacts CABLE USAGE GUIDE ARINC 600 Rack & Panel Connectors Cable Type 10 100 100 100 100 110 RCN8328 26473/02006X-4(LD) Concentric Twinax Contacts CABLE USAGE GUIDE D38999 Series I, II, III & SJT Connectors S280W502-1 Nominal Impedance (ohms) Nominal Impedance (ohms) 100 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Nominal Impedance (ohms) 50 75 75 75 75 75 75 75 75 77 95 95 95 95 95 95 95 95 95 75 Amphenol Aerospace Cable Usage Guide, cont. Use the Cable Usage Guides on this page for Coax Contacts as follows: 1. Locate the cable you are using in Cable Type column. For cables not listed consult Amphenol Aerospace. 2. Refer to the Amphenol connector section which features contacts for this cable, as indicated by a * in the appropriate column. If more than one connector series utilizes contacts designed for your cable, investigate each of them. Connector size, performance features and insert pattern availability may influence your choice. 3. Order your connector and coax contact by following the procedure given in the section for the connector series selected. These instructions are supplemented by the Amphenol Catalog Section covering the basic connector. 4. The Additional Contacts column of this guide is used to indicate an additional availability of contact designs for older cable types or capability. Consult Amphenol Aerospace for further information. Coax Contacts CABLE USAGE GUIDE Nominal Impedance (ohms) Cable Type RG-5B/U (M17/073-RG212) RG-6A/U (M17/2-RG6) RG-7/U RG-9B/U (M17/075-RG214) RG-11A/U (M17/6-RG11) RG-12A/U (M17/6-RG12) RG-13A/U RG-21A/U RG-55B/U (M17/084-RG223) RG-58C/U (M17/028-RG058) RG-58 (M17/155-00001) RG-59B/U (M17/29-RG59) RG-62A/U (M17/030-RG062) RG-62B/U RG-63B/U (M17/31-RG63) RG-71B/U (M17/90-RG71) RG-87A/U RG-115/U RG-115A/U RG-116/U RG-122/U (M17/054-RG122) RG-133A/U (M17/100-RG133) RG-140/U (M17/110-RG302) RG-141A/U RG-142A/U RG-142B/U (M17/060-RG142) RG-143A/U RG-161/U RG-174A/U (M17/119-RG174) RG-178B/U (M17/093-RG178) RG-179B/U (M17/094-RG179) RG-180B/U (M17/095-RG180) RG-187A/U (M17/094-RG179) RG-188A/U (M17/113-RG316) RG-188 Double Braid RG-195A/U (M17/095-RG180) RG-195 Double Braid RG-196A/U (M17/169-00001) RG-210/U RG-212/U (M17/073-RG212) RG-214/U (M17/075-RG214) RG-216/U (M17/77-RG216) RG-222/U RG-223/U (M17/084-RG223) RG-225/U (M17/86-RG225) RG-227/U RG-302/U (M17/110-RG302) For Circular (MIL-DTL-38999 type) 50 75 97 50 75 75 74 53 53 50 50 75 93 93 125 93 50 50 50 50 50 95 75 50 50 50 50 70 50 50 75 95 75 50 50 95 95 50 93 50 50 75 50 50 50 50 75 CHART CONTINUES ON NEXT PAGE NOTE: For information on coax contacts for Miniature circular connectors, MIL-DTL-26482 Series 1, see catalog 12-070 and consult Amphenol Industrial Operations. For Standard & Heavy Duty Circular (MIL-DTL-5015 type) (MIL-DTL-22992 type) For Rectangular Connectors * * * * Additional Contacts (Consult Amphenol) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * NOTE: MIL-DTL-38999 supersedes MIL-C-38999. MIL-DTL-5015 supersedes MIL-C-38999. MIL-DTL-22992 supersedes MIL-C-22992 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 11 Amphenol Aerospace Cable Usage Guide, cont. Coax Contacts CABLE USAGE GUIDE, cont. Cable Type For Standard & Nominal For Circular Heavy Duty Circular For Rectangular Impedance (MIL-DTL-38999 type) (MIL-DTL-5015 type) Connectors (ohms) (MIL-DTL-22992 type) RG-303/U (M17/111-RG303) RG-304/U (M17/112-RG304) RG-316/U (M17/113-RG316) RD-316 (M17/152-00001) Double Braid RG-400 (M17/128-RG400) M/A-COM 5M2869-001 5022A1311-D Beldon 9307 FA-19X T-Flex-402 T-Flex-405 Filotex ET124962 JN1088WT (Triax) JN1088WU (Triax) PAN6422XQ PAN6422XY PAN6595XM (Triax) 51-04486 Haveg 81-00207 GWN1159A Gore CXN3403 Times AA3248 Teledyne 11299 5021D1331-0 5021D1331-9 5022D1312-9 7527A1318 Raychem 9527A1314 9528A1318 9530A5314 9530D5314 Thermatics 2929-29 Tensolite 30850/87T-1 Thermax 50C-25A-DS-1 ESC352001 ESC432101 50 50 50 * 50 * 50 50 50 50 50 50 50 50 50 75 50 75 75 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 50 50 50 75 95 95 95 95 50 50 * Additional Contacts (Consult Amphenol) * * * * For Cable not found in the Coax Contact Cable Usage Guide, refer to these general dimensional ranges: (In general, for D38999 Connectors, the size 8, 12 and 16 Coax Contacts will terminate cable in the following ranges ) SIZE 16 SIZE 12 .012 / .0215 Center Conductor (Stranded) .012 / .0215 Center Conductor (Stranded) .031 / .066 Dielectric .031 / .105 Dielectric .085 Max Outer braid (must be round for crimp termination) .126 Max Outer braid (must be round for crimp termination) .102 Max. Jacket .145 Max. Jacket SIZE 8 .012 / .0395 Center Conductor (Stranded) .055 / .133 Dielectric .180 Max Outer braid (must be round for crimp termination) .201 Max. Jacket Special coax contacts may be available for cables outside of ranges shown. Consult Amphenol Aerospace for further assistance in selection of coax contact cables. 12 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace MIL-DTL-38999 Circular Connector Overview Amphenol(R) Connectors are ideally suited for the incorporation of shielded contacts for high performance interconnection applications. The circular family is built around MIL-DTL-38999 specifications, with Mil-approved and commercial styles offered. Normal operating voltage for circulars with power contacts only is up to 900 VAC (RMS) at sea level. The MIL-DTL-38999 family offer these features for contact termination flexibility: * Widest selection of insert arrangements that can incorporate: * Size 8 high speed Quadrax and Differential Twinax contacts for MIL-DTL-38999 Series III (specially modified to accommodate keyed contacts) * Transition adapters for use in attaching D38999 Series III connectors with high speed quadrax or differential contacts to PCB boards * Size 8, 12 and 16 Coax contacts * Size 8 and 12 Twinax contacts * Size 8, 10 & 12 Triax contacts * Wide selection of connector shell styles and sizes * Scoop-Proof recessed design in LJT-R, TV-R and SJT-R connectors provide protection for contacts * Standard power contacts are crimp rear release, qualified to SAE AS39029 * Coax, Twinax, and Triax contacts employ the same retention system as power contacts, simplifying user substitution TV-R, Tri-Start, D38999 Series III * High performance capability series for both general duty and severe environment applications * Offers the widest range of Subminiature Family Mil-Spec qualified options in contact and connector styles * Threaded coupling; completely mates in one turn; crimp termination * Superior EMI/EMP shielding effectiveness * Scoop-proof design (recessed pins) * Available in aluminum, stainless steel and firewall, or lightweight composite styles See 38999 section Series III for complete information on this section. GENERAL ORDERING INFORMATION Amphenol MIL-DTL-38999, which feature rear removable contacts, are normally supplied with a full complement of power contacts, separately packaged. Coax, twinax and triax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. If the application is for coax, twinax or triax contacts only, the connector may be ordered less contacts and no power contacts will be supplied. HOW TO ORDER CONNECTORS AND HIGH FREQUENCY CONTACTS JT-R, D38999 Series II See 38999 section Series II, JT for complete information on this series. * Shorter profile connector series for applications requiring maximum space savings * Bayonet coupling, crimp termination * Also available in solder termination types under MIL-DTL-27599 Series II * Select the Circular Series desired. (See features of each series given briefly on this page and in-depth in the other sections of this catalog, which are on-line at www.amphenol-aerospace.com). Series I - LJT-R Connectors Series II - JT-R Connectors Series III - TV-R Connectors SJT* - SJT-R Connectors See Amphe-Lite (Industrial 38999 type) Catalog 12-094 * Select the quadrax, differential twinax, coax, twinax and/or triax contacts or the transition adapters that are needed from the tables on the following pages that correspond to the cable being used. * Select the insert arrangement to accommodate required number of contacts. Insert patterns for quadrax and differential twinax contacts are on pages 395,396. Insert patterns for coax, twinax and triax contacts are on pages 404-406. * Complete the connector part number from the connector series catalog, incorporating the chosen insert pattern number. See detailed how to order page 397 for ordering 38999, Series III with quadrax and differential twinax contacts. Consult Amphenol for assistance in ordering 38999 circulars with coax, twinax and triax contacts. * Consult Amphenol Aerospace for ordering information for connectors with PC tail contacts, and for transition adapters. * If connector is ordered less contacts, power contacts and/or sealing plugs may be ordered separately to fill out the insert arrangement. LJT-R, D38999 Series I See 38999 section Series I, LJT for complete information on this series. * Scoop-proof (recessed pins) * Bayonet coupling, crimp termination * Also available in solder termination types under MIL-DTL-27599 Series II SJT-R, 38999 Type Amphe-Lite, 38999 Type See Catalog 12-094 for complete information on this series. * Commercial/Industrial 38999 Series III type * Cost effective high performance connector for severe environments or general duty industrial applications * Consult Amphenol Industrial Operations for further information 12-094 catalog is on-line at www. amphenol-industrial.com. NOTE: NOTE: See the SJT section of this catalog. * Amphenol proprietary series (non-MS) which is a further expansion of the basic JT family, but incorporates the LJT scoop-proof design * Compliant with several European specifications SAE AS39029 supersedes MIL-C-39029. MIL-DTL-38999 supersedes MIL-C-38999. MIL-DTL-27599 supersedes MIL-C-27599 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 13 Amphenol Aerospace Quadrax Contacts, MIL-DTL-38999, Series III General Description Amphenol(R) Quadrax Contacts -offer several advantages for high data transfer rates, low power consumption and excellent EMI compatibility: * Four strategically spaced inner contacts form two 100 or 150 Ohm matched impedance differential pairs * Outer contact has rugged wall section for durability * Available in size 8 crimp termination style * Also available in size 8 with PC tails (see page 379) * Requires modification of MIL-DTL-38999 connector to accommodate keyed contacts (4) CENTER CONDUCTORS BRAID JACKET TYPICAL QUADRAX SOCKET CONTACT has socket outer contact with a socket inner contact TYPICAL QUADRAX PIN CONTACT has pin outer contact with a pin inner contact INSULATION Cable Illustration - Quadrax Contact Quadrax Contacts are gold plated, crimp termination Quadrax Pin with 8P8C "RJ45" Jack Quadrax Pin Size 8 and MIL-DTL-38999 Series III Connector Finish of mating contacts parts: supplied with 0.000050 min. gold over nickel on mating parts. Consult Amphenol for availability of other finishes. Quadrax Size 8 Contact Performance: * Bandwidth: Up to 3 Gigahertz * Data Rate: Exceeding 3 Gbits/sec. * Voltage Rating: 500 Vrms max. @ sea level * Dielectric Withstanding Voltage: 1000 VAC rms between all inner contacts @ sea level, 500 VAC rms between inner and outer contacts @ sea level Suggested Numbering for Quadrax Contacts ORIENTATION KEY Quadrax in an Eight Wire Gigabit Ethernet Assembly 1 4 Suggested Strain Relief - Insert Arrangements 9-5 or 19-18 with Quadrax Contacts Due to the piggyback grommet interference with normal strain reliefs on the shell size 9 only, the recommended strain relief for the connector is: Amphenol part number TGW-R-5309-10 (OD Cad) or TGFR-5309-10 (Electroless nickel) - shell size 9 only. For 19-18 insert pattern, recommended backshell: Glenair 367-221-NF. This is recommended due to the proximity of the size 8 contacts in relation to the shell. 3 .367 MAX. .525 MAX. PIGGYBACK GROMMET Also see Quadrax contacts for ARINC 600 and R27 Rack and Panel Connectors on page 419 and 420. 14 1 2 2 PIN CONTACT MATING FACE 3 4 SOCKET CONTACT MATING FACE Differential Pairs, contacts 1-3, 2-4. See page 397 for part number ordering of popularly used 38999 Series III connectors with 100 ohm quadrax contacts. Quadrax differential pairs are 1and 3, 2 and 4. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Quadrax Contacts for MIL-DTL-38999 Series III, Application Data TV-R Series, MIL-DTL-38999 Series III* Connectors QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS Contact Part Number (Termination Instruction Sheet)** Cable Inner Impedance Contact Conductor (Ohms) Size (AWG) Electrical Protocol Inner Contact Pin Socket 21-033384-021 (L-2119-A) 21-033385-021 (L-2119-A) 24 Ethernet, 1000 Base-T Gigabit Ethernet Tensolite NF24Q100, NF24Q100-01, 24443/9P025X-4(LD), S280W502-4, 24443/03130X-4(LD), 24443/C20714X-4(LD), 24450/0120X-4(LD), 21-033384-051 NF24-2Q100, TYCO CEC(L-2119-D) RWC-18664, GORE GSC-01-8186901, 24443/03166X-4(LD), Thermax T956-4T200, Pic Wire E51424, Thermax MX100Q-24, NF24Q100-01-200C (Space) 21-033385-051 (L-2119-D) 24 Ethernet, 1000 Base-T Gigabit Ethernet Tensolite NF22Q100, NF22Q100-01, Thermax 956-5, GORE RCN 7688 21-033384-061 (L-2119-H) 21-033385-061 (L-2119-H) 22 Ethernet (100 Mbps), 1000 Base-T Gigabit Ethernet (1 Gbps) Tensolite NF26Q100, NF26Q100-01, 21-033384-071 NF26-2Q100, PIC E51426 (L-2119-AB) 21-033385-071 (L-2119-AB) 26 Ethernet (100 Mbps), 1000 Base-T Gigabit Ethernet (1 Gbps) S280W502-4/BMS1372T03C04G024 21-033384-141 (BACC47GM1) 21-033385-141 (BACC45GN1) 24 Draka Fileca F-4704-6, Gore RCN 8672 21-033384-151 (L-2119-AW) 21-033385-151 (L-2119-AW) 26 Tensolite NF24Q100-01 (same as 21-03338( ) -51, uses EMI Piggyback) 21-033384-161 (L-2119-BE) 21-033385-161 (L-2119-BE) 24 Gore RCN8513, JSFY18-3 21-033384-171 (L-2119-BN) 21-033385-171 (L-2119-BN) 22 Tensolite NF22Q100 Special Box pattern, only mates with 21-0333 ( )-181 21-033384-181 (L-2119-BP) 21-033384-181 (L-2119-BP) 22 Tensolite NF24Q100, NF24Q100-01 for 2.5 Gbps applications 21-033384-191 (L-2119-BS) 21-033385-191 (L-2119-BS) 24 USB2 (28433/02171LX-4) 21-033384-101 21-033385-101 Tensolite 24450/03089X-4(LD) Gore RCN8647 21-033384-211 21-033385-211 JSFY02-1, JSFY18 21-033384-221 21-033385-221 Draka Fileca F-4703-3, F4704-4, Filotex ET 2PC236, Filotex ET2PF870, PIC Wire E50424 ABS0972, Tensolite 23450/04090X-4(LD) Draka Fileca F-4704-5, ABS1503 KD 24 21-033384-231 Gore RCN8487, JSFY18 21-033385-231 100 90 110 Tensolite 24450/03089X-4(LD) Same as 21-03338( )-211 but Box pattern, 21-033384-241 21-033385-241 mates with 21-03338( )-241 only F-4703, ABS1503KD24 21-033384-281 21-033385-281 100 Tensolite 26473/02006X-4(LD)/Gore RCN8328 (not for new designs, use 21-033450/1 series) 21-033384-31 (L-2119-B) 21-033385-031 (L-2119-B) 150 CHART CONTINUES ON NEXT PAGE QUADRAX CONTACT DATA Contacts are inserted by hand. Refer to termination instructions listed. Contacts are removed with a removal tool. Recommended tool is MIL-I-81969/14-06, Daniels DRK-264-8. Refer to termination instructions listed.Finish of mating contact parts: Contact part numbers shown in the chart above are supplied gold plated per ASTM B488 Type II, Code C, .000050 min. thick over nickel plate per AMS-QQ-N-290, Class 2, .000030/.000150 thick. Ethernet (100 Mbps), 1000 Base-T Gigabit Ethernet (1 Gbps) 8 Crimping Tools Ethernet (100 Mbps), 1000 Base-T Gigabit Ethernet (1 Gbps) Ethernet (100 Mbps), 1000 Base-T Gigabit Ethernet (1 Gbps) Outer Contact M22520/2-01 with M22520/5-01 Positioner M22520/2-37 with Die Set M22520/5-45 or with (Location A) Daniels Positioner K709 Ethernet (100 Mbps), 1000 Base-T Gigabit Ethernet (1 Gbps) *Serial FPDP Applications (2.5 Gbps) (Typical app run at 150 Ohms) * HDMI 1.3 USB2.0 (480 Mbps) 24 IEEE 1394B Firewire 24 IEEE 1394B Firewire 24 IEEE 1394B Firewire 24 IEEE 1394B Firewire Meets EN3155-074 26 Daniels crimping tools available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 * Requires modified connector to accommodate keyed contacts. **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Consult Amphenol for current release of this contact or instruction sheet if applicable. Test reports available for indicated protocols. Consult Amphenol Aerospace.Typical applications run at 150 Ohms Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 15 Amphenol Aerospace Quadrax Contacts, MIL-DTL-38999, Series III Application Data TV-R Series, MIL-DTL-38999 Series III* Connectors QUADRAX CONTACTS FOR USE IN TV-R CONNECTORS Contact Part Number Cable Pin Tensolite 26473/02006X-4(LD) Same as 21-033384/5-31 but box pattern (not for new designs, use 21-033450/1 series) Gore RCN8328 Inner Impedance Contact Conductor (Ohms) Size (AWG) (Termination Instruction Sheet)** Socket 21-033384-201 21-033385-201 Gore RCN7625 21-033384-271 21-033385-271 Tensolite 26473/02006X-4(LD), Gore RCN8328 21-033450-001 21-033451-001 (L-2119-BW) (L-2119-BW) Tensolite 26473/02006X-4(LD), Gore RCN8328 21-033450-011 21-033451-011 (same as 21-033450/1-1 except box pattern. Mates with 21-033450/1-11 only. Contact Part Number Impedance L Dim (Ohms) Pin Socket 21-033398-021 21-033397-021 100 Ohm 1.035 21-033398-031 21-033397-031 100 Ohm 0.866 21-033398-061 21-033397-061 150 Ohm 1.035 21-033398-071 21-033397-071 150 Ohm 0.494 21-033398-081 21-033397-081 150 Ohm 0.780 21-033398-091 21-033397-091 100 Ohm 0.840 21-033398-111 21-033397-111 100 Ohm 0.708 21-033398-121 21-033397-121 100 Ohm 0.859 21-033398-131 21-033397-131 150 Ohm 0.780 21-033398-141 21-033397-141 100 Ohm 0.615 21-033398-151 21-033397-151 150 Ohm 0.815 21-033398-191 21-033397-191 100 Ohm 0.605 21-033398-211 21-033397-211 150 Ohm 0.815 21-033398-221 21-033397-221 100 Ohm 0.775 21-033398-231 21-033397-231 100 Ohm 0.494 21-033398-241 21-033397-241 100 Ohm 0.741 21-033398-251 21-033397-251 100 Ohm 0.788 21-033398-271 21-033397-271 100 Ohm 0.741 21-033398-281 21-033397-281 100 Ohm 0.806 21-033398-291 21-033397-291 100 Ohm 1.035 21-033398-301 21-033397-301 100 Ohm 0.836 21-033398-311 21-033397-311 100 Ohm 0.940 21-033398-341 21-033397-341 100 Ohm 0.901 21-033398-351 21-033397-351 100 Ohm 0.871 21-033398-361 21-033397-361 100 Ohm 0.939 21-033398-371 21-033397-371 100 Ohm 0.672 21-033398-381 21-033397-381 100 Ohm 0.914 21-033398-391 21-033397-391 100 Ohm 0.360 21-033398-401 21-033397-401 100 Ohm 1.009 21-033398-411 21-033397-411 150 Ohm 0.866 21-033398-421 21-033397-421 100 Ohm 1.169 21-033398-431 21-033397-431 100 Ohm 0.819 21-033398-451 21-033397-451 150 Ohm 0.494 21-033398-461 21-033397-461 100 Ohm 0.761 21-033398-471 21-033397-471 100 Ohm 0.889 21-033398-481 21-033397-481 100 Ohm 0.971 21-033398-491 21-033397-491 100 Ohm 0.418 21-033398-501 21-033397-501 100 Ohm 0.875 21-033398-511 21-033397-511 100/150 Ohm 0.699 21-033398-521 21-033397-521 100 Ohm 0.582 21-033398-531 21-033397-531 100 Ohm 0.666 21-033398-541 21-033397-541 100 Ohm 0.946 21-033398-551 21-033397-551 100 Ohm 0.788 21-033398-561 21-033397-561 100 Ohm 0.815 16 Crimping Tools Electrical Protocol Pretinned X X X X X X Inner Contact Outer Contact M22520/2-01 with Positioner M22520/2-37 or with Daniels Positioner K709 M22520/5-01 with Die Set M22520/5-45 (Location A) 26 150 8 26 Fibre-Channel (1 GBPS, 2 GBPS, 1G/2G), 1000 Base-CX (1.25 GBPS), SCSI-2 (3.2 GBPS) 26 Fibre-Channel (1 GBPS, 2 GBPS, 1G/2G), 1000 Base-CX (1.25 GBPS), SCSI-2 (3.2 GBPS) Contact Part Number Pin Socket 21-033398-581 21-033397-581 21-033398-591 21-033397-591 21-033398-601 21-033397-601 21-033398-611 21-033397-611 21-033452-011 21-033453-011 21-033452-021 21-033453-021 21-033452-031 21-033453-031 21-033452-041 21-033453-041 21-033452-051 21-033453-051 21-033452-061 21-033453-061 21-033452-071 21-033453-071 Impedance L Dim (Ohms) 100 Ohm 0.721 100/150 Ohm 0.939 100 Ohm 0.939 100 Ohm 1.366 150 Ohm 1.035 (mates to 21-033450/51 series) 150 Ohm 0.815 (mates to 21-033450/51 series) 150 Ohm 0.815 (mates to 21-033450/51 series) 150 Ohm 0.866 (mates to 21-033450/51 series) 150 Ohm 0.494 (mates to 21-033450/51 series) 150 Ohm 0.582 (mates to 21-033450/51 series) 150 Ohm 0.939 (mates to 21-033450/51 series) Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 * Requires modified connector to accommodate keyed contacts. ** Termination instructions are packaged with each contact and can be found on-line at: www. amphenol-aerospace. com/serviceinstructions.asp Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable. Test reports available for indicated protocols. Consult Amphenol Aerospace. *** Must be used with 21-033321-005 piggyback grommet seal. Pretinned X SEALING PLUGS Sealing Plugs for use with D38999 Connectors using Quadrax Contacts Size 8 Cavities Part Number ***Standard Plastic T3-4008-59P Standard Plastic to be used with PCB tails (shorter tail length) T3-4008-59P1 ***Metal sealing plug - can be used when mating with contacts on mating half 21-033899-8Q1 Metal sealing plug used with PCB's and mating contact on mating half 21-033899-8Q2 PIGGYBACK GROMMET Grommet for use with D38999 Connectors using Quadrax Contacts Part Number Metallized piggyback grommet 21-033321-023 Indicated length given in chart at left is the distance from the rear of the contact retention shoulder to the tip of the PCB tails. L DIM. LENGTH INDICATED IN TABLE COLUMN X Note: it does not indicate stickout length when installed in D38999 connector. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com New "Split-Pair" Quadrax Contacts & Cables Assemblies for MIL-DTL-38999, Series III Amphenol Aerospace for use with CAT6A Type Cable Amphenol Aerospace offers the high performance interconnect solution for CAT6A type cable. FEATURES & BENEFITS: * Overall higher bandwidth than standard CAT5E quadrax * Enhanced crosstalk performance (compared to standard quadrax) due to compatibility with shielded twisted pair of cables * Can be used for a variety of high speed applications beyond current quadrax design** * Four strategically spaced inner contacts form two 100 Ohm matched impedance differential pairs * Outer contact has rugged wall section for durability * Available in size 8 crimp termination style * Also available in size 8 PC tails * Can be installed into existing quadrax contact connector cavities * Requires modification of MIL-DTL-38999 connector to accommodate keyed contacts MIL-DTL-38999 Series III Connectors with "Split-Pair" Quadrax Contacts for use with CAT6A Type Cable "Split-Pair" Quadrax Contacts for use with CAT6A Type Cable APPLICATIONS: For use with, but not limited to, the following electrical protocols : * * * * * * * Suggested Numbering for Quadrax Contacts 10/100/1000/10GBASE-T Ethernet DVI USB 2.0 Serial RapidIO (up to 3.125 Gbps) PCI-Express 2.0 HDMI 1.3a SATA 2.0 (up to 3 GHz) 1 1 2 4 2 3 3 PIN CONTACT MATING FACE 4 SOCKET CONTACT MATING FACE Differential Pairs: 1 & 4, 2 & 3 SPLIT-PAIR QUADRAX CONTACT* PART NUMBERS: Crimp Style Part Number PIN 21-033470-001 SOCKET 21-033471-001 PIN 21-033470-021 SOCKET 21-033471-021 Cable AWG Thermax 1536-224 24 Thermax 1536-195 26 SPLIT-PAIR QUADRAX SOCKET CONTACT CRIMP TOOLS: Outer Contact DANIELS M22520/5-01 with die set Y1999 or M22520/5-45 Inner Contact DANIELS M22520/2-01 with positioner K1777 SPLIT-PAIR QUADRAX PIN CONTACT Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 REMOVAL TOOL: M81969/14-12 * Patent pending. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 17 Amphenol Aerospace New "Split-Pair" Quadrax Contacts Frequencies & Performance Data PCB QUADRAX PIN PCB QUADRAX SOCKET PCB Pin Part Numbers Impedance Length .015 PCB Socket Part Numbers Impedance Length .015 21-033466-011 1.035 21-033467-011 1.035 21-033466-021 .815 21-033467-021 .815 21-033466-031* .815 21-033467-031* .866 21-033467-041 21-033466-051 .494 21-033467-051 .494 21-033466-061 .582 21-033467-061 .582 21-033466-071 .815 21-033467-071 .815 21-033466-081 .840 21-033467-081 .840 100 Ohm 21-033466-041 .815 100 Ohm .866 *Pretinned Indicated length given in charts above is the distance from the rear of the contact retention shoulder to the tip of the PCB tails. LENGTH INDICATED IN TABLE COLUMN Note: it does not indicate stickout length when installed in D38999 connector. TRANSITION ADAPTERS FOR LAUNCHING SIGNALS TO PC BOARDS 100 OHM QUADRAX TRANSITION ADAPTERS FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS Quadrax Type Adapter/ Cable or PCB Tail Length PCB Quadrax Receptacle Straight Adapter/ Tail Length .110 Quadrax Receptacle 90 degree Adapter with cable to board/ Thermax 1536-224 Quadrax Receptacle Straight Adapter with cable to board/ .195 tail length Thermax 1536-224 18 Mating plugs and receptacles PCB Quadrax Receptacle 90 Degree Adapter/ Tail Length .110 Plug Wired to board Quadrax Plug Adapter/ Thermax 1536-224 Part Number Illustration of Adapter Receptacle Impedance (Ohms) Mating Thread Size 100 .375 21-033468-011 21-033469-001 21-033469-011 21-033469-021 21-033469-031 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace New "Split-Pair" Quadrax Contacts Frequencies & Performance Data FREQUENCIES OF INTEREST For use with the following, but not limited to, electrical protocols: Frequency (GHz) Insertion Loss (dB) Return Loss (dB) 10/100/1000/10GBASE-T Ethernet * DVI * USB 2.0 * Serial RapidIO (up to 3.125 Gbps) * PCI-Express 2.0 * HDMI 1.3a * SATA 2.0 (up to 3 GHz) NEXT (dB) FEXT (dB) 0.1 0.09 35.68 62.36 59.29 0.24 0.22 36.44 42.87 62.25 0.5 0.45 43.66 43.63 55.22 0.625 0.57 43.49 53.68 43.53 1 0.98 17.82 49.26 48.33 1.25 1.29 15.1 43.57 44.12 1.5 1.47 17.94 46.02 40.78 1.7 1.86 12.23 48.01 47.23 2 2.11 12.9 37.45 38.12 2.5 2.42 15.97 29.9 31.52 3 2.86 16.52 35.94 29.36 Insertion Loss PERFORMANCE DATA The following graphs on this page and the next page provide performance data on Amphenol(R) 10GBASE signal integrity (SI) quadrax contacts. Testing was done with 2 mated contacts terminated on both ends of 1 meter Thermax cable. S-Parameters Magnitude 0 S1, 2 -0.5 -1.0 -1.5 -2.0 dB -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 -6.5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1 Frequency / GHz 2 3 4 5 Return Loss S-Parameters Magnitude 0 S1, 1 -5 -10 -15 dB -20 -25 -30 -35 -40 -45 -50 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1 Frequency / GHz 2 3 4 5 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 19 Amphenol Aerospace New "Split-Pair" Quadrax Contacts Frequencies & Performance Data Near-end Crosstalk S-Parameters Magnitude -20 S1, 3 -25 -30 -35 -40 dB -45 -50 -55 -60 -65 -70 -75 -80 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1 Frequency / GHz 2 3 4 5 Far-end Crosstalk S-Parameters Magnitude -20 S1, 4 -25 -30 -35 -40 dB -45 -50 -55 -60 -65 -70 -75 -80 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1 Frequency / GHz 2 3 4 5 Voltage / V 2.5 Gps Eye Pattern (PRBS n=15) 20 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 P1 Real Part 0 200 400 600 Time / ps TD Voltage 800 1000 1200 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Differential Twinax Contacts, MIL-DTL-38999 Series III, General Description Amphenol Aerospace Amphenol(R) Differential Twinax Contacts - Offer several advantages for high data transfer rates, low power consumption and excellent EMI compatibility: * Two strategically spaced inner contacts form two 100 or 150 Ohm matched impedance differential pairs * Outer contact has rugged wall section for durability * Available in size 8 crimp termination style * Also available in size 8 with PC tails (see page 386) * Requires modification of MIL-DTL-38999 connector to accommodate keyed contacts (2) CENTER CONDUCTORS BRAID JACKET TYPICAL DIFFERENTIAL TWINAX SOCKET CONTACT has socket outer contact with a socket inner contact INSULATION Cable Illustration - Differential Twinax Contact TYPICAL DIFFERENTIAL TWINAX PIN CONTACT has pin outer contact with a pin inner contact Differential Twinax Contacts are Gold plated, Crimp Termination Finish of mating contacts parts: supplied with 0.000050 min. gold over nickel on mating parts. Consult Amphenol for availability of other finishes. Differential Twinax Socket Contact Differential Twinax Size 8 Contact Performance: * * * * Bandwidth: Up to 3 Gigahertz Data Rate: Exceeding 3 Gbits/sec. Voltage Rating: 500 Vrms max. @ sea level Dielectric Withstanding Voltage: 1000 VAC rms between all inner contacts @ sea level 500 VAC rms between inner and outer contacts @ sea level Differential Twinax Pin Contact Suggested Numbering for Differential Twinax Contacts ORIENTATION KEY 2 1 PIN CONTACT MATING FACE 1 2 SOCKET CONTACT MATING FACE Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 21 Amphenol Aerospace Differential Twinax Contacts, MIL-DTL-38999 Series III, Application Data TV-R Series, MIL-DTL-38999 Series III* Connectors DIFFERENTIAL TWINAX CONTACTS FOR USE IN TV-R CONNECTORS Contact Part Number Impedance Contact (Ohms) Size (Termination Instruction Sheet)** Cable Tensolite 24463/05099X-8(LD), Thermax MX 100-24, Tensolite 24463/9P025X-2(LD), Thermax 12814, ST5M1284-003 (98 Ohm), 26463/70460X2 (98 Ohm), PIC E10224, Fileca 2709-3, NF24T100-200C (Space), S280W502-1 GORE GSC-05-827300-00 Tensolite 26453/03184X-2(LD) Thermax 956-626Z Tensolite 26453/03184X-2(LD), Thermax 956-626Z, GORE GSC-05-827300-00 ASNE08072003-09 Inner Contact Pin Socket 21-033387-021 (L-2119-E) 21-033388-021 (L-2119-E) Outer Contact 21-033387-051*** 21-033388-051*** (L-2119-AY) (L-2119-AY) 21-033387-041 (L-2119-T) 21-033388-041 (L-2119-T) 23460/05114X-2(LD), PIC E1024 21-033387-061 (L-2119-BH) 21-033388-061 (L-2119-BH) Raychem 0026A0024, M17/176-00002 (77 Ohm) 21-033387-071 (L-2119-BJ) 21-033388-071 (L-2119-BJ) JSFY11-24, Tensolite 24463/03220T-2(LD), Thermax 956-1T200 21-033387-091 (L-2119-BT) 21-033388-091 (L-2119-BT) S280W502-6, Tensolite 24463/9P026X-2(LD) 21-033387-101 (L-2119-AK) 21-033388-101 (L-2119-AK) AXON P509782 21-033387-131 21-033388-131 100 Tensolite 26453/03184X-2(LD) 21-033387-151 21-033388-151 100 Tensolite 26483/03071X-2(LD) 21-033387-031 (L-2119-AC) 21-033388-031 (L-2119-AC) Tensolite 26483/03071X-2(LD) 21-033456-001 (L-2119-BX) 21-033457-001 (L-2119-BX) 100 Ethernet, USB PCB (1.035 Length) Contact Part Number Pin Socket 21-033834-001 21-033835-001 PCB (.788 Length) 21-033834-031 21-033835-031 PCB (.494 Length) 21-033834-041 21-033835-041 PCB (.939 Length) 21-033834-051 21-033835-051 PCB (.780 Length) 21-033834-061 21-033835-061 PCB (.871 Length) 21-033834-071 21-033835-071 PCB (.937 Length) 21-033834-081 21-033835-081 PCB (1.035 Length) 21-033834-091 21-033835-091 PCB (.843 Length) 21-033834-101 21-033835-101 PCB (.806 Length) 21-033834-111 21-033835-111 PCB (.908 Length) 21-033834-121 21-033835-121 PCB (.530 Length) 21-033834-131 21-033835-131 PCB (.819 Length) 21-033834-141 21-033835-141 PCB (1.035 Length) 21-033834-021 21-033835-021 PCB (1.035 Length) mates to 210-33456/57 series 21-033458-001 21-033457-001 Impedance (Ohms) M22520/2-01 with Positioner M22520/2-37 or with Daniels Positioner K709 8 150 M22520/5-01 with Die Set M22520/5-45 (Location A) Fibre Channel, 1000 Base-CX Ethernet PCB DIFFERENTIAL TWINAX CONTACTS FOR USE IN TV-R CONNECTORS PCB Quadrax Contacts Crimping Tools Electrical Protocol Contact Size Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 * Requires modified connector to accommodate keyed contacts. *** Indicated contact is vacuum degassed Test reports available for indicated protocols. Consult Amphenol Aerospace. **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Consult Amphenol Aerospace for current release of this instruction sheet. 100 8 150 Indicated length given in chart at left is the distance from the rear of the contact retention shoulder to the tip of the PCB tails. L DIM. LENGTH INDICATED IN TABLE COLUMN DIFFERENTIAL TWINAX CONTACT DATA Contacts are inserted by hand. Refer to termination instructions listed. Contacts are removed with a removal tool. Recommended tool is MIL-I-81969/14-06, Daniels DRK-264-8. Refer to termination instructions listed. Note: it does not indicate stickout length when installed in D38999 connector. Finish of mating contact parts: Contact part numbers shown in the chart above are supplied gold plated per ASTM B488 Type II, Code C, .000050 min. thick over nickel plate per AMS-QQ-N-290, Class 2, .000030/.000150 thick. 22 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Compliant Quadrax Contacts and PC Tail Quadrax Contacts for Attachment to PC Boards General Description Amphenol(R) Quadrax Contacts for Printed Circuit Board Attachment- Available for MIL-DTL-38999 MIL-DTL-38999, SERIES III CONNECTOR WITH PC TAIL CONTACTS. This arrangement has 33 size 22D and 2 Quadrax PC tail contacts. Series III Circular connectors with straight PC tail termination and with compliant pin termination. These provide the ideal solution for bringing high speed data transmission to the board. MIL-DTL-38999, SERIES III CONNECTOR WITH PC TAIL CONTACTS. This arrangement has 8 Quadrax PC tail contacts. Compliant Pin Quadrax and PC Tail Quadrax Contacts Amphenol(R) Quadrax Contacts for Rectangular Board Level Connectors - Incorporate the same size 8 Quadrax PCB contacts as used in circular 38999 connectors. * Size 8 Quadrax Compliant contacts with hole diameters: .025 .002 PTH Quadrax contact .040 .003 PTH shell grounding Accommodates backplane .125 inch min. thickness * Consult Amphenol Aerospace for availability of additional connector configurations 4 POSITION BOARD LEVEL CONNECTOR WITH QUADRAX 2.200 2.000 .475 .500 .720 .376 Compliant Pin Quadrax Board Level Connector 8 POSITION BOARD LEVEL CONNECTOR WITH QUADRAX 3.440 3.640 .475 .381 H G F E D C B A .500 A B C D E F G H .720 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 23 Amphenol Aerospace Quadrax Transition Adapters and Differential Twinax Transition Adapters General Description Amphenol(R) Transition Adapters - Are used to facilitate launching of controlled impedance signals to printed circuit boards. Amphenol provides transition adapters in both contact types: * Quadrax transition adapters, 90 or straight receptacles threaded or cable to board style * QUADRAX TRANSITION ADAPTER PLUG Differential twinax transition adapters, 90 or straight receptacles, threaded or cable to board style QUADRAX TRANSITION ADAPTER 90 DEGREE RECEPTACLE ELECTRICAL PROTOCOLS FOR QUADRAX TRANSITION ADAPTERS Part Number Plug 90 Quadrax Receptacle and Plug Transition Adapter Receptacle Impedance (Ohms) Electrical Protocol 21-033836-031 Ethernet, gigabit Ether 21-033836-041 Ethernet, gigabit Ether 21-033836-051 Ethernet, gigabit Ether 21-033836-061 Ethernet, gigabit Ether 21-033837-081 (90 degree) Suggested Numbering for Transition Adapters with Quadrax Contacts 21-033837-091 (90 degree) 100 21-033837-041 (90 degree) ORIENTATION KEY 21-033837-051 (straight) Ethernet, gigabit Ether 21-033837-061 (90 degree) 21-033837-141 (90 degree) 1 4 4 1 2 3 3 2 21-033837-101 1000 Base CX, Fibre channel 21-033836-021 21-033837-021 (90 degree) 21-033837-211 (jam nut) 21-033837-031 (straight) 1000 Base CX, Fibre channel 150 21-033837-071 (90 degree) TRANSITION ADAPTER PLUG MATING FACE 21-033837-111 90 RECEPTACLE TRANSITION ADAPTER MATING FACE ELECTRICAL PROTOCOLS FOR DIFFERENTIAL TWINAX TRANSITION ADAPTERS Part Number Plug Receptacle Impedance (Ohms) Electrical Protocol 21-033832-81 21-033832-21 Ethernet 21-033833-021 (90 degree) 21-033833-031 (90 degree) Ethernet 21-033833-151 (90 degree) 21-033832-111 100 21-033833-161 (90 degree) 21-033833-171 (90 degree) 21-033833-091 (90 degree) 21-033833-051 (90 degree) 21-033833-141 (90 degree) 90 Differential Twinax Receptacle and Plug Transition Adapter TRANSITION ADAPTER DATA Finish of mating contact parts: Contacts are supplied gold plated per ASTM B488 Type II, Code C, .000050 min. thick over nickel plate per AMS-QQ-N-290, Class 2, .000030/.000150 thick. 24 21-033832-91 21-033833-111 (90 degree) 21-033833-181 (90 degree) 150 21-033833-101 (90 degree) Consult Amphenol Aerospace for current release of this adapter. Test reports available for indicated protocols; consult Amphenol Aerospace. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Quadrax Transition Adapters for Attachment to PC Boards Application Data 100 OHM QUADRAX TRANSITION ADAPTERS FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS Part Number Quadrax Type Adapter/ Cable or PCB Tail Length Illustration of Adapter Plug Quadrax Plug Adapter/ Tensolite NF24Q100, NF24Q100-01 24443/9P025X-4(LD) S280W502-4 24443/03130X-4(LD) Thermax 956-4TN Quadrax Plug Adapter/ Tensolite NF22Q100, NF22Q100-01, Thermax 956-5, Tensolite 24450/030894-4(LD) Draka Fileca F-4704-5 Quadrax Plug Adapter/ Draka Fileca F-4703-3, F-4704-4 Quadrax Plug Adapter/ NF26Q100 Receptacle (L-2119-U) 21-033836-041 (L-2119-W) 21-033836-051 (L-2119-Y) 21-033836-061 (L-2119-AM) Mating plugs and receptacles 21-033836-071 21-033836-101 21-033836-081 21-033837-081 100 M22520/2-01 with Positioner M22520/2-37 or with Daniels Positioner K709 M22520/5-01 with Die Set M22520/5-45 (Location A) NA NA M22520/2-01 with Positioner M22520/2-37 or with Daniels Positioner K709 M22520/5-01 with Die Set M22520/5-45 (Location A) .375 (L-2119-AR) 21-033837-261 21-033837-091 (L-2119-BL) PCB Quadrax Receptacle 90 Degree Adapter/Tail Length .110 21-033837-041 PCB Quadrax Receptacle 90 Degree Adapter/Tail Length .200 21-033837-201 PCB Quadrax Receptacle Straight Adapter/Tail Length .110 21-033837-051 PCB Quadrax Receptacle Straight Adapter/Special Tail Length (.200) 21-033837-061 21-033837-131 21-033837-141 (L-2119-BB) Wired to board Straight adapter Tail Length .175 Quadrax Receptacle 90 degree Adapter with cable to board/ NF24Q100 Tail Length .110 Quadrax Receptacle 90 degree Adapter with cable to board/ ABS1503KD24 Tail Length .110 Tensolite NF22Q100-01 Thermax 956-5 Draka Fileca F4704-5 Quadrax Receptacle Straight Adapter with cable to board/ NF24Q100, NF24Q100-01 Tail Length .195 Mating Crimping Tools Impedance Thread (Ohms) Size Inner Contact Outer Contact 21-033836-031 Gore RCN8724 (30 awg) Gore ACN1042 (28 awg) Gore RCN8973 Quadrax Plug Adapter/ Hexnut with Lock Wire Holes Tensolite NF24Q100-01 Quadrax Receptacle Straight Adapter in-line jam nut (threaded)/ GSC-10-8273900 Quadrax Receptacle Straight Adapter in-line jam nut (threaded) Tensolite NF24Q100-01 Quadrax Receptacle Straight Adapter in-line (threaded)/NF24Q100 Tensolite NF24Q100-01, Tensolite 24443/9P025X -4 (LD), S280W502-4, Tensolite 24443/03130X-4 (LD), Thermax 956-4TN (Termination Instruction Sheet)** Quadrax receptacle straight adapter w/ cable to board, Tail length .195 Draka Fileca F-4703-3, F-4703-4 21-033837-231 100 21-033837-101 (L-2119-AN) 21-033837-241 Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 ** Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Consult Amphenol Aerospace for current release of this adapter and instruction sheet if applicable. See electrical protocols for transition adapters on page 388. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 25 Amphenol Aerospace Quadrax Transition Adapters For Attachment to PC Boards Application Data 150 OHM QUADRAX TRANSITION ADAPTERS FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS Part Number Quadrax Type Adapter/ Cable or PCB Tail Length PCB Quadrax Receptacle 90 Degree Adapter/Tail Length .110 PCB Receptacle 90 Degree Adapter/ Tail Length .200 PCB Quadrax Receptacle Straight Adapter/Tail Length .110 Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 26 (L-2119-S) 21-033837-021 150 NA .375 21-033837-251 NA 21-033837-031 21-033837-211 (L-2119-BY) Wired to board Quadrax Receptacle Straight Adapter with cable to board/ Tensolite 26473/02006X-4 (LD) M22520/2-01 with Positioner M22520/2-34 21-033836-021 Quadrax Receptacle Straight Adapter in-line Jam Nut (threaded) Tensolite 26473/02006X-4 (LD), Gore RCN8328 Quadrax Receptacle 90 degree Adapter with cable to board/ Tensolite 26473/02006X-4 Mating Crimping Tools Impedance Thread (Ohms) Size Receptacle Inner Contact Outer Contact (Termination Instruction Sheet)** Plug Mating plugs and receptacles Quadrax Plug Adapter/ Tensolite 26473/02006X-4(LD), Gore RCN8328 Illustration of Adapter 21-033837-071 (L-2119-AI) 150 21-033837-111 (L-2119-AP) M22520/2-01 with Positioner M22520/2-34 M22520/5-01 with Die Set M22520/5-45 (Location A) ** Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Consult Amphenol Aerospace for current release of this adapter and instruction sheet if applicable. See electrical protocols for transition adapters on page 388. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Differential Twinax Transition Adapters for Attachment to PC Boards - Application Data 100 OHM DIFFERENTIAL TWINAX TRANSITION ADAPTERS FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS Differential Twinax Type Adapter/ Cable or PCB Tail Length Differential Twinax Plug Adapter/ Tensolite CAN22TDT120 (120 Ohm) PCB Differential Twinax Receptacle 90 degree Adapter/Tail Length .283 PCB Differential Twinax Receptacle Straight Adapter/Tail Length .283 Differential Twinax Receptacle 90 degree Adapter (low profile) with cable to board/ Tensolite 24463/9P026X-2 Differential Twinax Receptacle 90 degree Adapter with cable to board/ Tensolite 24463/9P025X-2 Differential Twinax Receptacle 90 degree Adapter with cable to board/ Tensolite 24463/9P025X-2 Receptacle Mating Crimping Tools Impedance Thread (Ohms) Size Inner Contact Outer Contact 21-033832-081 (L-2119-AJ) Mating plugs and receptacles PCB Differential Twinax Receptacle Straight Adapter/ Tail Length .110 PCB Differential Twinax Receptacle Straight Adapter/ Tail Length .165 Plug 21-033832-021 (L-2119-P) 21-033833-021 100 M22520/2-01 with Positioner M22520/2-34 M22520/5-01 with Die Set M22520/5-05 (Location B) N/A N/A M22520/2-01 with Positioner M22520/2-34 M22520/5-01 with Die Set M22520/5-45 (Location A) N/A N/A M22520/2-01 with Positioner M22520/2-34 M22520/5-01 with Die Set M22520/5-45 (Location A) .3125 21-033833-031 21-033833-151 21-033832-111 Mating plugs and receptacles PCB Differential Twinax Receptacle 90 Degree Adapter/ Tail Length .110 (Termination Instruction Sheet)** 21-033833-161 100 .375 21-033833-171 21-033833-091 (L-2119-AF) Wired to board Differential Twinax Plug Adapter/ M17/176-00002 (77 ohms) 24463/9P026X-2 Differential Twinax Plug Adapter/ Tensolite 24463/9P025X-2(LD) 10-646060 Part Number Illustration of Adapter 21-033833-051 (L-2119-V) 100 N/A 21-033833-141 (L-2119-BU) 150 OHM DIFFERENTIAL TWINAX TRANSITION ADAPTERS FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALS TO PC BOARDS PCB Differential Twinax Receptacle 90 Degree Adapter/ Tail Length .110 PCB Differential Twinax Receptacle Straight Adapter/ Tail Length .110 Differential Twinax Receptacle 90 degree Adapter with cable to board/ Tensolite 26483/03071X-2 Wired to board Differential Twinax Plug Adapter/ Tensolite 26483/03071X-2 Mating plugs and receptacles Differential Twinax Type Adapter/ Cable or PCB Tail Length Part Number Illustration of Adapter (Termination Instruction Sheet)** Plug Receptacle Mating Crimping Tools Impedance Thread (Ohms) Size Inner Contact Outer Contact 21-033832-091 (L-2119-BR) 21-033833-111 150 .375 21-033833-181 21-033833-101 (L-2119-BM) 150 N/A M22520/2-01 with Positioner M22520/2-34 M22520/5-01 with Die Set M22520/5-45 (Location A) N/A N/A N/A N/A M22520/2-01 with Positioner M22520/2-34 M22520/5-01 with Die Set M22520/5-45 (Location A) ** Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Consult Amphenol Aerospace for current release of this adapter and instruction sheet if applicable. See electrical protocols for transition adapters on page 388. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 27 Amphenol Aerospace Micro D-Twinax Transition Adapters Push-Pull Quick disconnect Interconnects Amphenol now offers differential twinax transition adapters in smaller sizes that provide matched impedance interconnection to PCB boards. Our unique push-pull quick disconnect adapter design offers: * Advantages over traditional threaded type adapters * Launching of controlled impedance (100 ohm) signals for high speed twinax contacts with push-pull quick disconnect coupling * Rugged construction, 100+ mating cycles for reliable and secure data transmission * Miniature size for tighter spacing on boards * Intermountability with existing threaded solutions having the same PCB tail footprint Styles include: * Plug - standard length and extended length options * Straight PCB receptacle, 90 PCB receptacle * Two jam nut receptacle styles - both with standard length and extended length options * Bushing assembly 90 adapter (used with plug or jam nut receptacle) Micro D-Twinax Transition Adapters Shown right: Straight receptacle mated to plug Shown left: Jam nut and 90 receptacles Micro D-Twinax Transition Adapter Plug .719 REF. .245 DIA. REF. Part Number 21-033832-151 21-033832-161 Cable Type* Impedance (Ohms) Calmont 3007-1923-12-7 Tensolite 26453/03184X-2LD Thermax 956-626Z 100 21-033832-121** Calmont 3007-1923-12-7 * See page 3 for information on other cable terminations. ** Same as -151 with extended ferrule for added cable support Micro D-Twinax Transition Adapter Straight PCB Receptacle .020 .001 DIA. PCB TAILS 2 PLACES .433 REF. .050 .110 REF. Straight receptacle mated to plug .100 Part Number .290 DIA. REF. 28 .0223 .0010 SQUARE OR .0290 .0010 DIA. ROUND PCB TAILS, 4 PLACES 21-033833-191 Impedance (Ohms) 100 .100 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Micro D-Twinax Transition Adapters Push-Pull Quick disconnect Interconnects Micro D-Twinax Transition Adapter 90 PCB Receptacle .244 REF. .484 REF. 90 Degree receptacle mated to plug .305 REF. Part Number Impedance (Ohms) 21-033833-201 .020 .001 DIA. PCB TAILS 2 PLACES .110 REF. 100 21-033833-281 .140 PCB tail length .100 .0223 .0010 SQUARE OR .0290 .0010 DIA. ROUND PCB TAILS, 4 PLACES .050 .100 All dimensions for reference only. Micro D-Twinax Transition Adapter Jam Nut Receptacles Jam Nut Receptacle, Style 1 Smaller diameter front shell requires a smaller mounting D-hole dimension in panel. .559 REF. .250-36 UNS-24 THREAD Jam nut receptacle, Style 1, mated to plug .405 REF. .200 PANEL MAX. Part Number 21-033833-241 .235 FLAT MAX. 21-033833-261 Cable Type* Impedance (Ohms) Calmont 3007-1923-12-7 Tensolite 26453/03184X-2LD Thermax 956-626Z 100 21-033833-211** Calmont 3007-1923-12-7 .3125 HEX .3125 HEX NUT LOCK WASHER * See page 3 for information on other cable terminations. ** Same as -241 with extended ferrule for added cable support Jam Nut Receptacle, Style 2 Has a larger diameter front shell than Style 1. Requires a larger mounting D-hole in panel. .545 REF. .405 REF. .375-24 UNS-2A THREAD .150 PANEL MAX. Jam nut receptacle, Style 2, mated to plug Part Number .339 FLAT MAX. 21-033833-251 21-033833-271 .450 DIA. REF. 2 PLACES .425 HEX NUT .425 HEX LOCK WASHER Cable Type* Impedance (Ohms) Calmont 3007-1923-12-7 Tensolite 26453/03184X-2LD Thermax 956-626Z 100 21-033833-231** Calmont 3007-1923-12-7 * See page 3 for information on other cable terminations. ** Same as -251 with extended ferrule for added cable support Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 29 Amphenol Aerospace Micro D-Twinax Transition Adapters Push-Pull Quick disconnect Interconnects 90 Bushing Assemblies for use with Wired Micro D Transition Adapters To facilitate tight cable bend requirements, Amphenol provides 90 bushing assemblies which convert straight plug and receptacle wired adapters into 90 wired adapters. 90 Bushing Assembly Part Number 21-033425-201 90 bushing assembly is ordered separately. Adapters are not included with bushing assembly. .531 REF. .210 REF. .210 REF. .435 REF. 90 Bushing Assembly with Jam Nut Micro D Transition Adapter Illustrations below show how the 90 bushing assembly attaches to either a plug or a jam nut receptacle adapter. JAM NUT RECEPTACLE TRANSITION ADAPTER PLUG TRANSITION ADAPTER 1.264 REF. 1.019 REF 90 BUSHING ASSEMBLY 90 BUSHING ASSEMBLY .563 REF. .563 REF. .668 REF. .668 REF. 90 Bushing Assembly with Wired Micro D Plug Transition Adapter 90 Bushing Assembly with Wired Micro D Jam Nut Receptacle Transition Adapter All dimensions for reference only. Amphenol transition adapters are capable of terminating to additional 100 Ohm cables beyond what are listed in the charts on pages 1 and 2. Cables need to have the following dimensions: * .0210/.011 Dia. stranded center conductor (26/30 AWG) * .045 Dia. max. inner wire insulation * .115 Dia. max. outer braid (round type preferred) * .150 Dia. max. jacket Consult Amphenol Aerospace for other cable termination possibilities. 30 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Insert Arrangements - MIL-DTL-38999, Series III Incorporating Quadrax & Differential Twinax Contacts This illustrated listing represents the most readily available patterns incorporating quadrax and differential twinax contacts within D38999, Series III connectors. If you require other arrangements than what are shown here, consult Amphenol for further availability. In most cases, unless otherwise stated, size 8 cavities can be filled with quadrax or differential twinax contacts. Arrangements can be mixed with any size 8 coax, and/or concentric twinax or triax contacts. Front face of pin inserts illustrated 1 A 1 A B D 17 8 2 7 9 11 17-2 17-22 4 6 B C 30 5 Insert Arrangement 9-5 Number of Contacts 1 38 1 2 2 2 8 2 Contact Size 8 22D 8 Twinax 12 8 8 22D 8 17-52 Grounded R N L K Number of Contacts Contact Size C 16 14 15 B P B S G N K R M 2 3 4 12 E F 1 A 13 g 19-18 Insert Arrangement A h D H J f W U C T U M V B S 17-60 Meets Boeing Specification A P 3 10 6 11 K E F 8 10 19-31 19-AB 4 12 1 2 22D 8 22D 12 8 A C B 7 9 14 D 5 8 19-AD 21-75 4 16 1 4 8 20 8 8 Note: 19-AB same as 19-18 but no 22D contacts. Ground plane only. 29 22 16 S T A B R 18 B E C P F M J L Number of Contacts K H G C D E F 32 41 59 42 60 67 94 81 75 33 26 6 53 68 82 76 99 93 15 21 21-79 Insert Arrangement Contact Size V 85 25 19 U 79 74 D N 72 24 1 A 64 46 7 28 23-6 78 84 25-7 17 2 6 97 2 22D 8 8 22D 8 CONTACT LEGEND 8 10 Quadrax or Differential Twinax 12 16 20 22D Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 31 Amphenol Aerospace Insert Arrangements - for MIL-DTL-38999 Incorporating Quadrax & Differential Twinax Contacts Front face of pin inserts illustrated U A B T A b S G C Z P F k m N D f u v n g M F 1 L V G H K H J Insert Arrangement 25-8 25-17 Number of Contacts 8 36 6 10 13 3 4 Contact Size 8 22D 8 20 16 8 12 1 12 V 3 13 11 19 18 10 24 17 20 14 21 25 23 22 15 16 9 4 5 C Z a R n P D D A 7 2 b E S p z m N M 25-26 w y k 7 Insert Arrangement Y v q 6 8 u 1 B X AA r T 8 t s U 25-20 A W 2 E F 2 W J K D U 6 7 3 X G X L 4 Y N T 5 W h Y M E E t w p e C Z P D s r q R H B R V d c A S C a B g h f K L e F c d x 6 3 C G B H J 5 25-46 4 25-62 Number of Contacts 16 5 41 40 4 2 Contact Size 20 12 8 20 16 8 8 4 16 8 Ground plane only CONTACT LEGEND 8 10 Quadrax or Differential Twinax 32 12 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 16 20 22D Amphenol Aerospace How to Order 38999, Series III Circular With Quadrax 100 Ohm Contacts Amphenol Tri-Start, 38999 Series III* Connectors can be ordered with the following popularly used Quadrax contacts: 100 ohm quadrax 21-033385-051 socket contacts 100 ohm quadrax 21-033384-051 pin contacts Use the following coded number ordering procedure : 1. 2. Connector Type 3. Shell Type TVP Service Class 00 4. Shell Size - Insert Arrangement RQW 5. 21-75 Step 1. Select a Connector Type TV Tri-Start Series Connector with metal shells TVP Back panel mounted receptacle with metal shells CTV Tri-Start Series Connector with composite shells CTVP Back panel mounted receptacle with composite shells Step 2. Select a Shell Style 00 Wall mount receptacle 02 Box mount receptacle available only with the PCB tails and epoxy backfilled (non-removable) 06 Straight plug 07 Jam nut receptacle 6. Contact Type For ordering of connectors with any other quadrax contacts or differential twinax contacts, please consult Amphenol Aerospace for part numbers. Alternate Keying Position P B Step 6. Select an Alternate Keying Position Locksmith keying-rotation of minor keys. See Series III Alternate Positions below "N" not required for normal position Tri-Start Alternate Positions A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. MAIN KEYWAY RECEPTACLE (front face shown) AR BSC BR BSC DR BSC CR BSC PLUG (front face shown) Electroless nickel plated RGQF Electroless nickel plated ground plane RQW Olive drab cadmium plate CP BSC NiAlBronze RGQB NiAlBronze ground plane RQK Corrosion resistance stainless steel RGQK Stainless steel ground plane QDT Durmalon plated, Nickel-PTFE alternative to cadmium GQDT Groundplane Durmalon Step 4. Select a Shell Size and Insert Arrangement See insert arrangements available with quadrax contacts on preceding pages. Shell Size and Insert Arrangements are together in one chart. First number represents Shell Size, second number is the Insert Arrangement Key & Keyway Arrangement Identification Letter AR or AP BSC BR or BP BSC CR or CP BSC DR or DP BSC 9 N A B C D E 105 102 80 35 64 91 140 132 118 140 155 131 215 248 230 205 234 197 265 320 312 275 304 240 11, 13, and 15 N A B C D E 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 17 and 19 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 21, 23, and 25 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 25L, 33, and 37 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 188 188 188 188 188 188 293 310 244 257 280 272 Step 5. Select Contact Type P Pin contacts S Socket contacts DP BSC Shell Size RGQW Olive drab cadmium plated ground plane RQB AP BSC BP BSC Step 3. Select a Service Class with Quadrax RQF MAIN KEYWAY * The incorporation of quadrax or differential twinax contacts requires a modified connector to accommodate keyed contacts. For more information on Tri-Start, MIL-DTL-38999 Series III connectors see the section in this catalog. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 33 Amphenol Aerospace Coaxial Contacts for MIL-DTL-38999 General Description Amphenol(R) Coaxial Contacts -Offer several advantages for reliable interconnection and continued performance: * Large crimping area assures low contact resistance and high tensile strength * Back insulator positively captivates inner contact against axial loads * Front insulator provides closed entry for socket inner contact * Recessed inner contact is protected * Outer contact has rugged wall section for durability TYPICAL SUBMINIATURE COAX SOCKET CONTACT has socket outer contact with a pin inner contact TYPICAL SUBMINIATURE COAX PIN CONTACT has pin outer con tact with a socket inner contact Jacket Insulation MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type, Coax Size 12 Socket Assembled Contact Braid Center Conductor Cable Illustration - Coax Contact Coax Contacts are gold plated, crimp termination MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type, Coax Size 16 Pin Unassembled Contact MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type, Coax Size 8 Pin Assembled Contact Finish of mating contacts parts: supplied with 0.000050 min. gold over nickel on mating parts. Other finishes are available; consult Amphenol for further information. Coax Size 12 & 16 Contact Performance: * Typical VSWR: 1.5:1 maximum up to 700 MHz and 500 MHz respectively, for properly cabled size 12 and 16 coaxial contacts in the M38999 Series I, II and III * Insulation Resistance: 5,000 megohms minimum @ 25C * Dielectric Withstanding Voltage: Size 12: 1,000 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ft. Size 16: 800 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ft. * Contact Resistance: See MIL-C-39029/27, /28, /75, /76, /77, /78 Coax Size 8 Contact Performance: * Typical VSWR when terminated to specified 50 ohm cable: 1.5:1 maximum up to 3 GHz (excluding 21-033101/2-27) * Insulation Resistance: 5,000 megohms minimum @ 25C * Dielectric Withstanding Voltage: 1,300 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ft. * Contact Resistance: See MIL-C-39029/59, /60 MIL-DTL-38999 LJT-R, JT-R, TV-R, SJT-R MS Type, Coax Size 8 Socket Unassembled Contact 34 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Coaxial Contacts for MIL-DTL-38999 Application Data JT-R Series, MIL-DTL-38999 Series II, SAE AS39029 (27, 28, 76, 78) COAX CONTACTS FOR USE IN JT-R CONNECTORS Contact Part Number Cable (Termination Instruction Sheet)** RG-178B/U, RG-196A/U Haveg 30-00761, 30-02024, 30-02033 Tensolite 24713/A955KK1, 26723/ A955KK1 Haveg 61-02051 Socket 21-033121-564 (M39029/78-433) 21-033122-562 21-033121-562 (L-2035-AG) (L-2035-AN) RG-180B/U, RG-195A/U, Raychem 9528A1318 Raychem 5022E5111 Raychem 9530A5314 Raychem 9527A1318 (L-2035-AP) 21-033121-561 21-033122-563 (M39029/76-424) 21-033121-563 (M39029/78-432) 21-033122-546 (M39029/28-211) 21-033121-546 (M39029/27-210) (L-2035-AD) (L-2035-F) 21-033121-543 21-033122-544 21-033121-544 21-033122-545 21-033121-545 21-033122-547 21-033121-547 (L-2035-U) (L-2035-X) Crimp Ferrule Insertion Removal M81969/8-08 or M81969/14-03 or Amphenol 11-8675-16 11-8795-16 or MS27495R16 or MS27534-16 M81969/8-10 or M81969/14-04 or Amphenol 11-8675-12 11-8795-12 or MS27495R12 or MS27534-12 16 M22520/2-01 with Positioner M22520/2-35 or with Daniels Positioner K532 M22520/4-01 with Positioner M22520/4-02 M81969/8-07 or M81969/14-03 or Amphenol 11-8674-16 11-8794-16 or MS27495A16 or MS27534-16 12 M22520/31-01 with Positioner M22520/2-01 M22520/31-02 with Positioner or M22520/2-34 Daniels GS-200 or with Tool Daniels Positioner with Positioner K323 G2P330 M81969/8-09 or M81969/14-04 or Amphenol 11-8674-12 11-8794-12 or MS27495A12 or MS27534-12 (L-2035-G) 21-033122-543 (L-2035-R) Installation Tools (L-2035-AE) 21-033121-541 (M39029/27-402) (L-2035-M) Inner Contact (L-2035-AL) 21-033122-541 (M39029/28-409) (L-2035-C) Crimping Tools (L-2035-AH) 21-033122-561 (L-2035-AK) RG-174A/U, RG-188A/U, RG-161/U, RG-187A/U, RG-316/U, RG-179B/U, Haveg 8100207, Times (HS-179) AA3248, Teledyne 11299, Raychem 7528H1424 Gore GWN1159A Pin 21-033122-564 (M39029/76-425) Contact Size (L-2035-E) (L-2035-N) (L-2035-S) (L-2035-V) (L-2035-Y) MIL-DTL-38999 CONTACT DATA All contacts mate with other contacts in this series which have the same inner and outer contact diameters. NOTE: SAE AS39029 supersedes MIL-C-39029 **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp JT Example: Socket 21-033121-564 on RG-196A/U cable will mate with pin 21-033122-563 on RG-188A/U cable which is used in both this and the LJT-R series. LJT, TV, SJT, Amphe-Lite Example: Socket 21-033123-564 on RG-196A/U cable will mate with pin 21-033122-563 on RG-188A/Ucable which is used in both this and the JT-R series. Finish of mating contact parts: Contact part numbers shown in the chart above are supplied with 0.000050 min. gold (Knoop hardness 130-200) over nickel on mating parts. Other finishes are available; consult Amphenol. Daniels crimping tools are available from: Daniels Mfg. Corp. 6103 Anno Ave., Orlando FL 32809 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 35 Amphenol Aerospace Coaxial Contacts for MIL-DTL-38999 Application Data, cont. LJT-R, MIL-DTL-38999 Series I; TV-R, MIL-DTL-38999 Series III; Amphe-Lite and SJT-R Series, SAE AS39029 (28, 59, 60, 75, 76, 77) COAX CONTACTS FOR USE IN LJT-R, TV-R, AMPHE-LITE AND SJT-R CONNECTORS Contact Part Number Contact Size Cable Pin 21-033122-564 (M39029/76-425) Socket 21-033123-564 (M39029/77-429) Haveg 30-00761, 30-02024, 30-02033 Tensolite 24713/A955KK1, 26723/A955KK1 21-033122-562 21-033123-562 Haveg 61-02051 21-033122-561 21-033123-561 RG-174A/U, RG-188A/U, RG-316/U, RG-161/U RG-187A/U, RG-179B/U, Haveg 8100207, Times (HS-179) Raychem 7528H1424 AA3248, Teledyne 11299 21-033122-563 (M39029/76-424) 21-033123-563 (M39029/77-428) 21-033122-546 (M39029/28-211) 21-033123-546 (M39029/75-416) RG-180B/U, RG-195A/U, Raychem 9528A1318 21-033122-541 (M39029/28-409) 21-033123-541 (M39029/75-417) Raychem 5022E5111 21-033122-543 21-033123-543 Raychem 9530A5314 21-033122-544 21-033123-544 Raychem 9527A1318 21-033122-545 21-033123-545 Raychem 9527A1314 21-033122-585 21-033123-585 Gore GWN1159A, Nexans RG179-DT 21-033122-547 21-033123-547 M/A-Com 5M2869-001 21-033122-589 21-033123-589 RG-178B/U, RG-196A/U RG-187A/U, RG-179B/U, RG-174A/U, RG-188A/U, RG-316/U, RG-161/U Haveg 8100207, Times (HS-179)AA3248, Teledyne 11299 (L-2035-AG) (L-2035-AN) (L-2035-AK) (L-2035-AD) (L-2035-F) (L-2035-C) (L-2035-M) (L-2035R) (L-2035-U) (L-2035-GG) (L-2035-X) (L-2035-GR) 21-033102-023 (L-1107-C) Inner Contact 21-033102-024* (L-1107-D) (L-2035-AR) 16 (L-2035-AM) Installation Tools Insertion Removal M22520/2-01 with Positioner M22520/2-35 or with Daniels Positioner K532 M22520/4-01 with Positioner M22520/4-02 M81969/8-07 M81969/8-08 or or M81969/14-03 M81969/14-03 or or Amphenol Amphenol 11-8674-16 11-8675-16 11-8794-16 11-8795-16 or or MS27495A16 MS27495R16 or or MS27534-16 MS27534-16 M22520/2-01 with Positioner M22520/2-34 or with Daniels Positioner K323 M22520/31-01 with Positioner M22520/31-02 or Daniels GS-200 Tool with Positioner G2P330 M81969/8-09 M81969/8-10 or or M81969/14-04 M81969/14-04 or or Amphenol Amphenol 11-8674-12 11-8675-12 11-8794-12 11-8795-12 or or MS27495A12 MS27495R12 or or MS27534-12 MS27534-12 M22520/2-01 with Positioner M22520/2-31 or solder M22520/5-01 with die set M22520/5-03 (A) or M22520/5-08 (A) M22520/5-35 (B) or M22520/10-01 with Die Set M22520/10-05 (A) M22520/5-01 with die set M22520/5-05 (A) or M22520/5-19 (B) or M22520/10-01 with Die Set M22520/10-07 (A) (L-2035-AF) (L-2035-H) (L-2035-D) (L-2035-P) (L-2035-T) 12 (L-2035-W) (L-2035-GH) (L-2035-Z) (L-2035-GT) 21-033101-023 (L-1107-G) 21-033101-024* (L-1107-H) NOTE: SAE AS39029 supersedes MIL-C-39029 CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. CHART CONTINUES ON NEXT PAGE 36 Crimp Ferrule (L-2035-AJ 8 RG-142B/U, RG-223/U Crimping Tools Hand inserted 11-9170 or MS Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable. When inner contact is installed by crimping only. 11-10134 Expander Tool Kit must be used to assemble rear insulator over contact. **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Coaxial Contacts for MIL-DTL-38999 Application Data, cont. LJT-R, MIL-DTL-38999 Series I; TV-R, MIL-DTL-38999 Series III; Amphe-Lite and SJT-R Series, SAE AS39029 (28, 59, 60, 75, 76, 77), cont. COAX CONTACTS FOR USE IN LJT-R, TV-R, AMPHE-LITE AND SJT-R CONNECTORS, CONT. Contact Part Number Cable Haveg 51-03111, Tensolite 28895/2X1 RG-180B/U, RG-195A/U, Raychem 9528A1318 (Termination Instruction Sheet)*** Pin Socket 21-033102-022 21-033101-022 (L-1107-B) 21-033102-021 (M39029/60-367 Supersedes MS27536) (L-1107-A) RD-316 Double Shield (M17/152-00001) Raychem 7524D5111-9 (triax cable - contact will terminate inner coax portion only) (L-1107-F) 21-033101-021 (M39029/59-366 Supersedes MS27535) 21-033101-025 21-033102-026 21-033101-026 (L-1107-M) (L-1107-N) Crimp Ferrule M22520/2-01 with Positioner M22520/2-31** or solder M22520/5-01 with die set M22520/5-05 (B) or M22520/5-41 (B) or M22520/10-01 with Die Set M22520/10-07 (B) M22520/2-01 with Positioner M22520/2-31 M22520/5-01 with Die Set M22520/5-37 (B) or M22520/10-01 with Die Set M22520/10-15 (A) 8 21-033102-027 21-033101-027 RG-58 (M17/155-00001), M17/028-RG-058 RG303 Times LMR-195-UF 21-033102-029 21-033101-029 21-033102-036 21-033101-036 21-033102-037 21-033101-037 5022A1311-0 21-033102-039 21-033101-036 FA-19X 21-033652-001 21-033653-001 T Flex-402 Utiflex UFB142G 21-033102-041 21-033101-041 5M2869-001 ESC432101 BMS13-65 Inner Contact (L-1286-B) (L-1107-AA) (L-1107-P) (L-1107-V) (L-1107-AC) (L-2091-A) (L-1107-AG) Installation Tools Insertion Removal Hand inserted 11-9170 or MS (L-1107-M) RG-400, ECS3C058A ECS352001 ECS432101 5021D1331-0 Crimping Tools (L-1107-E) 21-033102-025 (L-1107-J) Contact Size (L-1293-B) (L-1107-Y) M22520/2-01 with Positioner M22520/2-10 Solder (L-1107-Q) (L-1107-W) M22520/2-01 with Positioner M22520/2-31 (L-1107-AB) (L-2091-B) (L-1107-AF) NOTE: SAE AS39029 supersedes MIL-C-39029 NOTE: Contacts can be ordered by part numbers given in chart CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. M22520/2-01 with Positioner K1106 Solder M22520/5-01 with Die Set M22520/5-45 (A) M22520/5-01 with Die Set M22520/5-05 (B) M22520/5-01 with Die Set M22520/5-05 (B) or M22520/10-01 with Die Set M22520/10-07 (B) M22520/5-01 with Die Set Y25 (B) M22520/5-01 with Die Set M22520/5-05 (B) Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable ** When inner contact is installed by crimping only. 11-10134 Expander Tool Kit must be used to assemble rear insulator over contact. ***Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 37 Amphenol Aerospace Matched Impedance Coaxial Contacts for MIL-DTL-38999 Amphenol(R) Matched Impedance Size 12 Coaxial Contacts for RF/Microwave, High Frequency and High Performance Requirements The matched impedance coax contact is available in size 12. It incorporates a captivated inner contact which "snaps into" the outer contact preventing displacement or pull back of the inner contact in situations where the cable may be bent. TYPICAL MATCHED IMPEDANCE COAX SOCKET CONTACT has socket outer contact with a captivated pin inner contact TYPICAL MATCHED IMPEDANCE COAX PIN CONTACT has pin outer contact with a captivated socket inner contact Design features and benefits of the Matched Impedance: * For use in 90 degree angle or bent cable applications * Provides 50 ohm matched impedance resulting in low VSWR and low insertion loss * Frequency range for a mated pair extends to 3 GHz and beyond, higher than other coaxial contacts previously offered. * Ideally suited for D38999 high performance and MIL-STD-1760 high band coaxial contact requirements Matched Impedance Coax Contact Performance: High Performance Size 12 Coax 50 Ohm matched Electrical Specifications: LJT-R, MIL-DTL-38999 Series I, JT-R, MIL-DTL-38999 Series II, and TV-R, MIL-DTL-38999 Series III Use with Cable RG316, T-Flex-405 Semflex SM405 RG-316, T-Flex-405 RD316, Filotex, ET124962, M17/152-00001 Comment M39029/102/103 Pin Socket 21-033651-011 21-033650-011 (Termination Instruction (Termination Instruction Sheet)*** Sheet)*** (L-2092-C) JT-R, MIL-DTL-38999 Series II M39029/102/103 Type (L-2092-C) 21-033729-011 (L-2092-P) 21-033651-017 (L-2092-F) 21-033650-017 (L-2092-F) 21-033214-042 JN1104*50C 21-033213-042 PAN6841*50C 21-033651-012 21-033650-012 RG178, Gore CXN 3403 M39029/102/103 Type 21-033651-018 21-033650-018 RG178, Gore CXN 3403 JT-R, MIL-DTL-38999 Series II JN1088WT PAN6422XQ (L-2092-E) (L-2092-K) (L-2092-D) (L-2092-K) 21-033729-018 * * * * * * Contact impedance = 50 ohms nominal Frequency range = 0-3 GHz Operable at higher frequencies depending on cable selection. Consult Amphenol for details. Dielectric withstanding voltage (for a mated pair): At sea level = 1000 VRMS At 50, 000 ft. = 250 VRMS Insulation resistance: 5 gigaohms min. @ 25C VSWR: 1.20 + .04F (F in GHz) max. up to 3 GHz Insertion Loss: .11 fGHz dB max. Environmental Specifications: * Thermal limits: -55 to 200C Mechanical Specifications: * Mating: slide-on * Mounting: conforms to M39029/102 & /103 envelope dimensions (L-2092-K) 21-033650-022 SFT-316-TR M39029/102/103 Type 21-033651-022 Semflex SW060 M39029/102/103 Type 21-033651-025 21-033650-025 Semflex SW086 (solid inner conductor) M39029/102/103 Type 21-033651-026 21-033650-026 (L-2092-N) (L-2092-N) * Add P or S for pin or socket ** *Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp 38 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Typical Contact Installation Instructions for Coax Contacts The following is an example of a contact instruction sheet that would be shipped within the package of contacts for a Crimp, Size 12 Coax Contact for use in Subminiature, D38999 connectors. The sheet provides detailed instructions for assembling the component parts and for crimping the contact to coaxial cable, along with the recommended cable and tooling to be used. Installation instructions are included within all contacts for D38999 connectors. For installation instructions for other connector series, there are separate documents (not included in packaging of parts) as follows: L- 633 for Miniature solder types, L-613 for Miniature SE types, L-660 for Miniature CE types, and L-650 for MS/Standard and Heavy Duty types. For any other instructions needed, consult Amphenol. Most installation instructions can be found on-line at www.amphenol-aerospace.com (from home page, go to Service Instructions and enter contact part number or instruction sheet number). 21-033651-011 (PIN) 21-033650-011 (SOCKET) 21-033651-011 (PIN) 21-033650-011 (SOCKET) Contact, Pin and Socket, Coaxial, Type LJT-R & TV-R, (MIL-DTL-38999 Series I & III) Crimp, Size 12 Installation Instructions See table on reverse side for coaxial cable recommended and crimp tool information. A. 1. Slide outer crimp ferrule over cable outer jacket as shown. 2. Strip cable outer braid as illustrated. Ends must be cut cleanly and at right angles to the axial plane of the cable. The cable must not be deformed while making cuts. 3. Flare outer braid, then strip cable dielectric as shown. B. 1. Assemble inner contact assembly over cable center conductor and cable dielectric until inside bore of bushing butts against cable dielectric. 2. Cable center conductor must be visible through the inspection hole in the inner contact wire well. 3. Crimp inner contact wire well using crimp tool listed in table. C. 1. Carefully slide outer contact assembly over inner contact assembly and under cable outer braid until inner contact butts against insulator shoulder as illustrated. (Inner contact assembly will snap into the locked position when fully assem bled inside the outer contact assembly.) 2. Bring outer crimp ferrule forward over cable outer braid as illustrated. (Continue to push the inner contact assembly fully forward while bringing the outer crimp ferrule into position.) 3. Crimp outer crimp ferrule using crimp tool listed in table ( .156 Max. over ferrule after crimping). Trim excess braid ahead of crimp ferrule, if necessary. CONTACT INSERTION INTO CONNECTOR Using insertion tool (part number M81969/8-09 or M81969/14-04), insert contact assembly into rear connector grommet hole. Contact must be aligned with hole and not inserted at an angle. Push forward until contact is felt to snap into position within insert. Remove tool. .330 REF. .135 OUTER CRIMP FERRULE CABLE OUTER JACKET .195 A1 & A2 CABLE DIELECTRIC CABLE OUTER BRAID CABLE OUTER BRAID .165 A3 CABLE CENTER CONDUCTOR CABLE DIELECTRIC .165 REF. CABLE CENTER CONDUCTOR CABLE DIELECTRIC INNER CONTACT ASSEMBLY (SOCKET SHOWN FOR REFERENCE) B INSPECTION HOLE CABLE DIELECTRIC MUST BUTT BUSHING .010 / .030 OUTER CONTACT ASSEMBLY (PIN SHOWN FOR REFERENCE) OUTER FERRULE C CABLE OUTER BRAID INNER CONTACT MUST BUTT INSULATOR CONTACT REMOVAL FROM CONNECTOR Position removal tool (part number M81969/8-10 or M81969/14-04) around cable and slide tool down wire until tool tips enter rear grom met and come to a positive stop. Hold tool tip firmly against positive stop on contact, grip wire and simultaneously remove tool, contact and cable. L-2092-C October 2001 FSCM77820 Tools Amphenol (R) Part Number 21-033651-011 21-033650-011 Description Coaxial Cable Accommodated Inner Contact Crimp Tool RG316 Matched Impedance* (M17/113-RG316) MH992 (Daniels) Size 12 Coax RG179 Pin MH992 (Daniels) (M17/094-RG179) RG316 Matched Impedance* (M17/113-RG316) MH992 (Daniels) Size 12 Coax RG179 Socket MH992 (Daniels) (M17/094-RG179) Outer Contact Positioner Setting (Daniels) 5 K1360 4 K1360 5 K1360 4 K1360 Tool Positioner M22520/5-01 M22520/5-03 (A) or M22520/5-35 (B) * Matched Impedance applies when contacts are terminated to RG316 cable only. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 39 Amphenol Aerospace High Frequency Contacts for MIL-DTL-38999 Series III Circular General Description Amphenol(R) High Frequency Contacts Amphenol and SV Microwave (an Amphenol company) offer DC to 40 GHz high frequency size 8, 12 and 16 coaxial contacts for the D38999 Series III housing and standard inserts. These contacts allow any application to continue to use the D38999 connector and be able to expand the use to include the microwave transmission lines. Features include: * * * * * Superior electrical performance and high frequency capability Blindmate advantage and maintance of an accurate phase length when mated Can be terminated to a multiple of cable types depending on the application Uses standard interfaces based on MIL-STD-348, and can be installed in any MIL-DTL-38999 size 8, 12 or 16 insert Unique "Float Mount" technology allows for consistent microwave performance while maintaining tight mechanical tolerances Subminiature MIL-DTL-38999 Series III Connector with Size 8 High Frequency Contacts HIGH FREQUENCY CONTACTS SPECIFICATIONS Electrical (Mated pair size 8 - RG 405 Semi-Rigid Cable) Impedance Frequency Range VSWR Insertion Loss Insulation Resistance (Min.) Contact Resistance (Max.) Center conductor: outer conductor: outer to cable: Dielectric Withstanding Voltage Corona Extinction Voltage RF High Potential Voltage RF Leakage 50 W DC - 40 GHz 1.05 +.01 (freq. GHz) 0.03. (freq. GHz) 10,000 M W 6.0 mW 3.0 mW 0.5 mW 1,000 VRMS 250 VRMS 500 VRMS - (80-freq. GHz) HIGH FREQUENCY COAX CONTACTS FOR USE IN D38999, SERIES III CONNECTORS High Frequency Amphenol Part Number (Termination Instruction Sheet) For use with Cable BMZ 40 GHZ TFLEX-405 21-033448-001HF (300-17-008) BMZ 21-033448-002HF 18 GHZ TFLEX-405 21-033449-003HF (300-89-008) BMZ 21-033448-003HF 12 GHZ RG-400/ RG-142 (300-89-008) BMZ 18 GHZ 8 21-033321-009 8 21-033321-010 8 21-033321-007 8 21-033321-010 8 21-033321-008 12 N/A 16 N/A Pin Socket BMA 21-033448-006HF 26.5 GHZ TFLEX-405 Pin 21-033449-007HF Socket BMA 21-033448-007HF 26.5 GHZ TFLEX-402 Pin BMZ75 Ohm 2 GHZ SMPM 65 GHZ LMR-24075 21-033449-009HF Socket Pin Socket TFLEX-405 Pin 21-033449-010HF SMPS 65 GHZ 0.047 Dia. Cable Socket Pin Temperature Range -65C to +125C Corrosion (Salt Spray) MIL-STD-202, Method 101, Condition B Vibration MIL-STD-202, Method 204, Condition D, 20 Gs Shock MIL-STD-202, Method 213, Condition 1, 100 Gxs Thermal Shock MIL-STD-202, Method 107, Condition B, -65C to +125C Moisture Resistance MIL-STD-202, Method 106, Less step 7B Barometric Pressure (Altitude) MIL-STD-202, Method 105, Condition C, 70,000 ft. 40 21-033321-007 Pin 21-033449-006HF 21-033448-010HF 8 Socket TFLEX-402 (300-89-002) 21-033448-009HF 21-033321-007 Socket (300-89-002) 21-033448-008HF 8 Pin (300-89-009) 21-033449-008HF Piggyback Grommet Socket (300-89-009) 21-033448-004HF Cavity Size Pin 21-033449-002HF Body and Sleeve Type Socket (300-17-008) Materials and Finish Environmental Frequency 21-033449-001HF 21-033449-004HF Stainless steel per AMS-5640 Alloy UNS S30300 Type 1 Brass per ASTM B16, Ferrule Alloy UNS C36000 Beryllium copper per ASTM Contact & Lock Ring B196 Alloy UNS C17300, Td04 PTFE per ASTM D1710, Insulator Type 1, Grade 1, Class B Spring Stainless steel per ASTM A313 Type 631 Rear Body & Contacts Gold per ASTM B488 Type II, Code C, Class 1.27; over Nickel per AMS-QQ-N-290 Class 1 (60 inches); over Copper per MIL-C-14550 (10 inches) Passivated per AMS-2700, Type 2 Interface Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Twinax Contacts for MIL-DTL-38999 General Description, Application Data - Size 10 &12 Amphenol(R) Twinax Contacts -Were designed for use with twinax cable in Data Bus systems. Twinax contacts provide the following benefits: * Protection from magnetic interference * Protection from electrostatic interference including nuclear electromagnetic pulse * Meets parameters defined by MIL-STD-1553B * Maintains shield integrity through a multi-pin circular connector and does not require contact polarization within the insert Jacket Braid Insulation SIZE 10 & 12 CONCENTRIC TWINAX CONTACTS Center Conductor Cable Illustration - Twinax Contact The size 12 concentric twinax contact interface was developed for JN1104 EuroFighter contacts, and can be used in any size 12 cavity M38999 I, II or III or SJT connector. Features: * Operating temperature -55C to 175C * Pins are scoop-proof * Meets performance levels of M38999 connector * 4 components, gold plated crimp termination * For use with a variety of cables (See chart below) Concentric Twinax Contacts Size 12 TYPICAL ELECTRICAL PERFORMANCE Size 10 & 12 Concentric Twinax Contacts Voltage Rating: 500 Vrms max. @ sea level Contact Resistance: Center @ 1 Amp, 55 millivolts max. voltage drop @ 25C Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25C Outer @ 12 Amps, 85 millivolts max. voltage drop @ 25C Operating Frequency: 0-30 MHz Dielectric Withstanding Voltage: Center to Intermediate 800 VAC Rms @ Sea Level Intermediate to Outer 500 VAC Rms @ Sea Level Unassembled Components of Size 12 Concentric Twinax Contact SIZE 10 & 12 CONCENTRIC TWINAX CONTACTS FOR USE IN D38999 CONNECTORS For use with Cable Concentric Twinaxial Contact Part Number (Termination Instruction Sheet)** Pin 21-033909-025 21-033908-025 0024A0024, Fileca F2709-13-CA 21-033909-028 21-033908-028 EPD32263A,10612, GSC-12-2548-00 ASNE0849, 5PTM1T04-1 21-033909-029 21-033908-029 VG95218T023D002 21-033909-091 21-033908-091 VG95218T023D002 21-033909-101 21-033908-101 (L-2092-G) (L-2092-H) (L-2092-AC) (L-2092-AC) Connector Series (L-2092-G) (L-2092-G) (L-2092-H) 21-033909-081 21-033908-081 (L-2092-AB) Comments Socket M17/176-00002, ST5M1212-002, TWC-78-1 (L-2092-G) Contact Size JN1104 Interface 12 D38999 Series I, III (L-2092-AB) (L-2092-AC) Same as -91 except new ferrule with wire support (L-2092-AC) M17/176-00002, GSC-12-2549-00 21-033640-025 0024A0024 21-033640-028 5M2022-003 21-033844-001 21-033843-001 (L-2092-W) 12 JN1104 Interface D38999 Series II 10 Supplied with Thermal fit sleeve D38999 Series I, III (L-2092-V) (L-1255-A) (L-1255-B) **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 41 Amphenol Aerospace Twinax Contacts for MIL-DTL-38999 General Description, Application Data - Size 8 High performance connectors within the D38999 families are the most commonly used connectors for incorporation of Twinax contacts. These connectors offer wide versatility in insert arrangements for not only concentric Twinax contacts, but also coax, triax, PCB, wire wrap, thermocouples and EMI filter contacts. Other connectors available with concentric Twinax contacts: * Wire Integrated Connectors (WICS) for Data Bus Systems. Consult Amphenol Aerospace, Sidney, NY. * ARINC 404, ARINC 600 and R27 Series rectangular connectors. Supplied by Amphenol Canada. SIZE 8 CONCENTRIC TWINAX CONTACTS The size 8 concentric Twinax contact was developed for use in MILSTD-1553 Airborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connectors. Ideal for this application need is the high performance Tri-Start connector with its fully scoop-proof feature of recessed pins. The concentric Twinax contact is crimp terminable to twisted shielded cable. Features include: MIL-DTL-38999 Series III Connector with Twinax Contacts and Standard Contacts * Provides protection from magnetic and electrostatic interference including nuclear electromagnetic pulse * Maintains shield integrity through a multi-pin circular connector and does not require contact polarization within the insert * 175C rated and meets performance levels of MIL-DTL-38999 Series III connectors * MIL-C-17/176-00002 cable termination * Gold plated full crimp termination contacts qualified to M39029/90 & /91 * Integral part of the MIL-STD-1760 interconnection system * Also available in modified but intermateable versions for termination to a host of cables (See chart on next page) Concentric Twinax Contacts Size 8 TYPICAL ELECTRICAL PERFORMANCE Size 8 Concentric Twinax Contacts Voltage Rating: 500 Vrms max. @ sea level Contact Resistance: Center @ 1 Amp, 55 millivolts max. voltage drop @ 25C Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25C Outer @ 12 Amps, 75 millivolts max. voltage drop @ 25C Operating Frequency: 0-20 MHz Dielectric Withstanding Voltage: Center to Intermediate: 1000 VAC Rms @ Sea Level Intermediate to Outer: 500 VAC Rms@ Sea Level SHORT PROFILE TWINAX CONTACT OPTION A Short Profile size 8 Twinax is available that can be used with a low profile right angle backshell and can offer increased packaging efficiency. Consult Amphenol Aerospace for further information. Short Profile Twinax vs Standard Length Twinax Contact 42 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Twinax Contacts for MIL-DTL-38999 General Description, Application Data - Size 8, cont. Amphenol Aerospace SIZE 8 CONCENTRIC TWINAX CONTACTS FOR USE IN D38999 CONNECTORS Size 8 Concentric Twinaxial Contact Part Number (Termination Instruction Sheet)** For use with Cable M17/176-00002 Pin Socket 21-033190-625 21-033191-628 M17/176-00002, 5PTM1T04-2 21-033190-529 21-033191-530 M17/176-00002 T3-46T08-LD T3-47T08-LD (PN-430) Comments AS39029/113-625 & /114-628 (Amphenol) Supplied with heat shrink seal AS39029/90/91 (Amphenol) Supplied with heat shrink seal M39029/90/91 (Pyle) Supplied with heat shrink seal M17/176-00002 21-033190-000 21-033191-000 (L-1253-B) Without seals M17/176-00002 21-033190-001 21-033191-001 Supplied with piggyback grommet seal Raychem 10612, 5M2022-003 21-033190-026 21-033191-026 21-033190-022 21-033191-022 (L-1253-D) Without seals 21-033190-027 21-033191-027 (L-1253-L) Supplied with heat shrink seal 21-033190-029 21-033191-029 (L-1253-L) Supplied with piggyback grommet seal 21-033190-030 21-033191-030 (L-1253-L) Without seals 21-033190-040 21-033191-040 (L-1253-T) Supplied with heat shrink sleeve Axon P517417 21-033190-081 21-033191-081 Supplied with piggyback grommet seal Raychem 10612, 5M2022-003 21-033190-261 21-033191-261 Raychem 10612, 5M2022-003 21-033190-262 21-033190-262 Raychem 10614, 7724C8664 T3-46TB08-LD T3-47TB08-LD (PN-494) Without seals 7820D0111 (20 AWG) T3-467C08-LD T3-47TC08-LD (PN-537) Without seals Gore CXN2268 T3-46TE08-LD T3-47TE08-LD M17/176-00002 T3-46TD08-LD T3-47TD08-LD M17/176-00002 21-033910-015 21-033922-015 M17/176-00002 21-033617-001 Gore CNX2702 T3-46TF08-LD Short profile Supplied with heat shrink seal (.465) Short profile Supplied with heat shrink seal (.465) Short profile Without seals (.263) Short profile Supplied with piggyback grommet seal (.465) Short profile Supplied with heat shrink seal (.465) (L-1253-AG) (L-1253-A) (PN-430) (L-1253-A) (L-1253-A) (L-1253-AA) Raychem 10614, EPD22189B, 7724C8664, 05A0771, GC875TM24H, T10971 Raychem 10613, PAN711-6421, 23089/RC Raychem 10613, PAN711-6421, 23089/RC Raychem 10613, PAN711-6421, 23089/RC GSC-12-2548-00, 7726D0664, ASNE 08072003-09 (L-1253-C) (L-1253-K) (L-1253-K) (L-1253-K) (L-1253-S) (L-1253-W) (L-1253-AA) (L-1253-AA) (PN-494) (PN-537) (PN-1001) (PN-1000) (PN-1005) (PN-1002) S280W502-1, Fileca F2709-13-CA, HS5930, Raychem 10602 0024G0024, 0024A0024 S280W502-1, Fileca F2709-13-CA, HS5930, Raychem 10602 0024G0024, 0024A0024 Tensolite 24463/9P025x-2(LD) S280W502-1, Fileca F2709-13-CA, HS5930, Raychem 10602 0024G0024, 0024A0024 0024A0311, PIC E1024 0024A0311, PIC E1024 M17/176-00002 (L-1253-B) (L-1253-B) (L-1253-Y) (PN-1001) (PN-1000) (PN-1005) (REF PN-100) T3-47TF08-LD (PN-1002) Without seals Supplied with piggyback grommet seal Supplied with heat shrink seal P-209546-27 Short profile Without seals (.303) 21-033190-070 21-033191-070 (L-1253-V) Without seals 21-033190-071 21-033191-071 (L-1253-V) Supplied with piggyback grommet seal 21-033190-072 21-033191-072 (L-1253-V) Supplied with heat shrink seal 21-033190-090 21-033191-090 (L-1253-AD) Without seals 21-033190-091 21-033191-091 (L-1253-AD) Supplied with piggyback grommet seal 21-033190-092 21-033191-092 (L-1253-AD) Supplied with heat shrink seal 21-033190-625 21-033191-628 M39029/113-625 & /114-628 Supplied with heat shrink seal M17/176-00002 0024A0311, PIC E10244 (L-1253-AG) (L-1253-U) (L-1253-U) (L-1253-U) (L-1253-AG) (L-1253-AG) Connector Series D38999 Series I, III **Termination instructions are packaged with each contact and can be foundon-line at: www.amphenol-aerospace.com/serviceinstructions.asp Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 43 Amphenol Aerospace Triax Contacts for MIL-DTL-38999 General Description, Application Data Amphenol(R) Triax Contacts -Provide additional shielding when terminated to triax cable having solid or stranded center con ductors. Amphenol supplies triax contacts in sizes 8, 10 and 12 and they are ideally suited for use in D38999 Series I, II and III circular connectors. Features and benefits of Amphenol triax contacts include: * Incorporates three conductors, designed for use with triax cable * Each of the three conductors are separated by dielectric insulation to isolate ground planes * Shielding effectiveness is improved with two isolated shields * May be specified for direct connection to printed circuit boards * May be mixed with coax, twinax and power contacts in a single connector Jacket Insulation Center Conductor Braid Cable Illustration - Triax Contact TYPICAL ELECTRICAL PERFORMANCE Size 8, 10 and 12 Triax Contacts Contact Resistance: Center @ 1 Amp, 120 millivolts max. voltage drop @ 25C Intermediate @ 1 Amp, 60 millivolts max. voltage drop @ 25C Outer @ 12 Amps, 90 millivolts max. voltage drop @ 25C Operating Frequency: Size 12: 0-30 MHz Size 10: 0-300 MHz Size 8: 0-500 MHz Triax Size 8 Pin Contact Dielectric Withstanding Voltage: Center to Intermediate 800 VAC Rms @ Sea Level Intermediate to Outer 500 VAC Rms @ Sea Level Insulation Resistance: 1000 megohms minimum @ 25C Triax Size 12 Socket Contact SIZE 8, 10 & 12 TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS Size 8, 10, 12 Triax Contact Part Number For use with Cable Size 5M2397-002, 81264-02, RGX-179, RT-179, Champlain 81-00321A, Tensolite 28883/02060X-1(LD), 7528A5314, Thermatics 12447, 28883/02060X-1, RTG 179, Semflex RT316 8 752866314, 7528G6314 8 5M2559-001, 81264-01, Tensolite 28598/9J063T-1, Teledyne 13809, Cheminax 9530F5214 8 ST5M1323-001, Champlain 81-00700, Teledyne 11914/1, Times AA6603, Tensolite 26895/90334X-1 8 5M2397-002 10 JN1088WU (75W), JN1088WT (50W) 12 GSC-03-81497-00 (75W) 12 GSC-03-81497-00 (75W) 12 Harbour TRX179, Times Microwave AA-6151 (RT-179), Axon RGX-179, 540-1050-000 (75W) 10602 (Twinax) 12 8 (Termination Instruction Sheet)** Pin Socket 21-033198-003 21-033197-003 21-033198-011 21-033197-011 21-033198-004 21-033197-004 21-033198-010 21-033197-010 21-033800-001 21-033801-001 21-033909-012 21-033908-012 21-033909-023 21-033908-023 21-033909-033 21-033908-033 21-033909-071 21-033908-071 (L-1254-F) (L-1254-V) (L-1254-D) (L-1254-S) (L-1256-A) (L-1256-J) (L-1256-M) (L-1256-P) (L-1256-AA) 21-033724-015 (L-1255-C) Comments (L-1254-E) (L-1254-T) (L-1254-C) (L-1254-S) (L-1256-B) JN1104 Interface (L-1256-J) (L-1256-M) Replaced by -33 with improved rear insulator (L-1256-P) JN1104 Interface (L-1256-AA) (Consult with Amphenol for availability) Special design with triax mating end and twinax cable termination **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp 44 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Coax,Twinax & Triax PC Tail Contacts General Description, Application Data Amphenol Aerospace Amphenol(R) Printed Circuit Tail Contacts are currently supplied as follows: * 8, 12 and 16 Coax * 8, 10 and 12 Twinax * 8 Triax (socket only) PC Tail shielded contacts provide a cost effective packaging solution for limited space applications where connectors are attached to printed circuit boards. High reliability is assured with factory pre-assembled contacts and standardization termination to the board. PC Tail contacts are available for MIL-DTL-38999 Series I and III circular connectors and also for ARINC 404, ARINC 600 and R27 rectangular connectors. The following pages (410 & 411) show the available PC Tail contact part numbers for 38999 Circular connectors. See page 420 Rectangular Section of this catalog for information on twinax contacts for ARINC Rectangular connectors along with compatible cable terminations. Consult Amphenol Aerospace for further information on the applicable tooling for these contacts. PC Tail Coax and Twinax Contacts for Attachment to Printed Circuit Boards TYPICAL ELECTRICAL PERFORMANCE Size 8, 12 & 16 PC Tail Coax Contacts Contact Resistance: Center @ 1 Amp, 55 millivolts max. voltage drop @ 25C Outer @ 1 Amp, 55 millivolts max. voltage drop @ 25C Operating Frequency: 0-500 MHz Dielectric Withstanding Voltage: Center to Outer 500 VAC Rms @ Sea Level Insulation Resistance 1,000 megohms minimum @ 25C TYPICAL ELECTRICAL PERFORMANCE Size 8, 10 & 12 PC Tail Twinax Contacts Contact Resistance: Center @ 1 Amp, 55 millivolts max. voltage drop @ 25C Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25C Outer @ 1 Amp, 55 millivolts max. voltage drop @ 25C Operating Frequency: 0-20 MHz Dielectric Withstanding Voltage: Center to Intermediate 500 VAC Rms @ Sea Level Intermediate to Outer 500 VAC Rms @ Sea Level Insulation Resistance 1,000 megohms minimum @ 25C Size 8, PC Tail Twinax Socket Contact for use in D38999 Connectors TYPICAL ELECTRICAL PERFORMANCE Size 8 PC Tail Triax Contacts Contact Resistance: Center @ 1 Amp, 55 millivolts max. voltage drop @ 25C Intermediate @ 1 Amp, 55 millivolts max. voltage drop @ 25C Outer @ 1 Amp, 55 millivolts max. voltage drop @ 25C Operating Frequency: 0-500 MHz Dielectric Withstanding Voltage: Center to Intermediate 500 VAC Rms @ Sea Level Intermediate to Outer 500 VAC Rms @ Sea Level Insulation Resistance 1,000 megohms minimum @ 25C D38999 Connector with PC Tail Coax Contacts, Sealing Plugs in unused contact cavities and PC Tail Alignment Disc Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 45 Amphenol Aerospace Coax, Twinax & Triax PC Tail Contacts Application Data, cont. PC TAIL COAX, TWINAX, AND TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS Size PC Tail Coax Contact Part Number PC Tail Twinax Contact Part Number PC Tail Triax Contact Part Number Tails* 8 Pin 21-033733-007 8 Pin 21-033733-002 PCB 2 tails For epoxy filled connector 8 Pin 21-033733-004 PCB 2 tails For epoxy filled connector 8 Pin 21-033733-005 PCB 4 outer tails, 1 inner 8 Pin 21-033733-009 PCB 2 tails 8 Pin 21-033733-008 PCB 2 tails 8 Socket 21-033426-001 PCB 2 tails PCB 2 tails 8 Pin 21-033967-115 PCB 3 tails 8 Pin 21-033967-125 PCB 3 tails 8 Pin 21-033967-015 PCB 3 tails 8 Pin 21-033967-045 PCB 3 tails 8 Pin 21-033967-055 PCB 3 tails 8 Pin 21-033967-065 PCB 3 tails 8 Pin 21-033967-085 PCB 3 tails 8 Pin 21-033967-095 PCB 3 tails 8 Pin P-209550 PCB 3 tails 8 Pin P-209532-1 PCB 9 tails 8 Pin P-209532-2 PCB 9 tails 8 Socket 21-033921-015 PCB 3 tails 8 Socket 21-033921-045 PCB 3 tails 8 Socket 21-033921-035 PCB 3 tails 8 Socket 21-033921-065 PCB 3 tails 8 Socket 21-033921-075 PCB 3 tails 8 Socket 21-033921-115 PCB 3 tails 8 Socket 21-033479-001 PCB 3 tails 8 Socket 21-033479-021 PCB 3 tails 8 Socket 21-033921-105 PCB 3 tails 8 Socket DB-109002 PCB 2 tails 8 Socket 21-033919-015 PCB 2 tails 8 Socket 21-033919-025 PCB 2 tails M39029/90/91 Interface AS39029/114 Type (with hood) AS39029/114 Type (with hood) M39029/90/91 Interface .040 dia. tails M39029/91 Interface Outer body grounded to shell 8 Pin 21-033828-001 PCB 3 tails 8 Pin 21-033828-021 PCB 3 tails 8 Pin 21-033828-041 PCB 3 tails 8 Socket 21-033840-001 PCB 3 tails 8 Socket 21-033840-021 PCB 2 tails Outer body grounded to shell 8 Socket 10 Pin 12 Socket 21-033841-001 PCB 2 tails PCB 2 tails Outer body grounded to shell Outer body grounded to shell 21-033844-002 * Consult Amphenol Aerospace for tail configurations and tail diameters. Consult Amphenol Aerospace for current release of this contact. 46 Comments Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Coax, Twinax & Triax PC Tail Contacts Application Data, cont. Amphenol Aerospace PC TAIL COAX, TWINAX, AND TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS Size PC Tail Coax Contact Part Number PC Tail Twinax Contact Part Number PC Tail Triax Contact Part Number Tails* 12 Pin 21-033686-008 PCB 2 tails 12 Pin 21-033686-009 PCB 2 tails 12 Pin 21-033686-005 PCB 2 tails Comments Outer tail clip type 12 Pin 21-033686-010 PCB 2 tails 12 Pin 21-033686-013 PCB 2 tails Outer tail clip type 12 Pin 21-033687-006 PCB 2 tails For epoxy filled connector PCB 2 tails 12 Pin 21-033687-007 12 Pin 21-033686-016 PCB 2 tails 12 Socket 21-033614-001 PCB 2 tails 12 Socket 21-033614-021 PCB 2 tails 12 Socket 21-033614-041 PCB 2 tails 12 Socket 21-033611-003 PCB 2 tails 12 Socket 21-033440-001 PCB 3 tails 12 Socket 21-033430-001 PCB 2 tails Outer tail clip type, M38999 Series II 12 Socket 21-033430-021 PCB 2 tails M38999 Series II 12 Socket 21-033430-041 M38999 Series II 12 Pin 21-033633-001** PCB 4 tails 12 Pin 21-033633-002** PCB 4 tails 12 Pin 21-033633-006** PCB 4 tails 12 Pin 21-033633-007** PCB 4 tails 12 Socket 21-033393-006** PCB 4 tails 12 Socket 21-033393-005** PCB 4 tails 21-033433-001** PCB 4 tails 12 Socket 16 Pin Outer tail clip type 21-033856-015 JN1104 Interface M38999 Series II, JN1104 Interface PCB 2 tails 16 Pin 21-033856-025 PCB 90 degree, 2 tails 16 Pin 21-033856-065 PCB 2 tails 16 Pin 21-033634-015 PCB 1 tail 16 Pin 21-033634-035 PCB 1 tail 16 Pin 21-033634-045 PCB 1 tail 16 Pin 21-033386-001 PCB 2 tails 16 Socket 21-033857-001 PCB 2 tails 16 Socket 21-033857-008 PCB 2 tails 16 Socket 21-033857-007 PCB 2 tails 16 Socket 21-033610-001 PCB 2 tails PCB 2 tails 16 Socket 21-033610-002 16 Socket 21-033441-001 PCB 2 tails 16 Socket 21-033606-001 PCB 2 tails 16 Socket 21-033606-021 PCB 2 tails PCB 2 tails 16 Socket 21-033606-031 16 Socket 21-033610-003 PCB 2 tails 16 Socket 21-033857-003 PCB 2 tails Outer body grounded to shell Outer body grounded to shell M38999 Series II * Consult Amphenol Aerospace for tail configurations and tail diameters. ** Size 12 twinax and triax contacts are intermatable. Consult Amphenol Aerospace for current release of this contact. Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 47 Amphenol Aerospace Insert Arrangements - MIL-DTL-38999 Incorporating Coax, Twinax and Triax Contacts Front face of pin inserts illustrated A B C A D A C B B D A C B Insert Arrangement 9-5 10-2 11-2 12-3 13-3 12-4 13-4 14-4 15-4 Connector Series TV SJT LJT, TV JT LJT JT, SJT LJT, TV JT LJT Service Rating Grounded I II I I 1 2 3 4 4 8 Twinax 16 16 16 12 Number of Contact Contact Size A A E B D Insert Arrangement Available in Connector Series L A K M B C R N J P H D C 14-5 G 15-5 JT, SJT LJT, TV A G F 14-15 E 15-15 A L B B C M G D F D D C E F 14-68 15-68 14-97 15-97 JT LJT JT, SJT LJT, TV JT, SJT LJT, TV JT, SJT LJT, TV I 17-6 Service Rating II 5 14 1 8 8 4 6 Contact Size 16 20 16 16 20 16 12 K A G B F Insert Arrangement 16-8 17-8 Service Rating Y M L E 16-13 17-13 JT, SJT LJT UC D V W K J A B Z X I 1 A T S N D F D JT, SJT LJT, TV C M N G C E P L H I R B J H Connector Series I 16-6 Number of Contact A H 17 6 E F G B D C 30 11 16-99 17-99 JT, SJT LJT, TV 17-2 17-22 16-6 17-6 LJT TV LJT TV II I Number of Contact 8 13 21 2 38 1 2 2 Contact Size 16 16 20 16 22D 8 12 8 I 2 13 14 12 3 11 22 15 16 23 21 17 20 10 9 8 Service Rating Number of Contact 19 7 4 18 6 S G C L L 19-11 LJT JT, SJT LJT, TV M II Z J K N X E M Y a M E 18-11 b N D D W e H F A d T P C c a L K V g f Z J H D W X Y U C A f V B U e b G Coax S R B V c P F A U d R B K 5 17-25 Insert Arrangement Connector Series Contact Size 24 H M T A J 1 W C E F S G N K R M 18-28 19-28 18-30 19-30 19-31 JT LJT JT LJT TV I B g h I E M 22 2 11 26 2 29 1 2 1 12 22D 8 16 20 16 20 16 8 12 22D The insert arrangements shown on this page and the next page represent the most readily available patterns within the 38999 Circular Series. If you require other arrangements than what are shown here, consult Amphenol for further availability. In most cases, unless otherwise stated, size 8 and size 12 cavities can be filled with either coax, twinax, triax or power contacts. CONTACT LEGEND 8 10 12 Coax/Twinax/ Twinax/Triax/ Coax/Twinax/ Triax or Power or Power Triax or Power 48 E H C E F J B H K 16 20 22D Coax or Power Power Power Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Insert Patterns - MIL-DTL-38999 Incorporating Coax, Twinax and Triax Contacts Front face of pin inserts illustrated A L K C M T J U R G Insert Arrangement 19-68 18-96 LJT JT Service Rating F D N C R H D E JT C L P D G 20-11 21-11 20-16 21-16 JT, SJT LJT, TV I I I II Number of Contact 18 9 11 16 Contact Size 16 12 12 16 T N W V U A X j S i g P M Insert Arrangement Connector Series Y r a q L c d C F B U D V N J L X C V K S F T U J F G H 20-39 21-39 20-75 21-75 20-79 21-79 22-21 23-21 JT, SJT LJT, TV SJT LJT, TV SJT LJT JT, SJT LJT, TV M II II Number of Contact Service Rating 37 I 2 4 17 21 Contact Size 20 16 8 22D 16 A Z 24 23 22 21 44 20 43 52 42 19 41 51 40 39 50 18 38 37 17 36 16 15 14 13 Y 25 1 2 26 3 27 4 45 46 5 28 6 29 53 47 30 49 48 31 7 32 8 33 34 9 10 35 12 11 A M A B N L S K C P D B H G J E G J C K R H L F F EE s V S KK CC q p R P 23-97 23-99 24-4 Connector Series TV LJT LJT JT, SJT Service Rating M II II Contact Size z M f AA G g h k N F e BB n E d y JJ LL D c x HH DD r U T D E FF t W C b GG u X B a w v 23-54 Insert Arrangement Number of Contact D E H G K B R W L E M G H J K P A P C E b n p D A M B R D Z A T S C m f e N B k h R E F E JT, SJT LJT, TV B S J C F F 18-68 Connector Series G J G E A M K B K D P S H L H B H N A J A B m H J K L 25-4 LJT, TV I 40 9 4 16 11 48 8 22D 16 12 16 16 20 16 CONTACT LEGEND 8 10 12 Coax/Twinax/ Twinax/Triax/ Coax/Twinax/ Triax or Power or Power Triax or Power 16 20 22D Coax or Power Power Power Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 49 Amphenol Aerospace Insert Patterns - MIL-DTL-38999 Incorporating Coax, Twinax and Triax Contacts M A B A S A B R L N K P U J C V R T D S H 3 X F 1 U W M V Z a W K H 24-19 JT, SJT Connector Series Service Rating 25-19 24-20 LJT, TV SJT 25-20* F G H 24-24 LJT, TV I E U V J J Insert Arrangement D T L G K C S X F 2 L Y E 6 7 R N D T 5 4 Y N M E G Z P B P C 25-24 JT, SJT LJT, TV N I Number of Contact 19 10 13 3 4 12 12 Contact Size 12 20 16 8 12 16 12 (Locations U and Y - Dedicated to Fiber Optics) U A R S B T T N f a d M e Z L Y X J H N F n K M m 25-29 24-37 25-37 JT, SJT LJT, TV r t s S g R P f N M 24-43 L 25-43 23 20 Contact Size 16 16 20 16 T Y v AA r Z a q z m N Connector Series w y k M Insert Arrangement H D J C b E n P B C S p R I A B X u s x g h f K L 24-46 SJT Service Rating d e J K JT, SJT LJT, TV I A G H e 37 U F c G G H L K D F E J 25-46 25-11* LJT, TV LJT, TV I N Number of Contact 40 4 2 2 9 Contact Size 20 16 8 20 10 CONTACT LEGEND * For use in MIL-STD-1760 applications with MIL-DTL-38999 Series III. 8 10 12 Coax/Twinax/ Twinax/Triax/ Coax/Twinax/ Triax or Power or Power Triax or Power 50 x I W F d u 29 t E c Number of Contact V D b h J LJT, TV C a q w k T H L p v F G 24-29 Service Rating U B Z n Y a b V E Z JT, SJT Insert Arrangement Connector Series m p c G K X r P W D k d E W W A Y X C h R D V B V q e U c g f S C P b A 16 20 22D Coax or Power Power Power Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com MIL-DTL-5015, MIL-DTL-22992 Circular Connector Overview Amphenol Aerospace Amphenol's medium to heavy weight circular include the MS/Standard MIL-DTL-5015 series and the heaviest weight, largest size circular is the Heavy Duty MIL-DTL-22992 series. These time-tested circulars have been used for several years. They are dependable general duty and environmentally resistant connectors for military and industrial applications. Shielded coax contacts, although more popularly used in 38999 types and 26482 types, can be incorporated into some arrangements of the 5015 and 22992 type circulars. Shielded coaxial contacts within these series are considered MS modifications to the MIL-spec connector and the coax contacts are pre-installed in the connector. Normal operating voltage with power contacts only is up to 3000 VAC (RMS) at sea level for MIL-DTL-5015 circulars. The Heavy Duty types are designed for high current capacity and have current ratings (with power contacts only) of up to 200 amps. Standard and Heavy Duty Circular offer these features for contact termination flexibility: * Insert arrangements that can incorporate: * Size 4, 8 & 12 Crimp Coax contacts, pre-installed in the connector * Wide selection of connector shell styles and sizes * Standard power contact options within the various connector styles include: solder type, crimp front release, crimp rear release * Coax contacts are designed to the same high performance standards as power contacts. Coax and power contacts may be intermixed with no degradation of connector reliability. MS/Standard MIL-DTL-5015 Type Connectors Amphenol(R) MS/Standard Circular MIL-DTL-5015* Type Connector Family: See MS/Standard catalog 12-020 for complete information on these styles Heavy Duty QWLD, MIL-DTL-22992 Connectors MS-A, MS-C, MS-E, MS-F, MS-R * Produced in strict accordance with MIL-DTL-5015 * Threaded coupling, solder or crimp rear insertion contacts (coax available in crimp type only) * Class A, Solid Shell - intended for general connector usage * Class C, Pressurized - for use on pressurized bulkheads or pressure barriers * Class E/F, Environmental Resisting - ideally suited for installation where condensation, vibration and rapid changes in pressure or temperature are considerations * Class R, Lightweight Environmental Resisting - shorter in length and lighter in weight than Class E Amphenol(R) Heavy Duty Circular MIL-DTL-22992 Connector Family: QWLD * Designed for most power and control circuits * Military MIL-DTL-22992 qualified versions and proprietary equivalents See Catalog 12-052 for complete information on these styles. QWL * A more compact heavy duty design for industrial power and control applications See Catalog 12-053 for complete information on these styles. GENERAL ORDERING INFORMATION Amphenol MS/Standard MIL-DTL-5015 type and Heavy Duty MIL-DTL-22992 type circulars are normally supplied with a full complement of power contacts, separately packaged. Coax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. Coax contacts are pre-installed in these series. Installation instructions for the coax contacts for these series are provided in Amphenol document L-650. HOW TO ORDER: 1. Select the coax contacts designed for the cable being used from the chart on page 409 of this catalog. Select a connector insert from those shown on page 44 which will accommodate the quantity and size of coaxial contacts needed plus any power contacts required. 2. Determine the MS/Standard or Heavy Duty Series style desired. (See features of each series referenced above). The catalog referenced for each series will guide you in determining shell style, finish, service class and insert rotation required for your application. MS/Standard MIL-DTL-5015 Type Connectors (Catalog 12-020 on-line at www.amphenol-industrial.com) Catalog 12-052 - MIL-DTL-22992 QWLD Connectors (on-line at www.amphenol-aerospace.com) Catalog 12-053 - QWL Connectors (currently not on-line; consult Amphenol Aerospace for hardcopy) 3. Consult Amphenol, Sidney, NY with the pertinent cable, contact, insert arrangement and connector style choices for complete connector part number. * Amphenol also offers the following other MIL-DTL-5015 Circular Connectors which are threaded coupling (consult Amphenol Industrial for availability of shielded contacts in any of these series): * Amphenol(R)/Matrix(R) MIL-DTL-5015 with crimp rear releasable and rear insertable contacts. (See Matrix 5015 section of this catalog) * Amphenol(R) MIL-DTL-5015 Modifications (Ask for Industrial Catalog 12-021) * Amphenol(R) GT Series with reverse bayonet coupling (Ask for Catalog 12-024) NOTE: * Amphenol(R) AC Threaded and AC-B Bayonet Series MIL-DTL-5015 supersedes MIL-C-5015 (Ask for Industrial Catalog 12-025) MIL-DTL-22992 supersedes MIL-C-22992 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 51 Amphenol Aerospace Coaxial Contacts for MIL-DTL-5015, Heavy Duty MIL-DTL-22992 General Description Amphenol(R) Coaxial Contacts- can be incorporated into MS/Standard MIL-DTL-5015 Type Circular Connectors and Heavy Duty MIL-DTL-22992 Connec tors. They offer the same durability advantages and design benefits for reliable interconnection as the Amphenol coax contacts used in high performance D38999 connectors. A variety of military and commercial shielded cables are accommodated within these circular series. Other features of the coax contacts available for MS/Standard and Heavy Duty circulars include: * Several insert arrangements that can incorporate: * Size 4, 8 and 12 coax contacts * Advanced shielding wire technology in a rugged military connector * Single connector with multiple coaxial connection eliminates cross-mating * Positive contact captivation - especially important in these series with its much higher coupling/uncoupling force * Older shielded cable type availability TYPICAL ELECTRICAL PERFORMANCE Coax Contact, Pin for use in MS/Standard MIL-DTL-5015 and Heavy Duty MIL-DTL-22992 Connectors Size 4, 8 & 12 Contacts Contact Resistance: Center @ 1 Amp, 170 millivolts max. voltage drop @ 25C Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25C Dielectric Withstanding Voltage: Size 4 & 8: 1,300 VAC Rms @ sea level Size 12: 1,000 VAC Rms @ sea level Size 4, 8 & 12: 250 VAC Rms @ 50,000 ft. Insulation Resistance 5,000 megohms minimum @ 25C All contacts in these series are non-impedance matched contacts. Part numbers 21-033063-XX( ) and 21-033064-XX( ) are moisture seal design (internal O-ring). CONTACT FINISHES: Coax Contact, Socket for use in MS/Standard MIL-DTL-5015 and Heavy Duty MIL-DTL-22992 Connectors 52 Suffix Finish 1 0.00020 min. silver over copper flash 2 0.00005 min. gold (Knoop hardness 130-200) over silver 3 0.00010 min. gold (Knoop hardness 130-200) over silver 4 0.00010 min. gold (Knoop hardness 130-200) over copper 5 0.00005 min. gold (Knoop hardness 130-200) over nickel E 0.00005 min. gold (Knoop hardness 90 max.) over copper F 0.00005 min. gold (Knoop hardness 130-200) over copper H 0.00010 min. gold (Knoop hardness 130-200) over copper Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Amphenol Aerospace Coaxial Contacts for MIL-DTL-5015, Heavy Duty MIL-DTL-22992 Application Data L F H MATING PIN DIA G SOCKET L H F G MATING PIN PIN DIA NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each other. COAX CONTACTS For use in MS/Standard MIL-DTL-5015 Type and Heavy Duty MIL-DTL-22992 Type Connectors Contact Part Number Cable (See L-650 Termination Instruction Sheet for all contacts listed below)** Finish on Mating Size Parts (See Pg. 42) Dimensional Data (See Drawings above) G Dia. H F Dia. Across Flats 0.001 0.004 Crimp Ferrule Tools L Length Ref. Retainer Nut MIL-T-22910/7-1 MIL-T-22520/5-01 MIL-T-229520/10-01 Wrench Socket Tool Use with Tool Use with Die Tool Use with Die Die Part Number Part Number Part Number Pin Socket 21-033014-001 21-033034-002 21-033048-002 21-033016-005 21-033130-002( ) 21-033013-001 21-033033-002 21-033047-002 21-033015-005 21-033129-002( ) 8 8 8 8 8 5 1 3 *** 0.0355 0.218 0.0010 0.280 1.481 1.511 21-033014-005 21-033016-002 21-033034-005 21-033130-005( ) 21-033064-021( ) 21-033013-005 21-033015-002 21-033033-005 21-033129-005( ) 21-033063-021( ) 8 8 8 8 8 5 3 1 *** *** 0.0355 0.218 0.0010 0.280 1.481 1.511 21-033060-010( ) 21-033059-010( ) 4 *** 0.0400 0.344 0.0010 0.375 21-033013-003 21-033014-003 21-033015-001 21-033016-001 21-033033-003 21-033034-003 RG-161/U, RG-174A/U, 21-033130-003( ) 21-033129-003( ) RG-179B/U, 21-033064-020( ) 21-033063-020( ) 8 8 8 8 8 5 3 1 *** *** 0.0355 0.218 0.0010 0.280 21-033013-021 21-033014-021 21-033033-001 21-033034-001 21-033047-001 21-033048-001 21-033130-001( ) 21-033129-001( ) 12 12 12 12 5 1 *** *** 0.0200 0.128 0.0005 0.172 21-033013-022 12 5 0.0200 0.128 0.0005 0.172 1.481 1.511 M22910/7-11 (B) M22520/5-03 (B) M22520/5-33 (B) M22520/10-05 (B) 11-8676-1 21-033013-006 21-033014-006 21-033034-006 21-033033-006 21-033047-003 21-033048-003 21-033130-006( ) 21-033129-006( ) 8 8 8 8 5 1 *** *** 0.355 0.218 0.0010 0.280 1.481 1.511 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 RG-212/U 21-033060-011( ) 4 *** 0.0625 0.344 0.0010 0.375 1.669 1.605 M22910/7-14 (A) M22520/5-39 (A) RG-140/U, RG-302/U 21-033013-008 21-033014-008 21-033033-008 21-033034-008 21-033130-008( ) 21-033129-008( ) 8 8 8 5 1 *** 0.0355 0.218 0.0010 0.280 1.481 1.511 M22910/7-17 (B) M22520/5-05 (A) M22520/5-19 (B) M22520/10-07 (A) 21-033013-004 21-033033-004 21-033129-004( ) 8 8 8 5 1 *** 0.0355 0.218 0.0010 0.280 1.481 1.511 M22910/7-17 (B) M22520/10-07 (A) 21-033059-012( ) 4 *** 0.0625 0.344 0.0010 M22520/5-05 (A) M22520/5-19 (B) 0.375 RG-58C/U, RG-141A/U, RG-303/U RG-59B/U, RG-62A/U, RG-62B/U, RG-210/U RG-187A/U, RG-188A/U, RG-316/U RG-178B/U, RG-196A/U RG-180B/U, RG-195A/U 21-033014-022 21-033014-004 RG-55B/U, 21-033034-004 RG-142A/U, 21-033130-004( ) RG-142B/U, RG-223/U 21-033060-102( ) 21-033059-011( ) Pin 1.669 M22910/7-15 (B) M22520/5-05 (B) M22520/5-41 (B) M22910/7-18 (B) M22520/5-45 (B) M22520/10-07 (B) 11-8676-2 11-8676-3 1.605 11-8676-4 11-8676-2 1.481 1.511 M22910/7-12 (B) M22520/5-03 (A) M22520/5-08 (A) M22520/5-35 (B) M22520/10-05 (A) 11-8676-1 1.669 ***See finish options for MS/Standard and Heavy Duty contacts listed on page 416. Replace the parenthesis of the contact part number with the finish suffix number. However, you should consult Amphenol Aerospace regarding the availability of all finish choices for each part number. 1.605 11-8676-4 11-8676-2 11-8676-2 11-8676-4 Consult Amphenol Aerospace for current availability of this contact. CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. Commercial equivalents with the same die closure dimension may be used. 21-033047-X and 21-033048-X are supplied with E (soft gold) finish on mating socket parts, and F (hard gold) finish on mating pin parts.**Termination instruction sheet L-650 can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 53 Amphenol Aerospace Insert Patterns - Standard MIL-DTL-5015, Heavy Duty MIL-DTL-22992 Incorporating Coax Contacts Front face of pin inserts illustrated C A B A C B D A C B 16-10 18-10 18-16 20-4 MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL A A C D Insert Arrangement Connector Series D Service Rating Number of Contact 3 4 1 4 Contact Size 12 12 12 12 F F E E A G B D D C G F I H C G E D B C E F A D B Insert Arrangement B A A C G I H 20-15 20-16 24-2 24-11 MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL Service Rating A A D Number of Contact 7 2 7 7 3 6 Contact Size 12 12 16 12 8 12 Connector Series A M T H J A U N E P F K V R S B M W e D T J P a H K S X C G L 28-6 28-11 32-8 MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL MS/Standard, QWLD, QWL Service Rating D A A Number of Contact 3 4 18 6 24 Contact Size 4 12 16 12 16 Insert Arrangement Connector Series The insert arrangements shown on this page represent the most readily available patterns within the MIL-DTL-5015 and MIL-DTL-22992 Series. If you require other arrangements than what are shown here, consult Amphenol for further availability. MS/Standard connectors have over 200 insert pattern arrangements available, and within these patterns any size 4, 8 or 12 contact cavities can be incorporated with coax contacts. However, you need to consult Amphenol, Sidney NY for availability and ordering information. All coax contacts in the Standard and Heavy Duty series come pre-installed in connectors. 54 B F R b I A E O V d C X I Z G L D N U c A B W C Y CONTACT LEGEND 4 Coax or Power 8 12 Coax/ Coax/Twinax/ Twinax/Triax Triax or or Power Power Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 16 Coax or Power Rectangular Rack & Panel Connectors That Incorporate High Speed Contacts Amphenol Aerospace Amphenol provides an impressive array of Rectangular Interconnection products to meet the needs of high density systems such as opto-electrical backplanes used in many applications that include: medical equipment, IC chip testers, telecommunications, military and commercial aviation, military ground vehicles, GPS systems, space and industrial applications. * ARINC 600 and R27 Rack and Panel connectors can incorporate: * size 8 Coax contacts * Size 1 and size 5 Coax (consult Amphenol Canada) * Size 12 Twinax contacts * Size 8 Quadrax contacts * Size 8 Differential Twinax contacts ARINC 600 Rack and Panel Rectangular Connectors See Amphenol Canada Publication SL-379, ARINC 600 Rack and Panel Connectors for complete information. * The ARINC 600 is the successor to the ARINC 404 for many of the new avionics designs and offers lower mating force contacts, increased contact count and a front release, floating keying system * ARINC 600 Connectors are a recognized standard rack and panel connector for aircraft applications with both environmental and non-environmental versions available * Designed to meet all relevant ARINC 600 connector specifications * Front removable keying posts * Up to 800 size 22 contact positions in one connector * Contact options: standard contacts are power/signal crimp rear release in sizes 12, 16, 20 and 22 in crimp or PCB; or shielded coax, concentric twinax, quadrax contacts; or fiber optics * Waveguide connections ARINC 600 Rack and Panel Connectors are high density connectors that can incorporate high speed shielded contacts R27 Rack and Panel Rectangular Connectors See Amphenol Canada Publication for R27 Series Connectors for complete information. * The R27 Series is a robust rectangular connector designed to meet or surpass all the requirements of the MIL-DTL-83527 specification and EN 3682 European Standard. * Well suited for harsh environments - enhanced environmental sealing, robust and durable shells, EMI shielding spring * Filtered or non-filtered * Connectors, shells, inserts, termination modules and contacts are sold separately or fully assembled * Interchangeable insert patterns with ARINC 600 models * Contact options: standard contacts are power/signal crimp rear release in sizes 12, 16, 20 and 22 in crimp or PCB; or shielded coax, concentric twinax, quadrax contacts; or fiber optics Coax Contact , Size 8 for use in ARINC Rack and Panel Connectors R27 Series Rack and Panel Connector can incorporate high speed shielded contacts Quadrax Contact , Size 8 for use in ARINC Rack and Panel Connectors Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 55 Amphenol Aerospace High Speed Contacts for Rack & Panel Application Data ARINC 600 & R27 Rack and Panel Connectors QUADRAX CONTACTS FOR USE IN ARINC 600 & R27 CONNECTORS Contact Part Number (Termination Instruction Sheet)** Cable Tensolite NF24Q100-01, 24443/9P025X-4(LD), S280W502-4, 24443/03130X-4(LD) Pin Socket 21-033382-021 21-033383-021 100 21-033382-031 21-033383-031 100 21-033382-101 21-033383-101 100 21-033382-071 21-033383-071 110 21-033382-061 21-033383-061 150 (L-2119-AH) Draka Fileca F-4703-3 (L-2119-I) Draka Fileca F-4704-5, NF22Q100 (L-2119-AS) JSFY02-1 Tensolite 26473/02006X-4(LD), Gore RCN8328 (L-2119-L) Crimping Tools Impedance Contact (Ohms) Size (L-2119-AH) (L-2119-I) (L-2119-AS) (L-2119-L) Inner Contact Outer Contact M22520/2-01 with Positioner Daniels K709 (M22520/2-37) M22520/5-01 with Die Set M22520/5-45 (Location B) M22520/2-01 with Positioner Daniels K709 (M22520/2-37) M22520/5-01 with Die Set M22520/5-45 (Location A) 8 DIFFERENTIAL TWINAX CONTACTS FOR USE IN ARINC 600 & R27 CONNECTORS Contact Part Number (Termination Instruction Sheet)** Cable Impedance Contact (Ohms) Size Pin Socket ABS0386WF24 21-033378-021 21-033379-021 100 ASNE0272TK22 21-033378-031 21-033379-031 100 ASNE0272TK24 21-033378-041 21-033379-041 100 Tensolite 24463/9P025X-2(LD) 21-033378-051 21-033379-051 100 GC875TM24H 21-033378-061 21-033379-061 77 21-033378-071 21-033379-071 110 (L-2119-G) (L-2119-G) (L-2119-G) (L-2119-AU) (L-2119-G) (L-2119-G) (L-2119-G) (L-2119-AU) 8 COAX CONTACTS FOR USE IN ARINC 600 & R27 CONNECTORS Contact Part Number Cable (Termination Instruction Sheet)** Pin RG-179 RG-179 5M2869-001 Socket Contact Size 21-033676-001 21-033675-001 (L-2090-B) (L-2090-A) 21-033476-001 21-033475-001 Crimping Tools Inner Outer Contact Contact M22520/10-01 M22520/2-01 with Die Set with Positioner M22520/10-05 (A) K1275 Outer Contact M22520/2-01 with Positioner Daniels K709 (M22520/2-37) M22520/5-01 with Die Set M22520/5-45 (Location A & B) PCB QUADRAX CONTACTS FOR USE IN ARINC 600 & R27 CONNECTORS PCB Quadrax Contacts Contact Part Number Pin PCB (.346 Length) PCB (.473 Length) Socket Impedance Contact (Ohms) Size 21-033397-171 100 8 21-033398-261 21-033676-002 21-033675-002 Contact Part Number (Termination Instruction Sheet)** Pin Socket EPD 32263, 21-033631-004 21-033632-003 10612, (L-2092-U) (L-2092-J) GSC-12-2548-00 56 Inner Contact 8 TWINAX CONTACTS FOR USE IN ARINC 600 & R27 CONNECTORS Cable Crimping Tools Contact Size 12 Crimping Tools Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicable. Daniels crimping tools are available from Daniels Mfg. Corp. 6103 Anno Ave., Orlando, FL 32809 **Termination instructions are packaged with each contact and can be found on-line at: www.amphenol-aerospace.com/serviceinstructions.asp Inner Outer Contact Contact GS200-1 MH992 with Positioner with Positioner GP959 K1365 Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Additional Contact Styles from Amphenol Amphenol Aerospace Amphenol has today's broadest range of interconnection solutions for military, commercial and industrial applications. As a worldwide interconnection product leader, Amphenol can meet not only connector needs, but also contact needs of all types. In addition to the shielded and high frequency contacts shown in this publication, Amphenol offers many other contact styles: PRINTED CIRCUIT BOARD SIGNAL AND POWER CONTACTS See the Printed Circuit Board section of this catalog. THERMOCOUPLE CONTACTS Available for MIL-DTL-5015, MIL-DTL-22992, MIL-DTL-26482, MIL-DTL-26500, MIL-DTL-38999, MIL-DTL-83723 and other series connectors. Thermocouples are designed for temperature measuring applications, and are available in both pin and socket configurations in alumel, chromel, iron and constantan materials. Please refer to the mil series sections in this catalog. PC Tails Signal and Power Contacts and Custom PC Tail Designs. Compliant Pin (Press Fit) Contacts for Solderless Mounting to PC Boards FLEX TERMINATION ASSEMBLIES FOR PCB APPLICATION Flex circuits are available for MIL-DTL-38999, MIL-DTL-5015 and MIL-DTL-26482, as well as for special products such as EMI/EMP filter connectors and rectangular LRM connectors. Please contact an Amphenol Sales Person for more information or visit www.amphenol-aerospace.com/support to find a sales person in your area. FIBER OPTIC TERMINI See the Fiber Optic section of this catalog FILTER PI TYPE TUBULAR AND PLANAR ARRAY CONTACT ASSEMBLIES See the Printed Circuit Board section of this catalog. Sculptured Flex Circuits RADSOK(R) HIGH POWER CONTACTS Amphenol's RADSOK(R) contact design is a hyperbolic, stamped grid configuration within the socket cylinder. As the male pin is inserted, axial members in the female socket half deflect, imparting high current flow across the connection with minimal voltage loss. Another advantage of the RADSOK(R) contact is low insertion force. The RADSOK(R) contact has been incorporated into three of the large industrial families of connectors; the GT series, the P-Lok series and 5015 types. These connectors, known as Amphe-Power(R) connectors, can handle up to 150% higher amperages. Amphenol Industrial Operations division also provides a wide range of power to board interconnects utilizing the RADSOK(R) technology. These provide high amperage connection to busbars, wires and circuit boards. RADSOK(R) contacts are being further introduced into military/aerospace products. High power RADSOK(R) is now developed into applications for engine connectors for Commercial Air, and are also being designed into LRM interconnects for high speed data transfer. See Amphenol Industrial Brochure, SL-391. (visit www. amphenol-industrial.com) See more information on RADSOK(R) in options, other products section of this catalog pages. RADSOK(R) High Power Contacts and Connectors Rectangular Connectors Amphenol provides an impressive array of Rectangular Interconnection products to meet the needs of high density systems such as opto-electrical backplanes used in many applications that include: medical equipment, IC chip testers, tele communications, military and commercial aviation, military ground vehicles, GPS systems, space and industrial applications. Available in Low Mating Force with Brush contacts, Power Strip, LRM, ARINC 600 Rack and Panel, and R27 Rack and Panel Rectangular Connectors. For more information please contact an Amphenol Sales Person on visit www. amphenol-aerospace.com/support for a sales person in your area. LRM Connectors with Inserts of Staggered Brush Contacts and Inserts of Coax Contacts Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com 57 Amphenol Aerospace Guide for Selecting High Frequency Contacts and Cables Date__________________________________________ Amphenol Salesperson____________________________________ The following check list is provided to help you specify a high frequency contact and cable system, and it will help our design team to meet your requirements. You may copy this page and fax it to Amphenol Aerospace 607-563-5157, attention Contact Design. Or call 607-563-5011 or 800-678-0141 for assistance. CONNECTOR INFORMATION Connector Family: TV-R c LJT-R c JT-R c CUSTOMER INFORMATION Other ________________________________________ Customer Company Name_____________________________________ Insert Arrangement Desired________________________ Engineer Name______________________________________________ Shell Style_____________________________________ Program____________________________________________________ Shell Plating____________________________________ Forecast____________________________________________________ CONTACT INFORMATION CABLE INFORMATION Type: Cable Part Number*______________________________________ Coaxial c Concentric Twinax c Differential Twinax* c Triax c Quadrax* c Cable Manufacturer ______________________________________ Cable Type: Coaxial c Triax c 12 c Size*: 8 c Twinax c Contact Impedance Matched? Quadrax c Cable Impedance________________________________ * if not an RG-Number complete below information: 50W c 75W c 100W c 16 c Yes c 150W c No c Other_______ * Quadrax and Differential Twinax currently available in size 8 only. O.D. of Inner Wire______________________ AWG of Inner Wires__________________ No. of Inner Wire Strands________________ Material of Inner Wires ________________ O.D. of Inner Insulation__________________ Material of Inner Insulation _____________ O.D. of First Braid______________________ Braid Type__________________________ (flat, round, wrap) O.D. of First Jacket_____________________ Jacket Material______________________ O.D. of Second Braid___________________ Braid Type__________________________ (flat, round, wrap) O.D. of Second Jacket__________________ Jacket Material______________________ Braid AWG ___________________ Braid AWG___________________ It is essential that a 3 foot sample of the cable be supplied for performance and crimp tool development. PERFORMANCE INFORMATION Electrical Protocol _______________________________________________________________________________________ VSWR Requirement 1. to 1.______________ Cross Talk________________________db Operating Frequency___________________ Attenuation_________________________ Operating Voltage ____________________ VAC (RMS) Current Outer Contact______________ AmpCurrent Inner Contacts_ Application Temperature________________ 58 Insertion Loss_________________ _________________DC Current Inner Contacts ____________ Amp Environmental Requirement__________________________________________ Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com