NPN-Si-Fototransistor mit V Charakteristik Silicon NPN Phototransistor with V Characteristics Lead (Pb) Free Product - RoHS Compliant SFH 3310 Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 350 nm bis 970 nm * Angepasst an die Augenempfindlichkeit (V) * Especially suitable for applications from 350 nm to 970 nm * Adapted to human eye sensitivity (V) Anwendungen Applications * * * * * * * * Umgebungslicht-Detektor Beleuchtungsmesser Dimmungssensor fur Hintergrundbeleuchtung Messen/Steuern/Regeln" Ambient light detector Exposure meter for daylight and artificial light Sensor for Backlight-Dimming For control and drive circuits Typ Type Bestellnummer Ordering Code Fotostrom , Ee= 10W/cm2, = 560nm, VCE = 5 V Photocurrent Ipce (A) SFH 3310 Q65110A5343 2.5...8.0 2007-05-29 1 SFH 3310 Grenzwerte (TA = 25 C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Kollektor-Emitterspannung Collector-emitter voltage VCE 5.5 V Kollektorstrom Collector current IC 20 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 0.5 V Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity Smax 570 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 350 ... 970 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 0.29 mm2 Abmessung der Chipflache Dimensions of chip area LxB LxW 0.75 x 0.75 mm x mm Halbwinkel Half angle 75 Grad. deg. Kapazitat, VCE = 0 V, f = 1 MHz, E = 0 Capacitance CCE 16 pF Dunkelstrom Dark current VR = 5 V ICEO 3 (< 50) nA Kennwerte (TA = 25 C) Characteristics 2007-05-29 2 SFH 3310 Bezeichnung Parameter Symbol Symbol Wert Value -2 Fotostrom Photocurrent Ee= 10W/cm2, = 560nm, VCE = 5 V Ev = 1000lx, Normlicht/Standard light A Kollektor-Emitter-Sattigungsspannung Collector-emitter saturation voltage IC = IPCEmin1) x 0.3, Ee= 10W/cm2, = 560nm -3 IPCE 2.5...5.0 290 4.0...8.0 460 A A VCEsat 100 100 mV 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe 1) IPCEmin is the min. photocurrent of the specified group Directional Characteristics Srel = f () 2007-05-29 Einheit Unit 3 SFH 3310 Relative Spectral Sensitivity Srel = f () OHF00851 100 Photocurrent IPCE = f (EV), VCE = 5 V OHF00852 1000 3.5 I PCE 80 4.0 pF A % Srel Collector-Emitter Capacitance CCE = f (VCE) CCE 3.0 70 100 2.5 60 2.0 50 V 40 1.5 10 30 1.0 20 0.5 10 1 1 0 400 500 600 700 800 900 nm 1100 OHF00854 80 I CE lx 1000 EV OHF01024 1.8 I PCE I PCE (25 C) 200 lx 70 100 Photocurrent IPCE/IPCE(25 C) = f (TA) Ev = 1000 lx, VCE = 1 V ... 5 V Collector-Emitter Current ICE = f (VCE; EV) A 10 1.4 60 1.2 50 1.0 40 100 lx 0.8 30 0.6 20 0.4 10 0 0.2 20 lx 0 1 2 3 4 V 5 0 -50 -30 -10 10 VCE 2007-05-29 30 50 C 90 TA 4 0.0 1E-03 1E-02 1E-01 1E+00 1E+01 VCE 1E+02 V SFH 3310 Mazeichnung Package Outlines 0.7 (0.028) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) 3.5 (0.138) 29 (1.142) 27 (1.063) 4.5 (0.177) 4.1 (0.161) o2.9 (0.114) 1.8 (0.071) 1.2 (0.047) 0.6 (0.024) 0.4 (0.016) o3.1 (0.122) 2.54 (0.100) spacing Emitter Area not flat 3.1 (0.122) 2.5 (0.098) 2.0 (0.079) 1.7 (0.067) Chip position 4.0 (0.157) 3.6 (0.142) GEOY6446 Mae in mm (inch) / Dimensions in mm (inch). Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-05-29 5 s 25 SFH 3310 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-05-29 6