Pb Lead-free Green A product Line of Diodes Incorporated PI3DBS16412 3.3V, 1-20Gbps 2-Lane 2:1 Mux/De-Mux Switch Features Description II 4 Differential Channel, 2:1 Mux/DeMux The PI3DBS16412 is an 8 to 4 differential channel multiplexer/ demultiplexer switch. This solution can switch multiple signal types up to data rate of 20Gbps. Using a unique design technique, Diodes has been able to minimize the impedance of the switch such that the attenuation observed through the switch is minimal. The unique design technique also offers a layout targeted for USB3.0, USB3.1, 10GE, Thunderbolt 3, and SAS3.0 signals, which minimizes the channel to channel skew as well as channel to channel crosstalk as required by high speed signals. II Up to 20 Gbps for applications including USB3.0, USB3.1, 10GE, Thunderbolt 3, and SAS3.0 II Bi-directional operation II 3dB bandwith: 13 GHz II Low Bit-to-Bit Skew, 3ps typ II Low channel-to-channel skew, 10ps typ II Low insertion loss: -1.3dB@5 GHz, -1.3dB@8 GHz , -2dB@10 GHz II Return loss: -21dB@5 GHz, -13dB@8 GHz, -9dB@10 GHz Application II Low power consumption - 300A typ II Routing high speed differential signals such as USB3.1 Gen 2, SAS3, PCIe4, TB3 II Supply Voltage 3.3V II Industrial Temperature Range: -40oC to 85oC II Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Block Diagram II Halogen and Antimony Free. "Green" Device (Note 3) II Packaging (Pb-free & Green): - 42-contact, TQFN (ZH42), 3.5x9mm - 40-contact, TQFN (ZLC40), 3x6mm A0+ B0+ A0- B0- A1+ B1+ A1- B1C0+ C0C1+ C1- A2+ B2+ A2- B2- A3+ B3+ A3- B3C2+ C2C3+ C3- SEL1 SEL2 Control PD1 PD2 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. PI3DBS16412 Document Number DS40277 Rev 4-2 1 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 42 41 40 39 GND PD1 VDD GND B0+ B0- GND Pin Configuration: 40-TQFN (ZLC) 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 B0+ B0B1+ B1C0+ C0C1+ C1VDD B2+ B2B3+ B3C2+ C2C3+ C3- A0+ A0VDD A1+ A1SEL1 VDD PD2 A2+ A2VDD GND A3+ A3- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 B1+ B1C0+ C0C1+ C1VDD GND B2+ B2B3+ B3C2+ C2- 15 16 17 18 19 20 NC GND VDD GND GND SEL2 VDD 18 19 20 21 GND C3C3+ PD1 A0+ A0GND VDD A1+ A1SEL1 VDD PD2 A2+ A2VDD GND A3+ A3SEL2 GND VDD NC Pin Configuration: 42-TQFN (ZH) Truth Table Function SEL1 PD1 Power down & hi_z switches A0 & A1 x 1 A0 B0 A1 B1 0 0 A0 C0 A1 C1 1 0 Function SEL2 PD2 Power down & hi_z switches A2 & A3 x 1 A2 B2 A3 B3 0 0 A2 C2 A3 C3 1 0 PI3DBS16412 Document Number DS40277 Rev 4-2 2 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Pin Description Pin # 42-TQFN 40-TQFN Pin Name 2 1 A0+ 3 2 A0- 6 4 A1+ 7 5 A1- 11 9 A2+ 12 10 A2- 15 13 A3+ 16 14 A3- 38 36 B0+ 37 35 B0- 36 34 B1+ 35 33 B1- 29 26 B2+ 28 25 B2- 27 24 B3+ 26 23 B3- 34 32 C0+ 33 31 C0- 32 30 C1+ 31 29 C1- 25 22 C2+ 24 21 C2- 23 20 C3+ 22 19 C3- 8, 17 6, 16 SEL_X 5, 9, 13, 20, 30, 40 3, 7, 11, 17, 28, 38 V DD Pwr 3.3V 10% Positive Supply Voltage 4, 14, 19, 21, 39, 41, Center Pad 12, 15, 18, 27, 37, 40, Center Pad GND Pwr Power ground 1, 10 39, 8 PD_X I 18, 42 PI3DBS16412 Document Number DS40277 Rev 4-2 NC I/O Description I/O Signal I/O, Channel 0, Port A, 100K pull-down I/O Signal I/O, Channel 1, Port A, 100K pull-down I/O Signal I/O, Channel 2, Port A, 100K pull-down I/O Signal I/O, Channel 3, Port A, 100K pull-down I/O Signal I/O, Channel 0, Port B I/O Signal I/O, Channel 1, Port B I/O Signal I/O, Channel 2, Port B I/O Signal I/O, Channel 3, Port B I/O Signal I/O, Channel 0, Port C I/O Signal I/O, Channel 1, Port C I/O Signal I/O, Channel 2, Port C I/O Signal I/O, Channel 3, Port C I Operation mode Select (when SEL=0: AB, when SEL=1: AC Power Down Selet PD_X = 0, Device enable, PD_X = 1, Device disable channel stay hi_z No Connect 3 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Maximum Ratings (Above which useful life may be impaired. For user guidelines, not tested.) Storage Temperature .....................................................-65C to +150C Supply Voltage to Ground Potential .................................-0.5V to +3.7V Channel DC Input Voltage ................................................. -0.5V to 1.5V DC Output Current ........................................................................ 120mA Power Dissipation ............................................................................ 0.5W Control Logic DC Input Voltage .....................................................-0.5V Maximum Stress Voltage (MSV).......................................................3.8V ESD (HBM)....................................................................................... 1KV Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Electrical Characteristics Recommended Operating Conditions Symbol Parameter Conditions Min. Typ. Max. Units 3.0 3.3 3.6 V 1.8 mA VDD 3.3V Power Supply IDD Current consumption in normal operation SEL = GND or VDD, PD = Low 0.5 IDDQ Current consumption when all switches are disabled VDD = 3.3V, PD = High 0.3 mA PDD Total Power from VDD 3.3V supply Control pins = GND or VDD 2 mW PDDQ Power consumption when all switches are disabled VDD = 3.3V, PD = High 1.1 mW TA Operating temperature range -40 85 oC Max. Units DC Electrical Characteristics for Switching over Operating Range Parameters Description Test Conditions(1) VIH - cntrl signals Input HIGH Voltage for SEL and PD VDD = 3.3V VIL - cntrl signals Input LOW Voltage for SEL and PD VDD = 3.3V VIK Clamp Diode Voltage VDD = Max., Iinput = -18mA IIH_ctrl Input HIGH Current for SEL and PD VDD = Max., Vinput = 3.3V -50 +50 IIL_ctrl Input LOW Current for SEL and PD VDD = Max., Vinput = 0V -10 +10 IOZH HighZ HIGH Current, switch I/O pins VDD = 3.3V., Vinput = 1.0V -10 +10 A IOZL HighZ LOW Current, switch I/O pins VDD = Max., Vinput = 0V -10 +10 A Input HIGH Current for AN VDD = Max., Vinput = 1.2V -20 +20 A Input HIGH Current for BN, CN VDD = Max., Vinput = 1.2V -10 +10 A IIL Input LOW Current for AN, BN & CN VDD = Max., Vinput = 0V -10 +10 A Vp Max voltage pass through tolerance analog switches (See Test Circuit) VDD = 3.3V, IPASS = 10mA VIN Analog Signal to input of switch IIH Min. Typ.(1) 1.4 0.4 -0.7 -1.2 1 1.1 V A V 1.2 V Note: 1. Typical values are at VDD = 3.3V, TA = 25C ambient and maximum loading. PI3DBS16412 Document Number DS40277 Rev 4-2 4 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Dynamic Electrical Characteristics Parameter DDIL DDRL DDOI DDXT BW Description Differential Insertion Loss Differential Return Loss Differential OFF Isolation Differential Crosstalk Test Conditions Min. Typ.(1) f=2.5GHz -0.8 f=4.0GHz -0.9 f=5.0GHz -1.2 f=8.0GHz -1.3 f=10.0GHz -2.0 f= 2.5GHz -25.0 f= 4.0GHz -24.0 f= 5.0GHz -21.0 f= 8.0GHz -13.0 f=10.0GHz -9.0 f= 2.5GHz -27.0 f= 4.0GHz -21.0 f= 5.0GHz -19.0 f= 8.0GHz -18.0 f=10.0GHz -19.0 f= 2.5GHz -30.0 f= 4.0GHz -29.0 f= 5.0GHz -29.0 f=8.0GHz -30.0 f=10.0GHz -33.0 3dB Bandwidth Max. Units dB dB dB dB 13 GHz Switching Characteristics Symbol Parameter tPZH, tPZL Typ. Max. Units Line Enable Time - SEL to AN, BN, CN 200 350 ns tPHZ , tPLZ Line Disable Time - SEL to AN, BN, CN 200 350 ns tPLH Propagation Delay, LOW to HIGH 50 ps tPHL Propagation Delay, HIGH to LOW 50 ps tb-b Bit-to-bit skew within the same differential pair 3 10 ps tch-ch Channel-to-channel skew 10 20 ps PI3DBS16412 Document Number DS40277 Rev 4-2 Test Conditions 5 Min. www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 + BALANCED PORT1 - BALANCED PORT1 + + + 50 - - 50 BALANCED - PORT2 + - DUT DUT Diff. Insertion Loss and Return Loss Test Circuit BALANCED PORT1 BALANCED PORT2 BALANCED PORT2 + + 50 - - 50 + + 50 - - 50 Diff. Off Isolation Test Circuit DUT Diff. Near End Xtalk Test Circuit Test Circuit for Electrical Characteristics(1-5) 2.0V VDD 600-ohm Pulse Generator VIN VOUT SEL D.U.T 4pF CL RT 600-ohm Notes: 1. CL = Load capacitance: includes jig and probe capacitance. 2. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator 3. Output 1 is for an output with internal conditions such that the output is low except when disabled by the output control. output 2 is for an output with internal conditions such that the output is high except when disabled by the output control. 4. All input impulses are supplied by generators having the following characteristics: PRR MHz, ZO = 50, tR 2.5ns, tF 2.5ns. 5. The outputs are measured one at a time with one transition per measurement. PI3DBS16412 Document Number DS40277 Rev 4-2 6 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Switch Position Test Switch tPLZ, tPZL 2.0V tPHZ, tPZH GND Switching Waveforms SEL VDD/2 VDD VDD/2 0V Output 1 tPZL tPLZ VOH=VP VSwing/2 VOL + 0.15V tPHZ tPZH VOH - 0.15V VSwing/2 Output 2 VOL VOH=VP VOL Voltage Waveforms Enable and Disable Times Test Circuit for Propagation Delay IN+ OUT+ IN- OUT50 PI3DBS16412 Document Number DS40277 Rev 4-2 7 50 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Test Circuit for SEL Switching Time Differential Input/Output Signal Waveform VDD IN+ IN- 0V Port 1 OUT+ OUT- Port 2 0V D.U.T COM Port PD or SEL tPLH 4pF CL 200-ohm Pulse Generator tPHL Test Circuit for Max Voltage Pass through VDD IPASS VIN VOUT Part Marking ZH Package PI3DBS 16412ZHE YYWWXX YY: Year WW: Workweek 1st X: Assembly Code 2nd X: Fab Code PI3DBS16412 Document Number DS40277 Rev 4-2 ZLC Package PI3DBS16 412ZLCE YYWWXX YY: Year WW: Workweek 1st X: Assembly Code 2nd X: Fab Code 8 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Packaging Mechanical: 42-TQFN (ZH) 17-0266 PI3DBS16412 Document Number DS40277 Rev 4-2 9 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 Packaging Mechanical: 40-TQFN (ZLC) For latest package info. please check: http://www.diodes.com/design/support/packaging/pericom-packaging/packaging-mechanicals-and-thermal-characteristics/ Ordering Information Ordering Number Package Code Package Description PI3DBS16412ZHEX ZH 42-Contact, Very Thin Quad Flat No-Lead (TQFN) PI3DBS16412ZLCEX ZLC 40-Pin, 3x6mm (TQFN) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. E = Pb-free and Green 5. X suffix = Tape/Reel PI3DBS16412 Document Number DS40277 Rev 4-2 10 www.diodes.com June 2019 Diodes Incorporated A product Line of Diodes Incorporated PI3DBS16412 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2016, Diodes Incorporated www.diodes.com PI3DBS16412 Document Number DS40277 Rev 4-2 11 www.diodes.com June 2019 Diodes Incorporated