BCM4413 FEATURES
BCM4100
SERIAL
EEPROM OPTIONAL
BOOT
ROM
STATUS
LEDs
CODEC DAA
FILTER
TRANSFORMER
FILTER
TRANSFORMER
PCI BUS
or
MSI BUS
25 MHz
10/100 Ethernet
iLine32
V.92
64 MHz
RJ-45
RJ-11
Phoneline
BCM4413
BCM4413 System Diagram
•Fully integrated iLine32 MAC/PHY, 10/100 Ethernet
MAC/PHY, and V.92 modem device for use in:
•PCI/Mini PCI adapters
•LAN on Motherboard
•Internet appliances and broadband gateways
•Voice over IP (VoIP) gateways
•Each interface operates concurrently as a separate
function, providing independent communication
channels.
•Represents the highest level of integration for
consumer Internet communications functions.
•Provides the lowest cost-per-communications function.
•Includes the speed-doubling feature of the HomePNA
2.0 standard to support a maximum line rate of
32 Mbps.
•PCI and microprocessor slave interface bus options
allow integration into virtually any system.
•WHQL certified drivers for Windows®98, Windows
ME, Windows 2000 and Windows XP for all three
functions.
•All drivers are portable for embedded operating
systems.
SUMMARY OF BENEFITS
BCM4413 PCI/MSI iLine32TM CONTROLLER
•Combination HomePNA 2.0, 10/100 Ethernet, and V.92
PCI/Mini PCI modem with fully concurrent operation
•PC99 WHQL certified drivers for Windows®98,
Windows Millennium Edition, Windows 2000, and
Windows XP.
•Meets PCI Advanced Power Management specification
version 1.1 (ACPI)
•HomePNA 2.0
•iLine32 speed-doubling mode (more than twice the data rate of
baseline iLine10 HomePNA 2.0 solution)
•iLine32 is fully compatible with iLine10 and HPNA 1.0
•Rate-adaptive line rate from 4 Mbps to 32 Mbps
•Low-latency real-time multimedia (DFPQ)
•10/100 Ethernet
•Complete 10/100 MAC/PHY and driver solution
•IEEE802.3u compliant transmit and receive engines
•Integrated MIB counters
•Low power 10BASE-T/100BASE-TX IEEE 802.3u Fast
Ethernet transceiver
•V.92 PCI modem
•High-performance V.92 software modem available
•On-chip serial interface to external DAA/codec
•Efficient (uses only 30 MHz x86 CPU capacity)
•2.5/3.3 V supply, 3/5 V PCI I/O
•196-pin FBGA package
PRODUCT
Brief
BCM4413
The Broadcom BCM4413 integrates HomePNA 2.0, 10/100
Ethernet MAC/PHY, and V.92 software modem interfaces,
enabling complete Internet communications connectivity. By
integrating all three functions, the BCM4413 dramatically
lowers the cost per function and allows ubiquitous high-speed
connection to cable, DSL, and fixed-wireless broadband pipes
throughout the home. This means that hundreds of dollars in
installation costs can be saved while carrying voice, video, and
data to each room in the house.
Home networking function: The BCM4413 high-speed
HomePNA 2.0 compliant home networking interface uses a
highly adaptive integrated Internet communications processor
that overcomes the wiring impairments on existing installed
home phonelines. The BCM4413 home networking function
operates on home telephone wiring without disturbing normal
phone or modem operation or other services like POTS, V.92,
ISDN, and ADSL. Broadcom’s iLine32 implementation of the
HomePNA 2.0 standard encompasses the required rate adaption
between 4 Mbps and 16 Mbps (iLine10) and the higher-speed 8
Mbps-32 Mbps (iLine32) line rates.
10/100 Ethernet function: The BCM4413 10/100 Ethernet
function incorporates a complete IEEE802.3u compliant MAC
and PHY. The MAC also supports management functions
including RMON, Ethernet-like MIB, and IEEE 802.3u Ethernet
MIB. The 10/100 PHY uses Broadcom’s advanced Mini-ΦTM
architecture for low power and includes Advanced Power
Management. The 10/100 PHY also supports auto-negotiation
and HP Auto-MDIX functions to eliminate installation errors.
V.92 modem function: The BCM4413 controller includes a
V.92 data/fax/voice modem interf ace to an e xternal serial modem
codec/DAA, allowing implementation of a complete, low-cost
V.92 data/fax/voice soft modem. The V.92 data/fax/voice
software modem driver is available for Windows®98, Windows®
ME, Windows®2000, and Windows®XP and can be ported to
virtually any processor and operating system combination.
Ordering Information
Part number: BCM4413 KPF
BCM4413 OVERVIEW
PCI
BUS
V.92 Modem
V.92
Modem
Interface
JTAG
BCM4100
10/100
Ethernet
iLine32
LEDs
Ethernet
LEDs
Serial EEPROM Boot ROM/
GPIO
PCI
BUS
Interface
TX
FIFO
TX
FIFO
TX
FIFO
RX
FIFO
RX
FIFO
RX
FIFO
Test
Interface
(for manufacturing
test only)
iLine32
MAC
iLine32
DSP
PHY
Ethernet
MAC Ethernet
PHY
PCI
Configuration
Registers SPROM
Interface
Boot ROM/
GPIO
Interface
LED
Interface
Phone: 949-450-8700
FAX: 949-450-8710
Email: info@broadcom.com
Web: www.broadcom.com
Broadcom®, the pulse logo®and Connecting EverythingTM are trademarks of
Broadcom Corporation and/or its subsidiaries in the United States and certain other countries.
All other trademarks are the property of their respective owners.
BROADCOM CORPORATION
16215 Alton Par kway, P.O. Box 57013
Irvine, California 92619-7013
© 2002 by BROADCOM CORPORATION. All rights reser ved.
4413-PB02-R-8.19.02
