JSN NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR JUMBO CHIP SERIES CODE: JSN MARKET APPLICATIONS JSN Series (jumbo stacked naked) film capacitors have been designed for Automotive Power Electronics where high reliability and long life are essential under severe working conditions (high operating temperatures and high vibration). Some of the applications for both the 14V and 42V Powernet are the following: Integrated Starter Alternator, Camless, Common rail, Electric Power steering, climate control, DC/DC and AC/DC converters. Moreover JSN series could be used for the power electronics in electric/hybrid and fuel cell cars. JSN is made with lead frames and the suggested connection process is electrical welding. Special versions for reflow soldering are available upon request. PART NUMBERING SYSTEM 1 2 3 4 5 6 JSN 1. 2. 3. 5. 6. 7. 8. 9. 8 9 - Series code DC rated voltage D = 63V E = 100V Size code: 60.80 60.160 K L 90.80 N 4. 7 90.160 O 60.230 M 90.210 P 90.230 Q 100.80 100.160 100.210 100.230 R S T U Capacitance value Capacitance value in pico farads. Last 3 digits are significant and 1st digit indicates number of zeros that must be added to obtain the rated capacitance. Tolerance J=5% K=10% M=20% Dielectric (B=PET LS) Standard Version = 5; Special version = A-Z Packaging M=bulk; S=taped (stick); N=taped (reel); L=taped (tray) Internal use GENERAL TECHNICAL DATA Dielectric: Metallized polyester film (PET H.T.) Construction: Staked Naked capacitor with special terminals Terminals: Copper tinned lead frame. For dimensions see Figure 1. Other types of terminals are available upon request. Operating temperature range: -55C up to 125C Marking: Manufacturer's logo, series (JSN), capacitance, tolerance, D.C. rated voltage, date code. Climatic category: 55/125/56 IEC 60068-1 Storage conditions: Temperature range: 0C up to +40C Humidity: 60% R.H. max JSN NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR JUMBO CHIP SERIES CODE: JSN SIZE TABLE Rated Cap. 10F 15F 22F 33F 47F 68F 100F Size code 60.80 60.80 60.160 60.230 60.230 H max mm 4 5 4 4 6 Size code H max mm 90.80 90.80 90.160 90.210 90.230 4 5 4 5 6 Size code H max mm 100.80 100.80 100.160 100.210 100.230 5 7 5 6 7 Size code 60.80 60.160 60.210 60.230 H max mm 6 5 6 7 Size code 90.80 90.80 90.160 90.210 90.230 H max mm 5 7 5 6 7 Size code 100.80 100.80 100.160 100.210 100.230 H max mm 4 6 5 6 7 SIZE CONVERSION Size code L max W max 60.80 60.160 60.230 90.80 90.160 90.210 90.230 100.80 100.160 100.210 100.230 15.2 21.2 15.2 42.2 15.2 59.2 22.5 21.2 22.5 42.2 22.5 49.2 22.5 59.2 26.0 21.2 26.0 42.2 26.0 49.2 26.0 59.2 ELECTRICAL CHARACTERISTICS TEST METHOD & PERFORMANCE 63Vdc, 100Vdc Rated voltage (VR): Category Voltage (VC): VC=VR up to 105C. For temperatures between +105C and +125C a derating factor of 1.25% per C has to be applied. Rated temperature: +105C Capacitance range: 10F to 100F Capacitance values: E6 series Capacitance tolerance (measured at 1kHz): 10%: 20%. (Other tolerances are available upon request) Dissipation Factor (tg): 0.01 at 1kHz - T=25C5C Insulation Resistance: Test conditions T=25C5C Voltage charge time: 1 min Voltage charge: 50Vdc for VR = 63Vdc 100Vdc for VR = 100Vdc Performance 250s for VR = 63Vdc 100s for VR = 100Vdc Max pulse rise time (dv/dt): for C 50F 30V/s for C> 50F 20V/s Test voltage between terminations: 1.6 x VR applied for 2s at T=25C5 Damp heat, steady state: Test conditions Temperature: 40C 2C Relative humidity: 93% Test duration: 56 days Performance Capacitance change (C/C): 7% DF change (tg): 50x10-4 at 1kHz Insulation resistance: 50% of limit value Endurance Test conditions Temperature: 125C 2C Test duration: 2000 h Voltage applied: 1.25 x VC Performance Capacitance change (C/C): 8% DF change (tg): 50x10-4 at 1kHz Insulation resistance: 50% of limit value Rapid change of temperature Test conditions Temperature: 1 h at -55C; 1 h at +125 Number of cycles: 1000 Performance Capacitance change (C/C): 5% DF change (tg): 50x10-4 at 1kHz Insulation resistance: limit value No mechanical damage. Long term stability (after two years): Storage: standard environmental conditions. Performance Capacitance change (C/C): 3% Reliability (reference MIL HDB 217) Failure rate: 1 FIT (40C - 0.5x VR) Failure criteria Short or open circuit Capacitance change (C/C) >10% DF change (tg) > 2xinitial limit) Insulation resistance: < 0.005 x initial value Mounting & Connection: Electrical welding is preferred. CAUTION: Hand assembly The capacitors are protected against mechanical contact on the cutting surface and the capacitor body during the handling operations. In case of hand assembly with soldering iron the following recommendations must be taken: Max temperature on the soldering iron: 250C for max 5s Contact between the soldering iron and the body of the capacitor must be avoided.