SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
3.5x3.5 mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
zWhite SMD package, silicone resin.
zLow thermal resistance.
zCompatible with IR-reflow processes.
zESD protection.
zPackage: 2000pcs / reel.
zMoisture sensitivity level : level 2a.
zRoHS compliant
Description
The source color devices are made with InGaN on Al2O3
substrate Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Applications
zSignal and symbol luminaire for orientation.
zMarker lights (e.g. steps, exit ways, etc).
zDecorative and entertainment lighting.
zCommercial and residential lighting.
zAutomotive interior lighting.
Part Number: AA3535QR425Z1S-N1 Neutral White
SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
Selection Guide
Notes:
1.Results from mounting on PC board FR4(pad size ≥70mm2), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter Symbol Value Unit
Power Dissipation PD 600 mW
Junction Temperature [1] TJ 110 °C
Operating Temperature Top -40 To +10 0 °C
Storage Temperature Ts tg -40 To +11 0 °C
DC Forward Current [1] IF 150 mA
Peak Forward Current [2] IFM 300 mA
Thermal Resistance [1]
(Junction/ambient) Rth j-a 180 °C/W
Thermal Resistance [1]
(Junction/solder point) Rth j-S 60 °C/W
8000 V Electrostatic Discharge Threshold (HBM)
Reverse Voltage VR 5 V
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Parameter Symbol Value Unit
Forward Voltage IF = 150mA [Min.]
VF [1]
2.7
V Forward Voltage IF = 150mA [Typ.] 3.5
Forward Voltage IF = 150mA [Max.] 4.0
Allowable Reverse Current [Max.] IR 85 mA
Temperature coefficient of VF
IF=150mA, -10 °C≤ T≤100 °C [Typ.] TCV -3.1 mV/°C
Temperature coefficient of X
IF=150mA, -10 °C≤ T≤100 °C [Typ.] TCX -0.15 10-3/°C
Temperature coefficient of Y
IF=150mA, -10 °C≤ T≤100 °C [Typ.] TCy -0.13 10-3/°C
Part No. Color
CCT Range (K) CRI
Lens Type
Iv (cd) [2]
@ 150mA
Φv (lm) [2]
@ 150mA*
V
iewing
Angle [1]
Min. Typ. Max. Typ. Min. Typ. Min. Typ. 2θ1/2
AA3535QR425Z1S-N1 Neutral White 3710 4000 4260 63 Water Clear 6.7 8 20 27 120 °
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.*LEDs are binned according to their luminous flux.
Notes:
1.Measurement tolerance of the chromaticity coordinates is ±0.01.
2.Forward Voltage: +/-0.1V.
SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50
x
y
2500 K3000 K
4000 K
5000 K
6000 K
7000 K
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
W1
W2
W3
N1
N2
C1
x y x y x y x y
1
0.4582 0.4099
8
0.4147 0.3814
15
0.3702 0.3722 0.3481 0.3557
0.4687 0.4289 0.4221 0.3984 0.3736 0.3874 0.3370 0.3472
0.4813 0.4319 0.4342 0.4028 0.3869 0.3958 0.3364 0.3328
0.4700 0.4126 0.4259 0.3853 0.3825 0.3798 0.3466 0.3411
2
0.4483 0.3919
9
0.4080 0.3916
16
0.3670 0.3578
23
0.3376 0.3616
0.4582 0.4099 0.4146 0.4089 0.3702 0.3722 0.3260 0.3512
0.4700 0.4126 0.4299 0.4165 0.3825 0.3798 0.3265 0.3371
0.4593 0.3944 0.4221 0.3984 0.3783 0.3646 0.3370 0.3472
3
0.4465 0.4071
10
0.4017 0.3751
17
0.3736 0.3874
24
0.3370 0.3472
0.4562 0.4260 0.4080 0.3916 0.3616 0.3788 0.3265 0.3371
0.4687 0.4289 0.4221 0.3984 0.3592 0.3641 0.3270 0.3230
0.4582 0.4099 0.4147 0.3814 0.3703 0.3726 0.3364 0.3328
4
0.4373 0.3893
11
0.3941 0.3848
18
0.3703 0.3726
25
0.3260 0.3512
0.4465 0.4071 0.3996 0.4015 0.3592 0.3641 0.3144 0.3408
0.4582 0.4099 0.4146 0.4089 0.3568 0.3495 0.3160 0.3274
0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3265 0.3371
5
0.4342 0.4028
12
0.3889 0.3690
19
0.3616 0.3788
26
0.3265 0.3371
0.4430 0.4212 0.3941 0.3848 0.3496 0.3702 0.3160 0.3274
0.4562 0.4260 0.4080 0.3916 0.3481 0.3557 0.3175 0.3139
0.4465 0.4071 0.4017 0.3751 0.3592 0.3641 0.3270 0.3230
6
0.4259 0.3853
13
0.3825 0.3798
20
0.3592 0.3641
27
0.3144 0.3408
0.4342 0.4028 0.3869 0.3958 0.3481 0.3557 0.3028 0.3304
0.4465 0.4071 0.4006 0.4044 0.3466 0.3411 0.3055 0.3177
0.4373 0.3893 0.3950 0.3875 0.3568 0.3495 0.3160 0.3274
7
0.4221 0.3984
14
0.3783 0.3646
21
0.3496 0.3702
28
0.3160 0.3274
0.4299 0.4165 0.3825 0.3798 0.3376 0.3616 0.3055 0.3177
0.4430 0.4212 0.3950 0.3875 0.3370 0.3472 0.3081 0.3049
0.4342 0.4028 0.3898 0.3716 0.3481 0.3557 0.3175 0.3139
22
CCT 2500-7000 K Bin Code
Color Group Chromaticity Regions CCT (K)
Min. Typ. Max.
Warm White
W1 1, 2, 3, 4 2580 2700 2870
W2 5, 6, 7, 8 2870 3000 3220
W3 9, 10, 11, 12 3220 3500 3710
N1 13, 14, 15, 16 3710 4000 4260
N2 17, 18, 19, 20, 21, 22 4260 4700 5310
Cool White C1 23, 24, 25, 26, 27, 28 5310 6000 7040
Neutral White
Notes:
Shipment may contain more than one chromaticity
regions.Orders for single chromaticity region are
generally not accepted.
Measurement tolerance of the chromaticity
coordinates is ±0.01.
SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
Reel Dimension
AA3535QR425Z1S-N1
SPEC NO: DSAK7419 REV NO: V.4 DATE: OCT/14/2011 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201005742
PACKING & LABEL SPECIFICATIONS AA3535QR425Z1S-N1
