GENERAL-USE RECTIFIER DIODE V06 OUTLINE DRAWING V06C (200V) V06E (400V) V06G (600V) V06J (800V) 29MIN. (1.14) Color of cathode band Type 0.8 (0.03) 5MAX (0.2) 62MIN. (2.44) 29MIN. (1.14) Direction of polarity Unit in mm(inch) Cathode band * For general purpose. * Diffused-junction. Glass passivated and encapsulated. 3.5 MAX (0.14) FEATURES Black Blue Red Green Weight: 0.35 (g) ABSOLUTE MAXIMUM RATINGS Item Type V06C V06E V06G V06J Repetitive Peak Reverse Voltage VRRM V 200 400 600 800 Non-Repetitive Peak Reverse Voltage VRSM V 300 500 800 1000 Average Forward Current IF(AV) A Surge(Non-Repetitive) Forward Current IFSM A 35 ( Without PIV, 10ms conduction, Tj = 175C start ) I2t Limit Value I2t A2s 4.9 ( Time = 2 ~ 10ms, I = RMS value ) Operating Junction Temperature Tj C -65 ~ +175 Tstg C -65 ~ +200 Storage Temperature Notes 1.1 half sine wave 180 conduction (Single-phase ) TL = 90C, Lead length = 10mm (1) Lead Mounting : Lead Temperature 300C max. to 3.2mm from body for 5sec. Max.. (2) Mechanical Strength : Bending 90x2 cycles or 180x1 cycle, Tensile 2kg, Twist 90x1 cycle. CHARACTERISTICS(TL=25C) Item Symbols Units Min. Peak Reverse Current IRRM A - Peak Forward Voltage VFM V trr Rth(j-a) Reverse Recovery Time Steady State Thermal Impedance Rth(j-l) Typ. Max. Test Conditions 1.5 20 C class 0.6 10 E,G,J class - - 1.4 IFM=1.1Ap, Single-phase half sine wave 1 cycle s - 3.0 - IF=2mA, VR=-15V C/W - - 80 50 Rated VRRM Lead length = 10 mm PDE-V06-0 V06 Max. average forward power dissipation (Resistive or inductive load) MAX. AVERAGE FORWARD POWER DISSIPATION (W) Forward characteristic 100 PEAK FORWARD CURRENT (A) Single-phase half sine wave Conduction : 10ms 1 cycle TL = 175 C 10 TL = 25 C 1.0 0.1 0 1 2 3 4 5 6 7 2.4 DC 2.0 1.6 Single-phase(50Hz) 1.2 0.8 0.4 0 0 PEAK FORWARD VOLTAGE DROP (V) 180 1.2 1.6 2.0 180 Single-phase half sine wave 180 conduction (50Hz) 160 140 L = 10mm 20mm 25mm 120 100 80 60 L L 40 20 PC board (100x180x1.6t) Copper foil ( 5.5) 0 0.2 0.4 0.6 0.8 1.0 L = 10mm 20mm 25mm 140 120 100 80 60 L L 40 Lead temp 20 0 1.2 Single-phase half sine wave 180 conduction (50Hz) 160 0 AVERAGE FORWARD CURRENT (A) PC board (100x180x1.6t) Copper foil ( 5.5) 0.2 0.4 0.6 0.8 1.0 1.2 AVERAGE FORWARD CURRENT (A) Surge forward current characteristic (Non-repetitive) Typ. reverse current vs. junction temperature 500 50 Surge current peak value Note : at VRRM 10ms 40 100 1 cycle REVERSE CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 0.8 Max. allowable lead temperature (Resistive or inductive load) MAX. ALLOWABLE LEAD TEMPERATURE (C) MAX. ALLOWABLE AMBIENT TEMPERATURE (C) Max. allowable ambient temperature (Resistive or inductive load) 0 0.4 AVERAGE FORWARD CURRENT (A) 30 Without PIV 20 With PIV CLASS : C 10 CLASS : E,G,J 1 10 01 10 CYCLES 100 0.1 0 50 100 150 200 JUNCTION TEMPERATURE (C) PDE-V06-0 V06 Steady state thermal impedance Transient thermal impedance 200 TRANSIENT THERMAL IMPEDANCE (C/W) 120 Rth(j - a) 100 80 Rth(j - l) 60 Ambient temp. measured point Lead temp. Lead measured poin length (0.5 thermocouple) 2 Copper foil ( 5.5) 40 15 20 STEADY STATE THERMAL IMPEDANCE (C/W) 140 20 PC board (100x180x1.6t) Lead length 0 0 10 20 30 Lead length = 10 mm Rth(j - a) 100 Rth(j - l) 10 1 Note : PC. board mounted PC. board( 100 x 180 x 1.6t) Copper foil ( 5.5 ) 0.1 0.001 0.01 0.1 1 10 100 TIME (s) LEAD LENGTH (mm) Reverse recovery time(trr) test circuit 50F - 15V 22s D.U.T 2mA 15V 0 600 t 0.1Irp Irp trr PDE-V06-0 HITACHI POWER SEMICONDUCTORS Notices 1.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are adviced to contact Hitachi sales department for the latest version of this data sheets. 2.Please be sure to read "Precautions for Safe Use and Notices" in the individual brochure before use. 3.In cases where extremely high reliability is required(such as use in nuclear power control, aerospace and aviation, traffic equipment, life-support-related medical equipment, fuel control equipment and various kinds of safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. Or consult Hitachi's sales department staff. 4.In no event shall Hitachi be liable for any damages that may result from an accident or any other cause during operation of the user's units according to this data sheets. Hitachi assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in this data sheets. 5.In no event shall Hitachi be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 6.No license is granted by this data sheets under any patents or other rights of any third party or Hitachi, Ltd. 7.This data sheets may not be reproduced or duplicated, in any form, in whole or in part , without the expressed written permission of Hitachi, Ltd. 8.The products (technologies) described in this data sheets are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety not are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. For inquiries relating to the products, please contact nearest overseas representatives which is located "Inquiry" portion on the top page of a home page. Hitachi power semiconductor home page address http://www.hitachi.co.jp/pse