228433-5 - TE CONNECTIVITY - Product.Network

For more information, visit commscope.com

LightCrimp Plus Optical Fiber Connectors & Accessories

System Overview

AMP NETCONNECT

Optical Fiber Terminations In Less Than a Minute

With AMP NETCONNECT LightCrimp Plus optical ﬁber connectors from

CommScope you can terminate optical ﬁbers for premises cabling and

ﬁber-to-the-desk applications in less than a minute.

AMP NETCONNECT LightCrimp Plus optical ﬁber connectors use CommScope’s crimp technology

to make ﬁber optic terminations a quick, clean and simple mechanical process. Only a few tools,

and in most circumstances, little training are required. With LightCrimp Plus optical ﬁber products, you

can terminate ﬁbers without epoxy, polishing papers, ovens, UV lamps, or electrical power for ﬁeld

termination tooling.

Convenient side latches allow you to remove module covers without removing the base from the

mounting surface. This speeds MACs (Moves, Adds and Changes) without needing to unplug existing,

active connections. For facilities requiring additional security in work areas and classroom environments,

the cover can be screwed shut to prevent unauthorized access. Pre-scored knockouts allow compatibility

with most surface mount raceway systems as well as modular furniture raceways.

Key Features

• Quick and easy ﬁber termination process

• Terminations take under a minute

• Easy termination procedure

• No polishing needed: simply strip and

cleave the ﬁber, then crimp the connector

• Factory-polished to a consistent, high-quality

end ﬁnish - ensures reliable physical contact

and eliminates return loss concerns

• No need for epoxy, curing ovens

or electricity

• LC, SC and ST-Style connectors

• No set-up required, ideal for low ﬁber

count installs

• No workstation required

• Lowest applied labor costs

• Exceeds connectors performance

requirements of ANSI/TIA-568-C.3

• Same tool kit for single-mode and

multimode terminations

• No epoxy, no polish, no curing

• Three step termination: Strip, cleave, crimp

• Easiest and quickest ﬁber termination available

• Ceramic ferrules

• Compliant with ANSI/TIA-568-C.3

• Factory polished for high consistency

• Little or no setup or tear-down time

• LC and SC Duplex clips join two simplex

connectors creating one duplex connector

LightCrimp Plus Optical Fiber Connectors and Accessories

For more information, visit commscope.com2

Surface Mount Modules and Accessories

D F

Key Features

Connector Type Fiber Type Housing Color Boot Color For Use With Figure Part Numbers

LC Simplex

Single-mode, UPC Blue Blue 900 µm buffered and 250 µm coated ﬁbers A6754482-1

1.6 to 2.0 mm Jacketed Cable 1918626-1

Single-mode, APC Green Blue 900 µm buffered and 250 µm coated ﬁbers B2064181-1

XG Multimode, 50 µm Beige Aqua 900 µm buffered and 250 µm coated ﬁbers 6754483-4

1.6 to 2.0 mm Jacketed Cable 1918627-3

Multimode, 50 µm Beige Black 900 µm buffered and 250 µm coated ﬁbers 6754483-2

1.6 to 2.0 mm Jacketed Cable 1918627-2

Multimode, 62.5 µm Beige Beige 900 µm buffered and 250 µm coated ﬁbers C6754483-1

1.6 to 2.0 mm Jacketed Cable 1918627-1

LC Duplex

Single-mode, UPC Blue Blue 900 µm buffered and 250 µm coated ﬁbers 6754484-1

XG Multimode, 50 µm Beige Aqua 900 µm buffered and 250 µm coated ﬁbers 6754485-4

Multimode, 50 µm Beige Black 900 µm buffered and 250 µm coated ﬁbers 6754485-2

Multimode, 62.5 µm Beige Beige 900 µm buffered and 250 µm coated ﬁbers 6754485-1

Duplex Clip, LC

Black Simplex LightCrimp Plus LC Connectors (6 clips per pack) D1754371-1

Blue Simplex LightCrimp Plus LC Connectors (6 clips per pack) 1754371-4

Beige Simplex LightCrimp Plus LC Connectors (6 clips per pack) 1754371-5

SC Simplex

Single-mode, UPC Blue Blue 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable E6693276-1

Single-mode, APC Green Blue 900 µm buffered and 250 µm coated ﬁbers 2064184-1

XG Multimode, 50 µm Beige Aqua 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6588291-2

Multimode, 50 µm Beige Black 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6278079-2

Multimode, 62.5 µm Beige Beige 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 5492643-1

SC Duplex

Single-mode, UPC Blue Blue 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6693278-1

XG Multimode, 50 µm Beige Aqua 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6588292-2

Multimode, 50 µm Beige Black 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6278080-2

Multimode, 62.5 µm Beige Beige 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6278009-1

Duplex Clip, SC

Black Simplex LightCrimp Plus SC Connectors (1 set per pack) F6348522-1

Green Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-2

Blue Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-3

Beige Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-4

Single-mode, UPC Metallic Black 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 1828953-3

XG Multimode, 50 µm Metallic Aqua 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 6278082-2

Multimode, 50 µm Metallic Black 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable G6278082-1

Multimode, 62.5 µm Metallic Beige 900 µm buffered ﬁbers, 250 µm coated ﬁbers, and 3mm Jacketed Cable 5492642-2

LightCrimp Plus Optical Fiber Connectors and Accessories

For more information, visit commscope.com3

LightCrimp Plus Termination Tool Kits and Accessories

Description

Terminates:

Part NumbersLightCrimp Plus LightCrimp ALL MT-RJ

LC SC ST SC ST

Universal No-epoxy/No-polish Termination Kit XX X X 1278118-4

LightCrimp Plus LC/SC Connector Termination Kit X X 1754845-1

LightCrimp Plus ST Connector Termination Kit X 492697-1

Deluxe Premise Termination Kit X X X X X X 1278949-2

LightCrimp Plus Combination Adaptive Termination Kit X X X 1754739-2

LightCrimp Plus LC/SC Adaptive Termination Kit X X 1754846-1

LightCrimp Plus ST Adaptive Termination Kit X 1754738-1

LC Connector Upgrade Termination Kit Adds functionality to terminate LightCrimp Plus LC

Connectors To Other Adaptive Tool Kits 1754847-2

Deluxe Premise

Termination Tool Kit

Key Features

• Adaptive tool kits are a cost-effective, upgradable solution, if common ﬁber and cable preparation tools are already available.

• Termination tool kits come with a high quality, soft carrying case and are equipped with all the necessary tools required to terminate the listed, ﬁeld

installable connectors.

• All kits come with LightCrimp Plus connector termination instructions and instructional CD-ROM. The CD-ROM is also available separately by requesting part

number 1374503-1. Please contact your local sales engineer to request your copy, or call our customer service department at 800-553-0938.

LightCrimp Plus Optical Fiber Connectors and Accessories

Pre-polished Connectors

Since AMP NETCONNECT LightCrimp Plus

connectors are factory polished, all you have to

do is strip cable, prepare and cleave the ﬁber,

and crimp the connector. There is no setup time

required and you get a more consistent, high

quality end-face ﬁnish. When compared to

epoxy/hand polished connectors.

LightCrimp Plus Connectors

Are Rugged

LightCrimp Plus connectors offer consistent

polish, crimp quality, and long term

performance that’s on par with standard epoxy

style connectors.

LightCrimp Plus connectors meet or exceed

the relevant ANSI/TIA, IEC, and EN optical

and mechanical speciﬁcations and operate in

temperatures ranging from -10˚ to +60˚ C.

Tool Kit Upgrades

The tooling used to crimp LightCrimp Plus

connectors can also be used with LightCrimp

connectors. For existing users of LightCrimp or

other, pre-polished connectors, CommScope

offers upgrade tool kits to make the transition

to LightCrimp Plus connectors easier and more

cost effective.

Performance Characteristics

LightCrimp Plus connectors have been tested

per industry FOTPs (Fiber Optic Test Procedures)

and meet or exceed all requirements in the

Connector Performance Speciﬁcation Annex of

ANSI/TIA-568-C.

LightCrimp Plus connectors utilize ceramic

ferrules and yield terminations with typical

Insertion Loss of 0.2 dB for single-mode, and

0.3 dB for multimode.

Description Part Number

Kit Contents and Quantities

1278118-4

1754845-1

492697-1

1278949-2

1754739-2

1754846-1

1754738-1

1754847-2

Premium, soft shell, carrying case 1278540-1 1 1 1 1 1 1 1

Strip tool, ﬁber combination 1754708-1 1 1 1 1 – – – –

KEVLAR shears 1278637-1 1 1 1 1 – – – –

Wrench, ¼ inch, open end 1278422-1 2 2 2 2 2 2 2 2

PRO-CRIMPER III Hand Tool 2064431-1 – 1 – – 1 1 1 –

PRO-CRIMPER III Hand Tool with die set for LightCrimp

Plus LC and SC Connectors 2064603-1 1 – – – – – – –

PROCRIMPER III Hand Tool with die set for LightCrimp

Plus ST Connectors 492623-1 – – 1 – – – – –

PROCRIMPER III Hand Tool with die set for LightCrimp

and LightCrimp Plus SC Connectors 492782-1 – – – 1 – – – –

LightCrimp Plus LC die set for PROCRIMPER III Hand Tool 1754136-1 – – – 1 – – – 1

LightCrimp Plus ST die set for PROCRIMPER III Hand Tool 492622-1 1 – – 1 1 – 1 –

LightCrimp Plus LC and SC die set for PROCRIMPER

III

Hand Tool 1985766-1 – 1 – – 1 1 – –

LightCrimp Plus SC die set for PROCRIMPER III Hand Tool 492783-1 – – – – 1 – – –

LightCrimp Plus LC and SC cable/buffer holder 2064540-1 1 1 – – 1 1 – –

LightCrimp Plus LC cable/buffer holder 1754138-1 – – – 1 –– – 1

LightCrimp Plus SC cable/buffer holder 1278023-1 – – – 1 1 – – –

LightCrimp Plus ST cable/buffer holder 492703-1 1 – 1 1 1 – 1 –

Alcohol ﬁber wipe 501857-2 14 14 14 14 – – – –

OPTIMATE cable stripper 501198-1 1 – – – – – – –

Micro-stripper, MT-RJ 492109-2 1 1 – 1 – –– –

Actuation key, MT-RJ 1278576-1 2 – – 2 – – – –

Strip Template, MT-RJ 1278598-1 1 – – 1 – – – –

Label, termination kit 1374331-1 1 – – – – – – –

CD-ROM, termination training 1374503-1 1 1 1 1 1 1 1 –

Fiber Optics Cleaning and Inspection Guide 2064710-1 1 1 1 1 1 1 1 –

Ball end hex key (5) 1457999-1 1 – – 1 – – – –

Fiber cleaver, slide cutter 1871696-1 1 1 1 1 1 1 1 –

Cable Slitter, 2 mm 2064453-2 1 1 – – – 1 – –

Cable Clamp 1278625-1 1 1 – 1 – 1 – 1

200x Microscope Kit 1754767-1 – – – – – – – –

200x Microscope Adapter, MT-RJ 1754768-1 – – – – – – – –

200x Microscope Adapter, 1.25 mm 1754765-1 – – – – – – – –

LightCrimp Cleave Tool 503705-1 – – – 1 – – – –

LightCrimp ST Strip Template 503574-1 – – – 1 – – – –

LightCrimp SC Strip Template 503694-1 – – – 1 – – – –

Polishing Plate, 8.5 x 11 inches 501197-1 – – – 1 – – – –

Polishing Pad, Rectangular 504584-1 – – – 1 – – – –

Polishing Pad, Circular 501523-1 – – – 1 – – – –

Polishing Film, 0.3 µm 228433-5 – – – 10 – – – –

Polishing Film, 0.5 µm 228433-8 – – – 10 – – – –

LightCrimp ST Polishing Bushing, Black 503304-1 – – – 1 – – – –

LightCrimp ST Polishing Bushing, Beige 503304-2 – – – 1 – – – –

LightCrimp SC Polishing Bushing 502631-1 – – – 5 – – – –

Scissors 501014-1 – – – 1 – – – 1

www.commscope.com

Visit our website or contact your local CommScope representative for more information.

LightCrimp Plus, AMP NETCONNECT, PRO-CRIMPER, OPTIMATE and all trademarks identiﬁed by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.

This document is for planning purposes only and is not intended to modify or supplement any speciﬁcations or warranties relating to CommScope products or services.

PS-313912-AE (12/15)