Automation Products
Cable Protection System
for Automation Applications
2 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 3
Automation Products
Introduction
PMA Cable Protection System for Automation applications.
This PMA Cable Protection System has been conceived to
protect cables and wires in extreme automation and robotic
installations. Through different conduit types for various
requirements, system supports and a range of special ac-
cessories, torsion can be avoided and the stresses upon
the cables reduced to a minimum.
PMA Automation Products
|
ABB-KAT.13 E / 7TCA292000R7459
4 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
Automation Products
Introduction
General technical details
Material
– Specially formulated polyamide 6
– Free from halogens, REACH + RoHS compliant
– Temperature range: –40 °C to +105 °C,
short term to +160 °C
Characteristics
– Reduce wear to guidance and control elements
– Increase the degree of freedom of robotic installations
– Allow optimal layout of cables along moving elements
– Increase the lifetime of moving installations
– Allow quick and easy installation
Automation accessories
■ Tube clamp with ball
joint termination
■ Tube clamp with slide half-shells
and abrasion protection sleeve
■ Tube clamp with strain
relief half-shells
■ Tube clamp with ball
joint sleeve
■ Tube clamp with
gliding bush
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 5
Automation Products
Overview of conduits for Automation/movable systems
XR90 PIS/PIH ESD PUE POS
Material
Material PA12 PA12 PA12 PUR PP
Special feature 3-layer conduit flame retarded antistatic
Free from halogens,
REACH + RoHS compliant
yes yes yes yes yes
Temperature range
–40 °C …+95 °C
continuous
–40 °C …+95 °C
continuous
–40 °C …+95 °C
continuous
–60 °C …+50 °C
continuous
–25 °C …+95 °C
continuous
Characteristics
Fatigue/reversed bending
Multiaxial movements –
Abrasion resistance
Application areas
Automation
Robotics
Features
with wear
indicator
UL 94 V0 electrostatically
discharging
for tight bending
radii
inexpensive
Key
very high
low
recommended
suitable
Stat. radius = Lowest recommended bending
radius for static (fixed) installation
Dyn. radius = Lowest recommended bending
radius for dynamic (flexible) installation
Fine profile T
Tight bending radius
Coarse profile G
High pull-out strength
6 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
Automation Products
Conduits
PIS/PIH
Highly flexible, medium- and heavy-duty
– For robotics and automation applications
– UL 94 V0
XR90
Three layer corrugated conduit, very flexible, medium-duty
– For robotics and automation applications
– With wear indicator (three different colours)
PIS/PIH
XR90
– Specially formulated polyamide 12
– Very good resistance to reversed bending
– Temperature range: –50 °C to +95 °C,
short-term to +150 °C
– Outer, intermediate and inner layer made
from specially formulated polyamide 12
–
Very good chafing resistance
– Excellent resistance to continuous
bending
– No abrupt conduit failure due to high tear
propagation resistance
– Temperature range: –40 °C to +95 °C,
short-term to +150 °C
Order No.
black
Conduit size
NW metric
Inside
[
Outside
[
Stat./Dyn.
radius
PU
meter
PIST-29B 29 32 29.0 mm 34.3 mm 45/110 mm 50
PIST-36B 36 40 36.5 mm 42.5 mm 60/165 mm 30
PIST-48B 48 50 47. 5 mm 54.5 mm 70/180 mm 30
PIHG-56B 56 68 56.3 mm 67. 2 mm 110/270 mm 30
PIHG-70B 70 80 67.2 mm 79.6 mm 150/350 mm 30
Approvals
Order No.
black
Conduit size
NW metric
Inside
[
Outside
[
Stat./Dyn.
radius
PU
meter
XR90G-29BR 29 32 29.1 mm 34.3 mm 45/110 mm 50
XR90G-36BR 36 40 36.8 mm 42.2 mm 60/165 mm 30
XR90G-48BR 48 50 47.3 mm 54.2 mm 70/200 mm 30
XR90G-56BR 56 68 56.3 mm 67. 3 mm 110/270 mm 30
XR90G-70BR 70 80 6 7.4 mm 79.8 mm 150/350 mm 30
Products in this brochure are based on
a size range from NW29–NW70. Many
of the individual products described
here are available also in other sizes.
Please refer to our PMA main catalogue
on www.pma.ch.
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 7
Automation Products
Conduits
ESD
Very flexible, medium-duty
– For dynamic applications in robotics and automation where electrostatic charge
and uncontrolled discharge need to be avoided
Order No.
black
Conduit size
NW metric
Inside
[
Outside
[
Stat./Dyn.
radius
PU
meter
ESDT-29B 29 32 29.0 mm 34.3 mm 55/110 mm 50
ESDT-36B 36 40 36.5 mm 42.5 mm 60/160 mm 30
ESDT-48B 48 50 47. 5 m m 54.5 mm 70/200 mm 30
ESDG-56B 56 68 56.5 mm 67. 0 m m 110/250 mm 30
ESDG-70B 70 80 67.5 mm 80.0 mm 150/330 mm 10
ESD
– Specially formulated polyamide 12
– Prevents electrostatic charging
– High dynamic load resistance
– Temperature range: –40 °C to +90 °C,
short-term to +150 °C
PUE
Highly flexible, medium-duty
– For robotic applications with multi-axial movements
– Specially suitable for tight bending-radii
PUE
– Specially formulated polyurethane
– Highest reversed bending resistance
– Excellent chafing characteristics
– Temperature range: –60 °C to +50 °C
Order No.
black
Conduit size
NW metric
Inside
[
Outside
[
Stat./Dyn.
radius
PU
meter
PUET-29B 29 32 28.8 mm 34.5 mm 40/90 mm 30
PUET-36B 36 40 35.8 mm 42.4 mm 50/120 mm 30
PUET-48B 48 50 48.6 mm 54.5 mm 60/130 mm 21
PUEG-56B 56 68 56.3 mm 67. 2 mm 90/170 mm 30
PUEG-70B 70 80 68.2 mm 80.5 mm 100/220 mm 30
POS
Highly flexible, medium-duty
– For automation as well as for machine building and industrial installations,
especially where continuous movements occur
POS
Order No.
black
Conduit size
NW metric
Inside
[
Outside
[
Stat./Dyn.
radius
PU
meter
POST-29B 29 32 29.0 mm 34.5 mm 50/120 mm 50
POST-36B 36 40 36.5 mm 42.5 mm 60/180 mm 30
POST-48B 48 50 47.5 mm 54.5 mm 70/195 mm 30
POSG-70B 70 80 67.2 mm 79.6 mm 150/350 mm 30
8 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
Automation Products
Automation accessories
SH
Tube clamp, one-piece
– To be used with GN half-shells to optimally fix/guide conduits
– Serves as a fixation for functional inserts (TK, KE) which increase the degrees of freedom
for cable packs and reduce mechanical stresses
GN
Strain relief half-shell
– For conduit fixation in combination with tube clamp SH
– Fixes conduit against axial movements
– Allows for rotation of the conduit (within tube clamp SH)
SH
GN
Order No.
black
Fits with half-shell GN
Fine Profile Coarse Profile Slide
Fits to conduit size
NW metric Length Height Width
BSH-R29 BGN-S29T BGN-S29G BGN-R29 29 32 71.0 mm 67. 0 m m 26.0 mm
BSH-R36 BGN-S36T BGN-S36G BGN-R36 36 40 81.5 mm 7 7.5 mm 26.0 mm
BSH-R48 BGN-S48T BGN-S48G BGN-R48 48 50 96.0 mm 91.0 mm 26.0 mm
BSH-R56 –BGN-S56G BGN-R56 56 68 112.5 mm 103.5 mm 30.0 mm
BSH-R70 –BGN-R70G BGN-R70 70 80 149.0 mm 144.0 mm 40.0 mm
Order No.
black Fits with
Fits to conduit size
NW metric
Outside
[ Width
BGN-R29 BSH-R29 29 32 47.0 mm 34.0 mm
BGN-R36 BSH-R36 36 40 55.0 mm 36.0 mm
BGN-R48 BSH-R48 48 50 66.5 mm 36.5 mm
BGN-R56 BSH-R56 56 68 81.0 mm 38.0 mm
BGN-R70 BSH-R70 70 80 105.0 mm 45.0 mm
Order No. black
Fine Profile Coarse Profile Fits with
Fits to conduit size
NW metric
Outside
[ Width
BGN-S29T BGN-S29G BSH-R29 29 32 47.0 mm 34.0 mm
BGN-S36T BGN-S36G BSH-R36 36 40 55.0 mm 34.0 mm
BGN-S48T BGN-S48G BSH-R48 48 50 66.5 mm 36.5 mm
–BGN-S56G BSH-R56 56 68 81.0 mm 38.0 mm
–BGN-R70G BSH-R70 70 80 105.0 mm 45.0 mm
–BGN-S70G BLH-R70G 70 80 93.5 mm 38.0 mm
– Content of delivery:
Tube clamp, 1 PT screw, 1 straight pin
GN
Slide half-shell
– Insert in combination with tube clamp SH
– Allows gliding of the conduit in the clamps and thus reduce axial stress on the conduit
– Allow for both rotation of the conduit and axial movement
GN
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 9
Automation Products
Automation accessories
KS
Grommet
– For arrangement and strain relief of a loom of hoses and leads of given dimensions in cable assemblies
– To be fixed in GS-R70 grommet half-shell or directly inserted into KE-R70G
KS
Order No.
black
Fits to conduit size
NW metric
Outside
[ Width
BGS-R70 70 80 105.0 mm 45.0 mm
Order No.
black
Fits to conduit size
NW
Inside
[
Outside
[ Width
BKS-R70/00 70 17.5 mm 81.5 mm 35.0 mm
BKS-R70/01 70 28.0 mm 81.5 mm 35.0 mm
BKS-R70/02 70 13.2 mm 81.5 mm 35.0 mm
BKS-R70/03 70 17.5 mm 81.5 mm 35.0 mm
BKS-R70/04 70 17.5 mm 81.5 mm 30.0 mm
BKS-R70/05 70 28.0 mm 81.5 mm 30.0 mm
GS
Grommet half-shell
– Insert to the SH-R70 tube clamp to hold a grommet (KS-R70/xx)
GS
– Special polymeric material
– Free from halogens and cadmium
Order No.
black Fits to
Fits to conduit size
NW metric
Conduit
profile
Outside [
Width
BGN-R56G/70G BTR-R70G 70–56 80–68 G80.0 mm / 35.0 mm
BKE-R70G
GN
Strain relief half-shell reduction
– For reduction to the next smaller conduit size
– In combination with ball joint parts NW70
GN
10 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
Automation Products
Automation accessories
TK
Ball joint sleeve
– Used within SH-R70 tube clamp
– Increased degree of freedom for cable packs in robotic applications
– The ball joint offers additional flexibility and reduces mechanical stress on the conduit
– Can be used with TR strain relief insert to fix the conduit in axial direction
KE
Ball joint termination
– Used in the SH-R70 tube clamp
– Offers highest flexibility at the end of the installation
– Provides additional relief to conduit and cables due to reduced mechanical stress
– A grommet can be inserted directly into this termination to hold and strain-relief the cables
TR
Strain relief insert
– Used to fix the conduit against axial movements in TK ball joint sleeves
– Rotation of the conduit remains possible
TK
KE
TR
– Content of delivery:
Ball joint sleeve, 4 PT screws
– Content of delivery:
Ball joint termination, 4 PT screws
Order No.
black
Fits to conduit size
NW metric
PT
screws
Outside
[ Length
BTK-R70 70 80 KA 50x20 122.0 mm 140.0 mm
Order No.
black
Fits to conduit size
NW metric
PT
screws
Outside
[ Length
BKE-R70G 70 80 KA 50x20 122.0 mm 128.0 mm
Order No.
black
Fits to conduit size
NW metric
Outside
[ Length
BTR-R70G 70 80 92.0 mm 25.0 mm
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 11
Automation Products
Automation accessories
SS/SV
Abrasion protection sleeve
– Abrasion protection for corrugated conduits in positions exposed to chafing
– Excellent chafing characteristics
LH
DKLK
SS/SV
– Black anodised aluminium
– Robust construction, sealed high quality
bearing with minimal play
– Temperature range: –50 °C to +105 °C
– Content of delivery:
Swivel Base, 1 hexagon socket head
cap screw
Order No.
black
Fits to conduit size
NW metric
Outside
[ Width
BSS-29 29 32 55.0 mm 26.0 mm
BSS-36 36 40 63.0 mm 30.0 mm
BSS-48 48 50 75.0 mm 30.0 mm
BSS-56G 56 68 90.0 mm 33.0 mm
BSV-70G 70 80 108.0 mm 60.0 mm
LH
Tube clamp, two-pieces
– In automation applications for fixing PMA conduits
– Compact, space saving design
DKLK
Heavy-duty swivel base
– For SH + LH tube clamps
– Allows rotation of cable pack supports
Order No.
black
Including
half-shell GN
Fits to conduit size
NW metric
Conduit
profile Length Height Width
BLH-R56G BGN-S56G/70G 56 68 G121.0 mm 128.0 mm 30.0 mm
BLH-R70G BGN-S70G 70 80 G121.0 mm 128.0 mm 30.0 mm
Order No.
black
Fits to
tube clamp Length Height Width
DKLK-R56X56 BSH-R29/BSH-R48 56.0 mm 56.0 mm 21.5 mm
DKLK-R100X80 BSH-R70 100.0 mm 80.0 20.0 mm
DKLK-R100X80/01 BSH-R29/BSH-R48 100.0 mm 80.0 mm 23.0 mm
– Allows optimum installations in automa-
tion applications due to space saving
design
– Content of delivery:
Tube clamp, GN half shells, 2 PT screws,
1 straight pin
– Content of delivery:
Abrasion protection sleeves with assembling screws
12 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
Automation Products
Automation accessories
GG
Flange straight
– Ingress protection: IP50 without conduit seal ring (IP65 with conduit seal ring)
GG
Order No.
black
Order No.
grey
Fits to conduit size
NW Width Height Depth
BGG-56 SGG-56 56 82.0 mm 9 7.0 mm 42.0 mm
BGG-70 SGG-70 70 97. 0 m m 114.0 mm 48.0 mm
– Flange seal FGO4 made from EPDM
– Flange seal FGO4/01 made from NBR
– Temperature range with FGO4:
–40 °C to +105 °C
– Temperature range with FGO4/01:
–25 °C to +70 °C
– Content of delivery: Flange part, fixation
clamps (incl. 2 screws), flange seal
(FGO4 or FGO4/01), conduit seal ring
(optional for IP65)
Approvals
AS
Conduit support sleeve
– Conduit support sleeve for PMA conduit type PUE to increase the system pull-out strength
ES
Internal conduit sleeve support
– Conduit support sleeve for PMA conduits type PUE and PIH to increase the system pull-out strength
AS
ES
Order No.
black
Fits to conduit size
NW metric
Conduit
profile
Inside
[
Outside
[ Length
BAS-29T 29 32 T30.0 mm 30.0 mm 34.0 mm
BAS-36T 36 40 T38.0 mm 38.0 mm 47.0 mm
BAS-48T 48 50 T50.0 mm 50.0 mm 47.0 mm
Order No.
black
Fits to conduit size
NW metric
Conduit
profile
Inside
[
Outside
[ Length
BES-70G 70 80 G63.0 mm 80.0 mm 23.0 mm
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 13
Automation Products
Automation accessories
GO
Flange 90° elbow
– Ingress protection: IP50 without conduit seal ring (IP65 with conduit seal ring)
GO
Order No.
black
Order No.
grey
Fits to conduit size
NW Width Height Depth
BGO-56 SGO-56 56 82.0 mm 97.0 mm 101.0 mm
BGO-70 SGO-70 70 97.0 mm 114.0 mm 115.0 mm
– Flange seal FGO4 made from EPDM
– Flange seal FGO4/01 made from NBR
– Temperature range with FGO4:
–40 °C to +105 °C
– Temperature range with FGO4/01:
–25 °C to +70 °C
– Content of delivery: Flange part, fixation
clamps (incl. 2 screws), flange seal
(FGO4 or FGO4/01), conduit seal ring
(optional for IP65)
Approvals
GH
SGS
GH
Tube clamp, one-piece
– For general machine and installation applications
SGS
Tube clamp
– For fixation of static conduits
Order No.
black
Order No.
grey
Fits to conduit size
NW metric Width
Fixing
screws
BGH-23 SGH-23 23 25 16.0 mm 2 x M5
BGH-29 SGH-29 29 32 19.0 mm 2 x M6
BGH-36 SGH-36 36 40 24.0 mm 2 x M6
BGH-48 SGH-48 48 50 24.0 mm 2 x M6
Order No.
black
Fits to conduit size
NW Width Height Depth
SGS-36 36 80.0 mm 48.0 mm 19.0 mm
SGS-48 48 94.0 mm 58.0 mm 19.0 mm
SGS-56 56 118.0 mm 72.0 mm 24.0 mm
SGS-70 70 130.0 mm 85.0 mm 24.0 mm
– Integrated rib provides axial strain relief
– Allows turning of the conduit thus
avoiding torsion stresses
– Pre-fixation on the conduit possible
– Allows solid fixation with 2 screws
– Galvanized steel
– Elastomer profile (EPDM) free from
halogens
– Smooth connection to PMA conduits
– Good resistance to ozone and ageing
– Temperature range: –40 °C to +120 °C
14 ABB-KAT.13 E / 7TCA292000R7459 | PMA Automation Products
Automation Products
Possible combinations
* Replace with “T” to order fi ne profi le or “G” to order coarse profi le
Tube clamp and half-shell
Tube clamp Half-shells Swivel base
Slide half-shells Strain relief half-shells
BSH BGN BGN DKLK
Conduit size Tube clamp Slide half-shell Strain relief half-shell Swivel base
29 BSH-R29 BGN-R29 BGN-S29* DKLK-R56x56
36 BSH-R36 BGN-R36 BGN-S36* DKLK-R56x56
48 BSH-R48 BGN-R48 BGN-S48* DKLK-R56x56
56 BSH-R56 BGN-R56 BGN-S56 DKLK-R100x80
70 BSH-R70 BGN-R70 BGN-R70G DKLK-R100x80
BSH + BGN BSH + BGN BSH + DKLK
Tube clamp and ball joint sleeve
BSH BTK BTK + BTR + (BGN) DKLK
Conduit size Tube clamp Slide half-shell Strain relief insert Swivel base
56 BSH-R70 BTK-R70 BTK-R70 + BTR-R70G + BGN-R56G/70G DKLK-R100x80
70 BSH-R70 BTK-R70 BTK-R70 + BTR-R70G DKLK-R100x80
BSH + BTK BSH + BTK + BTR + (BGN) BSH + DKLK
Tube clamp and ball joint termination
BSH BKE + (BGN) DKLK
Conduit size Tube clamp Conduit size Ball joint termination Swivel base
56 BSH-R70 56 BKE-R70G + BGN-R56G/70G DKLK-R100x80
70 BSH-R70 70 BKE-R70G DKLK-R100x80
BSH + BKE + BKS BSH + DKLK
PMA Automation Products | ABB-KAT.13 E / 7TCA292000R7459 15
Index
Products in alphabetical order
Order No. GID No. Page
BAS-29T 7TAA292850R0000 12
BAS-36T 7TAA292850R0001 12
BAS-48T 7TAA292850R0002 12
BES-70G 7TAA292850R0012 12
BGG-56 7TAA292860R0001 12
BGG-70 7TAA292860R0002 12
BGH-23 7TAA292720R0014 13
BGH-29 7TAA292720R0015 13
BGH-36 7TAA292720R0016 13
BGH-48 7TAA292720R0017 13
BGN-R29 7TAA292890R0001 8
BGN-R36 7TCA292000R7436 8
BGN-R48 7TAA292890R0004 8
BGN-R56 7TCA292000R7437 8
BGN-R56G/70G 7TAA292890R0007 9
BGN-R70 7TAA292890R0009 8
BGN-R70G 7TAA292890R0010 8
BGN-S29G 7TAA292680R0005 8
BGN-S29T 7TAA292680R0006 8
BGN-S36G 7TAA292680R0007 8
BGN-S36T 7TAA292680R0008 8
BGN-S48G 7TAA292680R0009 8
BGN-S48T 7TAA292680R0010 8
BGN-S56G 7TCA292000R7438 8
BGN-S70G 7TAA292680R0011 8
BGO-56 7TAA292860R0010 13
BGO-70 7TAA292860R0011 13
BGS-R70 7TAA292890R0011 9
BKE-R70G 7TAA292890R0012 10
BKS-R70/00 7TAA292890R0013 9
BKS-R70/01 7TAA292890R0014 9
BKS-R70/02 7TCA292000R0744 9
BKS-R70/03 7TCA292000R0745 9
BKS-R70/04 7TCA292000R0746 9
BKS-R70/05 7TCA292000R0747 9
BLH-R56G 7TCA292000R0025 11
BLH-R70G 7TCA292000R0026 11
BSH-R29 7TAA292890R0015 8
BSH-R36 7TCA292000R7433 8
BSH-R48 7TAA292890R0016 8
BSH-R56 7TCA292000R7435 8
BSH-R70 7TAA292890R0017 8
BSS-29 7TAA292850R0015 11
BSS-36 7TAA292850R0016 11
BSS-48 7TAA292850R0017 11
BSS-56G 7TAA292850R0018 11
BSV-70G 7TAA292850R0019 11
BTK-R70 7TAA292890R0018 10
BTR-R70G 7TAA292780R0022 10
DKLK-R100X80 7TAA292890R0019 11
DKLK-R100X80/01 7TAA292890R0020 11
DKLK-R56X56 7TAA292890R0021 11
Order No. GID No. Page
ESDG-56B.30 7TCA292000R7720 7
ES DG-70B.10 7TCA292000R7722 7
ESDT-29B.50 7TAA292240R0054 7
ESDT-36B.30 7TAA292240R0055 7
ESDT-48B.30 7TAA292240R0056 7
PIHG-56B.30 7TAA292360R0033 6
PIHG-70B.30 7TAA292360R0036 6
PIST-29B.50 7TAA292240R0165 6
PIST-36B.30 7TAA292240R0167 6
PIST-48B.30 7TAA292240R0169 6
POSG-70B.30 7TAA292900R0008 7
POST-29B.50 7TAA292240R0175 7
POST-36B.30 7TAA292240R0176 7
POST-48B.30 7TAA292240R0177 7
PUEG-56B.30 7TAA292360R0043 7
PUEG-70B.30 7TAA292360R0044 7
PUET-29B.30 7TAA292900R0005 7
PUET-36B.30 7TAA292900R0006 7
PUET-48B.21 7TAA292900R0007 7
SGH-23 7TAA292720R0047 13
SGH-29 7TAA292720R0048 13
SGH-36 7TAA292720R0049 13
SGH-48 7TAA292720R0050 13
SGS-36 7TAA292720R0061 13
SGS-48 7TAA292720R0062 13
SGS-56 7TAA292720R0063 13
SGS-70 7TAA292720R0064 13
XR90G-29BR.50 7TAA292240R0322 6
XR90G-36BR.30 7TAA292240R0323 6
XR90G-48BR.30 7TAA292240R0324 6
XR90G-56BR.30 7TCA292000R7415 6
XR90G-70BR.30 7TCA292000R7414 6
Contact us
©Copyright PMA-ABB Automation Products. Thomas & Betts Limited. All rights reserved. Printed in Canada. 01/17/100. Order No.KAT-13E
Note: We reserve the right to make technical
changes or modify the contents of this document
without prior notice. With regard to purchase orders
and/or contracts, the agreed particulars shall
prevail. ABB does not accept any responsibility
whatsoever for potential errors or possible lack of
information in this document. We reserve all rights
in this document and in the subject matter and
illustrations contained therein. Any reproduction,
disclosure to third parties or utilization of its con-
tents – in whole or in parts – is forbidden without
prior written consent of ABB.
Head Office
Thomas & Betts Limited
700 Thomas Avenue
Saint-Jean-sur-Richelieu,
Quebec J2X 2M9
Tel.: (450) 347-5318
Fax: (450) 347-1976
Regional Sales Offices
Atlantic Provinces
Thomas & Betts Limited
106 Chain Lake Drive, Unit 2C
Halifax, Nova Scotia B3S 1A8
Tel.: (902) 450-1307
Toll Free: 1-877-862-4357
Fax: (902) 450-1309
Quebec
Thomas & Betts Limited
5155 J.-A.-Bombardier Street
Saint-Hubert, Quebec J3Z 1G4
Toll Free: 1-800-465-1399
Fax: (450) 466-1163
Ontario
Thomas & Betts Limited
3450 Harvester Road
Burlington, Ontario L7N 3W5
Tel.: (905) 635-7888
Toll Free: 1-877-291-7771
Fax: (905) 635-7889
Manitoba/Saskatchewan
Thomas & Betts Limited
6531-148th Street, #1
Surrey, British Columbia V3S 3C5
Tel.: (604) 598-9811
Toll Free: 1-866-540-8220
Fax: (604) 598-9840
Alberta
Thomas & Betts Limited
4836 Eleniak Road
Edmonton, Alberta T6B 2S1
Tel.: (780) 424-7092
Toll Free: 1-888-664-5666
Fax: (780) 424-7093
Toll Free: 1-866-424-4082
British Columbia
Thomas & Betts Limited
6531-148th Street, #1
Surrey, British Columbia V3S 3C5
Tel.: (604) 598-9811
Toll Free: 1-866-540-8220
Fax: (604) 598-9840
