22DILEM - EATON MOELLER - Product.Network

Type: 22DILEM

Article No.: 010112

Ordering information

Connection technique Screw terminals

Description 4−pole

Conventional thermal current I th = I e

AC−1 Open Ith = IeA 10

Contacts N/O = Normally open 2 N/O

Contacts N/C = Normally closed 2 N/C

Can be combined with contactor DILE(E)M−10(−G)(...)

DILEM−4(−G)(...)

Contact sequence

Notes concerning the product group

Auxiliary contact module contacts:

...DILEM to EN 50 012

...DILE to EN 50 005

Contacts to EN 50012 should be given preference.

Auxiliary contact modules with interlocked opposing contacts.

Not in the case of early−make or late−break contacts

General

Standards IEC/EN 60947, VDE 0660,

CSA, UL

Maximum operating frequency

Mechanical Ops./h 9000

Climatic proofing

Damp heat, constant, to IEC

60068−2−78

Damp heat cyclic to IEC

60068−2−30

Ambient temperature

Open °C −25/50

Enclosed °C −25/40

Mechanical shock resistance (IEC/EN

60068−2−27)

Half−sinusoidal shock, 10 ms

Basic unit without auxiliary contact

module

Main contacts, make contacts g 10

Main contacts Make/break contacts g 10/8

Basic unit with auxiliary contact

module

Main contacts make contact g 10

Auxiliary contacts Make/break

contacts g 20/20

Protection type IP 20

Protection against direct contact

when actuated from front (IEC 536) Finger and back−of-hand

proof

Terminal capacity of auxiliary and

main contacts

Solid mm21 × (0.75 – 2.5)

2 × (0.75 – 2.5)

Flexible with ferrule mm21 × (0.75 – 1.5)

2 × (0.75 – 1.5)

Solid or stranded AWG 18 – 14

Terminal screw M3.5

Pozidriv screwdriver Size 2

Standard screwdriver mm 0.8 × 5.5

1 × 6

Max. tightening torque Nm 1,2

Terminal capacity springloaded

terminals main and control circuits

Solid mm21 × (1 – 2.5)

2 × (1 – 2.5)

Flexible with ferrule mm21 × (1 – 2.5)

2 × (1 – 2.5)

Standard screwdriver mm 0.6 × 3.5

Main conducting paths

Rated impulse withstand voltage Uimp V AC 6000

Overvoltage category/pollution

degree III/3

Rated insulation voltage

AC UiV AC 690

Rated operational voltage

Rated operational voltage UeV AC 690

Safe isolation to VDE 0106 Part 101

and Part 101/A1

between coil and contacts V AC 300

between the contacts V AC 300

Making capacity (cos to IEC/EN

60947) A 110

Breaking capacity

220/230 V A 90

380/400 V A 90

500 V A 64

660/690 V A 54

Short−circuit protection maximum

fuse

Type “2” coordination gL/gG A 10

Type “1” coordination gL/gG A 20

AC−1 duty

conv. therm. current 3 pole 50 – 60

open

at 40 °C Ith A 22

at 50 °C Ith A 20

at 55 °C Ith A 19

enclosed Ith A 16

AC−3 duty

Rating, AC−3 motor load switch

380/400 V PkW 4

AC−4 duty

AC−4

380/400 V PkW 3

Operations

Magnet systems

Duty factor % DF 100

Switching times at 100 % Uc

Reversing contactors

Arcing time at 690 V AC ms max. 12

Auxiliary contacts

Interlocked opposing contacts to ZH

1/457, including auxiliary contact

module Yes

Rated impulse withstand voltage Uimp V AC 6000

Overvoltage category/pollution

degree III/3

Rated insulation voltage UiV AC 690

Rated operational voltage

Rated operational voltage UeV AC 600

Safe isolation to VDE 0106 Part 101

and Part 101/A1

between coil and auxiliary contacts V AC 300

between the auxiliary contacts V AC 300

Rated operational current

AC–15

220/240 V IeA 4

380/415 V IeA 2

500 V IeA 1,5

DV−13

Contacts in series:

1 24 V A 2,5

2 60 V A 2,5

3 100 V A 1,5

3 220 V A 0,5

Conventional thermal current Ith A 10

Control circuit reliability (at Ue = 24 V

DC, Umin = 17 V, I min= 5.4 mA) Failure rate −8, < one failure at 100

million operations

Component lifespan at Ue = 240 V

AC–15 Operations × 1060,2

DC−13

L/R = 50 ms: 2 contacts in series at Ie

= 0.5 A Operations × 1060,15

Short−circuit rating without welding

Maximum overcurrent protective

device PKZM0−4

Short−circuit protection maximum

fuse

500 V A

gG/gL 6

500 V A fast 10

Current heat loss at Ith

Per contact W 0,2

Notes

At maximum permissible

ambient temperature.

Smoothed DC or

three−phase bridge rectifier

Making and breaking

conditions to DC−13, time

L/R constant as stated

Mounting position

As required except vertical with terminals A1/A2 at the bottom

Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn

E−Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net