FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7
September 2014
FOD8320
High Noise Immunity, 2.5A Output Current, Gate Drive
Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Features
■
Fairchild’s Optoplanar
®
Packaging Technology
Provides Reliable and High-Voltage Insulation with
Greater than 10 mm Creepage and Clearance
Distance, and 0.5 mm Internal Insulation Distance
While Still Offering a Compact Footprint
■
2.5 A Output Current Driving Capability for Medium-
Power IGBT/MOSFET
– P-Channel MOSFETs at Output Stage Enables
Output Voltage Swing Close to Supply Rail
■
35 kV/µs Minimum Common Mode Rejection
■
Wide Supply Voltage Range: 15 V to 30 V
■
Fast Switching Speed Over Full Operating
Temperature Range:
– 400 ns Maximum Propagation Delay
– 100 ns Maximum Pulse Width Distortion
■
Under-Voltage Lockout (UVLO) with Hysteresis
■
Extended Industrial Temperate Range: -40°C to 100°C
■
Safety and Regulatory Approvals:
– UL1577, 5,000 V
RMS
for 1 Minute
– DIN EN/IEC60747-5-5, 1,414 V Peak Working
Insulation Voltage
Applications
■
AC and Brushless DC Motor Drives
■
Industrial Inverter
■
Uninterruptible Power Supply
■
Induction Heating
■
Isolated IGBT/Power MOSFET Gate Drive
Related Resources
■
FOD3120, High Noise Immunity, 2.5 A Output
Current, Gate Drive Optocoupler Datasheet
■
www.fairchildsemi.com/products/opto/
Description
The FOD8320 is a 2.5 A output current gate drive
optocoupler, capable of driving medium-power IGBT/
MOSFETs. It is ideally suited for fast-switching driving of
power IGBT and MOSFET used in motor-control inverter
applications and high-performance power systems.
The FOD8320 utilizes Fairchild’s Optoplanar
®
coplanar
packaging technology and optimized IC design to
achieve reliable high-insulation voltage and high-noise
immunity.
It consists of an Aluminum Gallium Arsenide (AlGaAs)
Light-Emitting Diode (LED) optically coupled to an
integrated circuit with a high-speed driver for push-pull
MOSFET output stage. The device is housed in a wide
body, 5-pin, small-outline, plastic package.
Functional Schematic
Figure 1. Schematic
Figure 2. Package Outline
1
3
6
5
4
ANODE
CATHODE VSS
VO
VDD
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 2
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Truth Table
Pin Configuration
Figure 3. Pin Configuration
Pin Definitions
LED V
DD
– V
SS
“Positive Going”
(Turn-on)
V
DD
– V
SS
“Positive Going”
(Turn-off) V
O
Off 0 V to 30 V 0 V to 30 V LOW
On 0 V to 11.5 V 0 V to 10 V LOW
On 11.5 V to 14.5 V 10 V to 13 V Transition
On 14.5 V to 30 V 13 V to 30 V HIGH
Pin # Name Description
1 Anode LED Anode
3 Cathode LED Cathode
4V
SS
Negative Supply Voltage
5V
O
Output Voltage
6V
DD
Positive Supply Voltage
1
3
6
5
4
ANODE
CATHODE VSS
VO
VDD
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 3
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Safety and Insulation Ratings
As per DIN EN/IEC60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol Parameter Min. Typ. Max. Unit
Installation Classifications per DIN VDE 0110/1.89 Table 1
For Rated Mains Voltage < 150 V
RMS
I–IV
For Rated Mains Voltage < 300 V
RMS
I–IV
For Rated Mains Voltage < 450 V
RMS
I–IIII
For Rated Mains Voltage < 600 V
RMS
I–III
Climatic Classification 40/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
CTI Comparative Tracking Index 175
V
PR
Input-to-Output Test Voltage, Method b, V
IORM
x 1.875 = V
PR
,
100% Production Test with t
m
= 1 s, Partial Discharge < 5 pC 2651 V
peak
Input-to-Output Test Voltage, Method a, V
IORM
x 1.6 = V
PR
,
Type and Sample Test with t
m
= 10 s, Partial Discharge < 5 pC 2262 V
peak
V
IORM
Maximum Working Insulation Voltage 1414 V
peak
V
IOTM
Highest Allowable Over Voltage 8000 V
peak
External Creepage 10.0 mm
External Clearance 10.0 mm
Insulation Thickness 0.5 mm
Safety Limit Values – Maximum Values Allowed in the
Event of a Failure
T
S
Case Temperature 150 °C
I
S,INPUT
Input Current 200 mA
P
S,OUTPUT
Output Power 600 mW
R
IO
Insulation Resistance at T
S
, V
IO
= 500 V 10
9
Ω
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 4
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
T
A
= 25ºC unless otherwise specified.
Notes:
1. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%.
2.
No derating required across operating temperature range.
3.
Derate linearly from 25°C at a rate of 5.2 mW/°C
.
4.
Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected
to conditions outside these ratings.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol Parameter Value Units
T
STG
Storage Temperature
-40 to +125 °C
T
OPR
Operating Temperature
-40 to +100 °C
T
J
Junction Temperature
-40 to +125 °C
T
SOL
Lead Solder Temperature
Refer to Reflow Temperature Profile on page 15.
260 for 10 s °C
I
F(AVG)
Average Input Current
25 mA
F
Operating Frequency
50 kHz
V
R
Reverse Input Voltage
5.0 V
I
O(PEAK)
Peak Output Current
(1)
3.0 A
V
DD
Supply Voltage
0 to 35 V
V
O(PEAK)
Peak Output Voltage
0 to V
DD
V
t
R(IN)
, t
F(IN)
Input Signal Rise and Fall Time
500 ns
PD
I
Input Power Dissipation
(2)(4)
45 mW
PD
O
Output Power Dissipation
(3)(4)
500 mW
Symbol Parameter Min. Max. Unit
T
A
Ambient Operating Temperature
-40 100 °C
V
DD
– V
SS
Supply Voltage
16 30 V
I
F(ON)
Input Current (ON)
716mA
V
F(OFF)
Input Voltage (OFF)
0 0.8 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 5
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar
®
Wide Body SOP 5-Pin
Isolation Characteristics
Apply over all recommended conditions, typical value is measured at T
A
= 25ºC.
Notes:
5. Device is considered a two terminal device: pins 1 and 3 are shorted together and pins 4, 5 and 6 are shorted
together.
6. 5,000 VAC
RMS
for 1 minute duration is equivalent to 6,000 VAC
RMS
for 1 second duration.
Electrical Characteristics
Apply over all recommended conditions, typical value is measured at V
DD
= 30 V, V
SS
= Ground, T
A
= 25°C unless
otherwise specified.
Notes:
7. In this test, V
OH
is measured with a dc load current of 100 mA. When driving capacitive load V
OH
will approach V
DD
as I
OH
approaches 0 A.
8. Maximum pulse width = 1 ms, maximum duty cycle = 20%.
Symbol Parameter Conditions Min. Typ. Max. Units
V
ISO
Input-Output Isolation
Voltage
T
A
= 25ºC, R.H. < 50%, t = 60 s,
I
I-O
≤ 20 µA, 50 Hz(5)(6) 5,000 VRMS
RISO Isolation Resistance VI-O = 500 V(5) 1011 Ω
CISO Isolation Capacitance VI-O = 0 V, Frequency = 1.0 MHz(6) 1pF
Symbol Parameter Conditions Min. Typ. Max. Units Figure
VFInput Forward Voltage
IF = 10 mA
1.1 1.5 1.8 V 19
Δ(VF / TA)Temperature Coefficient of
Forward Voltage -1.8 mV/°C
BVR
Input Reverse Breakdown
Voltage IR = 10 µA 5 V
CIN Input Capacitance f = 1 MHz, VF = 0 V 60 pF
IOH
High Level Output
Current(1)
VOH = VDD – 3 V 1.0 2.0 2.5 A 4, 6
VOH = VDD – 6 V 2.0 2.5 A 4, 6, 22
IOL
Low Level Output
Current(1)
VOL = VSS + 3 V 1.0 2.0 2.5 A 7, 9
VOL = VSS + 6 V 2.0 2.5 A 7, 9, 21
VOH
High Level Output
Voltage(7)(8)
IF = 10 mA, IO = -2.5 A VDD – 6.25 VDD – 2.5 V 4
IF = 10 mA, IO = -100 mA VDD – 0.5 VDD – 0.1 4, 5, 23
VOL
Low Level Output
Voltage(7)(8)
IF = 10 mA, IO = 2.5 A VSS + 2.5 VSS + 6.25 V 7
IF = 0 mA, IO = 100 mA VSS + 0.1 VSS + 0.5 8, 24
IDDH High Level Supply Current VO Open, IF = 7 to 16 mA 2.9 3.8 mA 10, 11,
25
IDDL Low Level Supply Current VO Open, VF = 0 to 0.8 V 2.8 3.8 mA 10, 11,
26
IFLH
Threshold Input Current
Low to High IO = 0 mA, VO > 5 V 2.4 5.0 mA 12, 18,
27
VFHL
Threshold Input Voltage
High to Low IO = 0 mA, VO < 5 V 0.8 V 28
VUVLO+ UnderVoltage Lockout
Threshold
IF = 10 mA, VO > 5 V 11.5 12.7 14.5 V 20, 29
VUVLO- IF = 10 mA, VO < 5 V 10.0 11.2 13.0 V 20, 29
UVLOHYS
UnderVoltage Lockout
Threshold Hysteresis 1.5 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 6
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Switching Characteristics
Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = Ground, TA = 25°C unless
otherwise specified.
Notes:
9. Propagation delay tPHL is measured from the 50% level on the falling edge of the input pulse to the 50% level of the
falling edge of the VO signal.
10. Propagation delay tPLH is measured from the 50% level on the rising edge of the input pulse to the 50% level of the
rising edge of the VO signal.
11. PWD is defined as | tPHL – tPLH | for any given device.
12. The difference between tPHL and tPLH between any two FOD8320 parts under the same operating conditions, with
equal loads.
13. Common mode transient immunity at output high is the maximum tolerable negative dVcm/dt on the trailing edge of
the common mode impulse signal, VCM, to ensure that the output remains high (i.e., VO > 15.0 V).
14. Common mode transient immunity at output low is the maximum tolerable positive dVcm/dt on the leading edge of
the common pulse signal, VCM, to ensure that the output remains low (i.e., VO < 1.0 V).
Symbol Parameter Conditions Min. Typ. Max. Units Figure
tPHL
Propagation Delay Time to
Logic Low Output(9)
IF = 7 mA to 16 mA, Rg = 10 Ω,
Cg = 10 nF, f = 10 kHz,
Duty Cycle = 50%
150 285 400 ns
13, 14,
15, 16,
17, 30
tPLH
Propagation Delay Time to
Logic High Output(10) 150 260 400 ns
13, 14,
15, 16,
17, 30
PWD Pulse Width Distortion(11)
| tPHL – tPLH |25 100 ns
PDD
(Skew)
Propagation Delay Difference
Between Any Two Parts(12) -250 250
tR
Output Rise Time
(10% to 90%) 60 ns 30
tF
Output Fall Time
(90% to 10%) 60 ns 30
tULVO ON ULVO Turn On Delay IF = 10 mA, VO > 5 V 0.8 µs
tULVO OFF ULVO Turn Off Delay IF = 10 mA, VO < 5 V 0.4 µs
| CMH |Common Mode Transient
Immunity at Output High
TA = 25°C, VDD = 30 V,
IF = 7 mA to 16 mA,
VCM = 2000 V(13) 35 50 kV/µs 31
| CML |Common Mode Transient
Immunity at Output Low
TA = 25°C, VDD = 30 V, VF = 0 V,
VCM = 2000 V(14) 35 50 kV/µs 31
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 7
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Typical Performance Characteristics
IOH – OUTPUT HIGH CURRENT (A)
Figure 6. Output High Current
vs. Ambient Temperature
8
7
6
5
4
3
2
1
0
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VO = VDD – 6 V
VO = VDD – 3 V
VOL – OUTPUT LOW VOLTAGE (V)
0.25
0.20
0.15
0.10
0.05
0
Figure 8. Output Low Voltage
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VOH – VDD – OUTPUT HIGH VOLTAGE DROP (V)
0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
Figure 4. Output High Voltage Drop
vs. Output High Current
0 0.5 1.0 1.5 2.0 2.5
IOH – OUTPUT HIGH CURRENT (A)
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
f = 200 Hz 0.2% Duty Cycle
TA = -40°C
25°C
100°C
VOL – OUTPUT LOW VOLTAGE (V)
4
3
2
1
0
Figure 7. Output Low Voltage
vs. Output Low Current
0 0.5 1.0 1.5 2.0 2.5
IOL – OUTPUT LOW CURRENT (A)
-40°C
25°C
TA = 100°C
VOH–VDD – OUTPUT HIGH VOLTAGE DROP (V)
Figure 5. Output High Voltage Drop
vs. Ambient Temperature
0
-0.05
-0.10
-0.15
-0.20
-0.25
-0.30
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
IO = -100 mA
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
f = 200 Hz 0.2% Duty Cycle
VDD = 15 V to 30 V
VSS = 0 V
VF = 0 V or 0.8 V
IO = 100 mA
VDD = 15 V to 30 V
VSS = 0 V
IF = 0 mA
f = 200 Hz 99.8% Duty Cycle
IOL – OUTPUT LOW CURRENT (A)
8
6
4
2
0
Figure 9. Output Low Current
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 15 V to 30 V
VSS = 0 V
IF = 0 A
f = 200 Hz 99.8% Duty Cycle
VO = VSS + 6V
VO = VSS + 3V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 8
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Typical Performance Characteristics (Continued)
IDD – SUPPLY CURRENT (mA)
3.6
3.2
2.8
2.4
2.0
Figure 10. Supply Current
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 30 V
VSS = 0 V
IF = 10 mA (for IDDH)
IF = 0 mA (for IDDL)
IDDH
IDDL
IFLH – LOW TO HIGH INPUT CURRENT
THRESHOLD (mA)
4
3.5
3.0
2.5
2.0
1.5
1.0
Figure 12. Low to High Input Current Threshold
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
VDD = 15 V to 30 V
VSS = 0 V
Output = Open
IDD – SUPPLY CURRENT (mA)
3.6
3.2
2.8
2.4
2.0
Figure 11. Supply Current
vs. Supply Voltage
15 20 25 30
VDD – SUPPLY VOLTAGE (V)
IF = 10 mA (for IDDH)
IF = 0 mA (for IDDL)
VSS = 0 V
TA = 25°C
IDDH
IDDL
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 13. Propagation Delay
vs. Supply Voltage
15 18 21 24 27 30
VDD – SUPPLY VOLTAGE (V)
IF = 10 mA
Rg = 10 Ω
Cg = 10 nF
TA = 25°C
tPHL
tPLH
Figure 15. Propagation Delay
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
TA – AMBIENT TEMPERATURE (°C)
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 14. Propagation Delay
vs. LED Forward Current
6 8 10 12 14 16
IF – FORWARD LED CURRENT (mA)
tPHL tPHL
tPLH
tPLH
VDD = 30 V
VSS = 0 V
f = 10 kHz 50% Duty Cycle
Rg = 10 Ω
Cg = 10 nF
TA = 25°C
VDD = 30 V
VSS = 0 V
IF = 10 mA
f = 10 kHz 50% Duty Cycle
f = 10 kHz 50% Duty Cycle
Rg = 10 Ω
Cg = 10 nF
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 9
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Typical Performance Characteristics (Continued)
VO – OUTPUT VOLTAGE (V)
14
12
10
8
6
4
2
0
Figure 20. Under Voltage Lockout
0 5 10 15 20
VDD–VSS – SUPPLY VOLTAGE (V)
IF = 10 mA
TA = 25°C
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 16. Propagation Delay
vs. Series Load Resistance
0 1020304050
Rg – SERIES LOAD RESISTANCE (Ω)
tPLH
VDD = 30 V
VSS = 0 V
IF = 10 mA
f = 10 kHz 50% Duty Cycle
Cg = 10 nF
TA = 25°C
tPHL
tP – PROPAGATION DELAY (ns)
500
400
300
200
100
Figure 17. Propagation Delay
vs. Load Capacitance
0 20406080100
Cg – LOAD CAPACITANCE (nF)
tPLH
VDD = 30 V
VSS = 0 V
IF = 10 mA
f = 10 kHz 50% Duty Cycle
Rg = 10 Ω
TA = 25°C
tPHL
VO – OUTPUT VOLTAGE (V)
35
30
25
20
15
10
5
0
Figure 18. Transfer Characteristics
012345
IF – FORWARD LED CURRENT (mA)
VDD = 30 V
TA = 25°C
IF – FORWARD CURRENT (mA)
100
10
1
0.1
0.01
0.001
Figure 19. Input Forward Current
vs. Forward Voltage
0.6 0.8 1.0 1.2 1.4 1.6 1.8
VF – FORWARD VOLTAGE (V)
100°C25°C-40°C
VUVLO = 11.56 V VUVLO = 13.12 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 10
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit
Figure 21. IOL Test Circuit
Figure 22. IOH Test Circuit
+
+
Power Supply
VDD = 15 V to 30 V
Power Supply
V = 6 V
IOL
PW = 4.99 ms
Period = 5 ms
ROUT = 50 Ω
R2
100 Ω
Frequency = 200 Hz
Duty Cycle = 99.8%
VDD = 15 V to 30 V
VSS = 0 V
IF = 0 mA
C1
0.1 μF
Pulse-In
LED-IFmon
Pulse Generator
Test Conditions:
To Scope
VOL
R1
100 Ω
C2
47 μF
+
C3
0.1 μF
D1 C4
47 μF
+
1
3
6
5
4
PW = 10 μs
Period = 5 ms
ROUT = 50 Ω
R2
100 Ω
Frequency = 200 Hz
Duty Cycle = 0.2%
VDD = 15 V to 30 V
VSS = 0 V
IF = 7 mA to 16 mA
C1
0.1 μF
Pulse-In
LED-IFmon
Pulse Generator
Test Conditions:
Power Supply
VDD = 15 V to 30 V
+
+
–
Power Supply
V = 6 V
To Scope
VOH
R1
100 Ω
C2
47 μF
+
C3
0.1 μF
D1
Current
Probe
IOH
C4
47 μF
+
1
3
6
5
4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 11
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 23. VOH Test Circuit
Figure 24. VOL Test Circuit
IF = 7 mA to 16 mA VO
0.1 μF
100 mA
VDD = 15 V to 30 V
+
–
1
3
6
5
4
VO
0.1 μF100 mA
VDD = 15 V to 30 V
+
–
1
3
6
5
4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 12
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 25. IDDH Test Circuit
Figure 26. IDDL Test Circuit
1
3
6
5
4
IF = 7 mA to 16 mA VO
0.1 μF
VDD = 30 V
+
–
1
3
6
5
4
VF = -3.0 V to 0.8 V VO
0.1 μFVDD = 30 V
+
–
+
–
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 13
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 27. IFLH Test Circuit
Figure 28. VFHL Test Circuit
Figure 29. UVLO Test Circuit
1
3
6
5
4
VO > 5 V
0.1 μF
IF
VDD = 15 V to 30 V
+
–
1
3
6
5
4
VF = –3.0 V to 0.8 V VO
0.1 μF
VDD = 15 V to 30 V
+
–
+
–
1
3
6
5
4
VO = 5 V
0.1 μF
15 V or 30 V
VDD Ramp
+
–
IF = 10 mA
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 14
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Test Circuit (Continued)
Figure 30. tPHL, tPLH, tR and tF Test Circuit and Waveforms
Figure 31. CMR Test Circuit and Waveforms
VO
Probe
f = 10 kHz
DC = 50%
IF
VOUT
tPLH
Cg = 10 nF
Rg = 10 Ω
50 Ω
0.1 μF
VDD = 15 V to 30 V
+
–
+
–
tRtF
90%
50%
10%
tPHL
1
3
6
5
4
A
B
VO
0.1 μF
VDD = 30 V
VCM = 2,000 V
IF
+
–
5 V +
–
Δt
VCM
VO
Switch at A: IF = 10 mA
Switch at B: IF = 0 mA
VOH
VOVOL
0V
+ –
1
3
6
5
4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 15
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Reflow Profile
Figure 32. Reflow Profile
Profile Freature Pb-Free Assembly Profile
Temperature Minimum (Tsmin) 150°C
Temperature Maximum (Tsmax) 200°C
Time (tS) from (Tsmin to Tsmax) 60 s to 120 s
Ramp-up Rate (tL to tP) 3°C/second maximum
Liquidous Temperature (TL) 217°C
Time (tL) Maintained Above (TL) 60 s to 150 s
Peak Body Package Temperature 260°C +0°C / –5°C
Time (tP) within 5°C of 260°C 30 s
Ramp-Down Rate (TP to TL) 6°C/s maximum
Time 25°C to Peak Temperature 8 minutes maximum
Time (seconds)
Temperature (°C)
Time 25°C to Peak
260
240
220
200
180
160
140
120
100
80
60
40
20
0
TL
ts
tL
tP
TP
Tsmax
Tsmin
120
Preheat Area
Maximum Ramp-up Rate = 3°C/s
Maximum Ramp-down Rate = 6°C/s
240 360
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD8320 Rev. 1.0.7 16
FOD8320 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler in Optoplanar® Wide Body SOP 5-Pin
Ordering Information
All packages are lead free per JEDEC: J-STD-020B standard.
Marking Information
Part Number Package Packing Method
FOD8320 Wide Body SOP 5-Pin Tube (100 units per tube)
FOD8320R2 Wide Body SOP 5-Pin Tape and Reel (1,000 units per reel)
FOD8320V Wide Body SOP 5-Pin, DIN EN/IEC60747-5-5 Option Tube (100 units per tube)
FOD8320R2V Wide Body SOP 5-Pin, DIN EN/ IEC60747-5-5 Option Tape and Reel (1,000 units per reel)
1
2
8
4
3
5
Definitions
1 Fairchild logo
2 Device number, e.g., ‘8320’ for FOD8320
3 DIN EN/IEC60747-5-5 Option (only appears on
component ordered with this option)
4 Plant code, e.g., ‘D’
5 Last digit year code, e.g., ‘C’ for 2012
6 Two digit work week ranging from ‘01’ to ‘53’
7 Lot traceability code
8 Package assembly code, W
8320
D X YY KK
V
67
W
LAND PATTERN
RECOMMENDATION
NOTES: UNLESS O T HERWISE SPECIFIED
A) THIS PACKAGE DOES NOT
CONF ORM TO A NY STANDARD.
B) ALL DIMENSIONS ARE IN
MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS
D) DRAWING CONFORMS TO ASME
Y14.5M-1994
E) DRAWING FILE NAME:
MKT-M05AREV3
SCALE: 3.2:1
9.20
1.27 3.95
PIN ONE
INDICATOR
A
1.35
1.15
0.25 0.74
0.44
13
64
11.38
A
B
C
0.20 CA-B
2X
13
64
4.60
0.10 C D
2X
2.54
5X 0.51
0.31
0.25 CA-B D
11.80
11.60
D
0.60
0.33 C
5 TIPS
2.65
2.45
2.95 MAX
0.30
0.10
0.10 CSEATING
PLANE
0.10 C
5X
GAUGE
PLANE
SEATING
PLANE
C
0.25
0.19
(R1.29)
(R0.54)
1.27
1.38
8°
0°
2.54
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following inclu des registered and unregistered tra demarks and service marks, ow ned by Fairch ild Semico nductor and /or its gl obal subsidiaries, and is not
intended to be an exhaustiv e list of all such trademarks.
AccuPower
AttitudeEngine™
Awinda
®
AX-CAP
®
*
BitSiC
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL
Current Transfer Logic
DEUXPEED
®
Dual Cool™
EcoSPARK
®
EfficientMax
ESBC
Fairchild
®
Fairchild Semiconductor
®
FACT Quiet Series
FACT
®
FastvCore
FETBench
FPS
F-PFS
FRFET
®
Global Power Resource
SM
GreenBridge
Green FPS
Green FPS e-Serie s
Gmax
GTO
IntelliMAX
ISOPLANAR
Making Small Speakers Sound Louder
and Better™
MegaBuck
MICROCOUPLER
MicroFET
MicroPak
MicroPak2
MillerDrive
MotionMax
MotionGrid
®
MTi
®
MTx
®
MVN
®
mWSaver
®
OptoHiT
OPTOLOGIC
®
OPTOPLANAR
®
®
Power Supply WebDesigner
PowerTrench
®
PowerXS™
Programmable Active Droop
QFET
®
QS
Quiet Series
RapidConfigure
Saving our world, 1mW/W/kW at a time™
SignalWise
SmartMax
SMART START
Solutions for Your Success
SPM
®
STEALTH
SuperFET
®
SuperSOT-3
SuperSOT-6
SuperSOT-8
SupreMOS
®
SyncFET
Sync-Lock™
®*
TinyBoost
®
TinyBuck
®
TinyCalc
TinyLogic
®
TINYOPTO
TinyPower
TinyPWM
TinyWire
TranSiC
TriFault Detect
TRUECURRENT
®
*
SerDes
UHC
®
Ultra FRFET
UniFET
VCX
VisualMax
VoltagePlus
XS™
Xsens™
仙童
®
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR
WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT AS SUM E ANY LI ABILIT Y ARIS ING OU T OF THE AP PLICAT ION OR USE OF
ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT C ONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF
OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE
WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
AUTHORIZED USE
Unless otherw ise speci fied in this da ta sh eet, this pr oduct is a stand ard commercial produ ct and is not intended for use in appl ication s that require extraordi nary
levels of qual ity and reliabili ty. This product may no t be used in the fo llowing app lications, un less spe cifically approv ed in w riting by a Fairchild offi cer: (1) au tomotiv e
or other tran sportati on, (2) m ilitary /aerospace, ( 3) any safety critical application – including life cri tical medi cal equipmen t – w here the failure of the F airchild produc t
reasonably would be expected to result in per sonal injury, dea th or property damag e. Customer’s use of this product is subje ct to agreement of this Authorized Use
policy. In the ev ent of an unauth orized use of Fair child’s p roduct, Fairch ild ac cepts no li ability in the event o f produc t failure. In other respects, this product shall be
subject to Fairchild’ s Worldwide Terms and Co nditions of Sale, unle ss a separa te agreement h as been signed by both Par ties.
ANTI-COUNTERFEITING POLICY
Fairchild Semico nductor Cor poration's An ti-Counter feiting Poli cy. Fairchi ld's Anti-Co unterfeiting Poli cy is also stated on our external websit e, www .fairchild semi.com,
under Terms of Use
Counterfeiting of semiconductor parts is a growing pro blem in the indu stry. All m anufactur ers of sem iconductor products a re ex periencing cou nterfeiting o f their
parts. Customers w ho inadverten tly purchase coun terfeit par ts experien ce many pr oblems such as lo ss of bra nd reputa tion, su bstandard per formance, failed
applications, and incr eased cost o f productio n and man ufacturing delays. Fairchild is taking strong mea sures to protect oursel v es and our cu stomers from the
proliferatio n of counterfeit parts. F airchild stron gly encourage s customers to pur chase Fairchild parts eith er directly from Fairchild or fr om Authorized Fair child
Distributors w ho are l isted by cou ntry on o ur web pag e cited ab ove. Produ cts customers b uy either from Fair child directly or from A uthorized Fair child Distributor s
are genuine par ts, hav e full tr aceability , meet Fairchild' s quality standards for hand ling and sto rage and prov ide access to Fa irch ild's fu ll range of up-to-da te techn ical
and product informati on. Fairchil d and o ur Author ized Distributo rs will stan d behind all warran ties and will a ppropriately address any warranty issues that may a rise.
Fairchild will not prov ide any w arranty cov erage or other assi stance fo r parts bough t from Una uthorized S ources. F airchild is c ommitted to com bat this global
problem and encourage our customers to do th eir part in stopping this p ractice by bu ying direct or from au thorized distributo rs.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I77
®
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Fairchild Semiconductor:
FOD8320V FOD8320 FOD8320R2V FOD8320R2