Part
L (µH)
RDC IDC Part
L (µH)
RDC IDC
Number (Ω)(A) Number (Ω)(A)
AIUR-15 Max Max AIUR-15 Max Max
220M 22 0.030 5.7 181K 180 0.130 2.5
270M 27 0.033 5.0 221K 220 0.160 2.3
330K 33 0.038 4.8 271K 270 0.190 2.0
390K 39 0.038 4.5 331K 330 0.260 1.8
470K 470 0.044 4.2 391K 390 0.290 1.7
560K 56 0.048 4.0 471K 470 0.330 1.5
680K 68 0.055 3.8 561K 560 0.410 1.4
820K 82 0.066 3.5 681K 680 0.460 1.3
101K 100 0.082 3.2 821K 820 0.630 1.1
121K 120 0.098 3.0 102K 1000 0.710 1.0
151K 150 0.110 2.7
0.22Max
5,5
Ø0.040
Ø1,00
0.79Max
20,0
1.10Min
28,0
0.394
10,00
0.12Min
3,0
0.71Max
18,0
0.365Max
9,27
0.275Max
6,99
0.138
3,50
0.375
9,53
Ø0.025
Ø0,64
0.625
15,88
Part
L (µH)
RDC IDC Part
L (mH)
RDC IDC Part
L (µH)
RDC IDC
Number (Ω)(A) Number (Ω)(A) Number (Ω)(A)
AIUR-16 Max Max AIUR-16 Max Max AIUR-16 Max Max
3R9K 3.9 0.020 2.70 820K 82 0.240 0.580 182K 1.8 5.7 0.125
4R7K 4.7 0.022 2.50 101K 100 0.270 0.530 222K 2.2 6.2 0.115
5R6K 5.6 0.027 2.30 121K 120 0.310 0.460 272K 2.7 7.6 0.105
6R8K 6.8 0.029 2.10 151K 150 0.372 0.440 332K 3.3 8.5 0.096
8R2K 8.2 0.036 1.90 181K 180 0.456 0.390 392K 3.9 10.3 0.084
100K 10 0.041 1.70 221K 220 0.535 0.350 472K 4.7 11.3 0.076
120K 12 0.046 1.55 271K 270 0.625 0.320 562K 5.6 13 0.070
150K 15 0.050 1.40 331K 330 0.816 0.300 682K 6.8 17 0.064
180K 18 0.062 1.30 391K 390 1.0 0.280 822K 8.2 20 0.057
220K 22 0.071 1.20 471K 470 1.2 0.240 103K 10 27 0.053
270K 27 0.073 1.10 561K 560 1.3 0.225 123K 12 31 0.047
330K 33 0.090 0.92 681K 680 1.8 0.210 153K 15 45 0.043
390K 39 0.102 0.84 821K 820 2.1 0.190 183K 18 51 0.038
470K 47 0.120 0.76 102K 1000 3.0 0.165 223K 22 60 0.035
560K 56 0.162 0.70 122K 1200 3.3 0.155 273K 27 66 0.033
680K 68 0.186 0.66 152K 1500 3.5 0.135 333K 33 100 0.029
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
THRU-HOLE POWER INDUCTORS
THRU-HOLE POWER INDUCTORS
THRU-HOLE POWER INDUCTORS
AIUR-15, AIUR-16 SERIES
|||||||||||||||
STANDARD SPECIFICATIONS:
PHYSICAL CHARACTERISTICS:
PHYSICAL CHARACTERISTICS:
TECHNICAL INFORMATION:
TECHNICAL INFORMATION:
• Test frequency: 1KHz, 0.1VRMS
• Inductance tolerance: M=20%, K=10%
• IDC: Inductance drops 10% typical or, ∆T ≤ 40°C with rated IDC
• Letter suffix indicates standard tolerance
• Test frequency: 10KHz 0.1VRMS
• Tolerance: K=10% (Standard)
• Letter suffix indicates standard tolerance
• Temperature: -40°C to +125°C with no load -40°C to +85°C with full rated current
• Marking: Value and tolerance
• IDC: 5% typical Lp drops from initial value
• UL Shrink Tube
Note: Where wires exits over flange to lead termination add 0.050" total
to max diameter. Check SCD for detail E&M specification
• Operating Temperature: -40°C to +85°C
• Storage Temperature: -55°C to +125°C
• Marking: Inductance and tolerance
** No Tubing
OPTIONS:
• Bulk Pack is standard
APPLICATIONS:
• Electronic Appliance
• Noise Filtering
FEATURES:
• Ferrite core with heat shrink tube
• High Reliability
rev1.1-8/04
