Sealed Tilt Switch D7E 51
Sealed Tilt Switch
D7E
• Pure mechanical tilt detector
• Sealed enclosure
• Output capacity from 0.1 mA at 5 VDC to 100 mA at 30 VDC
• RoHS Compliant
Ordering Information
Characteristics
Operating Angle Model
50 to 80 degrees D7E-3
Operating angle Tilt of 50 to 80 degrees, when the switch is tilted gradually (approx. 1 degree/s) from the horizontal
Returning angle Tilt of more than 25 degrees, when the switch is tilted gradually (approx. 1 degree/s) from the horizontal
Permissible mounting level 1 degree max. from the horizontal
Contact form Single pole single throw (NC contact / slow action)
Mounting Pitch: 30 mm 2 screws (M3)
Height: 5.3 mm
Soldering Soldering iron: temperature 350 ±10°, 3 sec. max
Ratings 5 VDC, 0.1 mA to 30 VDC, 100 mA (resistive load)
Insulation resistance 100 MΩ min. (250 VDC, between each terminal of the same polarity)
To measure off condition
Contact resistance 300 m Ohm max. (Initial value)
Vibration during
transportation
Condition: Vibration: 200 gal (1 cycle: 0.5 sec.)
Vibration direction: 2 axial directions
Time: Total 50 hours
Shock Condition: Acceleration: 980 m/s2 3 times
Shock direction: 3 axial directions
Operating temperature and
humidity
Temperature: -25° to +60° (with no icing and condensation)
Humidity: 45 to 95% RH
Storage temperature and
humidity
Temperature: -25° to +60° (with no icing and condensation)
Humidity: 45 to 95% RH protection
Protection IP67
52 Sealed Tilt Switch D7E
Dimensions
Unit: mm
Sealed Tilt Switch D7E
MEMO
Sealed Tilt Switch D7E
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X305-E-1 Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
10/10 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
