Product family data sheet
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS90 REV 1J
Cree® XLamp® XB-H LEDs
PRODUCT DESCRIPTION
The XLamp® XB-H LED delivers a
breakthrough combination of lumen
output and efcacy in a small package.
Delivering more than 500 lumens at
1.5A, 25°C in a 2.45mm2 package, the
Cree XB-H LED offers triple the lumen
density of competing high‑power LEDs
to signicantly increase the performance
of today’s lighting designs. The XB‑H LED
joins a new generation of directionally
optimized LEDs that offers the industry’s
highest optical control factor (OCF),
a measurement of how LED size and
performance benet directional lighting
applications. High‑OCF LEDs enable
lighting manufacturers to improve the
performance of any lighting design, create
smaller and less expensive systems, and
develop new lighting solutions that were
previously not possible.
FEATURES
• Available in white, outdoor white
and 80‑, 85‑ and 90‑CRI white
• ANSI‑compatible chromaticity bins
• Binned at 85°C
• Maximum drive current: 1500mA
• Low thermal resistance: 4°C/W
• Wide viewing angle: 110°
• Unlimited oor life at
≤ 30ºC/85% RH
• Reow solderable ‑ JEDEC
J‑STD‑020C
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ........................................2
Flux Characteristics ................................3
Relative Spectral Power Distribution .....4
Relative Flux vs. Junction
Temperature ...........................................4
Electrical Characteristics ........................5
Relative Flux vs. Current .........................5
Relative Chromaticity vs Current and
Temperature ............................................6
Typical Spatial Distribution .....................7
Thermal Design .......................................7
Reow Soldering Characteristics ...........8
Notes .......................................................9
Mechanical Dimensions .......................11
Tape and Reel ........................................12
Packaging ..............................................13
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XB-H LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 4
Viewing angle (FWHM) degrees 110
Temperature coefcient of voltage mV/°C ‑2.2
ESD withstand voltage (HBM per Mil‑Std‑883D) V 8000
DC forward current mA 1500
Reverse voltage V 5
Forward voltage (@ 700mA, 85 °C) V2.9 3.3
Forward voltage (@ 1000mA, 85 °C) V3.0
Forward voltage (@ 1500mA, 85 °C) V3.15
LED junction temperature °C 150
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XB-H LED
FLUX CHARACTERISTICS (TJ 
The following table provides several base order codes for XLamp XB‑H LEDs. It is important to note that the base order codes listed here
are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the
order‑code nomenclature, please consult the XLamp XB LED Family Binning and Labeling document.
Color
CCT Range Minimum Luminous Flux

Calculated
Minimum
Luminous Flux

 Order Code
Min. Max. Group 

Flux


1.0 A 1.5 A
Cool White 5000 K 8300 K
T6 280 322 372 499 XBHAWT‑00‑0000‑000LT60E1
T5 260 299 345 463 XBHAWT‑00‑0000‑000LT50E1
T4 240 276 318 428 XBHAWT‑00‑0000‑000LT40E1
T3 220 253 292 392 XBHAWT‑00‑0000‑000LT30E1
Outdoor White 3200 K 5300 K
T6 280 322 372 499 XBHAWT‑00‑0000‑0000T60E3
T5 260 299 345 463 XBHAWT‑00‑0000‑0000T50E3
T4 240 276 318 428 XBHAWT‑00‑0000‑0000T40E3
T3 220 253 292 392 XBHAWT‑00‑0000‑0000T30E3
Neutral White 3700 K 5300 K
T5 260 299 345 463 XBHAWT‑00‑0000‑000LT50E4
T4 240 276 318 428 XBHAWT‑00‑0000‑000LT40E4
T3 220 253 292 392 XBHAWT‑00‑0000‑000LT30E4
80‑CRI Minimum
White 2600 K 4300 K
T4 240 276 318 428 XBHAWT‑00‑0000‑000HT40E5
T3 220 253 292 392 XBHAWT‑00‑0000‑000HT30E5
Warm White 2600 K 3700 K
T4 240 276 318 428 XBHAWT‑00‑0000‑0000T40E7
T3 220 253 292 392 XBHAWT‑00‑0000‑0000T30E7
T2 200 230 265 356 XBHAWT‑00‑0000‑0000T20E7
85‑CRI Minimum
White 2600 K 3200 K
T2 200 230 265 356 XBHAWT‑00‑0000‑000PT20E7
S6 182 209 242 324 XBHAWT‑00‑0000‑000PS60E7
S5 172 198 228 306 XBHAWT‑00‑0000‑000PS50E7
90‑CRI Minimum
White 2600 K 3200 K
S6 182 209 242 324 XBHAWT‑00‑0000‑000US60E7
S5 172 198 228 306 XBHAWT‑00‑0000‑000US50E7
S4 164 186 218 292 XBHAWT‑00‑0000‑000US40E7
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 9).
• Typical CRI for Cool White (5000K ‑ 8300K CCT) is 70.
• Typical CRI for Neutral White (3700K ‑ 5300K CCT) is 75.
• Typical CRI for Warm White (2600K ‑ 3700K CCT) is 80.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 1A and 1.5A are for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XB-H LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
Cool White
Warm White
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XB-H LED
ELECTRICAL CHARACTERISTICS (TJ
RELATIVE FLUX VS. CURRENT (TJ
Electrical Characteristics (Tj = 25ºC)
0
300
600
900
1200
1500
2.50 2.75 3.00 3.25
Forward Current (mA)
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 25ºC)
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
0300 600 900 1200 1500
Relative Luminous Flux
Forward Current (mA)
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XB-H LED

* Warm White XLamp XB‑H LEDs have a typical CRI of 80.
Delta CCT vs. Current
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
100 300 500 700 900 1100 1300 1500
Current (mA)
ΔCCx
ΔCCy
Delta CCT vs Temp
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XB-H LED
TYPICAL SPATIAL DISTRIBUTION
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Typical Spatial Radiation Pattern
0%
20%
40%
60%
80%
100%
-90 -60 -30 030 60 90
Relative Luminous Intensity
Angle (º)
Thermal Design
0
200
400
600
800
1000
1200
1400
1600
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10 °C/W
Rj-a = 15 °C/W
Rj-a = 20 °C/W
Rj-a = 25 °C/W
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XB-H LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XB‑H LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp‑Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL)45‑90 seconds
Peak/Classication Temperature (Tp) 235 ‑ 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20‑40 seconds
Ramp‑Down Rate 1 ‑ 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J‑STD‑020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XB-H LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.

Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specic LM‑80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture‑barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XB‑H LEDs may be stored as MSL 1 per JEDEC J‑STD‑033, meaning they have unlimited oor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up‑to‑date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XB-H LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XB-H LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
2.45
2.45
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
2.45
2.45
R1.53
0.65
2.28
2.29 REF.
2.29 REF.
2.29
0.36
0.33
0.92
2.29
0.92
2.29
0.36
2.29 2.29
2.29
0.39
0.85
0.85
0.25
1.95
0.17
1/131.000
C
2610-00038
XBH OUTLINE
11/20/13D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
RECOMMENDED PCB SOLDER PAD
ALTENATIVE
PRIMARY
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Top View Side View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
2.45
2.45
R1.53
0.65
2.28
2.29 REF.
2.29 REF.
2.29
0.36
0.33
0.92
2.29
0.92
2.29
0.36
2.29 2.29
2.29
0.39
0.85
0.85
0.25
1.95
0.17
1/131.000
C
2610-00038
XBH OUTLINE
11/20/13D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
RECOMMENDED PCB SOLDER PAD
ALTENATIVE
PRIMARY
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Bottom View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
2.45
2.45
R1.53
0.65
2.28
2.29 REF.
2.29 REF.
2.29
0.36
0.33
0.92
2.29
0.92
2.29
0.36
2.29 2.29
2.29
0.39
0.85
0.85
0.25
1.95
0.17
1/131.000
C
2610-00038
XBH OUTLINE
11/20/13D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
RECOMMENDED PCB SOLDER PAD
ALTENATIVE
PRIMARY
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Alternate Bottom View
Anode Anode
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
2.45
2.45
R1.53
0.65
2.28
2.29 REF.
2.29 REF.
2.29
0.36
0.33
0.92
2.29
0.92
2.29
0.36
2.29
2.29
2.29
0.39
0.85
0.85
0.25
1.95
0.17
1/131.000
C
2610-00038
XBH OUTLINE
11/20/13D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
RECOMMENDED PCB SOLDER PAD
ALTENATIVE
PRIMARY
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
2.45
2.45
R1.53
0.65
2.28
2.29 REF.
2.29 REF.
2.29
0.36
0.33
0.92
2.29
0.92
2.29
0.36
2.29
2.29
2.29
0.39
0.85
0.85
0.25
1.95
0.17
1/131.000
C
2610-00038
XBH OUTLINE
11/20/13D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
RECOMMENDED PCB SOLDER PAD
ALTENATIVE
PRIMARY
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Recommended PCB Solder Pad Recommended Stencil Pattern

Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® XB-H LED
TAPE AND REEL
All Cree carrier tapes conform to EIA‑481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
B
B
4°
8.00 ±.10
4.00 ±.10
2.00 ±.10
+.10/-.001.50
± .101.00
.30 ± .10
12.00 Nominal
12.30 Max
5.50 ±.10
1.75 ±.10
10.25 ±.10
2.60+/-0.1mm
2.60 +/-0.1
2.05+/-0.1
REVISONS
REV DESCRIPTION BY DATEAPP'D
A Released DC 10/23/11
JL
BADDED CATHODE AND ANODE NOTE
DC 2/26/12
C CHANGED POCKET DIMS AND TOLERANCES
DC 8/3/12
DCHANGED POCKET DIM TO INSIDE OF POCKET IN BOTTOM VIEW
DC 2/1/18
1/14.000
D
2402-00020
Carrier Tape, 2525 HEW
10/23/11D. CRONIN
Notes:
1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm
REFERENCE VENDOR PART NUMBER 020246
CATHODE SIDE
ANODE SIDE
B-BSECTION
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
B
B
4°
8.00 ±.10
4.00 ±.10
2.00 ±.10
+.10/-.001.50
± .101.00
.30 ± .10
12.00 Nominal
12.30 Max
5.50 ±.10
1.75 ±.10
10.25 ±.10
2.60+/-0.1mm
2.60 +/-0.1
2.05+/-0.1
REVISONS
REV DESCRIPTION BY DATEAPP'D
A Released DC 10/23/11
JL
BADDED CATHODE AND ANODE NOTE
DC 2/26/12
C CHANGED POCKET DIMS AND TOLERANCES
DC 8/3/12
DCHANGED POCKET DIM TO INSIDE OF POCKET IN BOTTOM VIEW
DC 2/1/18
1/14.000
D
2402-00020
Carrier Tape, 2525 HEW
10/23/11D. CRONIN
Notes:
1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm
REFERENCE VENDOR PART NUMBER 020246
CATHODE SIDE
ANODE SIDE
B-BSECTION
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® XB-H LED
PACKAGING
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cree, Inc.:
XBHAWT-00-0000-000PS60F8 XBHAWT-00-0000-0000T50C3 XBHAWT-00-0000-000HT20Z7 XBHAWT-00-0000-
000PS50Z8 XBHAWT-00-0000-000US40Z7 XBHAWT-00-0000-000LT30E4 XBHAWT-00-0000-0000T30E4
XBHAWT-00-0000-0000T30C3 XBHAWT-00-0000-000US50E8 XBHAWT-00-0000-000LT30Z5 XBHAWT-00-0000-
0000T40C3 XBHAWT-00-0000-000HT30E6 XBHAWT-00-0000-000LT20F8 XBHAWT-00-0000-0000T20E6 XBHAWT-
00-0000-0000T40F7 XBHAWT-00-0000-000US40E7 XBHAWT-00-0000-000LT30E1 XBHAWT-00-0000-0000T30D1
XBHAWT-00-0000-000LS60Z8 XBHAWT-00-0000-000US60E7 XBHAWT-00-0000-0000T30F7 XBHAWT-00-0000-
000HT30F8 XBHAWT-00-0000-000LT20E8 XBHAWT-00-0000-000US60F8 XBHAWT-00-0000-000LT5053 XBHAWT-
00-0000-000US60Z7 XBHAWT-00-0000-000LT40E4 XBHAWT-00-0000-000US40F8 XBHAWT-00-0000-0000T50C2
XBHAWT-00-0000-000HT20F7 XBHAWT-00-0000-0000T50F5 XBHAWT-00-0000-000LT3053 XBHAWT-00-0000-
000LT20Z8 XBHAWT-00-0000-000LT40E1 XBHAWT-00-0000-0000T30D3 XBHAWT-00-0000-000LT30F6 XBHAWT-
00-0000-000HT30Z6 XBHAWT-00-0000-0000T20F6 XBHAWT-00-0000-0000T30D4 XBHAWT-00-0000-000HT30E7
XBHAWT-00-0000-0000T30F6 XBHAWT-00-0000-000LT30F5 XBHAWT-00-0000-0000T50E4 XBHAWT-00-0000-
000LT30E7 XBHAWT-00-0000-0000T40C6 XBHAWT-00-0000-000LT50E2 XBHAWT-00-0000-0000T40E7 XBHAWT-
00-0000-000PS50E7 XBHAWT-00-0000-000PT20E7 XBHAWT-00-0000-000HT30F7 XBHAWT-00-0000-000LS60F8
XBHAWT-00-0000-000LT4050 XBHAWT-00-0000-000PS40E8 XBHAWT-00-0000-000LT30F4 XBHAWT-00-0000-
0000T40F6 XBHAWT-00-0000-000LT20E6 XBHAWT-00-0000-000HT20F8 XBHAWT-00-0000-0000T50E3 XBHAWT-
00-0000-0000T30F5 XBHAWT-00-0000-000LT5051 XBHAWT-00-0000-000PS40Z8 XBHAWT-00-0000-000LT40Z5
XBHAWT-00-0000-000LS60E8 XBHAWT-00-0000-000PS50F8 XBHAWT-00-0000-0000T40F5 XBHAWT-00-0000-
0000T40C5 XBHAWT-00-0000-000HT40E6 XBHAWT-00-0000-000US40E8 XBHAWT-00-0000-000US50Z7
XBHAWT-00-0000-0000T30E6 XBHAWT-00-0000-0000T40E6 XBHAWT-00-0000-0000T50D3 XBHAWT-00-0000-
0000T30E3 XBHAWT-00-0000-000LT50F4 XBHAWT-00-0000-000US50F8 XBHAWT-00-0000-0000T40F4 XBHAWT-
00-0000-000HT20E7 XBHAWT-00-0000-000HT40Z5 XBHAWT-00-0000-000LT30E6 XBHAWT-00-0000-000LT30E5
XBHAWT-00-0000-000HT30E8 XBHAWT-00-0000-000LT30E8 XBHAWT-00-0000-000US40Z8 XBHAWT-00-0000-
0000T50D2 XBHAWT-00-0000-0000T30C1 XBHAWT-00-0000-000LT20Z6 XBHAWT-00-0000-0000T50C4 XBHAWT-
00-0000-000LT20F6 XBHAWT-00-0000-0000T50C1 XBHAWT-00-0000-0000T40D2 XBHAWT-00-0000-000LT50E1
XBHAWT-00-0000-0000T50F4 XBHAWT-00-0000-0000T40C1 XBHAWT-00-0000-000LT50E4 XBHAWT-00-0000-
0000T40E5 XBHAWT-00-0000-000HS60F8 XBHAWT-00-0000-000LT40E6 XBHAWT-00-0000-000HT30F6
XBHAWT-00-0000-000LT3051 XBHAWT-00-0000-0000T30D2