Switches and Indicators 14
1
4
Switches and Indicators
330
01.2000
Series 14
Description
Product Assembly
Product Range
- pushbuttons for standard mounting
- pushbuttons for flush mounting
- accessories / spare parts
Technical Data
Technical Drawing / Dimension / Layout
Circuit Drawing
Typical Applications
Marking
Page 331
Page 332
Page 353
Page 355
Page 364
Page 365
Page 366
Page 333
Page 340
Page 345
Index
Description 14
331
01.2000
1
4
General Notes
The illuminated pushbuttons with 1metre Immesion prooffront (IP 67)
combine the robust actuators of series 04 with gold plated silver
snap-action, low-level switching elements silver contacts for switch-
ing elements 2.8 mm plug-in terminals can be supplied on request for
1 changeover only.
The range includes pushbuttons, keylock switches and selector
switches.
Mounting
Mounting from the front through the mounting hole either 22.5 mm di-
ameter for raised or 30.5 mm diameter for flush.
The pushbuttons are screwed to the panel by means of a front ring
and prevented from twisting by two screws.
To ensure correct positioning of the pushbuttons we can provide a
positioning insert on request.
The universal terminals of the low-level switching elements permit
them to be mounted on printed circuit boards (PCB). These terminals
are also suitable for dip soldering. For these terminals we can also
supply a plug-in base which, when soldered on to the board, enables
the switch to be plugged in.
Lenses
The flat lenses, made of polyamide, are available in various colours,
as well as translucent or transparent.
Marking
For engravings, hot stamping and film inserts, see “Marking” on page
366.
Illumination
Perfect illumination of the different coloured lenses is assured by
lamps T 5,5 (6-60 V).
For supply voltages above 60 V, it is necessary to use a voltage re-
duction element (external series resistor, capacitor or transformer).
Do not solder the terminals directly, because of the high surface tem-
perature.
Multi-LEDs T 5,5 (6, 12, 24, 48 V) are available in the colours white,
red, yellow and green.
Position Indicating
When a switch with maintained action is actuated, the lens remains
in the depressed position mechanically. The state of the switch is ap-
parent at all times from the position of the lens.
All dimensions in mm.
We reserve the right to modify technical data.
Keylock switches
Safety lock (Index K).
Single locks (2 positions).
10 different locks with standard numbers 1001-1010. If the lock
number is not specified, we will supply No. 1001. An additional 690
lockswithnumbers 1011-1700 areavailableon request. Fornumbers
1001-1700 no master key can be supplied. Two keys are supplied
with each keylock switch.
Spare keys for KABA safety locks may be ordered by quoting
No. 14-987 (please state the lock number).
Combined locking systems
Information supplied on request.
Number structure
14-XXX.0XX Kind of terminals
Contact material
Switch variant
Example: -Illuminated pushbutton; momentary action,
gold-plated silver contact; soldering
terminals;1 switching element
14-131.025
-Lens red, transparent
704.602.2
-Front ring; aluminium, natural anodized
704.600.1
-Marking plate; white, translucent
704.609.9
Specimen order
Indicator front illumination
- indicator front illumination,
soldering terminal 14-040.005
Recommended accessories:
- lens plastic, opaque black 704.6020
- marking foil for lens plastic/metal black704.609.0
- frontring, aluminium black 704.6020
- LED. 1 chip, 12 VDC, white 10-2109.3139
Product Assembly 14
332
01.2000
illuminated-/pushbutton
1 front ring
2 lens
3 marking plate
4 switch housing
5 fixing nut
pushbutton-/illuminated pushbutton for flush mounting
1 front bezel bracket for flush mounting
2 lens
3 marking plate
4 switch housing
5 front panel
6 pressure ring
7 fixing nut
Pushbuttons for Standard Mounting 14
333
01.2000
1
4
recommended accessories:
dlens plastic →345
dmarking foil for lens plastic/metal →346
dfront ring →347
dincandescent lamp →350; LED →350
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
marking see page 366
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
recommended accessories:
dlens cap for indicator full face illumination →346
dmarking cap for lens cap for indicator full face illumination →347
dincandescent lamp →350; LED →350
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
marking see page 366
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
indicator front illumination
connection method
29 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
indicator front illumination ST/
PT 14-040.002 2 1 1 - 0,050
ST 14-040.005 2 1 1 - 0,050
UT 14-041.006 1 1 1 1 0,050
indicator full face illumination
diodes
connection method
29 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
indicator full face illumination -ST/
PT 14-030.002 2 1 1 - 0,010
ST 14-030.005 2 1 1 - 0,010
UT 14-031.006 1 1 1 1 0,011
1UT 14-741.006 3 2 1 1 0,011
2UT 14-742.006 4 2 1 1 0,011
Pushbuttons for Standard Mounting 14
334
01.2000
recommended accessories:
dlens plastic →345; lens metal →345
dmarking foil for lens plastic/metal →346
dlens raised, plastic →345
dmarking cap for lens raised plastic/metal →346
dfront ring →347
dincandescent lamp →350; LED →350
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
marking see page 366
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
illuminated-/pushbutton front illumination
switching system
contacts
diode (1N 4007)
switching action
connection method
29 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
illuminated-/pushbutton front illumination LL 1NC - main UT 14-476.036 13 5 1 1 0,015
mom UT 14-436.036 26 5 1 1 0,015
1NC + 1NO - main UT 14-473.036 16 5 1 1 0,015
mom UT 14-433.036 29 5 1 1 0,015
1NO - main UT 14-475.036 15 5 1 1 0,015
mom UT 14-435.036 28 5 1 1 0,015
2NC - main UT 14-472.036 14 5 1 1 0,015
mom UT 14-432.036 27 5 1 1 0,015
2NO - main UT 14-471.036 17 5 1 1 0,015
mom UT 14-431.036 30 5 1 1 0,015
SA 1NC + 1NO - main ST/
PT 14-271.022 12 3 1 - 0,013
ST 14-271.025 12 3 1 - 0,013
mom ST/
PT 14-131.022 25 3 1 - 0,013
ST 14-131.025 25 3 1 - 0,013
1 main UT 14-747.029 10 4 1 1 0,014
mom UT 14-743.029 23 4 1 1 0,014
2 main UT 14-748.029 11 4 1 1 0,014
mom UT 14-744.029 24 4 1 1 0,014
2NC + 2NO - main ST 14-272.025 9 3 1 - 0,015
mom ST 14-132.025 22 3 1 - 0,015
1 main UT 14-749.029 7 4 1 1 0,016
mom UT 14-745.029 20 4 1 1 0,016
2 main UT 14-750.029 8 4 1 1 0,016
mom UT 14-746.029 21 4 1 1 0,016
3NC + 3NO - main ST 14-273.025 6 3 1 - 0,017
mom ST 14-133.025 19 3 1 - 0,017
4NC + 4NO - main ST 14-274.025 5 3 1 - 0,019
mom ST 14-134.025 18 3 1 - 0,019
Pushbuttons for Standard Mounting 14
335
01.2000
1
4
recommended accessories:
dmushroom-head cap →346
dmarking plate for mushroom-head cap →346
dfront ring →347
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
marking see page 366
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
pushbutton with mushroom-head cap
switching system
contacts
switching action
connection method
40 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
pushbutton with mushroom-head cap LL 1NC main UT 14-476.036 13 7 2 1 0,015
mom UT 14-436.036 26 7 2 1 0,015
1NC + 1NO main UT 14-473.036 16 7 2 1 0,015
mom UT 14-433.036 29 7 2 1 0,015
1NO main UT 14-475.036 15 7 2 1 0,015
mom UT 14-435.036 28 7 2 1 0,015
2NC main UT 14-472.036 14 7 2 1 0,015
mom UT 14-432.036 27 7 2 1 0,015
2NO main UT 14-471.036 17 7 2 1 0,015
mom UT 14-431.036 30 7 2 1 0,015
SA 1NC + 1NO main ST/
PT 14-271.022 12 6 2 - 0,013
ST 14-271.025 12 6 2 - 0,013
mom ST/
PT 14-131.022 25 6 2 - 0,013
ST 14-131.025 25 6 2 - 0,013
2NC + 2NO main ST 14-272.025 9 6 2 - 0,015
mom ST 14-132.025 22 6 2 - 0,015
3NC + 3NO main ST 14-273.025 6 6 2 - 0,017
mom ST 14-133.025 19 6 2 - 0,017
4NC + 4NO main ST 14-274.025 5 6 2 - 0,019
mom ST 14-134.025 18 6 2 - 0,019
Pushbuttons for Standard Mounting 14
336
01.2000
recommended accessories:
dmushroom-head cap illuminated →346
dmarking plate for mushroom-head cap →346
dfront ring →347
dincandescent lamp →350; LED →350
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
marking see page 366
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
illuminated pushbutton with mushroom-head cap
switching system
contacts
diode (1N 4007)
switching action
connection method
40 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
illuminated pushbutton with mushroom-head cap LL 1NC - main UT 14-476.036 18 7 2 1 0,015
mom UT 14-436.036 19 7 2 1 0,015
1NC + 1NO - main UT 14-473.036 9 7 2 1 0,015
mom UT 14-433.036 12 7 2 1 0,015
1NO - main UT 14-475.036 22 7 2 1 0,015
mom UT 14-435.036 25 7 2 1 0,015
2NC - main UT 14-472.036 12 7 2 1 0,015
mom UT 14-432.036 25 7 2 1 0,015
2NO - main UT 14-471.036 5 7 2 1 0,015
mom UT 14-431.036 6 7 2 1 0,015
SA 1NC + 1NO - main ST/
PT 14-271.022 27 6 2 - 0,013
ST 14-271.025 26 6 2 - 0,013
mom ST/
PT 14-131.022 30 6 2 - 0,013
ST 14-131.025 28 6 2 - 0,013
1 main UT 14-747.029 10 8 2 1 0,014
mom UT 14-743.029 23 8 2 1 0,014
2 main UT 14-748.029 11 8 2 1 0,014
mom UT 14-744.029 24 8 2 1 0,014
2NC + 2NO - main ST 14-272.025 15 6 2 - 0,015
mom ST 14-132.025 27 6 2 - 0,015
1 main UT 14-749.029 7 8 2 1 0,016
mom UT 14-745.029 20 8 2 1 0,016
2 main UT 14-750.029 8 8 2 1 0,016
mom UT 14-746.029 21 8 2 1 0,016
3NC + 3NO - main ST 14-273.025 13 6 2 - 0,017
mom ST 14-133.025 17 6 2 - 0,017
4NC + 4NO - main ST 14-274.025 16 6 2 - 0,019
mom ST 14-134.025 14 6 2 - 0,019
Pushbuttons for Standard Mounting 14
337
01.2000
1
4
recommended accessories:
-
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
Keylock switches are supplied with 2 keys.
description see page 331
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
keylock switch 2 positions
switching system
contacts
switching action
connection method
key removable in 29 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
keylock switch 2 positions
pos. A: basic position
pos. C: maintaining position
standard lock 1001,
other lock numbers on request
LL 1NC + 1NO main UT A 14-415.036K 41 10 1 1 0,030
A+C 14-412.036K 41 10 1 1 0,030
C14-418.036K 41 10 1 1 0,030
2NO main UT A 14-414.036K 42 10 1 1 0,030
A+C 14-411.036K 42 10 1 1 0,030
C14-417.036K 42 10 1 1 0,030
SA 1NC + 1NO main ST/
PT A14-235.022K 37 9 1 - 0,029
A+C 14-135.022K 37 9 1 - 0,029
C14-335.022K 37 9 1 - 0,029
ST A 14-235.025K 37 9 1 - 0,029
A+C 14-135.025K 43 9 1 - 0,029
C14-335.025K 37 9 1 - 0,029
2NC + 2NO main ST A 14-236.025K 38 9 1 - 0,031
A+C 14-136.025K 38 9 1 - 0,031
C14-336.025K 38 9 1 - 0,031
3NC + 3NO main ST A 14-237.025K 39 9 1 - 0,033
A+C 14-137.025K 39 9 1 - 0,033
C14-337.025K 39 9 1 - 0,033
4NC + 4NO main ST A 14-238.025K 40 9 1 - 0,035
A+C 14-138.025K 40 9 1 - 0,035
C14-338.025K 40 9 1 - 0,035
pos. A: basic position
pos. C: momentary position
standard lock1001,
other lock numbers on request
LL 1NC + 1NO mom UT A 14-438.036K 35 10 1 1 0,030
2NO mom UT A 14-437.036K 36 10 1 1 0,030
SA 1NC + 1NO mom ST/
PT A14-141.022K 31 9 1 - 0,029
ST A 14-141.025K 31 9 1 - 0,029
2NC + 2NO mom ST A 14-142.025K 32 9 1 - 0,031
3NC + 3NO mom ST A 14-143.025K 33 9 1 - 0,033
4NC + 4NO mom ST A 14-144.025K 34 9 1 - 0,035
maint.
90˚
C
mom.
42˚
C
AA
Pushbuttons for Standard Mounting 14
338
01.2000
recommended accessories:
-
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
selector switch 2 positions
lever
switching system
contacts
switching action
connection method
29 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
selector switch 2 positions
pos. A: basic position long, black LL 1NC + 1NO main UT 14-572.0360 56 12 3 1 0,025
mom UT 14-567.0360 49 12 3 1 0,025
2NC main UT 14-571.0360 55 12 3 1 0,025
mom UT 14-566.0360 48 12 3 1 0,025
2NO main UT 14-570.0360 57 12 3 1 0,025
mom UT 14-565.0360 50 12 3 1 0,025
SA 1NC + 1NO main ST/
PT 14-556.0220 51 11 3 - 0,024
ST 14-556.0250 51 11 3 - 0,024
mom PT 14-551.0220 44 11 3 - 0,024
ST 14-551.0250 44 11 3 - 0,024
2NC + 2NO main ST 14-557.0250 52 11 3 - 0,026
mom ST 14-552.0250 45 11 3 - 0,026
3NC + 3NO main ST 14-558.0250 53 11 3 - 0,028
mom ST 14-553.0250 46 11 3 - 0,028
4NC + 4NO main ST 14-559.0250 54 11 3 - 0,030
mom ST 14-554.0250 47 11 3 - 0,030
short, black LL 1NC + 1NO main UT 14-522.0360 56 14 1 1 0,025
mom UT 14-517.0360 49 14 1 1 0,025
2NC main UT 14-521.0360 55 14 1 1 0,025
mom UT 14-516.0360 48 14 1 1 0,025
2NO main UT 14-520.0360 57 14 1 1 0,025
mom UT 14-515.0360 50 14 1 1 0,025
SA 1NC + 1NO main ST/
PT 14-506.0220 51 13 1 - 0,024
ST 14-506.0250 51 13 1 - 0,024
mom ST/
PT 14-501.0220 44 13 1 - 0,024
ST 14-501.0250 44 13 1 - 0,024
2NC + 2NO main ST 14-507.0250 52 13 1 - 0,026
mom ST 14-502.0250 45 13 1 - 0,026
3NC + 3NO main ST 14-508.0250 53 13 1 - 0,028
mom ST 14-503.0250 46 13 1 - 0,028
4NC + 4NO main ST 14-509.0250 54 13 1 - 0,030
mom ST 14-504.0250 47 13 1 - 0,030
maint.
90˚
C
mom.
42˚
C
AA
Pushbuttons for Standard Mounting 14
339
01.2000
1
4
recommended accessories:
-
connection method: ST = soldering terminal; PT = plug-in terminal; PCB plug-in base page 349
technical drawing as of page 355, mounting dimensions as of page 361, circuit drawing as of page 364
buzzer
operation voltage front cap
connection method
29 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
e
buzzer 24 VDC brass chromium-plated ST/
PT 14-810.902 58 15 1 0,016
plastic, black ST/
PT 14-810.002 58 15 1 0,016
Pushbuttons for Flush Mounting 14
340
01.2000
recommended accessories:
dlens plastic →345
dmarking foil for lens plastic/metal →346
dfront bezel-set for flush mounting →347
dincandescent lamp →350; LED →350
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
marking see page 366
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
indicator for flush mounting
connection method
35 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
indicator for flush mounting ST/
PT 14-040.002 2 16 4 - 0,050
ST 14-040.005 2 16 4 - 0,050
UT 14-041.006 2 16 4 1 0,050
Pushbuttons for Flush Mounting 14
341
01.2000
1
4
recommended accessories:
dlens plastic →345; lens metal →345
dmarking foil for lens plastic/metal →346
dlens raised, plastic →345
dmarking cap for lens raised plastic/metal →346
dfront bezel-set for flush mounting →347
dincandescent lamp →350; LED →350
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
description see page 331
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
illuminated-/pushbutton for flush mounting
switching system
contacts
diode (1N 4007)
switching action
connection method
35 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
illuminated-/pushbutton for flush mounting LL 1NC - main UT 14-476.036 13 18 4 1 0,015
mom UT 14-436.036 26 18 4 1 0,015
1NC + 1NO - main UT 14-473.036 16 18 4 1 0,015
mom UT 14-433.036 29 18 4 1 0,015
1NO - main UT 14-475.036 15 18 4 1 0,015
mom UT 14-435.036 28 18 4 1 0,015
2NC - main UT 14-472.036 14 18 4 1 0,015
mom UT 14-432.036 27 18 4 1 0,015
2NO - main UT 14-471.036 17 18 4 1 0,015
mom UT 14-431.036 30 18 4 1 0,015
SA 1NC + 1NO - main ST/
PT 14-271.022 12 18 4 - 0,013
ST 14-271.025 12 18 4 - 0,013
mom ST/
PT 14-131.022 25 18 4 - 0,013
ST 14-131.025 25 18 4 - 0,013
1mainUT 14-747.029 10 17 4 1 0,014
mom UT 14-743.029 23 17 4 1 0,014
2mainUT 14-748.029 11 17 4 1 0,014
mom UT 14-744.029 24 17 4 1 0,014
2NC + 2NO - main ST 14-272.025 9 18 4 - 0,015
mom ST 14-132.025 22 18 4 - 0,015
1mainUT 14-749.029 7 17 4 1 0,016
mom UT 14-745.029 20 17 4 1 0,016
2mainUT 14-750.029 8 17 4 1 0,016
mom UT 14-746.029 21 17 4 1 0,016
3NC + 3NO - main ST 14-273.025 6 18 4 - 0,017
mom ST 14-133.025 19 18 4 - 0,017
4NC + 4NO - main ST 14-274.025 5 18 4 - 0,019
mom ST 14-134.025 18 18 4 - 0,019
Pushbuttons for Flush Mounting 14
342
01.2000
recommended accessories:
dfront bezel-set for flush mounting →347
danti-twisting ring →352
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
description see page 331
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
keylock switch 2 positions for flush mounting
switching system
contacts
switching action
connection method
key removable in 35 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
keylock switch 2 positions for flush
mounting
pos. A: basic position
pos. C: maintaining position
standard lock 1001,
other lock numbers on request
LL 1NC + 1NO main UT A 14-415.036K 41 19 4 1 0,030
A+C 14-412.036K 41 19 4 1 0,030
C14-418.036K 41 19 4 1 0,030
2NO main UT A 14-414.036K 42 19 4 1 0,030
A+C 14-411.036K 42 19 4 1 0,030
C14-417.036K 42 19 4 1 0,030
SA 1NC + 1NO main ST/
PT A14-235.022K 37 19 4 - 0,029
A+C 14-135.022K 37 19 4 - 0,029
C14-335.022K 37 19 4 - 0,029
ST A 14-235.025K 37 19 4 - 0,029
A+C 14-135.025K 37 19 4 - 0,029
C14-335.025K 37 19 4 - 0,029
2NC + 2NO main ST A 14-236.025K 38 19 4 - 0,031
A+C 14-136.025K 38 19 4 - 0,031
C14-336.025K 38 19 4 - 0,031
3NC + 3NO main ST A 14-237.025K 39 19 4 - 0,033
A+C 14-137.025K 39 19 4 - 0,033
C14-337.025K 39 19 4 - 0,033
4NC + 4NO main ST A 14-238.025K 40 19 4 - 0,035
A+C 14-138.025K 40 19 4 - 0,035
C14-338.025K 40 19 4 - 0,035
pos. A: basic position
pos. C: momentary position
standard lock1001,
other lock numbers on request
LL 1NC + 1NO mom UT A 14-438.036K 35 19 4 1 0,030
2NO mom UT A 14-437.036K 36 19 4 1 0,030
SA 1NC + 1NO mom ST/
PT A14-141.022K 31 19 4 - 0,029
ST A 14-141.025K 31 19 4 - 0,029
2NC + 2NO mom ST A 14-142.025K 32 19 4 - 0,031
3NC + 3NO mom ST A 14-143.025K 33 19 4 - 0,033
4NC + 4NO mom ST A 14-144.025K 34 19 4 - 0,035
maint.
90˚
C
mom.
42˚
C
AA
Pushbuttons for Flush Mounting 14
343
01.2000
1
4
recommended accessories:
dfront bezel-set for flush mounting →347
danti-twisting ring →352
switching system: LL = Low Level switching element, SA = snap-action switching element
switching action: main = maintained action, mom = momentary action
connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349
contacts: NC = normally closed, NO = normally open
technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364
selector switch 2 positions for flush mounting
lever
switching system
contacts
switching action
connection method
35 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
components layout
e
selector switch 2 positions for flush mounting
pos. A: basic position short, black LL 1NC + 1NO main UT 14-522.0360 56 20 4 1 0,025
mom UT 14-517.0360 49 20 4 1 0,025
2NC main UT 14-521.0360 55 20 4 1 0,025
mom UT 14-516.0360 48 20 4 1 0,025
2NO main UT 14-520.0360 57 20 4 1 0,025
mom UT 14-515.0360 50 20 4 1 0,025
SA 1NC + 1NO main ST/
PT 14-506.0220 51 20 4 - 0,024
ST 14-506.0250 51 20 4 - 0,024
mom ST/
PT 14-501.0220 44 20 4 - 0,024
ST 14-501.0250 44 20 4 - 0,024
2NC + 2NO main ST 14-507.0250 52 20 4 - 0,026
mom ST 14-502.0250 45 20 4 - 0,026
3NC + 3NO main ST 14-508.0250 53 20 4 - 0,028
mom ST 14-503.0250 46 20 4 - 0,028
4NC + 4NO main ST 14-509.0250 54 20 4 - 0,030
mom ST 14-504.0250 47 20 4 - 0,030
maint.
90˚
C
mom.
42˚
C
AA
Pushbuttons for Flush Mounting 14
344
01.2000
recommended accessories:
-
connection method: ST = soldering terminal; PT = plug-in terminal; PCB plug-in base page 349
technical drawing as of page 355, mounting dimensions as of page 361, circuit drawing as of page 364
buzzer for flush mounting
operation voltage front cap
connection method
35 mm dia.
part no.
circuit drawing
technical drawing
mounting dimension
e
buzzer for flush mounting 24 VDC brass chromium-plated ST/
PT 14-810.918 58 21 4 0,016
plastic, black ST/
PT 14-810.910 58 21 4 0,016
Accessories 14
345
01.2000
1
4
for version IP 67 use marking plate 704.609.9
marking see page 366
for version IP 67 use marking cap 704.610.9
marking see page 366
for version IP 67 use marking plate 704.609.9
marking see page 366
for version IP 67 use marking plate 704.609.9
marking see page 366
at front
lens plastic
shape lens colour 29 mm dia.
part no. e
lens plastic flat opaque black 704.602.0 0,001
transparent blue 704.602.6 0,001
colourless, clear 704.602.7 0,001
green 704.602.5 0,001
red 704.602.2 0,001
yellow 704.602.4 0,001
lens raised, plastic
shape lens colour 29 mm dia.
part no. e
lens raised, plastic flat transparent colourless, clear 704.611.7 0,002
green 704.611.5 0,002
red 704.611.2 0,002
yellow 704.611.4 0,002
lens metal with window
shape lens colour 29 mm dia.
part no. e
lens metal with window flat aluminium anodized black 704.601.01 0,001
natural 704.601.81 0,001
stainless steel natural 704.601.91 0,001
lens metal
shape lens colour 29 mm dia.
part no. e
lens metal flat aluminium anodized black 704.601.0 0,001
blue 704.601.6 0,001
green 704.601.5 0,001
natural 704.601.8 0,001
red 704.601.2 0,001
yellow 704.601.4 0,001
stainless steel natural 704.601.9 0,001
Accessories 14
346
01.2000
for version IP 67 use marking cap 704.608.9
marking see page 366
for version IP 67 use marking plate 704.609.9
for version IP 67 use marking plate 704.609.9
lens cap for indicator full face illumination
lens cap colour 29 mm dia.
part no. e
lens cap for indicator full
face illumination transparent blue 704.603.6 0,003
colourless, clear 704.603.7 0,003
green 704.603.5 0,003
red 704.603.2 0,003
yellow 704.603.4 0,003
mushroom-head cap
mushroom colour 40 mm dia.
part no. e
mushroom-head cap opaque black 704.604.0 0,001
green 704-604.5 0,001
red 704.604.2 0,001
yellow 704.604.4 0,001
mushroom-head cap illuminated
mushroom colour 40 mm dia.
part no. e
mushroom-head cap illuminated transparent blue 704.614.6 0,007
clear 704.614.7 0,007
green 704.614.5 0,007
red 704.614.2 0,007
yellow 704.614.4 0,007
marking foil for lens plastic/metal
front shape marking plate colour part no. e
marking foil for lens plastic/
metal round opaque black 704.609.0 0,001
translucent white 704.609.9 0,001
translucent, ribbed, for neon
lamps colourless, clear 704.609.7 0,001
marking plate for mushroom-head cap
front shape marking plate colour part no. e
marking plate for mushroom-head cap round translucent white 704.609.9 0,001
marking cap for lens raised plastic/metal
front shape marking cap colour part no. e
marking cap for lens raised
plastic/metal round translucent, ribbed white 704.610.9 0,001
transparent, ribbed, for neon
lamps colourless, clear 704.610.7 0,001
Accessories 14
347
01.2000
1
4
mounting dimensions as of page 361
technical drawing as of page 355
marking cap for lens cap for indicator full face illumination
front shape marking cap colour part no. e
marking cap for lens cap
for indicator full face
illumination
round translucent, ribbed white 704.608.9 0,002
transparent, ribbed, for neon lamps colourless, clear 704.608.7 0,002
front ring
material colour 29 mm dia.
part no. e
front ring aluminium anodized black 704.600.1A 0,005
natural 704.600.1 0,005
plastic black 704.600.0 0,003
chromium-plated 704.600.4 0,003
light grey 704.600.6 0,003
stainless steel natural 704.600.9 0,006
front bezel-set for flush mounting
material colour 35 mm dia.
part no.
mounting dimension
e
front bezel-set for flush mounting aluminium anodized black 704.955.0 4 0,016
natural 704.955.1 4 0,016
stainless steel natural 704.955.9 4 0,016
legend plate
front dimension part no. e
legend plate
adhesive, aluminium anodized, natural, can also be
engraved
30 x 42 mm for 22.5 mm dia. mounting hole 704.962.0 0,002
42 x 42 mm for 22.5 mm dia. mounting hole 704.962.5 0,003
42 x 48 mm for 30.5 mm dia. mounting hole 704.962.6 0,004
48 x 48 mm for 22.5 mm dia. mounting hole 704.962.7 0,004
protective cover
29 mm dia.
part no.
technical drawing
e
protective cover
hinged, transparent, with means for sealing 704.925.0 22 0,007
Accessories 14
348
01.2000
mounting dimensions as of page 361
description as of page 331
protective cover for flush mounting
use 35 mm dia.
part no. e
protective cover for flush mounting
hinged, transparent, with means for sealing, aluminium anodi-
zed, natural
for pushbutton, selector switch 704.928.38 0,007
for pushbuttons 704.928.18 0,007
protective front ring
front ring part no. e
protective front ring
with transparent silicone membrane
temperature resistance: -25°C to +85°C
aluminium anodized 704.600.3 0,005
with transparent silicone membrane (to resist sea water)
temperature resistance: -25°C to +85°C brass, nickel plated 704.600.2 0,005
protective front ring for flush mounting
front ring part no. e
protective front ring for flush mounting
with transparent silicone membrane aluminium anodized, black 704.955.4 0,005
aluminium anodized, natural 704.955.3 0,005
blind plug
colour 28 mm dia.
part no.
mounting dimension
e
blind plug black 704.960.7 1 0,004
spare key
part no. e
spare key
for standard lock 1001, else on request 14-987.1001 0,006
Accessories 14
349
01.2000
1
4
components layouts as of page 362
at back
PCB plug-in base
for pin orientation part no.
components layout
e
PCB plug-in base
16.4 mm dia. x 9.8 mm high Low Level switching element axial 31-940 2 0,002
17,9 x 8,4 mm high
With the extendable mounting the di-
stance between PCB plug-in baseand
PCB can be varied up to 3mm.
Low Level switching element right-angled 31-941 3 0,004
17.8 mm dia. x 9.8 mm high snap-action switching element 2.8 mm axial 31-942 4 0,002
cable shoe
connection method part no. e
cable shoe plug-in terminal 2.8 x 0.5 mm 31-946 0,001
universal terminal 2.0 x 0.5 mm 31-945 0,001
insulation socket
part no. e
insulation socket
for connector 31-945 31-928 0,001
for connector 31-946 31-929 0,001
for snap-action switching element 2.8 mm
to cover the plug-in terminals 01-928 0,001
terminal cover
part no. e
terminal cover
for snap-action switching element 01-929 0,010
Accessories 14
350
01.2000
for lamp voltage reduction
Please keep to the country specific security rules.
for lamp voltage reduction
Wire in accordance with local electrical safety regulations.
for illumination
incandescent lamp
voltage/current part no. e
incandescent lamp
base T 5.5 6 AC/DC/200 mA 10-1106.1369 (01-903.0) 0,001
12 AC/DC/100 mA 10-1109.1329 (01-903.1) 0,001
12 AC/DC/50 mA 10-1109.1279 (01-913.12) 0,001
24 AC/DC/25 mA 10-1112.1199 (01-913.24) 0,001
24 AC/DC/50 mA 10-1112.1279 (01-903.2) 0,001
28 AC/DC/40 mA 10-1113.1249 (01-903.28) 0,001
30 AC/DC/40 mA 10-1114.1249 (01-903.3) 0,001
36 AC/DC/35 mA 10-1116.1229 (01-903.4) 0,001
48 AC/DC/25 mA 10-1119.1199 (01-903.5) 0,001
60 AC/DC/20 mA 10-1120.1179 (01-903.6) 0,001
LED
number of chips voltage/current colour part no. e
LED
base T 5.5 1 chip 12 VDC/14 mA white 10-2109.3139 0,001
24 VDC/14 mA white 10-2112.3139 0,001
28 VDC/14 mA white 10-2113.3139 0,001
6 chips 6 V/45 mA green 10-5106.3255 (01-968.05) 0,001
red 10-5106.3252 (01-968.02) 0,001
yellow 10-5106.3254 (01-968.04) 0,001
12 V/30 mA green 10-5109.3205 (01-968.15) 0,001
red 10-5109.3202 (01-968.12) 0,001
yellow 10-5109.3204 (01-968.14) 0,001
24 V/15 mA green 10-5112.3145 (01-968.25) 0,001
red 10-5112.3142 (01-968.22) 0,001
yellow 10-5112.3144 (01-968.24) 0,001
28 VDC/15 mA green 10-5113.3145 (01-968.35) 0,001
red 10-5113.3142 (01-968.32) 0,001
yellow 10-5113.3144 (01-968.34) 0,001
48 V/14 mA green 10-5119.3135 (01-968.45) 0,001
red 10-5119.3132 (01-968.42) 0,001
yellow 10-5119.3134 (01-968.44) 0,001
capacitor
value part no. e
capacitor
use with 60 VAC/20 mA, 50 Hz lamp voltage 230 VAC/0.27 µF02-917.0 0,004
series resistor
value part no. e
series resistor
use with 60 VAC/20 mA lamp rating 110 V/2.7 kOhm 02-904.0 0,003
125 V/3.3 kOhm 02-904.1 0,003
145 V/4.7 kOhm 02-904.3 0,003
230-240 V/10 kOhm 02-904.7 0,003
Accessories 14
351
01.2000
1
4
for fitting with series resistors and capacitors
Wire in accordance with local electrical safety regulations.
Wire in accordance with local electrical safety regulations.
mounting dimensions as of page 361
terminal plate empty
no. of spaces part no. e
terminal plate empty 5 spaces 02-912.1 0,025
10 spaces 02-912.2 0,045
15 spaces 02-912.3 0,090
20 spaces 02-912.4 0,095
terminal plate with capacitor
value no. of components part no. e
terminal plate with capacitor
use with 60 VAC/20 mA lamp rating 0.27 µF/230/60 V 5 spaces 02-914.10 0,045
10 spaces 02-914.20 0,090
15 spaces 02-914.30 0,135
20 spaces 02-914.40 0,180
terminal plate with series resistor
value no. of components part no. e
terminal plate with series resistor
use with 60 VAC/20 mA lamp rating 2.7 kOhm/110/60 V 5 spaces 02-913.10 0,040
10 spaces 02-913.20 0,075
15 spaces 02-913.30 0,115
20 spaces 02-913.40 0,155
3.3 kOhm/125/60 V 5 spaces 02-913.11 0,040
10 spaces 02-913.21 0,075
15 spaces 02-913.31 0,115
20 spaces 02-913.41 0,155
10 kOhm/230-240/60 V 5 spaces 02-913.17 0,040
10 spaces 02-913.27 0,075
15 spaces 02-913.37 0,115
20 spaces 02-913.47 0,155
assembling
positioning insert
part no.
mounting dimension
e
positioning insert 14-910 1 0,001
Accessories 14
352
01.2000
anti-twisting ring
part no. e
anti-twisting ring
for flush mounting 704.954.0 0,002
reducing ring
colour part no. e
reducing ring
for mounting of pushbutton 22.5 mm dia. in mounting hole 30.5 mm dia. black anodized 704.967.0 0,004
natural anodized 704.960.8 0,004
lens remover
part no. e
lens remover
for pushbuttons for flush mounting 700.006.0 0,003
lamp remover
part no. e
lamp remover 02-906 0,002
LED remover
part no. e
LED remover 51-996 0,024
Technical Data 14
353
01.2000
1
4
switching system
Self-cleaning, double-break, snap action switching system (with
contact gap 2 x 0.5 mm).
1 normally closed or 1 normally open contact per element.
snap-action switching elements with soldering terminals at the
sides: up to 4 switching element can be on a pushbutton (max. 4
normally closed and 4 normally open contacts).
snap-action switching element with axial plug-in terminals 2,8 mm
not stachable, only 1 switching element can be on a pushbutton.
material
actuator case
polyamide
material of contacts
gold-plated silver
switching element
plug-in-/soldering terminal
diallylphthalateDAP,polyamide66,polysulfone,heat-resistantand
self-extinguishing
soldering terminal: PA 6.6 Ultramid
mechanical characteristics
actuating force
3.5-5.5 N, depending on the number of switching elements
actuating torque
measured at the key or lever of the keylock- or selector switch: 2.5-
5.5 Ncm, depending on the number of switching elements
actuating travel
illuminated pushbutton :3 mm
switch actuator with 2 positions:
1 x ca. 42° deflection momentary action
1 x ca. 90° deflection maintained action
switch actuator with 3 positions:
2 x ca. 42° deflection momentary action
2 x ca. 90° deflection maintained action
ambient air temperature
-25°C to +55°C
for indicators and illuminated pushbuttons mounted as a block ,
make sure the heat can escape freely
(as per DIN IEC 68-)
connection method
snap-action switching element with tinned soldering terminals at
the sides:
max. wire diameter: 2 wires à 1.2 mm
max. wire cross-section of stranded cable: 1x 1 mm2.
snap-action switching element with axial plug-in terminals, which
can also be used as soldering terminals:
plug-in terminal: 2.8 x 0.5 mm
soldering terminal:
max. wire diameter: 2 wires of 1 mm
max. wire cross-section of stranded cable: 2 x 0.75 mm2or
1x1.0mm
2
degree of protection
front as per IEC 529: IP 67
mechanical life
momentary action 2 mio. cycles of operation
maintained action 1 mio. cycles of operation
actuator with snap-action switching element rebound time
<= 5ms
resistance to climate
standard condition as per IEC 68-2-3 and 2-30
changing condition as per IEC 68-2-14 and 2-33
resistance to shock
(single impacts, semi-sinusoidal)
15 g for 11 ms as per IEC 512-4-3, IEC 68-2-27
resistance to vibration
(sinussodial)
10 g at 10-2000 Hz, amplitude 1.5 mm as per IEC 68-2-6
storage temperature
-40°C to + 85°C
(as per DIN IEC 68-)
electrical characteristics
continuous thermal current lth2
5A
The maximum current in continuous operation and at ambient tem-
perature not exceeding the quoted maximum values.
electric strength
2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IC
512-2-11.
electrostatic breakdown value
<= 15 KV (keylock switch)
protection class
II
rated current
5A
rated insulation voltage
250 VAC/DC as per VDE 0110, group B
switch rating
250 VAC/5 A (cos ϕ1)
250 VAC/3 A (cos ϕ0.3)
switch rating AC, cos ϕ0,7:
voltage 125 V 250 V
current 3 A 2 A
switch rating DC (inductive), L:R = 30 ms:
voltage 24 V 60 V 110 V 220 V
current 2 A 0,7 A 0,2 A 0,1 A
volume resistance
starting value (initial) <= 50 mΩ
rules
EN 61 058
approvals
- SEV 250 VAC/5 A
- CSA 300 VAC
-UL
- German Lloyd
-ÖVE
-VDE
- Russian Marine Register
declaration of conformity
-CE
Technical Data 14
354
01.2000
switching system
This low level switching element was designed for switching low
powers in electronic circuits. The mechanism assures reliable
switching of loads ranging from a few µA/µVupto100mA/42VAC/
VDC.
Single-break momentary contact, as normally open or normally
closed with 4 independent points of contact. 2 momentary contacts
per switching element; combination of normallyopen and normally
closed is possible.
Special features are the long life, extremely short rebound time and
stable contact resistance.
material
actuator case
polyamide
material of contacts
gold-plated
switching element
polysulfone, heat-resistant and self-extinguishing
mechanical characteristics
actuating force
3-4 N
actuating torque
measured at the key or lever of the keylock- or selector switch: 2.5-
5.5 Ncm, depending on the number of switching elements
actuating travel
illuminated pushbutton :3 mm
switch actuator with 2 positions:
1 x ca. 42° deflection momentary action
1 x ca. 90° deflection maintained action
ambient air temperature
-25°C to +55°C
for indicators and illuminated pushbuttons mounted as a block ,
make sure the heat can escape freely
(as per DIN IEC 68-)
connection method
Theuniversalterminalspermittheseunitsto bemountedonprinted
circuit boards (PCB). These terminals can also be used as solder-
ing or plug-in terminals.
For these terminals we can also supply a plug-in base which, when
soldered on to the board, enables the switch to be plugged in.
soldering terminal:
max. wire diameter: 2 wires of 1 mm
max. wire cross-section of stranded cable: 2 x 0.75 mm2
plug-in terminal: 2.0 x 0.5 mm
degree of protection
front as per IEC 529: IP 67
mechanical life
momentary action 5 mio. cycles of operation
maintained action 1 mio. cycles of operation
rebound time
Typ. < 100 µs
resistance to shock
(single impacts, semi-sinusoidal)
15 g for 11 ms as per IEC 512-4-3, IEC 68-2-27
actuator with Low Level switching element storage temperature
-40°C to + 85°C
(as per DIN IEC 68-)
electrical characteristics
electric strength
2500 VAC, 50 Hz, 1 min. between all terminalsand earth, as per IC
512-2-11.
electrostatic breakdown value
<= 15 KV (keylock switch)
protection class
II
switch rating
10 µA/100 µV to 100 mA at 42 VAC/VDC
volume resistance
starting value (initial) <= 50 mΩ
buzzer system
system
Piezo disc
material
alarm buzzer case
polyamide
front cap
plastic: polyamide
metal: nickel-plated brass
sea-water proof
mechanical characteristics
ambient air temperature
-25°C to + 50°C
(as per DIN IEC 68-)
connection method
plug-in terminal 2.8 x 0.5 mm
degree of protection
IP 65 as per IEC 529
storage temperature
-25°C to + 50°C
(as per DIN IEC 68-)
electrical characteristics
frequency (tone)
ca.2.8 kHz continuous tone only
operation voltage/current
operation voltage: 24 VDC ± 10%
operation current: <= 25 mA
sound pressure
95 db (A) ± 8 at a distance of 0.1 m
buzzer
Technical Drawing, Dimension, Layout 14
355
01.2000
1
4
1 indicator front illumination, indicator full face illumination
page 333
2 indicator full face illumination
page 333
3 illuminated-/pushbutton front illumination
page 334
technical drawing
Technical Drawing, Dimension, Layout 14
356
01.2000
4 illuminated-/pushbutton front illumination
page 334
5 illuminated-/pushbutton front illumination
page 334
6 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap
page 335, 336
Technical Drawing, Dimension, Layout 14
357
01.2000
1
4
7 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap
page 335, 336
8 illuminated pushbutton with mushroom-head cap
page 336
9 keylock switch 2 positions
page 337
Technical Drawing, Dimension, Layout 14
358
01.2000
10 keylock switch 2 positions
page 337
11 selector switch 2 positions
page 338
12 selector switch 2 positions
page 338
Technical Drawing, Dimension, Layout 14
359
01.2000
1
4
13 selector switch 2 positions
page 338
14 selector switch 2 positions
page 338
15 buzzer
page 339
16 indicator for flush mounting
page 340
Technical Drawing, Dimension, Layout 14
360
01.2000
17 illuminated-/pushbutton for flush mounting
page 341
18 illuminated-/pushbutton for flush mounting
page 341
19 keylock switch 2 positions for flush mounting
page 341
Technical Drawing, Dimension, Layout 14
361
01.2000
1
4
20 selector switch 2 positions for flush mounting
page 343
21 buzzer for flush mounting
page 344
22 protective cover
page 347
1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton front illumination, keylock switch 2 positions, se-
lector switch 2 positions, buzzer, blind plug, positioning insert
page 333, 334, 337, 339, 338, 348, 351
mounting dimension
Technical Drawing, Dimension, Layout 14
362
01.2000
2 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap
page 335, 336
3 selector switch 2 positions
page 338
4 indicator for flush mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector
switch 2 positions for flush mounting, front bezel-set for flush mounting, buzzer for flush mounting
page 340, 341, 342, 343, 347, 344
1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton front illumination, pushbutton with mushroom-
head cap, illuminated pushbutton with mushroom-head cap, keylock switch 2 positions, selector switch 2 positions, indicator for flush
mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector switch 2 positions for
flush mounting
page 333, 334, 335, 336, 337, 338, 340, 341, 342, 343
components layouts
Technical Drawing, Dimension, Layout 14
363
01.2000
1
4
2 PCB plug-in base
page 349
3 PCB plug-in base
page 349
4 PCB plug-in base
page 349
Circuit Drawing 14
364
01.2000
circuit drawing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
circuit drawing
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
circuit drawing
Typical Applications 14
365
01.2000
1
4
With indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply
with a considerable saving of space.
Marking 14
366
01.2000
Indicator - Engraving of marking cap
All marking plates and marking caps are engraved in lettering to
DIN 1451, with black or white filling.
Can also be supplied with standard lettering or symbols.
For symbols see series 04.
Lettering to be engraved should be specified on a separate order
sheet.
(available from us on request.)
Height of letters
mm Number of lines Number of letters per line approx. Line spacing mm
b1 b2 b3
339974,6
4276-6,6
813- - -
Pushbutton/Illuminated pushbuttons - Engraving of marking
plate or raised marking cap
All marking plates and marking caps are engraved in lettering to
DIN 1451, with black or white filling.
Can also be supplied with standard lettering or symbols.
Lettering to be engraved should be specified on a separate order
sheet.
(available from us on request.)
Height of letters
mm Number of lines Number of letters per line approx. Line spacing mm
b1 b2 b3
3 3 11 10 9 4,6
4287-6,6
814- - -
Engraving of labels
All labels are engraved in lettering to DIN 1451, with black filling.
Lettering to be engraved should be specified on a separate order
sheet.
(available from us on request.)
Height of letters
mm Number of lines Number of letters per line approx. Line spacing mm
L = 30 mm L = 42 mm
3 2 14 20 4,5
4 1 10 14 4
81572
