SBT350-10R Ordering number : ENN7805 SBT350-10R Schottky Barrier Diode (Twin Type * Cathode Common) 100V, 35A Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * * * * * Guaranteed up to Tj=150C. Low forward voltage (VF max=0.80V). Short reverse recovery time. Low switching noise. High reliability due to highly reliable planar structure. Attachment workability is good by Mica-less package. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Conditions Ratings VRRM VRSM Average Output Current IO Surge Forward Current IFSM 50Hz resistive load, Sine wave Tc=44C 50Hz sine wave, 1 cycle Unit 100 V 105 V 35 A 160 A Junction Temperature Tj --55 to +150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance C Thermal Resistance Rth(j-c) Conditions IR=5mA, Tj=25C* IF=14A, Tj=25C* Ratings min typ max 100 VR=50V, Tj=25C* VR=10V, Tj=25C* Junction-Case : Smoothed DC Unit V 0.80 V 0.5 mA 2.0 C / W 450 pF Note) * : Value per element Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31505SD TS IM TB-00001330 No.7805-1/3 SBT350-10R Package Dimensions unit : mm 1180B Electrical Connection Anode 16.0 3.4 Anode 5.6 Cathode 2.0 21.0 22.0 5.0 8.0 3.1 2.0 20.4 4.0 2.8 2.0 1.0 0.6 2 1 : Anode 2 : Cathode 3 : Anode 3 3.5 1 5.45 IF -- VF Represented by max 5 50C Tj=1 3 25C 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 max 0C yp C t 150 2 5 Tj=1 100 7 5 125 3 2 yp C t C 100 typ 10 7 5 3 2 0.01 0.5 1.0 1.5 Forward Voltage, VF -- V (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 45 40 (4) (3) 35 (2) Rectangular wave 30 25 (1) 20 360 15 Sine wave 10 5 180 360 0 0 5 10 15 20 25 20 40 30 Average Forward Current, IO -- A 35 40 IT09156 60 80 100 Reverse Voltage, VR -- V IT09148 PF(AV) -- IO 50 0 2.0 Average Reverse Power Dissipation, PR(AV) -- W 0 Average Forward Power Dissipation, PF(AV) -- W IR -- VR 7 Reverse Current, IR -- mA 100 7 5 3 2 Forward Current, IF -- A SANYO : TO-3PML 5.45 35 30 120 IT09155 PR(AV) -- VRM (1)Rectangular wave =300 (2)Rectangular wave =240 (3)Rectangular wave =180 (4)Sine wave =180 (1) (2) 25 Rectangular wave 20 (3) VR 15 10 Sine wave 360 (4) VR 180 5 360 0 0 20 40 60 80 Peak Reverse Voltage, VRM -- V 100 120 IT09157 No.7805-2/3 SBT350-10R Tc -- IO 160 120 f=100kHz 2 Interterminal Capacitance, C -- pF Case Temperature, Tc -- C 140 Sine wave 100 360 180 80 60 40 Rectangular wave 20 (1) 360 (2) (4) 1000 7 5 3 2 (3) 100 0 10 5 15 20 25 30 Average Output Current, IO -- A 35 40 IFSM -- t 200 Current waveform 50Hz sine wave IS 160 20ms t 120 80 40 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 5 7 1.0 2 3 ID01113 2 3 5 7 10 2 3 5 Reverse Voltage, VR -- V IT09158 Transient Thermal Resistance, Rth(j-c) -- C / W 0 Surge Forward Current, IFSM(Peak) -- A C -- VR 3 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 5 7 100 2 ID01112 Rth(j-c) -- t 3 2 1.0 7 5 3 2 0.1 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Time, t -- s 2 ID01114 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.7805-3/3