General Purpose Accessories Potter & Brumfield Sockets & Accessories, K10 Relays n Sockets for 2 pole relays with solder terminals or screw terminal sockets n Hold down springs n Plates and brackets permit various mounting options n Solder, PCB Approvals Ordering Code UL E59244, CSA LR15734 Technical data of approved types on request Technical Data Socket contact materialSpring brass, tin plated Socket body material Solder and PCB terminal models Nylon Screw terminal modelsGlass-filled polyester Maximum current 10A Product Poles Code 27E488 27E489 2 2 Terminal type Part number solder terminals PCB terminals 2-1419106-0 2-1419106-1 Dimensions 27E489 socket with printed circuit terminals 27E488 socket with solder terminals .844 (21.44) .440 (11.18) .075 (1.90) 1.158 (29.41) .012 (0.30) .844 (21.44) .440 (11.18) 1.158 (29.41) .012 (0.30) .072 x .140 (1.83 x 3.56) .070 (1.78) .770 (19.56) .075 (1.90) .184 (4.69) .078 (1.98) Recommended chassis cutout for solder terminal socket 27E488 .850 .0 05 (21.79 .13) 1.015 .0 05 (28.07 .13) Recommended Chassis Thickness .039 (.99) to .079 (2.01) Caution: Printed circuit sockets are manufactured with "floating" (Loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. PC board layout (bottom view) for PCB terminal socket 27E489 .113 (2.87) .507 (12.88) .672 (17.07) .620 (15.75) 10-2012, Rev. 1012 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions .086 DIA. TYP. (2.18) .417 (10.59) .185 (4.70) Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 457 General Purpose Accessories Potter & Brumfield Sockets & Accessories, K10 Relays (Continued) Ordering Code Ordering Code Product Terminal type Code 27E895 27E487 screw terminals Mounting Part number DIN rail snap mount Conventional 2-1419106-7 1-1419106-9 Product Code Description Part number 20C217 Relay hold down spring use with 27E488 and 27E489 Relay hold down spring use with 27E487 and 27E895 Mounting strip - accepts eight 27E488 Mounting track Steel mounting clip with #6-32 screw use with 27E487 on 24A110 track Plastic twist mounting clip use with 27E487 on 24A110 track Plastic insulator - use with 24A071 to make end clip for 24A110 track 1419111-2 Dimensions and terminal location 20C426 Screw terminal, DIN rail, snap-mount socket 27E895 37D633 24A110 24A071 1.036 (26.31) 4 3 2 1 24A072 1.299 (32.99) 40G432 5-1393159-4 9-1393159-5 Dimensions .170 TYP. (4.32) B A 8 7 37D633 mounting strip .629 (15.98) .669 (16.99) 1.178 (29.92) 1419111-7 1419111-6 1419111-5 All accessories must be ordered separately. 2.598 (65.99) .315 TYP. (8.00) 5-1393159-1 5 6 .25 (6.4) Top view 1.323 (33.60) 1.388 (35.26) 1.388 (35.26) .617 (15.67) 1.750 (44.45) 1.015 (25.78) .995 (25.27) .090 (2.29) .429 (10.90) .858 (21.79) .13 (3.3) Screw terminal socket 27E487 .090 R. (2.29) .16 .180 (4.1) (4.57) .065 .32 (1.65) (8.1) 37D633 will mount eight solder terminal sockets in one length of aluminum strip measuring 10.97" x 2.25" x .062 (278.6 x 57.15 x 1.57) 1.130 (28.70) 4 3 2 1 24A110 DIN rail style mounting track 1.375 (34.93) 2.750 (69.85) 3.00 (76.2) 6.00 (152.4) 36.00 .060 (914.4 1.52) 1.375 .010 (34.93 .254) .156 TYP. (3.96). 8 .313 TYP. (7.94) 6 5 Top view 1.385 (35.18) .312 (7.92) 7 1.045 (26.54) .750 (19.05) .187 (4.75) .405 .0 07 (10.29 .178) 24A110 mounting track is designed to accept snap-mount sockets, as well as other P&B screw terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers. Track can be cut to shorter lengths or used end-to-end. Track and mounting accessories .200 (5.08) 24A110 40G432 24A072 24A071 458 10-2012, Rev. 1012 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change.