0024K0214 SPECIFICATION CONTROL DRAWING CHEMINAX 100 OHM, AWG 24, 19 STRANDS OF AWG 36, TWIN CONDUCTOR CABLE, OUTER SPACE USE Date: Revision: 07-24-06 C THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. .025 CONDUCTOR AWG 24, 19 Strands of AWG 36, Silver-Coated High Strength Copper Alloy .051 DIELECTRICS Rayfoam (R) L Colors - Tan / White .035 FILLERS Radiation-Crosslinked Modified ETFE ELECTRICAL CHARACTERISTICS CHARACTERISTIC IMPEDANCE 100 7 ohms, Method C at 1 MHz CAPACITANCE - MUTUAL 14.5 pF/ft. (nominal) at 1 MHz VELOCITY OF PROPAGATION 76% (nominal) ADDITIONAL ELECTRICAL CONDUCTOR RESISTANCE INSULATION RESISTANCE SHIELD AWG 38, Silver-Coated Copper .119 REQUIREMENTS 26.5 ohms/1000 ft. (nominal) 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST IMPULSE TEST VOLTAGE WITHSTAND (DIELECTRIC) 1.0 kV (rms) 6.0 kV (peak) 1000 volts (rms)(minimum) ENVIRONMENTAL FLAMMABILITY HEAT SHOCK LOW TEMPERATURECOLD BEND VOLTAGE WITHSTAND (POST ENVIRONMENTAL) JACKET Radiation-Crosslinked, Modified PVF2 .143 Method B 225C -55C/4.00 inch mandrel 1000 volts (rms), for 1 minute PHYSICAL INSULATION (DIELECTRIC) (Prior to cabling) ELONGATION TENSILE STRENGTH JACKET ELONGATION TENSILE STRENGTH JACKET THICKNESS SHIELD COVERAGE WEIGHT 50% (minimum) 1000 lbf/in (minimum) 200% (minimum) 4000 lbf/in (minimum) .012 inch (nominal) 90% (minimum) 15.3 lbs/1000 ft. (nominal) OUTER SPACE REQUIREMENTS Outer jacket color will be white (designated by a "9" appended to the part number, e.g. 0024K0214-9) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. RADIATION RESISTANCE VACUUM STABILITY TOTAL MASS LOSS (TML) VOLATILE CONDENSABLE MATERIAL (VCM) 500 megorads / 4.25 inch mandrel 1.0% (maximum) 0.1% (maximum) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. R Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. (c) 2006 Tyco Electronics Corporation. All rights reserved.