DATA SHEET
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
WIDE BAND SPDT SWITCH
CMOS INTEGRATED CIRCUIT
+
PD5713TK
Document No. PU10627EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
DESCRIPTION
The
+
PD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed
for mobile communications, wireless communications and other general-purpose RF switching application.
This device can operate frequency from 0.05 to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density
surface mounting.
FEATURES
• Supply voltage : VDD = 1.8 to 3.6 V (2.8 V TYP.)
• Switch control voltage : Vcont (H) = 1.8 to 3.6 V (2.8 V TYP.)
V: cont (L) =<0.2 to +0.4 V (0 V TYP.)
• Low insertion loss : Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
L: ins2 = 0.8 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) =0V
L: ins3 = 0.95 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• High isolation : ISL1 = 32.5 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) =0V
V,zHG0.2ot0.1=f@.PYTBd52=2LSI: DD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) =0V
V,zHG5.2ot0.2=f@.PYTBd5.22=3LSI: DD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) =0V
• Handling power : Pin (1 dB) = +21.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) =0V
P: in (0.1 dB) = +17.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) =0V
• High-density surface mounting : 6-pin lead-less minimold package (1.5 =1.1 =0.55 mm)
APPLICATIONS
• Mobile communications
• Wireless communications
• Another general-purpose RF switching applications
ORDERING INFORMATION
Part Number Order Number Package Marking Supplying Form
+
PD5713TK-E2
+
PD5713TK-E2-A 6-pin lead-less minimold
(1511) (Pb-Free)
C3Q % Embossed tape 8 mm wide
% Pin 1, 6 face the perforation side of the tape
%Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order:
+
PD5713TK-A
The information in this document is subject to change without notice. Before using this document, please confirm
that this is the latest version.
Data Sheet PU10627EJ01V0DS
2
+
PD5713TK
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. Pin Name
1 OUTPUT1
2 GND
3 OUTPUT2
4Vcont
5 INPUT
(Top View)
1
2
43
5
6
C3Q
(Bottom View)
6
5
34
2
1
(Top View)
1
2
43
5
6
6VDD
TRUTH TABLE
Vcont INPUT<OUTPUT1 INPUT<OUTPUT2
Low OFF ON
High ON OFF
ABSOLUTE MAXIMUM RATINGS (TA=+25$C, unless otherwise specified)
Parameter Symbol Ratings Unit
VegatloVylppuS DD <0.5 to +4.6 V
Switch Control Voltage Vcont <0.5 to +4.6 V
Voltage Difference Vcont (H)
< VDD
+0.5 V
PrewoPtupnI in +23 dBm
Operating Ambient Temperature TA<45 to +85 $C
Storage Temperature Tstg <55 to +150 $C
RECOMMENDED OPERATING RANGE (TA=+25$C, unless otherwise specified)
Parameter Symbol MIN. TYP. MAX. Unit
VegatloVylppuS DD +1.8 +2.8 +3.6 V
Switch Control Voltage (H) Vcont (H) +1.8 +2.8 +3.6 V
Switch Control Voltage (L) Vcont (L) <0.2 0 +0.4 V
Remark VDD <0.4 V )Vcont (H) )VDD + 0.2 V
Data Sheet PU10627EJ01V0DS 3
+
PD5713TK
ELECTRICAL CHARACTERISTICS
(TA=+25$C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, DC cut capacitors = 1 000 pF, unless
otherwise specified)
Parameter Symbol Test Conditions MIN. TYP. MAX. Unit
L1ssoLnoitresnI ins1 f = 0.05 to 1.0 GHz <0.6 0.8 dB
L2ssoLnoitresnI ins2 f = 1.0 to 2.0 GHz <0.8 1.0 dB
L3ssoLnoitresnI ins3 f = 2.0 to 2.5 GHz <0.95 1.2 dB
5.2303zHG0.1ot50.0=f1LSI1noitalosI <dB
5222
zHG0.2ot0.1=f2LSI2noitalosI <dB
5.2202zHG5.2ot0.2=f3LSI3noitalosI <dB
LRssoLnruteRtupnI in 7131zHG5.2ot50.0=f <dB
Output Return Loss RLout 7131zHG5.2ot50.0=f <dB
0.1 dB Loss Compression Pin (0.1 dB) 0.71+0.31+zHG0.1=f <dBm
Input Power Note 1
1 dB Loss Compression Pin (1 dB) f = 1.0 GHz <+21.0 <dBm
Input Power Note 2
I
tnerruCylppuS DD VDD = Vcont = 2.8 V, RF off <0.01 1.0
+
A
Switch Control Current Icont VDD = Vcont = 2.8 V, RF off <0.01 1.0
+
A
Switch Control Speed tSW f = 1.0 GHz <30 100 ns
Notes 1. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
2. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
Caution It is necessary to use DC cut capacitors with this device.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system.
Data Sheet PU10627EJ01V0DS
4
+
PD5713TK
EVALUATION CIRCUIT
V
DD
V
cont
OUTPUT1 OUTPUT2
INPUT
1 000 pF1 000 pF
456
321
C0C0
C0
Remark C0 = 1 000 pF
Caution This IC has pull down resistance between RF line and GND, which fixes electric potential of RF line
to 0 V, then the IC cannot be used for DC switching.
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Data Sheet PU10627EJ01V0DS 5
+
PD5713TK
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
C5
C4
6pinL2MM SPDT SW
Vc2
Vc1
IN
OUT 2
OUT 1
C2
C2
V
cont
OUTPUT2
INPUT
OUTPUT1
V
DD
C3Q
C1
C2
C1
C1
C3
C1
USING THE NEC EVALUATION BOARD
Symbol Values
C1, C2, C3 1 000 pF
C4, C5 1 000 pF
Data Sheet PU10627EJ01V0DS
6
+
PD5713TK
TYPICAL CHARACTERISTICS
(TA=+25$C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, Pin = 0 dBm, DC cut capacitors = 1 000 pF,
unless otherwise specified)
2.5
2.0
1.0
1.5
0.5
0
–1.0
–1.5
–2.501.0 2.0 3.0
–0.5
–2.0
0.5 1.5 2.5
2
1
345
1: –0.584 dB
0.5 GHz
2: –0.659 dB
1.0 GHz
3: –0.730 dB
1.5 GHz
4: –0.811 dB
2.0 GHz
5: –0.924 dB
2.5 GHz
2.5
2.0
1.0
1.5
0.5
0
–1.0
–1.5
–2.501.0 2.0 3.0
–0.5
–2.0
0.5 1.5 2.5
2
1
345
1: –0.584 dB
0.5 GHz
2: –0.653 dB
1.0 GHz
3: –0.731 dB
1.5 GHz
4: –0.826 dB
2.0 GHz
5: –0.968 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1345
1: –38.2 dB
0.5 GHz
2: –31.7 dB
1.0 GHz
3: –27.4 dB
1.5 GHz
4: –23.9 dB
2.0 GHz
5: –22.4 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1345
1: –39.0 dB
0.5 GHz
2: –31.8 dB
1.0 GHz
3: –27.9 dB
1.5 GHz
4: –24.4 dB
2.0 GHz
5: –21.6 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
345
1: –26.0 dB
0.5 GHz
2: –21.5 dB
1.0 GHz
3: –19.5 dB
1.5 GHz
4: –18.3 dB
2.0 GHz
5: –18.9 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
34 5
1: –26.4 dB
0.5 GHz
2: –21.8 dB
1.0 GHz
3: –19.6 dB
1.5 GHz
4: –18.5 dB
2.0 GHz
5: –18.3 dB
2.5 GHz
INPUT–OUTPUT1
INSERSION LOSS vs. FREQUENCY
Insersion Loss Lins (dB)
Frequency f (GHz)
INPUT–OUTPUT2
INSERSION LOSS vs. FREQUENCY
Insersion Loss Lins (dB)
Frequency f (GHz)
Frequency f (MHz)
INPUT–OUTPUT1
ISOLATION vs. FREQUENCY
Isolation ISL (dB)
Frequency f (MHz)
INPUT–OUTPUT2
ISOLATION vs. FREQUENCY
Isolation ISL (dB)
Frequency f (MHz)
INPUT–OUTPUT1
INPUT RETURN LOSS vs. FREQUENCY
Input Return Loss RLin (dB)
Frequency f (MHz)
INPUT–OUTPUT2
INPUT RETURN LOSS vs. FREQUENCY
Input Return Loss RLin (dB)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10627EJ01V0DS 7
+
PD5713TK
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
345
1: –23.6 dB
0.5 GHz
2: –22.4 dB
1.0 GHz
3: –19.0 dB
1.5 GHz
4: –19.4 dB
2.0 GHz
5: –18.5 dB
2.5 GHz
+35
+30
+20
+25
+15
+10
+5
+5 +15 +25 +35
+10 +20 +30
f = 1 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
345
1: –24.4 dB
0.5 GHz
2: –22.9 dB
1.0 GHz
3: –20.0 dB
1.5 GHz
4: –20.6 dB
2.0 GHz
5: –19.4 dB
2.5 GHz
INPUT–OUTPUT1
OUTPUT RETURN LOSS vs. FREQUENCY
Output Return Loss RLout (dB)
Frequency f (MHz)
INPUT–OUTPUT2
OUTPUT RETURN LOSS vs. FREQUENCY
Output Return Loss RLout (dB)
Frequency f (MHz)
OUTPUT POWER vs. INPUT POWER
Output Power Pout (dBm)
Input Power Pin (dBm)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10627EJ01V0DS
8
+
PD5713TK
MOUNTING PAD DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
0.480.48
1.10
0.45
0.26
Remark The mounting pad layouts in this document are for reference only.
Data Sheet PU10627EJ01V0DS 9
+
PD5713TK
PACKAGE DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
0.48±0.05
0.48±0.05
1.5±0.1
1.3±0.05
1.1±0.1
0.55±0.03
0.11+0.1
–0.05 0.16±0.05
0.9±0.10.2±0.1
(Bottom View)
(Top View)
Data Sheet PU10627EJ01V0DS
10
+
PD5713TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
gniredloSdohteMgniredloS lobmySnoitidnoCsnoitidnoC
Infrared Reflow Peak temperature (package surface temperature) : 260$C or below
sselrosdnoces01:erutarepmetkaeptaemiT
Time at temperature of 220$C or higher : 60 seconds or less
Preheating time at 120 to 180$021:C (30 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
IR260
Wave Soldering Peak temperature (molten solder temperature) : 260$C or below
sselrosdnoces01:erutarepmetkaeptaemiT
Preheating temperature (package surface temperature) : 120$C or below
Maximum number of flow processes : 1 time
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
WS260
Partial Heating Peak temperature (terminal temperature) : 350$C or below
Soldering time (per side of device) : 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile:
(
408
)
988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A -AZ
Lead (Pb) < 1000 PPM Not Detected (*)
Mercury < 1000 PPM Not Detected
Cadmium < 100 PPM Not Detected
Hexavalent Chromium < 1000 PPM Not Detected
PBB < 1000 PPM Not Detected
PBDE < 1000 PPM Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
