Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 GENERAL DESCRIPTION High-voltage, high-speed planar-passivated npn power switching transistor in the TO92 envelope intended for use in compact fluorescent lamps and low power electronic lighting ballasts, converters and inverters, etc. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT VCESM VCBO VCEO IC ICM Ptot VCEsat hFE tfi Collector-emitter voltage peak value Collector-Base voltage (open emitter) Collector-emitter voltage (open base) Collector current (DC) Collector current peak value Total power dissipation Collector-emitter saturation voltage VBE = 0 V 0.24 14 50 700 700 400 1.0 2.0 2 1.0 20 70 V V V A A W V Fall time (Inductive) PINNING - TO92 PIN Tlead 25 C IC = 0.75 A;IB = 150mA IC = 0.75 A;VCE = 5 V IC = 1.0 A;IBON = 200mA PIN CONFIGURATION SYMBOL DESCRIPTION 1 Emitter 2 Collector 3 Base ns c b e 3 2 1 LIMITING VALUES Limiting values in accordance with the Absolute Maximum Rating System (IEC 134) SYMBOL PARAMETER CONDITIONS VCESM VCEO VCBO IC ICM IB IBM Ptot Tstg Tj Collector to emitter voltage Collector to emitter voltage (open base) Collector to base voltage (open emitter) Collector current (DC) Collector current peak value Base current (DC) Base current peak value Total power dissipation Storage temperature Junction temperature VBE = 0 V Tlead 25 C MIN. MAX. UNIT -65 - 700 400 700 1.0 2.0 0.5 1.0 2 150 150 V V V A A A A W C C TYP. MAX. UNIT - 60 K/W 150 - K/W THERMAL RESISTANCES SYMBOL PARAMETER Rth j-lead Thermal resistance junction to lead Rth j-a Thermal resistance Junction to ambient September 1999 CONDITIONS pcb mounted; lead length = 4mm 1 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 STATIC CHARACTERISTICS Tlead = 25 C unless otherwise specified SYMBOL PARAMETER CONDITIONS ICES,ICBO ICES Collector cut-off current 1 ICEO IEBO VCEOsust Collector cut-off current Emitter cut-off current Collector-emitter sustaining voltage VCEsat VBEsat Collector-emitter saturation voltage Base-emitter saturation voltage VBE = 0 V; VCE = VCESMmax VBE = 0 V; VCE = VCESMmax; Tj = 125 C VCEO = VCEOMmax(400V) VEB = 9 V; IC = 0 A IB = 0 A; IC = 10mA; L = 25 mH IC = 0.75 A;IB = 0.15 A IC = 0.75 A; IB =0.15 A hFE hFE hFE DC current gain IC = 10mA; VCE = 5 V IC = 100mA; VCE = 5 V IC = 0.75 A; VCE = 5 V MIN. TYP. MAX. UNIT - 0.8 2.0 100 500 A A 400 0.05 - 100 100 - A A V - 0.24 0.93 1.0 1.3 V V 11 12.5 9 20 21 14 27 31 20 TYP. MAX. UNIT 0.65 0.88 250 0.88 1.2 338 s s ns 0.51 50 0.7 70 s ns - 1.4 130 s ns DYNAMIC CHARACTERISTICS Tlead = 25 C unless otherwise specified SYMBOL ton ts tf PARAMETER CONDITIONS Switching times (resistive load) ICon = 1.0 A; IBon = -IBoff = 200mA; RL = 75 ohms; VBB2 = 4 V; Turn-on time Turn-off storage time Turn-off fall time Switching times (inductive load) ts tf Turn-off storage time Turn-off fall time Switching times (inductive load) ts tf Turn-off storage time Turn-off fall time ICon = 1.0 A; IBon = 200mA; LB = 1 H; -VBB = 5 V ICon = 1.0 A; IBon = 200mA; LB = 1 H; -VBB = 5 V; Tj = 100 C 1 Measured with half sine-wave voltage (curve tracer). September 1999 2 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 ! + 50v 100-200R 100 Zth / (K/W) 0.5 10 0.2 0.1 0.05 1 0.02 Horizontal Oscilloscope PD Vertical tp D= tp T 0.1 30-60 Hz D=0 1R 300R 0.01 Fig.1. Test circuit for VCEOsust. 1u t T 6V 10u 100u 1m 10m 100m t/s 1 10 100 Fig.4. Transient thermal impedance. Zth j-lead = f(t); parameter D = tp/T HFE 30 IC / mA 125 C 20 15 -40 C 10 25 C 250 VCE = 1V 5 100 10 0 min VCE / V VCEOsust 1 0.001 Fig.2. Oscilloscope display for VCEOsust. 0.01 0.1 IC/A 1 2 3 5 Fig.5. Typical DC current gain. hFE = f(IC) parameter VCE 120 HFE 30 Normalised Power Derating PD% 125 C 110 100 90 -40 C 25 C 80 10 70 VCE = 5V 60 50 40 30 20 10 0 0 20 40 60 80 100 Tmb / C 120 140 1 0.001 Fig.3. Normalised power dissipation. PD% = 100PD/PD 25C = f (Tmb) September 1999 0.01 0.1 IC/A 1 2 3 5 Fig.6. Typical DC current gain. hFE = f(IC) parameter VCE 3 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 VBEsat VOLTAGE/V 1.5 VCEsat VOLTAGE/V 2 1.4 IC/IB = 3 1.3 125 C 1.5 1.2 1.1 1 -40 C 1 IC/IB = 3 25 C 0.9 25 C 0.8 0.5 0.7 125 C 0.6 -40 C 0 0.01 0.1 IC, COLLECTOR CURRENT/A 1 0.5 0.01 2 Fig.7. Collector-Emitter saturation voltage. Solid Lines = typ values, IC/IB = 3 0.1 IC, COLLECTOR CURRENT/A 1 2 Fig.8. Base-Emitter saturation voltage. Solid Lines = typ values, IC/IB = 3 INDUCTIVE SWITCHING VCC ICon 90 % IC LC 10 % ts IBon LB tf t toff T.U.T. IBon IB -VBB t -IBoff Fig.9. Test circuit inductive load. VCC = 300 V; -VBE = 5 V, LC = 200 H; LB = 1 H Fig.10. Switching times waveforms with inductive load. tfi (ns) 275 tfi (ns) 275 250 250 IC = 2A 225 IC/IB = 10 225 200 200 175 175 IC = 1.5A 150 150 125 125 100 IC/IB =3 100 IC = 1A 75 75 50 50 25 25 0 0 2 4 6 HFE GAIN (IC/IB) 8 10 0.8 11 Fig.11. Inductive switching. tfi = f(hFE) September 1999 IC/IB = 5 1 1.2 1.4 1.6 IC COLLECTOR CURRENT /A 1.8 2 2.2 Fig.12. Inductive switching. tfi = f(IC) 4 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 tsi (us) 1.25 tsi (us) 1.25 IC = 2A 1 1 IC = 1.5A 0.75 0.75 0.5 0.5 IC/IB = 3 IC/IB = 5 IC = 1A 0.25 IC/IB = 10 0.25 0 2 4 6 HFE GAIN (IC/IB) 8 10 0 0.8 11 Fig.13. Inductive switching. tsi = f(hFE) 1 1.2 1.4 1.6 IC COLLECTOR CURRENT /A 1.8 2 2.2 Fig.14. Inductive switching. tsi = f(IC) RESISTIVE SWITCHING VCC ICon 90 % 90 % IC RL 10 % ts VIM RB ton 0 IBon IB tp tf toff T.U.T. 10 % T tr 30ns -IBoff Fig.15. Test circuit resistive load. VIM = -6 to +8 V VCC = 250 V; tp = 20 s; = tp / T = 0.01. RB and RL calculated from ICon and IBon requirements. Fig.16. Switching times waveforms with resistive load. ts (us) ton (us) 2 3 IC/IB = 10 2.5 1.5 2 IC/IB = 5 1 IC/IB = 5 1.5 IC/IB = 3 1 0.5 0.5 IC/IB = 3 0 0 0.5 1 1.5 0 2 0 IC COLLECTOR CURRENT (A) 0.5 1 1.5 2 2.5 IC COLLECTOR CURRENT (A) Fig.17. Resistive switching. ton = f(IC) September 1999 IC/IB = 10 Fig.18. Resistive switching. ts = f(IC) 5 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 tf (ns) 5,000 2,000 1,000 IC/IB = 5 IC/IB = 3 IC/IB = 10 100 50 0 0.5 1 1.5 IC COLLECTOR CURRENT (A) 2 Fig.19. Resistive switching. tf = f(IC) IC/A VCC 2.5 2.25 2 1.75 LC 1.5 1.25 VCL(RBSOAR) IBon 1 PROBE POINT LB 0.75 0.5 -VBB -9V -5V T.U.T. 0.25 -3V -1V 0 0 100 200 300 400 500 600 700 800 VCEclamp/V Fig.21. Reverse bias safe operating area Tj Tjmax for -VBE = 9V, 5V,3V & 1V Fig.20. Test Circuit for the RBSOA test. Vcl 700V; Vcc = 150V; LB = 1H; Lc = 200H September 1999 6 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 MECHANICAL DATA Plastic single-ended leaded (through hole) package; 3 leads SOT54 c E d A L b 1 e1 2 D e 3 b1 L1 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b b1 c D d E e e1 L L1(1) mm 5.2 5.0 0.48 0.40 0.66 0.56 0.45 0.40 4.8 4.4 1.7 1.4 4.2 3.6 2.54 1.27 14.5 12.7 2.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. REFERENCES OUTLINE VERSION IEC SOT54 JEDEC EIAJ TO-92 SC-43 EUROPEAN PROJECTION ISSUE DATE 97-02-28 Fig.22. TO92 ; plastic envelope; Net Mass: 0.2 g Notes 1. Epoxy meets UL94 V0 at 1/8". September 1999 7 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ100 DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1999 8 Rev 1.000