Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Radial Lead Type Series : ZF Type : A Features Endurance : 1000 h at 150 C (High temperature) temperature compared with ZC series High-withstand voltage (25 V to 63 V), Low LC (0.01 CV or 3 F) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) AEC-Q200 compliant RoHS compliant High Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan d) Endurance Shelf life Damp heat (Load) F G -55 C to +150 C 25 V.DC to 63 V.DC 33 F to 150 F 56 F to 270 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (whichever is greater) Please see the attached standard products list +150 C2 C, 1000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within 30% of the initial value tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit Size code ESR after Endurance F G (/100 kHz) (-40 C) 0.4 0.3 After storage for 1000 hours at +150 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) +85 C2 C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within 30% of the initial value tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 25 V.DC 270 F Marking color : BLACK fd0.05 Negative polarity marking (-) - Capacitance (F) Series identification L1.0 3 min. 14 min. fD0.5 Pressure relief (010 and larger) Rated voltage mark (Unit : mm) Lot number Size code Rated voltage mark E V 25 V.DC 35 V.DC F0.5 270 E ZF + H J 50 V.DC 63 V.DC fD L fd F F 8.0 9.5 0.6 3.5 G 10.0 9.5 0.6 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jun. 2018 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Standard products Endurance : 150 C 1000 h Rated voltage (V.DC) 25 35 50 63 Min. packaging q'ty Specification Case size (mm) Capacitance (20 %) (F) fD L 150 8 9.5 F Ripple current (100 kHz) (+150 C) (mA r.m.s.) 800 Size code E.S.R. (100 kHz) (+20 C) (m) tan d (120 Hz) (+20 C) Part number 27 0.14 EEHAZF1E151 200 Long lead (pcs) 270 10 9.5 G 1000 20 0.14 EEHAZF1E271 200 100 8 9.5 F 770 30 0.12 EEHAZF1V101 200 150 10 9.5 G 950 23 0.12 EEHAZF1V151 200 56 8 9.5 F 700 35 0.10 EEHAZF1H560 200 100 10 9.5 G 900 28 0.10 EEHAZF1H101 200 33 8 9.5 F 650 40 0.08 EEHAZF1J330 200 56 10 9.5 G 840 30 0.08 EEHAZF1J560 200 Frequency correction factor for ripple current Rated capacitance C < 47 F 47 F < C < 150 F 150 F < C Frequency Rated capacitance C < 47 F 47 F < C < 150 F 150 F < C Frequency Rated capacitance C < 47 F 47 F < C < 150 F 150 F < C Frequency Rated capacitance C < 47 F 47 F < C < 150 F 150 F < C Frequency Correction factor Correction factor Correction factor Correction factor 100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz 0.10 0.10 0.15 0.15 0.20 0.25 0.15 0.25 0.25 1 kHz < f < 2 kHz 0.30 0.40 0.45 10 kHz < f < 15 kHz 0.60 0.70 0.75 2 kHz < f < 3 kHz 0.40 0.45 0.50 3 kHz < f < 5 kHz 0.45 0.55 0.60 500 Hz < f < 1 kHz 0.20 0.30 0.30 5 kHz < f < 10 kHz 0.50 0.60 0.65 15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz 0.65 0.70 0.75 0.75 0.80 0.80 0.80 0.85 0.85 40 kHz < f < 50 kHz 50 kHz < f < 100 kHz 100 kHz < f < 500 kHz 0.80 0.85 1.00 0.85 0.90 1.00 0.85 0.90 1.00 500 kHz < f 1.05 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jun. 2018