QSFP+ CONNECTORS AND CAGES Quick Reference Guide DATA COMMUNICATIONS /// QSFP+ SOLUTIONS QSFP+ Solutions Introducing QSFP+ Family QSFP (or quad SFP) connectors provide four channels of data in one pluggable interface. Each channel is capable of transferring data up to 14 Gbps, supporting a total of 56 Gbps. These interconnects have 3x the density of SFP+ interconnects. The QSFP product family includes cages in single and ganged configurations with various heat sink and lightpipe options. The connector is a 38-position, high-speed SMT connector. EMI plugs are offered for empty ports. TE Connectivity offers PARALIGHT active optical QSFP+ cable assemblies, which eliminate the need for a separate transceiver and optical interface. The QSFP+ direct attach copper cable assemblies are a high-speed and cost-effective alternative to fiber optics in short-reach 10Gb Ethernet and 14Gb InfiniBand FDR applications. These assemblies enable hardware OEMs and data center operators to achieve higher port density and configurability at a low cost while reducing the power requirement. Features and Benefits Interconnect * 4-channels in one interface, providing 3 to 4x density of, SFP+ and XFP * Meets QSFP+ 10 Gbps Ethernet and 14 Gbps InfiniBand requirements (total 40- and 56-Gbps interface) * Uses 38-position SMT connector * Cages offered in single port and ganged configurations * 2x1 and 2x2 stacked assemblies also available * Cages accommodate belly-to-belly mounting * Heat sinks and lightpipes available Cable Assemblies * Direct attach copper and PARALIGHT optical cable assemblies offered * MSA compliant * Supports data rates up to 10 and 14 Gbps per channel (40 Gbps aggregate) * Low power consumption * Enhanced EMI suppression * Pull-to-release slide latch design * Passive and active assemblies DATA COMMUNICATIONS /// QSFP+ SOLUTIONS PAGE 2 QSFP+ Solutions Applications Applications by Protocol Product Applications * Storage * 10 Gigabit and 40G Ethernet * Servers * InfiniBand: * Networking * SDR (2.5 Gbps) * Switches, routers and hubs * DDR (5 Gbps) * Network Interface Cards (NICs) * QDR (10 Gbps) * Telecommunication equipment * FDR (14 Gbps) * Serial attached SCSI (SAS) 38 Position SMT Connector Part Number Description 1761987-9 Standard QSFP Connector 2110819-1 Enhanced QSFP+ Connector Behind Bezel Gaskets Part Number Description 2132186-1 1x1 2132187-1 1x3 2132188-1 1x4 Lightpipes Part Number 1888634-1 Description Single Round LP for thru bezel cages 2170022-1 Single Square LP for behind bezel cages 2007309-1 Dual Round lightpipe for Thru Bezel Cages 2007477-X Dual Round lightpipe for Behind Bezel Cages 2057121-1 Dual Square lightpipe for Behind Bezel Cages DATA COMMUNICATIONS /// QSFP+ SOLUTIONS PAGE 3 QSFP+ Solutions Cages Lightpipes Applied Base Number Ports Cage Applications EMI Supresson Per Port Heatsinks Applied Single Dual Quad Networking PCI SAN 1888781 1x1 Behind Bezel C No No No No No No 1888968 1x1 Behind Bezel C No No No Yes Yes Yes 2170112 1x1 Behind Bezel C No Yes No Yes Yes Yes 2170539 1x1 Through Bezel EMI Gasket No No Yes Yes Yes Yes 1888617 1x1 Through Bezel EMI Springs No No No No No No 2110487 1x1 Through Bezel EMI Springs No No No Closed Top 1888674 1x1 Through Bezel EMI Springs C C C No No No 1888631 1x1 Through Bezel EMI Springs No No No Yes Yes Yes 1888971 1x1 Through Bezel EMI Springs No Yes No Yes Yes Yes 1888972 1x1 Through Bezel EMI Springs Yes No No Yes Yes Yes *2170519 1x1 Through Bezel EMI Springs No No No No No No *2170536 1x1 Through Bezel EMI Springs No No No Yes Yes Yes **2170322 1x1 Through Bezel EMI Springs No No No Closed Top 2007456 1x3 Behind Bezel C No No No Yes 2007473 1x3 Behind Bezel C C C C No No No 2057042 1x3 Behind Bezel C No Yes No Yes Yes Yes 2110412 1x3 Behind Bezel C No Yes No Yes Yes Yes 2170037 1x3 Behind Bezel C Yes No No Yes Yes Yes 2174769 1x3 Behind Bezel EMI Gasket No No No Yes Yes Yes 2170507 1x3 Through Bezel EMI Gasket No No Yes Yes Yes Yes 2007667 1x4 Behind Bezel C No No No No No No 2007668 1x4 Behind Bezel C C C C No No No 2007625 1x4 Behind Bezel C No No No Yes Yes Yes 2007626 1x4 Behind Bezel C No Yes No Yes Yes Yes 2170567 1x4 Behind Bezel C No Yes No Yes Yes Yes 2174754 1x4 Behind Bezel EMI Gasket No No No Yes Yes Yes 2170288 1x4 Through Bezel EMI Gasket No No No No No No 2170287 1x4 Through Bezel EMI Gasket No No No Yes Yes Yes 2170525 1x4 Through Bezel EMI Springs No No No No No No Closed Top Closed Top Closed Top Closed Top Yes C stands for Customer Applied Gasket *Rear tails removed 1xN cages: require a SMT connector to complete the assembly **Enhanced EMI Protection + solder tail Yes 2xN cages: connectors and cages come as one integrated assembly Heatsink Max Height off of PCB: Networking (23mm), SAN (16mm), PCI (13.7mm) All cages use EMI Plug 1888810-2 DATA COMMUNICATIONS /// QSFP+ SOLUTIONS PAGE 4 QSFP+ Solutions Cages Lightpipes Applied Per Base Number Ports Cage Applications EMI Supresson Port Heatsinks Applied Single Dual Quad Networking PCI SAN 2170024 1x4 Through Bezel EMI Springs No No No Closed Top Closed Top Closed Top 2170377 1x4 Through Bezel EMI Springs No No No No Yes Yes 2170378 1x14 Through Bezel EMI Springs No Yes No Yes No No 2143329 1x6 Behind Bezel C No No No No No No 2143330 1x6 Behind Bezel C No No No Yes Yes Yes 2143307 1x6 Behind Bezel C No Yes No Yes Yes Yes 2143331 1x6 Behind Bezel C No Square No Yes Yes Yes 2170023 1x6 Behind Bezel C Yes No No Yes Yes Yes 2170207 1x6 Through Bezel EMI Gasket No No No Yes Yes Yes 2085945 2x1 Through Bezel EMI Gasket Yes Yes No No No No 2214574 2x2 Through Bezel EMI Gasket Yes Yes No No No No C stands for Customer Applied Gasket *Rear tails removed 1xN cages: require a SMT connector to complete the assembly **Enhanced EMI Protection + solder tail 2xN cages: connectors and cages come as one integrated assembly Heatsink Max Height off of PCB: Networking (23mm), SAN (16mm), PCI (13.7mm) All cages use EMI Plug 1888810-2 DATA COMMUNICATIONS /// QSFP+ SOLUTIONS PAGE 5 QSFP28 Pluggable Featuring Passive Copper Cable Assemblies Related Cable Assemblies Direct Attach Copper Cable Assemblies Dash to Length (meters) P/N Description AWG 0.5 1 2 3 4 5 2074739 DDR (5Gbps) Passive 26~30 -1 -2 -3 -4 -5 -6 2015234 QDR (10Gbps) Passive 26~30 -9 -1 -2 -3 -4 -5 2053638 QDR (10Gbps) Unequalized Passive 26~30 -16 -1 -2 -3 -4 -5 DDR QSFP to Hybrid Cable 26~30 -1 -2 -3 -4 -5 -7 2074119 Cable Assembly Features and Benefits * Pull tab unlatching allows compact belly-to-belly application * 360 degree cable braid crimp supresses EMI * Uses MADISON CABLE brand TurboTwin copper cable * Hybrid and breakout cables available : ie, QSFP to 4xIB, QSFP to SFP+ QSFP/QSFP+ PARALIGHT Active Optical Cable Assemblies Base Part Number Meters (x represents base number shown on the left) Cable Description Type 3 5 7 10 15 20 30 40 50 100 2123603 InfiniBand FDR 56 Gb/s OFNP* x-2 2123909 Ethernet 40 GBASE-SR4 OFNP* x-2 x-3 1- x -3 x-4 x-5 x-6 x-8 x-8 1- x -0 1- x -1 x-3 1 - x -3 x-4 x-5 x-6 x-8 x-9 1- x -0 1- x -1 X represents base number. For specific part numbers add an extension number (-2 or -6) to the base number. For example, for 3 meter InfiniBand FDR 56 Gb/s cable, part number is 2123603-2. For 50 meter Ethernet 40 GBASE-SR4 the number is 1-2123909-0. *OFNP = Optical Fiber Nonconductive Plenum (Also known as CX4 and SFF-8470) Note : Longer lengths available upon request. 25mm bend radius Passive Fiber Cable Assemblies Cable P/N Description 2148448 1938323 Type OM4 MPO (no pins) QSFP 1938208 DATA COMMUNICATIONS /// QSFP+ SOLUTIONS OM3 OM2 PAGE 6 Frequently asked Questions What data rate does QSFP+ support? QSFP+ supports up to 10 Gbps per channel Ethernet (40G total) and 14 Gbps per channel InfiniBand (56 Gbps total). Is TE's footprint compatible with other suppliers? The single port cages are designed to industry standards. The ganged versions are not compatible with all sources. Are heat sinks available? Yes, TE offers a generous portfolio of heatsink heights and styles, as well as custom heatsinks upon request. Is application tooling required? Single port cage assemblies require only flat-rock tooling, while ganged assemblies require specific application tooling. Does the application follow the performance requirements of SFF-8436? TE's QSFP+ copper passive and active cable assemblies meet signal integrity requirements defined by industry standard SFF-8436. A fundamental requirement is the data rate as these cables are engineered for DDR and/or QDR data rates. We can also custom engineer cable assemblies to meet a specific system requirements. Are passive or active cable assemblies required? Passive cables have no signal amplification in the assembly and rely on host system Electronic Dispersion Compensation (EDC) for signal amplification/equalization. Active cable assemblies have signal amplification and equalization built into the assembly and typically used in host systems that do not employ EDC. If passive cables are needed, is equalization required? Equalization is the process of reducing distortion over a transmission path by using compensating devices (resistors, capacitors, etc). These equalizers are added to the cable plug PCB and act as filters to improve the cable assembly's frequency response. These filters reduce jitter and open the cable's eye pattern. What cable lengths are required? Cable length and wire gauge are related to the performance characteristics of the cable assembly. Longer cable lengths require heavier wire gauge, while shorter lengths can use a smaller gauge cable. Smaller gauge cable assemblies provide many benefits to the data center operator, such as ease of routing, less weight and increased airflow. TE offers QSFP/QSFP+ cable assemblies in wire gauges #26 through #33 to support customers' specific cable routing requirements. Are there other special customer requirements? Examples of special requirements include custom cable lengths, EEPROM programming, labeling and packaging. We can custom engineer cables to specific customer system architecture. DATA COMMUNICATIONS /// QSFP+ SOLUTIONS For More Information TE Technical Support Center USA: 1.800.522.6752 Canada: 1 .905.475.6222 Mexico: 52.0.55.1106.0800 Latin/S. America: 54.0.11.4733.2200 Germany: 49.0.6251.133.1999 UK: 44.0.800.267666 France: 33.0.1.3420.8686 Netherlands: 31.0.73.6246.999 China: 86.0.400.820.6015 te.com/products/qsfp PARALIGHT, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. (c) 2014 TE Connectivity Ltd. family of companies. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. DATA COMMUNICATIONS /// QSFP+ SOLUTIONS